7.1 Oxidation Numbers and Balancing Redox Reactions
Every redox reaction is a transfer of electrons: one species gives them up and is oxidised, another takes them and is reduced. Oxidation numbers keep the books, the ion-electron method balances any equation in acid or base, and the n-factor turns every redox titration into one line: equivalents of oxidant = equivalents of reductant.
An iron gate rusts in the monsoon. A slice of apple turns brown on the plate. A traffic policeman's breathalyser once relied on orange dichromate turning green when it met the ethanol in a driver's breath. Bleach removes a stain, a lithium cell powers a phone, and inside every one of your cells glucose is "burnt" step by step to carbon dioxide while oxygen becomes water. Different as they look, all of these are redox reactions: in each of them electrons leave one substance and arrive at another.
Chemists need three things to handle such reactions. First, a way to see who loses electrons and who gains them, even in covalent molecules where nothing is visibly charged — that is the job of the oxidation number. Second, a reliable recipe to balance redox equations, which are often too tangled to balance by inspection (try $\mathrm{MnO_{4}^{-}+C_{2}O_{4}^{2-}+H^{+}}$ by trial and error). Third, a quick way to do the arithmetic of redox titrations, the analytical method used to measure iron in tablets, vitamin C in juice or the strength of hydrogen peroxide. This section builds all three, and it is the foundation for the electrochemistry of Section 7.2 and the cells of Section 7.3. We use the mole concept and molarity of Section 1.2 and Section 1.3, and electronegativity from Section 3.2.
Conventions used in this section: molar masses in $\mathrm{g\,mol^{-1}}$ ($\mathrm{H}=1.0$, $\mathrm{C}=12.01$, $\mathrm{O}=16.00$, $\mathrm{K}=39.10$, $\mathrm{Cr}=52.00$, $\mathrm{Mn}=54.94$, $\mathrm{Fe}=55.85$, $\mathrm{Cu}=63.5$); molarity $M$ in $\mathrm{mol\,L^{-1}}$; "acidic medium" for permanganate and dichromate means dilute sulphuric acid unless stated. Oxidation numbers are written with a sign ($+7$, $-2$) and, in names, as Roman numerals: manganese(VII).
Oxidation and reduction as electron transfer
The words are older than the electron. To the eighteenth-century chemist, oxidation meant combining with oxygen ($\mathrm{2Mg(s)+O_{2}(g)\rightarrow 2MgO(s)}$) and reduction meant removing it — iron ore is "reduced" to iron in a blast furnace. The idea was soon widened: removal of hydrogen ($\mathrm{H_{2}S}\rightarrow\mathrm{S}$) also counted as oxidation, addition of hydrogen as reduction, and so did the addition of any electronegative element (chlorine, sulphur) or the removal of an electropositive one. These classical definitions work but look like a list of unrelated rules. One idea unites them.
Look at magnesium burning in oxygen: the product $\mathrm{MgO}$ is ionic, $\mathrm{Mg^{2+}O^{2-}}$. Each magnesium atom has lost two electrons and each oxygen atom has gained two. Magnesium burning in chlorine gives $\mathrm{Mg^{2+}(Cl^{-})_{2}}$ — no oxygen at all, yet exactly the same thing has happened to magnesium. So we split the reaction into two half-reactions:
$$\mathrm{Mg(s)\rightarrow Mg^{2+}+2e^{-}}\qquad\text{(oxidation)}$$ $$\mathrm{Cl_{2}(g)+2e^{-}\rightarrow 2Cl^{-}}\qquad\text{(reduction)}$$Oxidation is the loss of electrons by a species; reduction is the gain of electrons by a species. A reaction in which electrons are transferred is a redox reaction. Each redox reaction can be written as the sum of an oxidation half-reaction (electrons on the right) and a reduction half-reaction (electrons on the left), in which the numbers of electrons lost and gained are equal.
Oxidation and reduction always occur together: free electrons cannot pile up in a beaker, so every electron lost by one species must be gained by another. (Memory aid: OIL RIG — Oxidation Is Loss, Reduction Is Gain.)
An oxidising agent (oxidant) is a species that accepts electrons; in doing so it oxidises another species and is itself reduced. A reducing agent (reductant) donates electrons; it reduces another species and is itself oxidised.
The oxidised and reduced forms of the same element taking part in a half-reaction form a redox couple, written oxidised form/reduced form: $\mathrm{Cu^{2+}/Cu}$, $\mathrm{Zn^{2+}/Zn}$, $\mathrm{MnO_{4}^{-}/Mn^{2+}}$, $\mathrm{Cl_{2}/Cl^{-}}$.
So in the burning of magnesium in chlorine, magnesium is the reducing agent (it is oxidised) and chlorine is the oxidising agent (it is reduced). The agent is named after what it does to the other substance — a common source of confusion.
A competition for electrons. Dip a strip of zinc into blue copper(II) sulphate solution. Within minutes the zinc is coated with reddish copper and the blue colour fades:
$$\mathrm{Zn(s)+Cu^{2+}(aq)\rightarrow Zn^{2+}(aq)+Cu(s)}$$Zinc has given its electrons to copper(II) ions. Dip a copper strip into zinc sulphate solution and nothing happens: copper does not reduce $\mathrm{Zn^{2+}}$. But a copper wire in silver nitrate solution grows silver crystals and the solution turns blue, $\mathrm{Cu(s)+2Ag^{+}(aq)\rightarrow Cu^{2+}(aq)+2Ag(s)}$. These experiments rank the metals by their readiness to release electrons, $\mathrm{Zn}\gt\mathrm{Cu}\gt\mathrm{Ag}$, and their ions in the opposite order of readiness to accept them, $\mathrm{Ag^{+}}\gt\mathrm{Cu^{2+}}\gt\mathrm{Zn^{2+}}$. In Section 7.3 this ranking becomes quantitative as the series of standard electrode potentials; here we only need the idea that a redox reaction is a competition for electrons, and the stronger reductant gives them to the stronger oxidant.
If the zinc and the copper(II) solution are kept in separate vessels and joined by a wire (and a salt bridge), the same electron transfer happens through the wire — an electric current. That is a galvanic cell, and it is why redox chemistry and electrochemistry share one unit of the syllabus.
For the reaction $$\mathrm{2Fe^{3+}(aq)+Sn^{2+}(aq)\rightarrow 2Fe^{2+}(aq)+Sn^{4+}(aq)}$$ which statement is correct?
Oxidation number
For ionic reactions such as $\mathrm{Zn+Cu^{2+}}$ the electron transfer is plain to see. But in $\mathrm{H_{2}(g)+Cl_{2}(g)\rightarrow 2HCl(g)}$ the product is a covalent molecule: no electron has left hydrogen completely. Still, the shared pair in $\mathrm{H{-}Cl}$ is pulled towards the more electronegative chlorine, so hydrogen has partly lost and chlorine partly gained electron density. To treat such reactions in the same way as ionic ones we use a bookkeeping device: we pretend every bond is ionic.
The oxidation number of an atom in a substance is the charge that atom would carry if every bond it forms were fully ionic — that is, if each shared electron pair were assigned completely to the more electronegative of the two bonded atoms, and a pair shared between two atoms of the same element were split equally between them.
It is a formal number (it can be zero, negative, positive, or — as an average — fractional), not a real charge. The terms oxidation number and oxidation state are used interchangeably.
Applying this definition to every structure would be slow, so in practice we use a set of rules that follow from it.
- Elements in the free (uncombined) state have oxidation number $0$, whatever their molecular form: $\mathrm{Na}$, $\mathrm{H_{2}}$, $\mathrm{O_{3}}$, $\mathrm{P_{4}}$, $\mathrm{S_{8}}$.
- A monatomic ion has oxidation number equal to its charge: $\mathrm{Fe^{3+}}$ is $+3$, $\mathrm{S^{2-}}$ is $-2$.
- Fluorine, the most electronegative element, is always $-1$ in its compounds.
- Oxygen is $-2$ in most compounds, except in peroxides ($\mathrm{H_{2}O_{2}}$, $\mathrm{Na_{2}O_{2}}$, $\mathrm{BaO_{2}}$: $-1$), superoxides ($\mathrm{KO_{2}}$: $-\tfrac12$) and compounds with fluorine ($\mathrm{OF_{2}}$: $+2$; $\mathrm{O_{2}F_{2}}$: $+1$).
- Hydrogen is $+1$ when bonded to non-metals ($\mathrm{H_{2}O}$, $\mathrm{NH_{3}}$, $\mathrm{HCl}$) and $-1$ in binary metal hydrides ($\mathrm{NaH}$, $\mathrm{CaH_{2}}$, $\mathrm{LiAlH_{4}}$).
- In their compounds, alkali metals are always $+1$, alkaline-earth metals $+2$, and aluminium $+3$.
- Other halogens (Cl, Br, I) are $-1$ in binary compounds with metals and hydrogen, but take positive values when bonded to oxygen or to a more electronegative halogen ($\mathrm{ClO_{4}^{-}}$: $+7$; $\mathrm{ICl}$: I is $+1$).
- The sum of the oxidation numbers of all atoms equals $0$ for a neutral species and equals the charge for an ion.
When two rules conflict, the one higher in the list wins ($\mathrm{OF_{2}}$: rule 3 beats rule 4). Rule 8 then gives the one unknown.
With oxidation numbers, the electronic definitions can be restated so that they apply to covalent reactions as well:
- Oxidation is an increase in the oxidation number of an element; reduction is a decrease. A reaction is a redox reaction if and only if at least one element changes its oxidation number.
- The total increase in oxidation number (summed over all atoms that are oxidised) equals the total decrease (over all atoms that are reduced) — this is the electron balance.
- Every element has a highest and a lowest possible oxidation number (for s- and p-block elements the highest is usually the group's number of valence electrons, the lowest is that number minus eight). A species in which an element is at its highest oxidation number can act (through that element) only as an oxidising agent — $\mathrm{KMnO_{4}}$ (Mn $+7$), $\mathrm{K_{2}Cr_{2}O_{7}}$ (Cr $+6$), $\mathrm{HNO_{3}}$ (N $+5$). One at the lowest can act only as a reducing agent — $\mathrm{H_{2}S}$ (S $-2$), $\mathrm{NH_{3}}$ (N $-3$), $\mathrm{I^{-}}$. An intermediate value allows both — $\mathrm{H_{2}O_{2}}$, $\mathrm{SO_{2}}$, $\mathrm{HNO_{2}}$, $\mathrm{NO_{2}^{-}}$.
So $\mathrm{H_{2}+Cl_{2}\rightarrow 2HCl}$ is a redox reaction: H goes from $0$ to $+1$ (oxidised) and Cl from $0$ to $-1$ (reduced), and $2\times(+1)$ gained balances $2\times(-1)$.
- Fix the sure values first: F $=-1$; alkali metals $+1$; alkaline earths $+2$; H $+1$ (unless a metal hydride); O $-2$ (unless the species is a peroxide, superoxide or fluoride).
- Split off known ions: in $\mathrm{K_{4}[Fe(CN)_{6}]}$ treat $\mathrm{CN^{-}}$ as $-1$; in $\mathrm{NH_{4}NO_{3}}$ treat the cation and the anion separately.
- Apply the sum rule to get the unknown: $\sum(\text{oxidation numbers})=\text{charge}$.
- Sanity check: if the result exceeds the element's maximum (Cr above $+6$, S above $+6$, Mn above $+7$), the formula hides a peroxide (O–O) or S–S link — draw the structure and assign atom by atom.
Average and structure-based oxidation numbers. The sum rule gives one number for each element, assuming all its atoms are alike. When they are not, that number is an average, and it may be fractional. In $\mathrm{Fe_{3}O_{4}}$ the rule gives $3x=8$, $x=+\tfrac83$: the solid actually contains one $\mathrm{Fe^{2+}}$ and two $\mathrm{Fe^{3+}}$ per formula unit ($\mathrm{FeO\cdot Fe_{2}O_{3}}$), and $\tfrac{2+3+3}{3}=\tfrac83$. A fractional value is therefore a signal that atoms of the same element sit in different environments. To find the individual values we draw the structure and apply Definition 7.3 bond by bond.
Tetrathionate, $\mathrm{S_{4}O_{6}^{2-}}$, the product of the iodine–thiosulphate reaction of iodometry, gives $4x+6(-2)=-2$, $x=+\tfrac52$. In the structure ${}^{-}\mathrm{O_{3}S{-}S{-}S{-}SO_{3}^{-}}$ the two end sulphurs are each bonded to three oxygen atoms and lose all their share of those bonds: $+5$ each. The two middle sulphurs are bonded only to sulphur, so the pairs are split equally: $0$ each. Check: $\tfrac{5+0+0+5}{4}=2.5$ ✓.
Peroxide links. In $\mathrm{CrO_{5}}$ (the deep-blue "chromium peroxide" formed from dichromate and hydrogen peroxide) the naive rule gives Cr $=+10$, but chromium has only six valence electrons ($\mathrm{3d^{5}4s^{1}}$), so $+6$ is its ceiling. The structure has one ordinary oxide oxygen ($-2$) and two peroxide groups $\mathrm{O{-}O}$ (four oxygens at $-1$): $x-2-4=0$, $x=+6$. The same trap appears in peroxomonosulphuric acid (Caro's acid) $\mathrm{H_{2}SO_{5}}$, $\mathrm{HO{-}SO_{2}{-}O{-}OH}$, and peroxodisulphuric acid $\mathrm{H_{2}S_{2}O_{8}}$: in both, S is $+6$ (the naive rule gives $+8$ and $+7$).
Organic molecules are treated the same way. In ethanoic acid $\mathrm{CH_{3}COOH}$ the average is $0$, but the methyl carbon (three C–H bonds, one C–C) is $-3$ and the carboxyl carbon ($\mathrm{C{=}O}$ and C–OH, one C–C) is $+3$.
In the oxidation-number explorer choose $\mathrm{CrO_{5}}$. First keep the view on "formula rule", then switch to "from structure". What do you expect to see for chromium?
The average oxidation number of sulphur in $\mathrm{Na_{2}S_{4}O_{6}}$ is
Types of redox reactions
Once you can assign oxidation numbers, you can recognise a redox reaction at a glance — some element must change its oxidation number — and sort redox reactions into four families.
1. Combination reactions, $\mathrm{A+B\rightarrow AB}$, are redox when at least one of A, B is an element: $\mathrm{C(s)+O_{2}(g)\rightarrow CO_{2}(g)}$ (C: $0\to+4$; O: $0\to-2$), $\mathrm{3Mg(s)+N_{2}(g)\xrightarrow{\Delta}Mg_{3}N_{2}(s)}$ (Mg: $0\to+2$; N: $0\to-3$). But $\mathrm{CaO(s)+CO_{2}(g)\rightarrow CaCO_{3}(s)}$ is not redox: every element keeps its oxidation number.
2. Decomposition reactions, $\mathrm{AB\rightarrow A+B}$, are redox when an element is released: $\mathrm{2H_{2}O(l)\xrightarrow{\text{electrolysis}}2H_{2}(g)+O_{2}(g)}$, $\mathrm{2KClO_{3}(s)\xrightarrow[\mathrm{MnO_{2}}]{\Delta}2KCl(s)+3O_{2}(g)}$ (Cl: $+5\to-1$; O: $-2\to0$ — both elements in one compound change, an intramolecular redox). The decomposition $\mathrm{CaCO_{3}(s)\xrightarrow{\Delta}CaO(s)+CO_{2}(g)}$ is not redox.
3. Displacement reactions, $\mathrm{X+YZ\rightarrow XZ+Y}$, where one element pushes another out of a compound. Metal displacement: $\mathrm{Zn(s)+CuSO_{4}(aq)\rightarrow ZnSO_{4}(aq)+Cu(s)}$; the thermite-type reaction $\mathrm{Cr_{2}O_{3}(s)+2Al(s)\xrightarrow{\Delta}Al_{2}O_{3}(s)+2Cr(l)}$, used to obtain chromium and to weld rails. Non-metal displacement: hydrogen from water or acids, $\mathrm{2Na(s)+2H_{2}O(l)\rightarrow 2NaOH(aq)+H_{2}(g)}$, $\mathrm{Zn(s)+2HCl(aq)\rightarrow ZnCl_{2}(aq)+H_{2}(g)}$; and halogen displacement, $\mathrm{Cl_{2}(g)+2KBr(aq)\rightarrow 2KCl(aq)+Br_{2}(aq)}$. Halogens displace those below them in the group because oxidising power falls in the order $\mathrm{F_{2}\gt Cl_{2}\gt Br_{2}\gt I_{2}}$; fluorine is so strong that it even oxidises water to oxygen.
In a disproportionation reaction one element, in one oxidation state in one species, is simultaneously oxidised and reduced: part of it goes up in oxidation number and part goes down. The element must therefore start in an intermediate oxidation state and must be able to exist in at least one higher and one lower state.
The reverse — two species containing the same element in different oxidation states reacting to give it in one intermediate state — is called comproportionation.
Typical disproportionations (oxidation numbers of the element that changes in brackets):
$$\mathrm{2H_{2}O_{2}(aq)\rightarrow 2H_{2}O(l)+O_{2}(g)}\quad(\text{O}: -1\to-2,\ 0)$$ $$\mathrm{Cl_{2}(g)+2OH^{-}(aq)\rightarrow Cl^{-}(aq)+ClO^{-}(aq)+H_{2}O(l)}\quad(\text{Cl}: 0\to-1,\ +1)$$ $$\mathrm{3ClO^{-}(aq)\rightarrow 2Cl^{-}(aq)+ClO_{3}^{-}(aq)}\quad(\text{Cl}: +1\to-1,\ +5)$$ $$\mathrm{P_{4}(s)+3OH^{-}(aq)+3H_{2}O(l)\rightarrow PH_{3}(g)+3H_{2}PO_{2}^{-}(aq)}\quad(\text{P}: 0\to-3,\ +1)$$ $$\mathrm{2Cu^{+}(aq)\rightarrow Cu^{2+}(aq)+Cu(s)}\quad(\text{Cu}: +1\to+2,\ 0)$$The chlorine–hydroxide reaction in cold, dilute alkali gives hypochlorite (household bleach); in hot, concentrated alkali the hypochlorite disproportionates further and the overall result is $\mathrm{3Cl_{2}+6OH^{-}\rightarrow 5Cl^{-}+ClO_{3}^{-}+3H_{2}O}$. Fluorine cannot disproportionate: it has no positive oxidation states, so it can only be reduced. Likewise $\mathrm{ClO_{4}^{-}}$ (Cl $+7$, its maximum) cannot disproportionate. Comproportionation examples: $\mathrm{2H_{2}S(g)+SO_{2}(g)\rightarrow 3S(s)+2H_{2}O(l)}$ (S: $-2$ and $+4\to0$, the basis of sulphur recovery from natural gas) and $\mathrm{IO_{3}^{-}+5I^{-}+6H^{+}\rightarrow 3I_{2}+3H_{2}O}$.
(a) $\mathrm{2KClO_{3}(s)\rightarrow 2KCl(s)+3O_{2}(g)}$ (b) $\mathrm{Cr_{2}O_{3}(s)+2Al(s)\rightarrow Al_{2}O_{3}(s)+2Cr(l)}$ (c) $\mathrm{Cl_{2}(g)+2NaOH(aq)\rightarrow NaCl(aq)+NaClO(aq)+H_{2}O(l)}$ (d) $\mathrm{CaCO_{3}(s)\rightarrow CaO(s)+CO_{2}(g)}$ (e) $\mathrm{2H_{2}S(g)+SO_{2}(g)\rightarrow 3S(s)+2H_{2}O(l)}$ (f) $\mathrm{Cr_{2}O_{7}^{2-}(aq)+2OH^{-}(aq)\rightarrow 2CrO_{4}^{2-}(aq)+H_{2}O(l)}$
Which of the following can not undergo disproportionation?
Balancing redox equations; n-factor and redox titrations
A balanced redox equation must satisfy three conditions at once: every element balances, the total charge balances, and the electrons lost equal the electrons gained. The third condition is what makes trial and error hopeless and gives us two systematic methods.
- Write the skeleton equation and assign oxidation numbers; mark the elements that change.
- Balance the atoms of those elements, then find the increase and decrease in oxidation number per formula unit (multiply the change per atom by the number of such atoms).
- Multiply the oxidant and reductant by factors that make total increase = total decrease.
- Balance the remaining atoms other than O and H (ions that do not change, such as spectator $\mathrm{NO_{3}^{-}}$), then O with $\mathrm{H_{2}O}$, then H (with $\mathrm{H^{+}}$ in acid, or $\mathrm{H_{2}O}/\mathrm{OH^{-}}$ in base for ionic equations).
- Check atoms and charge.
The second method, preferred for reactions in solution, follows Definition 7.1 literally: it balances each half-reaction separately, with electrons written in, and only then adds them.
- Split the skeleton ionic equation into an oxidation half and a reduction half.
- In each half, balance the atoms other than O and H.
- Balance O by adding $\mathrm{H_{2}O}$ to the side short of oxygen.
- Balance H by adding $\mathrm{H^{+}}$ to the side short of hydrogen.
- Balance charge by adding electrons $\mathrm{e^{-}}$ to the more positive side. (Check: the number of electrons equals the change in oxidation number × number of atoms changing.)
- Equalise the electrons: multiply each half by the factor that makes electrons lost = electrons gained; add the halves and cancel species that appear on both sides ($\mathrm{e^{-}}$, $\mathrm{H^{+}}$, $\mathrm{H_{2}O}$).
- Basic medium: add as many $\mathrm{OH^{-}}$ to both sides as there are $\mathrm{H^{+}}$; combine $\mathrm{H^{+}+OH^{-}}$ into $\mathrm{H_{2}O}$ and cancel water. The final equation must contain no $\mathrm{H^{+}}$.
- Check atoms and charge.
The n-factor. Example 5(c) shows that the number of electrons each formula unit handles is the key to redox stoichiometry. Chemists package it in one number.
For a substance taking part in a redox reaction, the n-factor (valence factor) is the number of moles of electrons lost or gained per mole of the substance — the change in oxidation number per atom times the number of such atoms in one formula unit, totalled over all elements that change.
The number of equivalents (gram equivalents) is $n\text{-factor}\times\text{moles}$; the equivalent mass is $\dfrac{\text{molar mass}}{n\text{-factor}}$; and the normality of a solution is $N=n\text{-factor}\times M$ (equivalents per litre).
The n-factor belongs to a substance in a given reaction, not to the substance alone.
| Substance (reaction) | change | n-factor |
|---|---|---|
| $\mathrm{KMnO_{4}}$, acidic ($\to\mathrm{Mn^{2+}}$) | $+7\to+2$ | 5 |
| $\mathrm{KMnO_{4}}$, neutral or weakly basic ($\to\mathrm{MnO_{2}}$) | $+7\to+4$ | 3 |
| $\mathrm{KMnO_{4}}$, strongly basic ($\to\mathrm{MnO_{4}^{2-}}$) | $+7\to+6$ | 1 |
| $\mathrm{K_{2}Cr_{2}O_{7}}$, acidic ($\to\mathrm{2Cr^{3+}}$) | $2\times(+6\to+3)$ | 6 |
| $\mathrm{Fe^{2+}}$ salts ($\to\mathrm{Fe^{3+}}$) | $+2\to+3$ | 1 |
| $\mathrm{H_{2}C_{2}O_{4}}$ or $\mathrm{C_{2}O_{4}^{2-}}$ ($\to\mathrm{2CO_{2}}$) | $2\times(+3\to+4)$ | 2 |
| $\mathrm{FeC_{2}O_{4}}$ ($\to\mathrm{Fe^{3+}+2CO_{2}}$) | $1+2$ | 3 |
| $\mathrm{H_{2}O_{2}}$ as reductant ($\to\mathrm{O_{2}}$) or oxidant ($\to\mathrm{H_{2}O}$) | $2\times1$ | 2 |
| $\mathrm{Na_{2}S_{2}O_{3}}$ ($\to\tfrac12\mathrm{S_{4}O_{6}^{2-}}$) | $2\times(+2\to+2.5)$ | 1 |
In a complete reaction the number of equivalents of every reactant is the same — because electrons lost by the reductant equal electrons gained by the oxidant. For a titration of a solution of molarity $M_{1}$, volume $V_{1}$ and n-factor $n_{1}$ against one with $M_{2}$, $V_{2}$, $n_{2}$:
$$n_{1}M_{1}V_{1}=n_{2}M_{2}V_{2},\qquad\text{i.e. } N_{1}V_{1}=N_{2}V_{2}.$$For a sequence of reactions in which an intermediate is formed and consumed completely (as in iodometry), the equivalents carried through each step are equal, so the first reactant can be matched directly to the last. For a disproportionation in which an element's oxidation number changes by $a$ for the atoms reduced and $b$ for those oxidised, the n-factor per atom of the element is $\dfrac{ab}{a+b}$.
The disproportionation formula follows from the electron balance: if a fraction $f$ of the atoms is reduced, $fa=(1-f)b$, so $f=\tfrac{b}{a+b}$, and the electrons per atom are $fa=\tfrac{ab}{a+b}$. For chlorine in hot alkali ($a=1$ for $\mathrm{Cl^{-}}$, $b=5$ for $\mathrm{ClO_{3}^{-}}$) this is $\tfrac56$ per Cl atom, $\tfrac53$ per $\mathrm{Cl_{2}}$.
Redox titrations in practice. In permanganometry a standard $\mathrm{KMnO_{4}}$ solution in dilute $\mathrm{H_{2}SO_{4}}$ is run into the reductant ($\mathrm{Fe^{2+}}$, oxalate, $\mathrm{H_{2}O_{2}}$). Permanganate is its own indicator: the purple colour vanishes as long as reductant remains, and the first permanent pale pink marks the end point. Hydrochloric acid is not used to acidify, because permanganate would also oxidise chloride to chlorine and too much titrant would be used:
$$\mathrm{2MnO_{4}^{-}+10Cl^{-}+16H^{+}\rightarrow 2Mn^{2+}+5Cl_{2}+8H_{2}O}$$Oxalate titrations are done warm (about $60\ ^{\circ}\mathrm{C}$) because the reaction is slow at first. In dichromatometry $\mathrm{K_{2}Cr_{2}O_{7}}$, a primary standard, needs an external redox indicator such as diphenylamine. In iodometry an oxidant (e.g. $\mathrm{Cu^{2+}}$) liberates iodine from excess $\mathrm{KI}$, and the iodine is titrated with sodium thiosulphate using starch (blue-black until the end):
$$\mathrm{2Cu^{2+}(aq)+4I^{-}(aq)\rightarrow 2CuI(s)+I_{2}(aq)},$$ $$\mathrm{I_{2}(aq)+2S_{2}O_{3}^{2-}(aq)\rightarrow 2I^{-}(aq)+S_{4}O_{6}^{2-}(aq)}.$$Overall, $\mathrm{2Cu^{2+}\equiv I_{2}\equiv 2S_{2}O_{3}^{2-}}$: one mole of thiosulphate per mole of copper(II) — consistent with n-factors of 1 for both.
In the half-reaction balancer choose "dichromate + iron(II)" (acidic) and step to the end. How many $\mathrm{H^{+}}$ appear in the balanced equation, and what is the mole ratio dichromate : iron(II)?
1. Trusting "O = −2" blindly. If the answer exceeds the element's maximum ($\mathrm{CrO_{5}}$ $+10$, $\mathrm{H_{2}SO_{5}}$ $+8$, $\mathrm{K_{3}CrO_{8}}$ $+13$), the species contains peroxide oxygen. The true values are $+6$, $+6$, $+5$.
2. Reporting an average as if it were real. $\mathrm{Fe_{3}O_{4}}$ ($+\tfrac83$), $\mathrm{S_{4}O_{6}^{2-}}$ ($+2.5$), $\mathrm{NH_{4}NO_{3}}$ ($+1$), $\mathrm{CH_{3}COOH}$ ($0$) — the question may ask for the individual values, which come from the structure.
3. Using one n-factor for $\mathrm{KMnO_{4}}$ in every medium. It is $5$ in acid, $3$ in neutral/weakly basic solution, $1$ in strongly basic solution. Likewise $\mathrm{FeC_{2}O_{4}}$ is $3$, not $1$ — both ions are oxidised.
4. Leaving $\mathrm{H^{+}}$ in a basic-medium answer. Convert with $\mathrm{OH^{-}}$ on both sides and cancel water; an equation in base must contain $\mathrm{OH^{-}}$ and $\mathrm{H_{2}O}$ only.
5. Counting all of a reagent as oxidant. In $\mathrm{3Cu+8HNO_{3}}$ only 2 of 8 $\mathrm{HNO_{3}}$ are reduced; in electron balances count only the atoms whose oxidation number changes.
Which is the correctly balanced half-reaction for $\mathrm{MnO_{4}^{-}\rightarrow MnO_{2}}$ in basic solution?
Exercises
Molar masses as in the conventions at the top of the section. "Acidic" means dilute sulphuric acid.
- 1 Find the oxidation number of P in $\mathrm{H_{3}PO_{3}}$ and in $\mathrm{H_{4}P_{2}O_{7}}$.
- 2 Find the oxidation number of S in $\mathrm{H_{2}S_{2}O_{7}}$ (oleum) and the average value in $\mathrm{Na_{2}S_{2}O_{3}}$.
- 3 Find the oxidation number of Cr in $\mathrm{K_{3}CrO_{8}}$, given that the anion contains four peroxide groups. What would the naive rule (O $=-2$) give?
- 4 Find the average oxidation number of Mn in $\mathrm{Mn_{3}O_{4}}$ and suggest the individual values.
- 5 Carbon suboxide $\mathrm{C_{3}O_{2}}$ has the structure $\mathrm{O{=}C{=}C{=}C{=}O}$. Find the average oxidation number of C and the value for each carbon.
- 6 Find the oxidation number of N in $\mathrm{N_{2}H_{4}}$, $\mathrm{NH_{2}OH}$ and $\mathrm{N_{2}O}$.
- 7 Find the oxidation number of O in $\mathrm{O_{2}F_{2}}$, $\mathrm{BaO_{2}}$, $\mathrm{CsO_{2}}$ and $\mathrm{O_{3}}$.
- 8 Find the oxidation number of the metal in $\mathrm{K_{4}[Fe(CN)_{6}]}$, $\mathrm{Ni(CO)_{4}}$ and $\mathrm{[Co(NH_{3})_{5}Cl]Cl_{2}}$.
- 9 Of $\mathrm{KMnO_{4}}$, $\mathrm{MnO_{2}}$, $\mathrm{K_{2}Cr_{2}O_{7}}$, $\mathrm{SO_{2}}$, $\mathrm{H_{2}SO_{4}}$, $\mathrm{HNO_{2}}$, $\mathrm{HNO_{3}}$ and $\mathrm{H_{2}O_{2}}$, how many can act only as oxidising agents (through the central atom)?
- 1 In $\mathrm{H_{2}S(g)+Cl_{2}(g)\rightarrow 2HCl(g)+S(s)}$, identify the species oxidised, the species reduced, the oxidising agent and the reducing agent.
- 2 Classify $\mathrm{2Pb(NO_{3})_{2}(s)\xrightarrow{\Delta}2PbO(s)+4NO_{2}(g)+O_{2}(g)}$ and identify the elements oxidised and reduced.
- 3 Classify $\mathrm{Fe_{2}O_{3}(s)+2Al(s)\rightarrow Al_{2}O_{3}(s)+2Fe(l)}$.
- 4 Is $\mathrm{NH_{4}NO_{2}(s)\xrightarrow{\Delta}N_{2}(g)+2H_{2}O(g)}$ a redox reaction? If so, of which kind?
- 5 Explain why fluorine never disproportionates, while chlorine, bromine and iodine do in alkali.
- 6 Show that $\mathrm{4KClO_{3}(s)\xrightarrow{\Delta}3KClO_{4}(s)+KCl(s)}$ is a disproportionation, and find the number of electrons transferred in the equation as written.
- 7 Is $\mathrm{Cr_{2}O_{7}^{2-}(aq)+2OH^{-}(aq)\rightarrow 2CrO_{4}^{2-}(aq)+H_{2}O(l)}$ redox? Justify.
- 8 How many of these are redox reactions? (i) $\mathrm{Zn+CuSO_{4}\rightarrow ZnSO_{4}+Cu}$ (ii) $\mathrm{AgNO_{3}+NaCl\rightarrow AgCl+NaNO_{3}}$ (iii) $\mathrm{2Cu^{+}\rightarrow Cu^{2+}+Cu}$ (iv) $\mathrm{SO_{3}+H_{2}O\rightarrow H_{2}SO_{4}}$ (v) $\mathrm{3NO_{2}+H_{2}O\rightarrow 2HNO_{3}+NO}$ (vi) $\mathrm{BaCl_{2}+H_{2}SO_{4}\rightarrow BaSO_{4}+2HCl}$ (vii) $\mathrm{2FeCl_{3}+SnCl_{2}\rightarrow 2FeCl_{2}+SnCl_{4}}$
- 9 In $\mathrm{P_{4}(s)+3NaOH(aq)+3H_{2}O(l)\rightarrow PH_{3}(g)+3NaH_{2}PO_{2}(aq)}$, how many of the four P atoms of each $\mathrm{P_{4}}$ are oxidised?
- 1 Acidic: $\mathrm{MnO_{4}^{-}+H_{2}O_{2}\rightarrow Mn^{2+}+O_{2}}$. What is the coefficient of $\mathrm{H^{+}}$?
- 2 Acidic: $\mathrm{Cr_{2}O_{7}^{2-}+I^{-}\rightarrow Cr^{3+}+I_{2}}$.
- 3 Acidic: $\mathrm{MnO_{4}^{-}+C_{2}O_{4}^{2-}\rightarrow Mn^{2+}+CO_{2}}$. Find the sum of all the coefficients.
- 4 Basic: $\mathrm{MnO_{4}^{-}+SO_{3}^{2-}\rightarrow MnO_{2}+SO_{4}^{2-}}$.
- 5 Basic (hot): $\mathrm{Cl_{2}\rightarrow Cl^{-}+ClO_{3}^{-}}$.
- 6 Basic: $\mathrm{Cr(OH)_{3}+IO_{3}^{-}\rightarrow CrO_{4}^{2-}+I^{-}}$. What is the coefficient of $\mathrm{OH^{-}}$?
- 7 Oxidation-number method: $\mathrm{P_{4}+HNO_{3}\rightarrow H_{3}PO_{4}+NO_{2}+H_{2}O}$ (concentrated acid).
- 8 Acidic: $\mathrm{Zn+NO_{3}^{-}\rightarrow Zn^{2+}+NH_{4}^{+}}$ (very dilute nitric acid). What is the coefficient of $\mathrm{H^{+}}$?
- 1 Give the n-factor of $\mathrm{KMnO_{4}}$ in acidic, in neutral and in strongly basic solution.
- 2 Find the n-factor of $\mathrm{Fe_{2}(C_{2}O_{4})_{3}}$ (iron(III) oxalate) when titrated with acidified $\mathrm{KMnO_{4}}$.
- 3 What volume of $0.020\ \mathrm{mol\,L^{-1}}$ $\mathrm{KMnO_{4}}$ (acidic) oxidises $30.0\ \mathrm{mL}$ of $0.12\ \mathrm{mol\,L^{-1}}$ $\mathrm{FeSO_{4}}$?
- 4 What mass of $\mathrm{K_{2}Cr_{2}O_{7}}$ ($294.2\ \mathrm{g\,mol^{-1}}$) is needed to oxidise $0.0300\ \mathrm{mol}$ of $\mathrm{Fe^{2+}}$ in acid?
- 5 $25.0\ \mathrm{mL}$ of a hydrogen peroxide solution needs $20.0\ \mathrm{mL}$ of $0.0200\ \mathrm{mol\,L^{-1}}$ $\mathrm{KMnO_{4}}$ (acidic). Find the molarity of the $\mathrm{H_{2}O_{2}}$.
- 6 Excess KI is added to $10.0\ \mathrm{mL}$ of a copper(II) sulphate solution; the iodine released needs $16.0\ \mathrm{mL}$ of $0.100\ \mathrm{mol\,L^{-1}}$ $\mathrm{Na_{2}S_{2}O_{3}}$. Find the molarity of $\mathrm{Cu^{2+}}$.
- 7 Find the n-factor of $\mathrm{Cl_{2}}$ in $\mathrm{3Cl_{2}+6OH^{-}\rightarrow 5Cl^{-}+ClO_{3}^{-}+3H_{2}O}$.
- 8 A solution contains both $\mathrm{Fe^{2+}}$ and $\mathrm{Fe^{3+}}$. $25.0\ \mathrm{mL}$ needs $15.0\ \mathrm{mL}$ of $0.0200\ \mathrm{mol\,L^{-1}}$ $\mathrm{KMnO_{4}}$. Another $25.0\ \mathrm{mL}$ is first passed through a zinc reductor (all iron becomes $\mathrm{Fe^{2+}}$) and then needs $40.0\ \mathrm{mL}$ of the same $\mathrm{KMnO_{4}}$. Find the molarity of $\mathrm{Fe^{3+}}$ in the original solution.
E1. JEE Main · MCQ The oxidation states of chromium in $\mathrm{CrO_{5}}$ and of sulphur in $\mathrm{H_{2}S_{2}O_{8}}$ are, respectively, (A) $+10$, $+7$ (B) $+6$, $+6$ (C) $+6$, $+7$ (D) $+10$, $+6$
E2. JEE Main · Numerical Excess potassium iodide is added to $25.0\ \mathrm{mL}$ of a copper(II) sulphate solution. The iodine liberated requires $20.0\ \mathrm{mL}$ of $0.20\ \mathrm{mol\,L^{-1}}$ sodium thiosulphate for complete reaction. Find the mass of copper (in mg) present in the $25.0\ \mathrm{mL}$ sample ($\mathrm{Cu}=63.5\ \mathrm{g\,mol^{-1}}$). Give the answer to the nearest integer.
E3. JEE Main · MCQ Which of the following is a disproportionation reaction? (A) $\mathrm{2KClO_{3}\rightarrow 2KCl+3O_{2}}$ (B) $\mathrm{Cr_{2}O_{7}^{2-}+2OH^{-}\rightarrow 2CrO_{4}^{2-}+H_{2}O}$ (C) $\mathrm{Zn+Cu^{2+}\rightarrow Zn^{2+}+Cu}$ (D) $\mathrm{2Cu^{+}\rightarrow Cu^{2+}+Cu}$
E4. JEE Main · Numerical In acidic solution permanganate oxidises sulphite: $x\,\mathrm{MnO_{4}^{-}}+y\,\mathrm{SO_{3}^{2-}}+z\,\mathrm{H^{+}}\rightarrow$ products ($\mathrm{Mn^{2+}}$, $\mathrm{SO_{4}^{2-}}$, $\mathrm{H_{2}O}$). For the equation balanced with the smallest whole numbers, find $x+y+z$. Give the answer to the nearest integer.
E5. JEE Main · MCQ The equivalent mass of $\mathrm{KMnO_{4}}$ (molar mass $158\ \mathrm{g\,mol^{-1}}$) when it oxidises a reductant in weakly alkaline solution and is itself reduced to $\mathrm{MnO_{2}}$ is (A) $52.7\ \mathrm{g}$ (B) $31.6\ \mathrm{g}$ (C) $158\ \mathrm{g}$ (D) $79.0\ \mathrm{g}$
E6. JEE Main · Numerical What volume (in mL) of $0.020\ \mathrm{mol\,L^{-1}}$ $\mathrm{KMnO_{4}}$ in acidic medium is required to oxidise completely $30\ \mathrm{mL}$ of $0.050\ \mathrm{mol\,L^{-1}}$ iron(II) oxalate solution? Give the answer to the nearest integer.
Research question. How much vitamin C do fresh, packaged and boiled fruit juices really contain — and how fast is it lost once the juice is exposed to air and heat?
Why it matters. Vitamin C (ascorbic acid) is a reducing agent; that is exactly why it protects cells from oxidation, and also why it is destroyed by air, light and cooking. Food-safety laboratories in many countries check label claims on juices and supplements with redox titrations. The vitamin is oxidised by iodine, $\mathrm{C_{6}H_{8}O_{6}+I_{2}\rightarrow C_{6}H_{6}O_{6}+2HI}$, with n-factor $2$ for ascorbic acid, so a cheap iodine solution and a starch indicator make a working analytical method.
What to do.
- Make a dilute iodine solution (a little iodine tincture or povidone-iodine antiseptic in water) and a starch indicator (boil a pinch of starch in water and cool).
- Standardise it: dissolve a vitamin C tablet of known content (say $500\ \mathrm{mg}$) in $250\ \mathrm{mL}$ of water and titrate $10.0\ \mathrm{mL}$ portions with the iodine solution until the first permanent blue-black colour. Calculate the mass of vitamin C equivalent to $1\ \mathrm{mL}$ of iodine solution.
- Titrate $10.0\ \mathrm{mL}$ of freshly squeezed orange or lemon juice (strained), a packaged juice, and the fresh juice after boiling for 5 minutes. Do each at least twice.
- Leave a portion of fresh juice open on the bench and titrate it again after 1, 3 and 24 hours.
- Express every result in $\mathrm{mg}$ per $100\ \mathrm{mL}$ and compare with the label.
Tools: Iodine solution, starch, a vitamin C tablet, a $10\ \mathrm{mL}$ syringe or pipette, a dropper or burette (a $1\ \mathrm{mL}$ syringe works for small titres), white tile, spreadsheet.
Hand in: A results table with replicate titres, the calculation for one sample written with the law of equivalence, a bar chart of vitamin C content for the samples, a graph of content against time for the exposed juice, and one paragraph on the sources of error (coloured juices hide the end point; other reducing substances in juice also react).
Going further. Is the loss on standing first order (does the logarithm of the content fall linearly with time)? You will meet that test in the chemical kinetics unit.
🧪 Self-check quiz
Q1. The oxidation number of oxygen in $\mathrm{OF_{2}}$ is
Q2. In $\mathrm{3Cu+8HNO_{3}\rightarrow 3Cu(NO_{3})_{2}+2NO+4H_{2}O}$, the fraction of the nitric acid that acts as an oxidising agent is
Q3. Which species can act both as an oxidising agent and as a reducing agent?
Q4. The n-factor of $\mathrm{K_{2}Cr_{2}O_{7}}$ when it is reduced to $\mathrm{Cr^{3+}}$ in acidic solution is
Q5. The equivalent mass of oxalic acid dihydrate, $\mathrm{H_{2}C_{2}O_{4}\cdot2H_{2}O}$ ($M=126\ \mathrm{g\,mol^{-1}}$), in its titration with acidified $\mathrm{KMnO_{4}}$ is