11.2 Colour, Magnetism, Catalysis, Complexes, Dichromate and Permanganate
A partly filled d subshell makes transition-metal ions coloured (d–d transitions) and paramagnetic ($\mu=\sqrt{n(n+2)}\ \mathrm{BM}$), and makes the metals good catalysts, complex-formers, hosts for interstitial atoms and partners in alloys. Two of their compounds, $\mathrm{K_{2}Cr_{2}O_{7}}$ and $\mathrm{KMnO_{4}}$, are the oxidising agents of the analytical laboratory.
A roadside breath-analyser of the older kind was a glass tube of orange crystals: a driver blew through it, and if the tube turned green past a mark, there was too much ethanol in the breath. The orange solid was potassium dichromate; the green product was chromium(III). A few purple crystals of potassium permanganate dropped into a bucket of water make a pink disinfectant once used to wash vegetables and wells; drip the same solution into acidified iron(II) sulphate and the purple colour vanishes drop after drop until, at the very last drop, a permanent pale pink appears and tells the analyst that every iron(II) ion has been oxidised.
Colour, oxidising power, catalysis and magnetism all come from the partly filled d subshell met in Section 11.1. In this section we explain why transition-metal ions are coloured and how their magnetic moments reveal the number of unpaired electrons, then why these metals are such good catalysts, why they form complexes, interstitial compounds and alloys. The second half is devoted to potassium dichromate and potassium permanganate — their preparation, structures, the chromate–dichromate equilibrium, and their oxidising reactions in acidic, neutral and alkaline solution, all with balanced equations. We use oxidation numbers, half-reactions and $n$-factors from Section 7.1, electrode potentials from Section 7.3, and the photon energy $E=hc/\lambda$ from Section 2.1.
Colour and magnetic properties
In a free gaseous ion the five d orbitals have exactly the same energy. In a compound or in solution, however, the ion is surrounded by ligands — water molecules in an aqueous ion, oxide or chloride ions in a solid. Their lone pairs repel the d electrons, but not equally in all five orbitals: orbitals pointing towards the ligands are raised in energy more than those pointing between them, and the d set splits into groups of different energy. (The details of this crystal-field splitting are the subject of Unit 12, Section 12.3.) For most ions the gap corresponds to the energy of a photon of visible light.
A d–d transition is the jump of an electron from a lower-energy d orbital to a vacant (or half-vacant) higher-energy d orbital of the same ion, caused by absorption of a photon whose energy equals the gap, $\Delta E=h\nu=hc/\lambda$.
When white light passes through the substance, the absorbed wavelengths are removed; the light that reaches the eye is the complementary colour of the absorbed one (the colour opposite it on the colour wheel). An ion absorbing yellow-green light looks violet; one absorbing orange-red light looks blue.
- A d–d transition needs at least one d electron and a vacancy in the d subshell: ions with $d^{1}$ to $d^{9}$ are usually coloured.
- $d^{0}$ and $d^{10}$ ions are colourless: $\mathrm{Sc^{3+}}$, $\mathrm{Ti^{4+}}$ ($d^{0}$); $\mathrm{Cu^{+}}$, $\mathrm{Zn^{2+}}$, $\mathrm{Cd^{2+}}$, $\mathrm{Hg^{2+}}$ ($d^{10}$). Their compounds are white unless the anion is coloured.
- The colour depends on the size of the gap, so it changes with the oxidation state of the metal and with the ligand: $\mathrm{[Cu(H_{2}O)_{4}]^{2+}}$ is pale blue, $\mathrm{[Cu(NH_{3})_{4}]^{2+}}$ deep blue; hydrated $\mathrm{CuSO_{4}\cdot5H_{2}O}$ is blue but anhydrous $\mathrm{CuSO_{4}}$ is almost white (with sulphate as ligand the gap is smaller and the absorption moves out of the visible).
- Intense colours of $d^{0}$ oxoanions — $\mathrm{MnO_{4}^{-}}$ purple, $\mathrm{CrO_{4}^{2-}}$ yellow, $\mathrm{Cr_{2}O_{7}^{2-}}$ orange — are not d–d colours. There an electron jumps from an oxygen-based orbital to an empty metal d orbital (charge transfer), which absorbs much more strongly.
| Ion (aq) | d count | colour | Ion (aq) | d count | colour |
|---|---|---|---|---|---|
| $\mathrm{Sc^{3+}}$ | $d^{0}$ | colourless | $\mathrm{Mn^{2+}}$ | $d^{5}$ | pale pink |
| $\mathrm{Ti^{3+}}$ | $d^{1}$ | purple | $\mathrm{Fe^{2+}}$ | $d^{6}$ | pale green |
| $\mathrm{Ti^{4+}}$ | $d^{0}$ | colourless | $\mathrm{Fe^{3+}}$ | $d^{5}$ | yellow |
| $\mathrm{V^{2+}}$ | $d^{3}$ | violet | $\mathrm{Co^{2+}}$ | $d^{7}$ | pink |
| $\mathrm{V^{3+}}$ | $d^{2}$ | green | $\mathrm{Ni^{2+}}$ | $d^{8}$ | green |
| $\mathrm{Cr^{2+}}$ | $d^{4}$ | blue | $\mathrm{Cu^{+}}$ | $d^{10}$ | colourless |
| $\mathrm{Cr^{3+}}$ | $d^{3}$ | violet | $\mathrm{Cu^{2+}}$ | $d^{9}$ | blue |
| $\mathrm{Mn^{3+}}$ | $d^{4}$ | violet | $\mathrm{Zn^{2+}}$ | $d^{10}$ | colourless |
The very pale colours of $\mathrm{Mn^{2+}}$ and $\mathrm{Fe^{3+}}$ (both $d^{5}$ with five parallel spins) have a reason: any d–d jump in a high-spin $d^{5}$ ion would have to reverse a spin, and such transitions are hundreds of times less probable, so they absorb only weakly.
Magnetic properties. Every electron behaves as a tiny magnet because of its spin (and, in an atom, its orbital motion). In a filled orbital the two opposite spins cancel; an unpaired electron leaves a net magnetic moment. Substances are classified by how they respond to an applied magnetic field (compare the $\mathrm{O_{2}}$ and $\mathrm{N_{2}}$ molecules of Section 3.4).
A diamagnetic substance (all electrons paired) is weakly repelled by a magnetic field: $\mathrm{Zn^{2+}}$, $\mathrm{Cu^{+}}$, $\mathrm{Sc^{3+}}$, $\mathrm{KMnO_{4}}$.
A paramagnetic substance (one or more unpaired electrons) is attracted into a magnetic field; the attraction grows with the number of unpaired electrons and disappears when the field is removed: $\mathrm{CuSO_{4}\cdot5H_{2}O}$, $\mathrm{MnSO_{4}}$, $\mathrm{K_{2}MnO_{4}}$.
A ferromagnetic substance is an extreme form of paramagnetism in which the moments of neighbouring atoms line up together in domains; the attraction is very strong and the substance can be permanently magnetised. Fe, Co and Ni (and alloys such as alnico) are ferromagnetic.
A paramagnetic sample is pulled into the field and appears heavier on a balance placed between the poles of a magnet (the Gouy method); this measures its magnetic moment.
For the first transition series the orbital motion of the d electrons is largely "quenched" by the surrounding ligands, so the measured moment comes almost entirely from the electron spins. The moment is expressed in Bohr magnetons (BM), the natural unit of electron magnetism, $1\ \mathrm{BM}=\dfrac{eh}{4\pi m_{e}}=9.27\times10^{-24}\ \mathrm{J\,T^{-1}}$.
For an ion with $n$ unpaired electrons, if the orbital contribution is negligible (a good approximation for first-row ions),
$$\mu=\sqrt{n(n+2)}\ \mathrm{BM}.$$| $n$ | 0 | 1 | 2 | 3 | 4 | 5 |
|---|---|---|---|---|---|---|
| $\mu$ / BM | 0 | 1.73 | 2.83 | 3.87 | 4.90 | 5.92 |
Reverse use: from a measured $\mu$, solve $n(n+2)=\mu^{2}$ for the nearest whole number $n$, then identify the ion. Values a little above the spin-only figure (e.g. $\mathrm{Co^{2+}}$, measured 4.4–5.2 BM against 3.87) mean some orbital contribution survives.
Assumption used in this section: aqueous and other "simple" ions are high-spin — d electrons occupy the five orbitals singly before pairing (Hund's rule), so $n$ = number of unpaired electrons in the free ion. With strong ligands such as $\mathrm{CN^{-}}$ electrons may pair up and $n$ changes; that is treated in Unit 12.
Iron(II) and iron(III) ions in water: which has the larger spin-only magnetic moment, and what is it?
Which of the following is diamagnetic and coloured?
Catalytic behaviour, complex formation, interstitial compounds and alloys
Many of the most important industrial catalysts are transition metals or their compounds, and so are the active centres of many enzymes. Two features of the metals are responsible.
1. Variable oxidation states. A metal ion can take electrons from one reactant and pass them to another, being oxidised and reduced in turn; it ends unchanged but provides a lower-energy path. Example: in the contact process vanadium(V) oxide oxidises $\mathrm{SO_{2}}$ and is re-oxidised by $\mathrm{O_{2}}$:
$$\mathrm{V_{2}O_{5}(s)+SO_{2}(g)\rightarrow V_{2}O_{4}(s)+SO_{3}(g)}$$ $$\mathrm{2V_{2}O_{4}(s)+O_{2}(g)\rightarrow 2V_{2}O_{5}(s)}$$2. Surface adsorption (heterogeneous catalysis). The metal surface forms weak bonds to reactant molecules using its d (and s) orbitals. This raises the concentration of reactants at the surface and weakens their internal bonds (e.g. H–H, N≡N), lowering the activation energy. The bonds to the surface must be neither too weak (no activation) nor too strong (products would not leave).
Examples: Fe (with $\mathrm{K_{2}O}$, $\mathrm{Al_{2}O_{3}}$ promoters) in the Haber process, $\mathrm{N_{2}(g)+3H_{2}(g)\rightleftharpoons 2NH_{3}(g)}$; Ni in the hydrogenation of vegetable oils; Pt in the oxidation of $\mathrm{NH_{3}}$ to NO (nitric acid manufacture) and Pt/Pd/Rh in car exhaust converters; $\mathrm{MnO_{2}}$ in the decomposition of $\mathrm{KClO_{3}}$; $\mathrm{TiCl_{4}}$ with $\mathrm{Al(C_{2}H_{5})_{3}}$ (Ziegler–Natta catalyst) for making polythene.
A neat homogeneous example is the reaction between iodide and peroxodisulphate ions, $\mathrm{S_{2}O_{8}^{2-}(aq)+2I^{-}(aq)\rightarrow 2SO_{4}^{2-}(aq)+I_{2}(aq)}$. It is slow, because two negative ions must collide. A trace of iron(III) speeds it up: $\mathrm{Fe^{3+}}$ oxidises iodide, and the $\mathrm{Fe^{2+}}$ formed is re-oxidised by peroxodisulphate — each step pairs ions of opposite charge (Example 3).
Complex formation. Transition-metal ions bind molecules or anions that have lone pairs — ligands such as $\mathrm{H_{2}O}$, $\mathrm{NH_{3}}$, $\mathrm{Cl^{-}}$, $\mathrm{CN^{-}}$ — through coordinate bonds, forming complex ions: $\mathrm{[Fe(CN)_{6}]^{3-}}$, $\mathrm{[Fe(CN)_{6}]^{4-}}$, $\mathrm{[Cu(NH_{3})_{4}]^{2+}}$, $\mathrm{[Ni(CN)_{4}]^{2-}}$, $\mathrm{[PtCl_{4}]^{2-}}$. Adding ammonia to pale-blue copper(II) sulphate solution gives the deep-blue complex,
$$\mathrm{Cu^{2+}(aq)+4NH_{3}(aq)\rightarrow [Cu(NH_{3})_{4}]^{2+}(aq)}.$$- Small size and high charge of the ions give a high charge density that attracts lone pairs strongly.
- Vacant d orbitals of suitable energy (with the nearby $s$ and $p$ orbitals) can accept the lone pairs of the ligands.
The s-block ions, large and with no low-lying d orbitals, form few complexes. Werner's theory, nomenclature, isomerism and bonding of complexes are developed fully in Unit 12 (Section 12.1).
An interstitial compound is formed when small atoms — H, B, C or N — occupy the empty spaces (interstices) between the metal atoms of a crystal lattice, without changing the metal's structure much. Examples: $\mathrm{TiC}$, $\mathrm{Mn_{4}N}$, $\mathrm{Fe_{3}H}$, $\mathrm{VH_{0.56}}$, $\mathrm{TiH_{1.7}}$.
Characteristics: (i) they are usually non-stoichiometric (formulas such as $\mathrm{VH_{0.56}}$ do not follow normal valencies) and are neither typically ionic nor covalent; (ii) their melting points are higher than those of the pure metals; (iii) they are very hard (some borides approach diamond); (iv) they keep metallic conductivity; (v) they are chemically rather inert. Steel and cast iron owe much of their hardness to carbon held in this way.
An alloy is a blend of a metal with one or more other metals (or a non-metal such as carbon), made by mixing the molten components and cooling them; most are homogeneous solid solutions in which atoms of one metal sit at random in the lattice of the other. A substitutional alloy forms most easily when the metallic radii differ by less than about 15 % and the crystal structures and chemical properties are similar.
Transition metals have very similar radii (Section 11.1) and form alloys readily with one another: brass (Cu + Zn), bronze (Cu + Sn), stainless steel (Fe with Cr and Ni), nichrome (Ni + Cr, heating elements), and steels hardened with Cr, V, Mn, Mo or W. Alloys are usually harder, stronger and more corrosion-resistant than their components, and often have lower melting points.
Which property is not typical of interstitial compounds such as $\mathrm{TiC}$ and $\mathrm{Mn_{4}N}$?
Potassium dichromate
Chromium(VI) compounds are made from the ore chromite, $\mathrm{FeCr_{2}O_{4}}$ (that is, $\mathrm{FeO\cdot Cr_{2}O_{3}}$), in three steps.
1. Oxidative fusion. The powdered ore is fused with sodium carbonate (or NaOH) in a free supply of air. Chromium(III) is oxidised to chromate (+6) and iron(II) to iron(III):
$$\mathrm{4FeCr_{2}O_{4}(s)+8Na_{2}CO_{3}(s)+7O_{2}(g)\rightarrow 8Na_{2}CrO_{4}(s)+2Fe_{2}O_{3}(s)+8CO_{2}(g)}$$2. Acidification. The yellow sodium chromate is dissolved out with water (leaving $\mathrm{Fe_{2}O_{3}}$), filtered and acidified with sulphuric acid, giving orange sodium dichromate:
$$\mathrm{2Na_{2}CrO_{4}(aq)+2H^{+}(aq)\rightarrow Na_{2}Cr_{2}O_{7}(aq)+2Na^{+}(aq)+H_{2}O(l)}$$3. Metathesis with KCl. Sodium dichromate is very soluble (and deliquescent); adding potassium chloride gives the less soluble potassium salt, which crystallises as orange crystals:
$$\mathrm{Na_{2}Cr_{2}O_{7}(aq)+2KCl(aq)\rightarrow K_{2}Cr_{2}O_{7}(s)+2NaCl(aq)}$$The chromate–dichromate equilibrium. Chromate and dichromate interconvert with pH; chromium stays +6 throughout, so this is an acid–base (condensation) equilibrium, not a redox reaction:
$$\mathrm{2CrO_{4}^{2-}(aq)+2H^{+}(aq)\rightleftharpoons Cr_{2}O_{7}^{2-}(aq)+H_{2}O(l)}$$- Acid (low pH) shifts the equilibrium to the right: orange $\mathrm{Cr_{2}O_{7}^{2-}}$. Alkali removes $\mathrm{H^{+}}$ and shifts it to the left: yellow $\mathrm{CrO_{4}^{2-}}$, $$\mathrm{Cr_{2}O_{7}^{2-}(aq)+2OH^{-}(aq)\rightarrow 2CrO_{4}^{2-}(aq)+H_{2}O(l)}$$ (Le Chatelier's principle, Section 6.2.) The oxidation state of Cr is +6 in both.
- Chromate is tetrahedral: Cr at the centre of four O atoms. Dichromate is two such tetrahedra sharing one corner oxygen: six terminal Cr–O bonds (about 163 pm) and two bridging Cr–O bonds (about 179 pm), with a Cr–O–Cr angle of about 126°.
- So "add acid and the yellow solution turns orange" is diagnostic of chromate; and an acidified dichromate solution is the form used as an oxidant.
Oxidising action. In acid solution dichromate is a strong oxidising agent; each chromium gains three electrons:
$$\mathrm{Cr_{2}O_{7}^{2-}(aq)+14H^{+}(aq)+6e^{-}\rightarrow 2Cr^{3+}(aq)+7H_{2}O(l)}\qquad E^{\circ}=+1.33\ \mathrm{V}$$The colour changes from orange to green ($\mathrm{Cr^{3+}}$). One mole of dichromate accepts 6 mol of electrons, so its $n$-factor is 6 (Section 7.1). Combining this half-reaction with the oxidation half of the reductant gives the full equations:
Iodide to iodine: $$\mathrm{Cr_{2}O_{7}^{2-}(aq)+14H^{+}(aq)+6I^{-}(aq)\rightarrow 2Cr^{3+}(aq)+3I_{2}(s)+7H_{2}O(l)}$$
Iron(II) to iron(III): $$\mathrm{Cr_{2}O_{7}^{2-}(aq)+14H^{+}(aq)+6Fe^{2+}(aq)\rightarrow 2Cr^{3+}(aq)+6Fe^{3+}(aq)+7H_{2}O(l)}$$
Tin(II) to tin(IV): $$\mathrm{Cr_{2}O_{7}^{2-}(aq)+14H^{+}(aq)+3Sn^{2+}(aq)\rightarrow 2Cr^{3+}(aq)+3Sn^{4+}(aq)+7H_{2}O(l)}$$
Hydrogen sulphide to sulphur: $$\mathrm{Cr_{2}O_{7}^{2-}(aq)+8H^{+}(aq)+3H_{2}S(g)\rightarrow 2Cr^{3+}(aq)+3S(s)+7H_{2}O(l)}$$
Sulphite to sulphate: $$\mathrm{Cr_{2}O_{7}^{2-}(aq)+8H^{+}(aq)+3SO_{3}^{2-}(aq)\rightarrow 2Cr^{3+}(aq)+3SO_{4}^{2-}(aq)+4H_{2}O(l)}$$
Ethanol to ethanal (the breath-analyser reaction): $$\mathrm{Cr_{2}O_{7}^{2-}(aq)+8H^{+}(aq)+3C_{2}H_{5}OH(aq)\rightarrow 2Cr^{3+}(aq)+3CH_{3}CHO(aq)+7H_{2}O(l)}$$
In every case: 1 mol $\mathrm{Cr_{2}O_{7}^{2-}}$ takes 6 mol electrons; the coefficient of the reductant is $6/(\text{electrons lost per reductant particle})$.
Other properties and uses. On strong heating, potassium dichromate decomposes: $$\mathrm{4K_{2}Cr_{2}O_{7}(s)\rightarrow 4K_{2}CrO_{4}(s)+2Cr_{2}O_{3}(s)+3O_{2}(g)}$$ Because it is obtained very pure, is not hygroscopic and its solutions are stable, $\mathrm{K_{2}Cr_{2}O_{7}}$ is a primary standard in volumetric analysis (estimation of $\mathrm{Fe^{2+}}$, $\mathrm{I^{-}}$ via liberated iodine); the green $\mathrm{Cr^{3+}}$ masks the end point, so a redox indicator such as diphenylamine is added. It is also used in chrome tanning of leather, as a mordant in dyeing, and as an oxidant in organic chemistry (alcohols to aldehydes, ketones and acids). Chromium(VI) compounds are toxic and carcinogenic, which is why they are being replaced where possible.
An orange solution of $\mathrm{K_{2}Cr_{2}O_{7}}$ is made alkaline with NaOH. Which statement is correct?
Potassium permanganate
Manganese(VII) is reached from the ore pyrolusite, $\mathrm{MnO_{2}}$, in two stages: first to green manganate (+6), then to purple permanganate (+7).
1. Fusion to manganate. $\mathrm{MnO_{2}}$ is fused with KOH in air (or with an oxidant such as $\mathrm{KNO_{3}}$), giving dark green potassium manganate:
$$\mathrm{2MnO_{2}(s)+4KOH(l)+O_{2}(g)\rightarrow 2K_{2}MnO_{4}(s)+2H_{2}O(g)}$$2a. Disproportionation. Manganate is stable only in strong alkali. In neutral or acidic solution it disproportionates into permanganate and manganese dioxide:
$$\mathrm{3MnO_{4}^{2-}(aq)+4H^{+}(aq)\rightarrow 2MnO_{4}^{-}(aq)+MnO_{2}(s)+2H_{2}O(l)}$$2b. Electrolytic oxidation (the commercial route). An alkaline manganate solution is oxidised at the anode, so all the manganese ends as permanganate:
$$\mathrm{MnO_{4}^{2-}(aq)\rightarrow MnO_{4}^{-}(aq)+e^{-}}$$Laboratory route: manganese(II) is oxidised by peroxodisulphate:
$$\mathrm{2Mn^{2+}(aq)+5S_{2}O_{8}^{2-}(aq)+8H_{2}O(l)\rightarrow 2MnO_{4}^{-}(aq)+10SO_{4}^{2-}(aq)+16H^{+}(aq)}$$Properties. $\mathrm{KMnO_{4}}$ forms dark purple, almost black, crystals (isostructural with $\mathrm{KClO_{4}}$), moderately soluble in water to give an intensely purple solution. On heating to about 513 K it decomposes, giving oxygen: $\mathrm{2KMnO_{4}(s)\rightarrow K_{2}MnO_{4}(s)+MnO_{2}(s)+O_{2}(g)}$. Both the manganate and permanganate ions are tetrahedral, with π bonding between filled O 2p and empty Mn 3d orbitals. Manganate, Mn(VI), is $d^{1}$ — green and paramagnetic; permanganate, Mn(VII), is $d^{0}$ — purple (charge transfer) and diamagnetic (a weak temperature-independent paramagnetism is sometimes quoted, but it has no unpaired electron).
The product, and so the number of electrons gained, depends on the medium:
Acidic (dilute $\mathrm{H_{2}SO_{4}}$), Mn +7 → +2, colourless $\mathrm{Mn^{2+}}$, $n$-factor 5:
$$\mathrm{MnO_{4}^{-}(aq)+8H^{+}(aq)+5e^{-}\rightarrow Mn^{2+}(aq)+4H_{2}O(l)}\qquad E^{\circ}=+1.51\ \mathrm{V}$$Neutral or faintly alkaline, Mn +7 → +4, brown precipitate of $\mathrm{MnO_{2}}$, $n$-factor 3:
$$\mathrm{MnO_{4}^{-}(aq)+2H_{2}O(l)+3e^{-}\rightarrow MnO_{2}(s)+4OH^{-}(aq)}\qquad E^{\circ}=+0.59\ \mathrm{V}$$Strongly alkaline, Mn +7 → +6, green manganate, $n$-factor 1:
$$\mathrm{MnO_{4}^{-}(aq)+e^{-}\rightarrow MnO_{4}^{2-}(aq)}\qquad E^{\circ}=+0.56\ \mathrm{V}$$The large $E^{\circ}$ in acid shows how strongly $\mathrm{H^{+}}$ helps: it removes the oxide ions of $\mathrm{MnO_{4}^{-}}$ as water. Sulphuric acid is used to acidify, not HCl (permanganate oxidises chloride to chlorine, $\mathrm{2MnO_{4}^{-}+10Cl^{-}+16H^{+}\rightarrow 2Mn^{2+}+5Cl_{2}+8H_{2}O}$, so extra permanganate is consumed) and not $\mathrm{HNO_{3}}$ (itself an oxidising agent).
Reactions in acidic solution (each balanced with the 5-electron half-reaction):
$$\mathrm{2MnO_{4}^{-}(aq)+10I^{-}(aq)+16H^{+}(aq)\rightarrow 2Mn^{2+}(aq)+5I_{2}(s)+8H_{2}O(l)}$$ $$\mathrm{MnO_{4}^{-}(aq)+5Fe^{2+}(aq)+8H^{+}(aq)\rightarrow Mn^{2+}(aq)+5Fe^{3+}(aq)+4H_{2}O(l)}$$ $$\mathrm{2MnO_{4}^{-}(aq)+5C_{2}O_{4}^{2-}(aq)+16H^{+}(aq)\rightarrow 2Mn^{2+}(aq)+10CO_{2}(g)+8H_{2}O(l)}$$ $$\mathrm{2MnO_{4}^{-}(aq)+5H_{2}S(g)+6H^{+}(aq)\rightarrow 2Mn^{2+}(aq)+5S(s)+8H_{2}O(l)}$$ $$\mathrm{2MnO_{4}^{-}(aq)+5SO_{3}^{2-}(aq)+6H^{+}(aq)\rightarrow 2Mn^{2+}(aq)+5SO_{4}^{2-}(aq)+3H_{2}O(l)}$$ $$\mathrm{2MnO_{4}^{-}(aq)+5NO_{2}^{-}(aq)+6H^{+}(aq)\rightarrow 2Mn^{2+}(aq)+5NO_{3}^{-}(aq)+3H_{2}O(l)}$$ $$\mathrm{2MnO_{4}^{-}(aq)+5H_{2}O_{2}(aq)+6H^{+}(aq)\rightarrow 2Mn^{2+}(aq)+5O_{2}(g)+8H_{2}O(l)}$$The oxalate reaction is slow at first and is run warm (about 333 K); it speeds up once some $\mathrm{Mn^{2+}}$ has formed, because $\mathrm{Mn^{2+}}$ catalyses it (autocatalysis).
Reactions in neutral or faintly alkaline solution (3-electron half-reaction, $\mathrm{MnO_{2}}$ formed):
$$\mathrm{2MnO_{4}^{-}(aq)+I^{-}(aq)+H_{2}O(l)\rightarrow 2MnO_{2}(s)+IO_{3}^{-}(aq)+2OH^{-}(aq)}$$ $$\mathrm{8MnO_{4}^{-}(aq)+3S_{2}O_{3}^{2-}(aq)+H_{2}O(l)\rightarrow 8MnO_{2}(s)+6SO_{4}^{2-}(aq)+2OH^{-}(aq)}$$ $$\mathrm{2MnO_{4}^{-}(aq)+3Mn^{2+}(aq)+2H_{2}O(l)\rightarrow 5MnO_{2}(s)+4H^{+}(aq)}$$Note that iodide gives iodate here (I: −1 → +5), not iodine, and thiosulphate gives sulphate. The last reaction (a comproportionation of Mn(VII) and Mn(II) to Mn(IV)) is carried out in the presence of zinc sulphate or zinc oxide, which removes the acid formed.
- Fix the medium and the product: $\mathrm{MnO_{4}^{-}}$ → $\mathrm{Mn^{2+}}$ (acid, 5 e⁻), $\mathrm{MnO_{2}}$ (neutral/faintly alkaline, 3 e⁻), $\mathrm{MnO_{4}^{2-}}$ (strongly alkaline, 1 e⁻); $\mathrm{Cr_{2}O_{7}^{2-}}$ → $\mathrm{2Cr^{3+}}$ (6 e⁻).
- Electrons lost per reductant particle: $\mathrm{Fe^{2+}}$ 1; $\mathrm{C_{2}O_{4}^{2-}}$ 2; $\mathrm{I^{-}}\to\mathrm{I_{2}}$ 1, $\mathrm{I^{-}}\to\mathrm{IO_{3}^{-}}$ 6; $\mathrm{H_{2}O_{2}}$ 2; $\mathrm{FeC_{2}O_{4}}$ 3 (both parts are oxidised); $\mathrm{S_{2}O_{3}^{2-}}\to\mathrm{SO_{4}^{2-}}$ 8.
- Equate electrons: (mol oxidant)×(e⁻ gained) = (mol reductant)×(e⁻ lost), i.e. $M_{1}V_{1}n_{1}=M_{2}V_{2}n_{2}$.
- End point: $\mathrm{KMnO_{4}}$ is its own indicator — the first excess drop leaves a permanent pale pink. With dichromate add an indicator (diphenylamine).
The same $1.0\ \mathrm{mmol}$ of iodide is titrated with $0.0200\ \mathrm{M}$ $\mathrm{KMnO_{4}}$, once in acid and once in neutral solution. Which needs more permanganate, and how much more?
1. $n$-factor of $\mathrm{KMnO_{4}}$ depends on the medium. 5 in acid ($\mathrm{Mn^{2+}}$), 3 in neutral/faintly alkaline ($\mathrm{MnO_{2}}$), 1 in strongly alkaline ($\mathrm{MnO_{4}^{2-}}$). And the reductant's product can change too: $\mathrm{I^{-}}$ gives $\mathrm{I_{2}}$ in acid but $\mathrm{IO_{3}^{-}}$ in neutral solution.
2. Chromate ⇌ dichromate is not redox. Cr is +6 in both; only the pH changes. Green colour means $\mathrm{Cr^{3+}}$, i.e. reduction.
3. Acidify with $\mathrm{H_{2}SO_{4}}$ only. HCl is oxidised to $\mathrm{Cl_{2}}$ (titre too high); $\mathrm{HNO_{3}}$ is an oxidant itself.
4. Colour and magnetism of $d^{0}$ oxoanions. $\mathrm{KMnO_{4}}$ and $\mathrm{K_{2}Cr_{2}O_{7}}$ are diamagnetic yet intensely coloured (charge transfer); $\mathrm{K_{2}MnO_{4}}$ is paramagnetic ($d^{1}$). Do not use "coloured ⇒ unpaired electrons".
5. Spin-only arithmetic. $\mu=\sqrt{n(n+2)}$ uses the number of unpaired electrons of the ion ($\mathrm{Fe^{3+}}$: 5, not 3 or 6). $\sqrt{15}=3.87$, $\sqrt{24}=4.90$, $\sqrt{35}=5.92$; a measured 4.9 BM means 4 unpaired electrons.
In faintly alkaline solution, $\mathrm{KMnO_{4}}$ oxidises thiosulphate to sulphate. How many moles of $\mathrm{MnO_{4}^{-}}$ react with one mole of $\mathrm{S_{2}O_{3}^{2-}}$?
Exercises
Aqueous ions are high-spin. Molar masses ($\mathrm{g\,mol^{-1}}$): $\mathrm{KMnO_{4}}$ 158, $\mathrm{K_{2}Cr_{2}O_{7}}$ 294, $\mathrm{FeSO_{4}\cdot7H_{2}O}$ 278, $\mathrm{H_{2}C_{2}O_{4}\cdot2H_{2}O}$ 126, $\mathrm{O_{2}}$ 32.
- 1 Calculate the spin-only magnetic moments of $\mathrm{V^{3+}}$, $\mathrm{Co^{2+}}$ and $\mathrm{Ni^{2+}}$.
- 2 An aqueous first-row ion has $\mu=5.92\ \mathrm{BM}$. How many unpaired electrons does it have? Name two ions that fit.
- 3 How many of these aqueous ions are coloured: $\mathrm{Ti^{3+}}$, $\mathrm{Ti^{4+}}$, $\mathrm{Cr^{3+}}$, $\mathrm{Cu^{+}}$, $\mathrm{Zn^{2+}}$, $\mathrm{Fe^{3+}}$, $\mathrm{Sc^{3+}}$, $\mathrm{Ni^{2+}}$?
- 4 An aqueous ion absorbs light of wavelength $600\ \mathrm{nm}$ (orange). Find the energy absorbed per mole of photons in $\mathrm{kJ\,mol^{-1}}$, and predict the colour seen.
- 5 Explain why $\mathrm{ZnSO_{4}}$ and $\mathrm{CuCl}$ are white, but $\mathrm{CuSO_{4}\cdot5H_{2}O}$ is blue.
- 6 Arrange $\mathrm{Mn^{2+}}$, $\mathrm{Cr^{3+}}$, $\mathrm{Fe^{2+}}$ and $\mathrm{Cu^{2+}}$ in increasing order of spin-only magnetic moment.
- 7 Distinguish paramagnetism from ferromagnetism, and name three ferromagnetic metals.
- 8 Why is the pale pink colour of $\mathrm{Mn^{2+}(aq)}$ so much weaker than the blue of $\mathrm{Cu^{2+}(aq)}$?
- 1 Give two reasons why transition metals and their compounds are good catalysts, with one industrial example of each.
- 2 In the contact process, what are the oxidation states of vanadium in $\mathrm{V_{2}O_{5}}$ and in $\mathrm{V_{2}O_{4}}$? Write the two equations that show its catalytic cycle.
- 3 Why do $\mathrm{Na^{+}}$ and $\mathrm{K^{+}}$ form very few complexes while $\mathrm{Fe^{3+}}$ and $\mathrm{Cu^{2+}}$ form many?
- 4 Write the equation for the formation of the deep-blue complex when ammonia is added to aqueous copper(II) sulphate. What is the oxidation state of copper in the complex?
- 5 How many hydrogen atoms are present per 10 titanium atoms in $\mathrm{TiH_{1.7}}$? Why can such a formula exist?
- 6 List four characteristic properties of interstitial compounds.
- 7 Calculate the percentage difference in metallic radius between Cu (128 pm) and Zn (137 pm) relative to Cu. Is brass likely to be a solid solution?
- 8 Name the components of brass, bronze and stainless steel, and give one property that stainless steel gains over iron.
- 1 Write the equations for the three steps in the preparation of $\mathrm{K_{2}Cr_{2}O_{7}}$ from chromite. What is the oxidation state of Cr in chromite?
- 2 In the fusion step, how many moles of $\mathrm{O_{2}}$ are consumed per mole of $\mathrm{FeCr_{2}O_{4}}$?
- 3 Explain, with an equation, what happens to the colour of a dichromate solution when NaOH is added, and when acid is then added again.
- 4 Describe the structure of the dichromate ion. How many Cr–O bonds does it contain in total?
- 5 Write the balanced ionic equation for the oxidation of iron(II) by acidified dichromate. What is the coefficient of $\mathrm{H^{+}}$?
- 6 Balance the reaction of acidified dichromate with $\mathrm{H_{2}S}$. How many moles of sulphur form per mole of dichromate?
- 7 $25.0\ \mathrm{mL}$ of $0.120\ \mathrm{M}$ $\mathrm{Fe^{2+}}$ is titrated with $0.0200\ \mathrm{M}$ $\mathrm{K_{2}Cr_{2}O_{7}}$. Find the end-point volume.
- 8 Why is $\mathrm{K_{2}Cr_{2}O_{7}}$, rather than $\mathrm{Na_{2}Cr_{2}O_{7}}$, used as a primary standard?
- 9 Write the equation for the decomposition of $\mathrm{K_{2}Cr_{2}O_{7}}$ on strong heating, and give two uses of potassium dichromate.
- 1 Write the equations for converting $\mathrm{MnO_{2}}$ into $\mathrm{KMnO_{4}}$ via potassium manganate, using (i) disproportionation in acid and (ii) electrolytic oxidation.
- 2 In the disproportionation of manganate in acid, what fraction of the manganese ends up as permanganate?
- 3 Give the oxidation state and number of unpaired electrons of Mn in $\mathrm{K_{2}MnO_{4}}$ and in $\mathrm{KMnO_{4}}$. Which is paramagnetic?
- 4 What is the $n$-factor of $\mathrm{KMnO_{4}}$ in (i) acid, (ii) neutral, (iii) strongly alkaline solution? Write the half-reaction for each.
- 5 Balance the reaction of acidified permanganate with nitrite and with sulphite.
- 6 What volume of $0.0200\ \mathrm{M}$ $\mathrm{KMnO_{4}}$ is needed in acid to oxidise $25.0\ \mathrm{mL}$ of $0.100\ \mathrm{M}$ $\mathrm{FeSO_{4}}$?
- 7 What mass of $\mathrm{O_{2}}$ is evolved when $3.16\ \mathrm{g}$ of $\mathrm{KMnO_{4}}$ is heated to 513 K?
- 8 Why is HCl not used to acidify permanganate in titrations? Write the equation for the side reaction.
- 9 In the acidic titration of oxalate with permanganate, the colour of the first few drops disappears slowly, later ones almost instantly. Explain.
E1. JEE Main · MCQ An aqueous ion has a spin-only magnetic moment of $3.87\ \mathrm{BM}$. The ion is (A) $\mathrm{Fe^{3+}}$ (B) $\mathrm{Ni^{2+}}$ (C) $\mathrm{Cr^{3+}}$ (D) $\mathrm{Cu^{2+}}$
E2. JEE Main · Numerical A hydrated $\mathrm{M^{2+}}$ ion of a first-row transition metal has a spin-only magnetic moment of $5.92\ \mathrm{BM}$. Find the atomic number of M. Give the answer to the nearest integer.
E3. JEE Main · Numerical What volume, in mL, of $0.0200\ \mathrm{M}$ $\mathrm{KMnO_{4}}$ is required to oxidise completely $10.0\ \mathrm{mL}$ of $0.0500\ \mathrm{M}$ iron(II) oxalate, $\mathrm{FeC_{2}O_{4}}$, in acidic medium? Give the answer to the nearest integer.
E4. JEE Main · MCQ In neutral or faintly alkaline solution, potassium permanganate oxidises iodide to (A) $\mathrm{I_{2}}$ (B) $\mathrm{IO_{3}^{-}}$ (C) $\mathrm{IO_{4}^{-}}$ (D) $\mathrm{I_{3}^{-}}$
E5. JEE Main · MCQ When the pH of an orange aqueous solution of potassium dichromate is raised by adding KOH, (A) the solution turns yellow and the oxidation state of chromium is unchanged (B) the solution turns green as Cr(VI) is reduced to Cr(III) (C) the solution turns yellow as Cr(VI) is reduced to Cr(III) (D) the colour does not change because the equilibrium does not involve $\mathrm{OH^{-}}$
E6. JEE Main · Numerical Hydrogen sulphide is passed into acidified potassium dichromate solution, giving $\mathrm{Cr^{3+}}$ and sulphur. In the balanced ionic equation with the smallest whole-number coefficients (species: $\mathrm{Cr_{2}O_{7}^{2-}}$, $\mathrm{H^{+}}$, $\mathrm{H_{2}S}$, $\mathrm{Cr^{3+}}$, $\mathrm{S}$, $\mathrm{H_{2}O}$), what is the sum of all the coefficients? Give the answer to the nearest integer.
Research question. Does an iron supplement tablet really contain the amount of iron printed on its label?
Why it matters. Iron-deficiency anaemia affects hundreds of millions of people worldwide, especially children and pregnant women, and public-health programmes in many countries distribute iron tablets. Regulators and pharmaceutical quality-control laboratories check the iron content of every batch — often with exactly the permanganate titration of this section.
What to do.
- Standardise a roughly $0.01\ \mathrm{M}$ $\mathrm{KMnO_{4}}$ solution against a weighed amount of oxalic acid dihydrate in warm dilute $\mathrm{H_{2}SO_{4}}$ (Example 6a).
- Weigh one tablet labelled "ferrous sulphate" (or ferrous fumarate), crush it and dissolve it in about $50\ \mathrm{mL}$ of $1\ \mathrm{M}$ $\mathrm{H_{2}SO_{4}}$; filter off any insoluble binder and make up to $100\ \mathrm{mL}$.
- Titrate $20.0\ \mathrm{mL}$ portions with the permanganate to the first permanent pale pink. Repeat until two titres agree within $0.1\ \mathrm{mL}$.
- Calculate the mass of iron per tablet ($\mathrm{MnO_{4}^{-}}:\mathrm{Fe^{2+}}=1:5$) and compare with the label.
Tools: Burette, pipette, volumetric flasks, analytical balance, the titration lab of this section (to check your stoichiometry), spreadsheet for the uncertainty calculation.
Hand in: Your titres, the iron content with an uncertainty estimate, the percentage of the label value, and two sentences on whether a fumarate tablet (whose anion is also an organic acid) could react with permanganate and bias the result.
Going further. Repeat the analysis on a tablet that has been left open to air for several weeks. Some iron(II) will have become iron(III), which permanganate does not titrate. How could you reduce all the iron back to iron(II) first, and how would that change your answer?
🧪 Self-check quiz
Q1. Which set contains only colourless ions in aqueous solution?
Q2. The spin-only magnetic moments of $\mathrm{Mn^{2+}}$, $\mathrm{Fe^{2+}}$ and $\mathrm{Ni^{2+}}$ (aqueous) are, in order,
Q3. The number of moles of $\mathrm{KMnO_{4}}$ that react with one mole of $\mathrm{Fe^{2+}}$ in acidic solution is
Q4. The catalytic activity of $\mathrm{V_{2}O_{5}}$ in the contact process is mainly due to
Q5. Potassium manganate disproportionates in acidic solution. The products are