Chapter 14 · Some Basic Principles of Organic Chemistry

14.1 Tetravalency of Carbon, Classification and IUPAC Nomenclature

Carbon forms four bonds, bends them in three characteristic ways ($sp^3$, $sp^2$, $sp$), and links to itself without limit. This section shows how to read those shapes off a formula, how to draw organic molecules quickly, how to sort them into families by their functional groups, and how to give every structure one unambiguous IUPAC name.

More than a hundred million organic compounds have been registered by chemists, and new ones are added every day — far more than all the compounds of the other elements put together. Almost all of them are built from a handful of elements: carbon, hydrogen, oxygen, nitrogen, the halogens and sulphur. What makes carbon special is that it forms four strong covalent bonds, that it bonds to itself in chains and rings of any length, and that it can do so with single, double or triple bonds. The painkiller paracetamol, the polymer in a plastic bottle and the DNA in your cells are all variations on this one theme.

With so many compounds, two skills come before everything else in organic chemistry. The first is to see a molecule from its formula: which atoms are flat, which are linear, how many σ and π bonds it has, what family it belongs to. The second is to name it so that the name leads back to exactly one structure. This section builds both skills: the tetravalency and hybridisation of carbon, the ways of writing structures (including the degree of unsaturation of a molecular formula), the classification of organic compounds by skeleton and by functional group, and the IUPAC system of nomenclature. Isomers are the subject of Section 14.2, and bond fission, reactive intermediates and electronic effects that of Section 14.3. You only need the covalent-bonding ideas of Section 3.3 (hybridisation, σ and π bonds).

Tetravalency of carbon, hybridisation and shape

A carbon atom ($Z=6$) has the ground-state configuration $1s^{2}\,2s^{2}\,2p^{2}$, with only two unpaired electrons. Yet carbon almost always forms four bonds. The explanation is that one $2s$ electron is promoted to the empty $2p$ orbital, giving four half-filled orbitals ($2s^{1}2p^{3}$). The promotion costs energy, but forming two extra bonds releases much more, so the tetravalent state is the stable one. The four orbitals then mix (hybridise) in one of three ways, depending on how many π bonds the carbon makes.

📘 Definition 14.1 — Tetravalency and catenation

Carbon is tetravalent: in its stable compounds every carbon atom forms four covalent bonds (counting a double bond as two and a triple bond as three). Carbon also shows catenation — the ability of atoms of one element to bond to one another in long chains, branched chains and rings. Catenation is strongest for carbon because the C–C bond is short and strong (about $348\ \mathrm{kJ\,mol^{-1}}$), carbon has no lone pairs to weaken it by repulsion, and C–C, C–H bonds are not easily attacked.

📐 Rule 14.1 — Hybridisation of carbon (and of N, O) from the bonds it makes

A carbon atom that forms only single bonds is $sp^{3}$; one that forms one double bond is $sp^{2}$; one that forms a triple bond or two double bonds is $sp$:

Bonds on the carbonπ bondsHybridisationShape round CAngle% s
4 single0$sp^{3}$tetrahedral$109.5^\circ$25
1 double + 2 single1$sp^{2}$trigonal planar$120^\circ$33.3
1 triple + 1 single, or 2 double2$sp$linear$180^\circ$50

Equivalently, the number of hybrid orbitals equals the steric number — the number of σ-bonded atoms plus lone pairs on the atom. This also works for heteroatoms: the O of an alcohol or ether (2 σ + 2 lone pairs) is $sp^{3}$, the N of an amine (3 σ + 1 lone pair) is $sp^{3}$, the N of a nitrile $\mathrm{{-}C{\equiv}N}$ (1 σ + 1 lone pair) is $sp$, and a carbonyl O (1 σ + 2 lone pairs) is taken as $sp^{2}$.

Each single bond is one σ bond; a double bond is one σ + one π; a triple bond is one σ + two π. Hence for any molecule

$$\text{number of σ bonds}=\text{total number of bonds (each C–H, O–H … counted)},$$ $$\text{number of π bonds}=\sum(\text{bond order}-1).$$

Why the shapes follow. Hybrid orbitals point as far apart as possible: four $sp^{3}$ orbitals to the corners of a tetrahedron, three $sp^{2}$ orbitals to the corners of a triangle, two $sp$ orbitals in opposite directions. In ethene, each carbon keeps one unhybridised $2p$ orbital standing perpendicular to the plane of the $sp^{2}$ orbitals; these two $p$ orbitals overlap sideways to form the π bond. Sideways overlap needs the two $p$ orbitals to be parallel, so all six atoms of ethene lie in one plane, and the molecule cannot twist about the C=C bond without breaking the π bond — the origin of geometrical isomerism (Section 14.2). In ethyne the two unhybridised $p$ orbitals on each carbon form two π bonds at right angles, a cylinder of electron density round the C–C axis.

s character, bond length and electronegativity. An $s$ orbital holds its electrons closer to the nucleus than a $p$ orbital. The more $s$ character in a hybrid, the shorter and stronger the bonds it forms, and the more strongly the carbon attracts the bonding electrons. So the electronegativity of carbon rises in the order $sp^{3}\lt sp^{2}\lt sp$. This is why the C–H bond of ethyne is weakly acidic: ethyne reacts with sodium amide to give sodium ethynide, while ethene and ethane do not.

BondC–C (ethane)C=C (ethene)C≡C (ethyne)
Carbon hybridisation$sp^{3}$$sp^{2}$$sp$
C–C bond length / pm154134120
C–C bond enthalpy / $\mathrm{kJ\,mol^{-1}}$348614839
C–H bond length / pm109108106

Notice that a double bond is not twice as strong as a single bond: the π bond ($614-348\approx266\ \mathrm{kJ\,mol^{-1}}$) is weaker than the σ bond, because sideways overlap is poorer than head-on overlap. That is why alkenes and alkynes react by breaking the π bond (addition reactions), while the σ framework stays intact.

Shapes of whole molecules. To decide which atoms lie in one plane or on one line, look at each multiple bond. An $sp^{2}$ carbon and the three atoms attached to it are coplanar, and for a C=C bond the two carbons and all four atoms attached to them share one plane. An $sp$ carbon and its two neighbours are collinear, and a chain $\mathrm{X{-}C{\equiv}C{-}Y}$ puts four atoms on one straight line. Single bonds rotate freely, so an $sp^{3}$ group attached to such a plane can turn until one of its atoms lies in that plane too.

✏️ Example 1 — Counting σ and π bonds; hybridisation
For (a) propenenitrile $\mathrm{CH_{2}{=}CH{-}C{\equiv}N}$ (acrylonitrile, the monomer of acrylic fibres) and (b) but-3-en-2-one $\mathrm{CH_{3}{-}CO{-}CH{=}CH_{2}}$, state the hybridisation of every carbon and count the σ and π bonds.
(a) Hybridisation $\mathrm{\overset{1}{C}H_{2}{=}\overset{2}{C}H{-}\overset{3}{C}{\equiv}N}$: C1 and C2 each have one π bond → $sp^{2}$; C3 has a triple bond → $sp$; the N (1 σ + 1 lone pair) is $sp$ too.
(a) Bonds Molecular formula $\mathrm{C_{3}H_{3}N}$. Bonds between heavy atoms: C1=C2, C2–C3, C3≡N (3); C–H bonds: 3. σ bonds $=3+3=6$. π bonds $=(2-1)+(3-1)=3$.
(b) $\mathrm{\overset{1}{C}H_{3}{-}\overset{2}{C}O{-}\overset{3}{C}H{=}\overset{4}{C}H_{2}}$: C1 $sp^{3}$; C2 (C=O) $sp^{2}$; C3 and C4 $sp^{2}$. Heavy-atom bonds C1–C2, C2=O, C2–C3, C3=C4 (4) and 6 C–H bonds: σ $=10$, π $=2$.
Check A quick check on (a): $\mathrm{C_{3}H_{3}N}$ has 7 atoms. Any molecule with $N$ atoms and no rings has exactly $N-1$ σ bonds: $7-1=6$ ✓. For (b), $\mathrm{C_{4}H_{6}O}$ has 11 atoms → 10 σ ✓.
✏️ Example 2 — Atoms on a line and in a plane
Pent-1-en-3-yne is $\mathrm{CH_{2}{=}CH{-}C{\equiv}C{-}CH_{3}}$. (a) What is the largest number of atoms that lie on one straight line? (b) What is the largest number of atoms that can lie in one plane? (c) How many atoms can never lie in that plane?
Find (b), the maximum number of coplanar atoms, before you open the solution:
Hybridisation C1, C2: $sp^{2}$; C3, C4: $sp$; C5: $sp^{3}$. The molecule $\mathrm{C_{5}H_{6}}$ has 11 atoms.
(a) Line C3 and C4 are $sp$, so C2–C3≡C4–C5 is straight: 4 atoms on one line (no H lies on it).
(b) Plane The C1=C2 unit is planar: C1, its two H, C2, its H and C3 — 6 atoms. C3 lies on the straight line through C2, C3, C4 and C5, and that line lies in the plane (it contains two points of it, C2 and C3). That adds C4 and C5: 8 atoms. The $\mathrm{CH_{3}}$ group rotates freely about the C4–C5 axis, which lies in the plane, so one of its H atoms can be turned into the plane: 9 atoms.
(c) The other two H atoms of the methyl group sit above and below the plane (tetrahedral angles round C5): $11-9=2$ atoms.

In the hybridisation explorer choose pent-1-en-4-yne, $\mathrm{CH_{2}{=}CH{-}CH_{2}{-}C{\equiv}CH}$. What will the readouts show?

Select pent-1-en-4-yne: the readouts show $sp^{3}/sp^{2}/sp$ carbons $=1/2/2$, σ bonds $=10$ and π bonds $=3$. The formula is $\mathrm{C_{5}H_{6}}$: 4 bonds join the carbons and 6 C–H bonds hang on them, all σ, so σ $=10$ (or: 11 atoms, no ring → $11-1=10$). The C=C gives one π and the C≡C two. Only C3, the $\mathrm{CH_{2}}$ between the two multiple bonds, is $sp^{3}$ — press Play to step through the atoms and watch the angle at each one change from $120^\circ$ to $109.5^\circ$ to $180^\circ$.
Interactive 1 — Hybridisation Explorer: σ, π and Shape Atom by Atom

Choose a molecule. Every carbon (and N or O) is coloured by its hybridisation — blue $sp^{3}$, green $sp^{2}$, red $sp$ — worked out from the bonds it makes. Move the atom slider, or press Play, to visit the atoms one at a time: the panel below the molecule shows the σ and π bonds on that atom, its lone pairs, shape and bond angle. The readouts count the σ and π bonds of the whole molecule, C–H and O–H bonds included.

1
$sp^{3}$ / $sp^{2}$ / $sp$ carbons—
σ bonds—
π bonds—
formula—

In propa-1,2-diene (allene), $\mathrm{CH_{2}{=}C{=}CH_{2}}$, the central carbon is

Writing structures and the degree of unsaturation

The same molecule can be written in several ways, each with a purpose. A full structural formula is clear but slow to draw; a bond-line formula is fast and shows the skeleton at a glance; a wedge–dash drawing shows the arrangement in space. You must be able to move between them quickly — most JEE Main organic questions give the structure in only one of these forms.

📘 Definition 14.2 — Ways of representing an organic molecule
  • Complete (expanded) structural formula — every atom and every bond is drawn as a dash: a single bond as one dash, a double bond as two, a triple bond as three. Lone pairs may be shown as dots (the Lewis structure).
  • Condensed structural formula — some or all bonds are omitted and identical groups are grouped: $\mathrm{CH_{3}CH_{2}CH_{2}CH_{3}}$ or $\mathrm{CH_{3}(CH_{2})_{2}CH_{3}}$ for butane; a branch is written in brackets after the carbon that carries it: $\mathrm{CH_{3}CH(CH_{3})CH_{3}}$.
  • Bond-line (skeletal) formula — carbon atoms are not written: every corner and every free line end is a carbon, and each carbon carries enough H atoms (not drawn) to make four bonds. Chains are drawn as zig-zags, double and triple bonds as two or three lines. Heteroatoms (O, N, S, halogens) and the H atoms attached to them are written.
  • Three-dimensional (wedge–dash) formula — round a tetrahedral carbon, bonds in the plane of the paper are plain lines, a solid wedge is a bond pointing towards the viewer and a hashed wedge a bond pointing away.

Reading a bond-line formula. Count the carbons (corners plus line ends), then give each carbon $4-(\text{number of bonds drawn to it})$ hydrogens. A carbon at a line end with one single bond is $\mathrm{CH_{3}}$; a corner with two single bonds is $\mathrm{CH_{2}}$; a corner with three lines is CH; a corner with four lines carries no H. A carbon in a double bond counts that bond twice.

Degree of unsaturation. An acyclic alkane has the most hydrogen a carbon skeleton can hold: $\mathrm{C_{n}H_{2n+2}}$. Every ring or π bond removes two H atoms from this maximum (closing a ring or making a double bond joins two carbons that each lose an H). So the number of "missing H pairs" in a formula counts rings plus π bonds. A halogen replaces an H, so it counts as one H; an O or S atom is inserted into a bond (C–O–C or C–O–H) without changing the H count, so it is ignored; an N atom brings one extra H with it ($\mathrm{CH_{3}NH_{2}}$ is $\mathrm{CH_{5}N}$), so subtract one N from the H count, or equivalently add N to the maximum.

📐 Rule 14.2 — Degree of unsaturation (double-bond equivalent)

For a molecular formula $\mathrm{C_{c}H_{h}N_{n}O_{o}X_{x}}$ (X = halogen; O and S do not enter),

$$\text{DoU}=\frac{2c+2+n-h-x}{2}=\text{rings}+\text{π bonds}.$$

A double bond counts 1, a triple bond 2, a ring 1, a benzene ring 4 (one ring + three π bonds). The DoU of a neutral molecule is always a whole number $\ge 0$; a fraction means the formula is impossible (or is a radical or an ion).

🧭 Problem-solving strategy — From formula to structure
  1. Compute the DoU. DoU $=0$: acyclic and saturated (alkanes, alcohols, ethers, amines, haloalkanes). DoU $=1$: one ring or one C=C or one C=O. DoU $=2$: a triple bond, two double bonds, or a ring plus a double bond … DoU $\ge4$ with six or more carbons: suspect a benzene ring.
  2. Use the heteroatoms to choose the functional groups compatible with that DoU (a C=O uses up one unit).
  3. Count the carbons and hydrogens of your proposed structure and check the formula.
✏️ Example 3 — Carvone from its bond-line formula
Carvone is the compound that gives spearmint leaves their smell. Its bond-line formula is shown below. (a) Write its molecular formula. (b) Find its degree of unsaturation and check it against the structure. (c) How many carbons are $sp^{3}$ and how many $sp^{2}$? How many π bonds are there?
Count the $sp^{3}$ carbons in carvone before you open the solution:
(a) Carbons Ring: 6. Methyl on the ring: 1. Side group $\mathrm{{-}C({=}CH_{2})CH_{3}}$: 3. Total $c=10$. One O.
(a) Hydrogens Ring: C=O carbon 0, C(CH₃)= 0, =CH– 1, two $\mathrm{CH_{2}}$ 4, CH bearing the side group 1 → 6. Methyl 3. Side group: C 0, $\mathrm{{=}CH_{2}}$ 2, $\mathrm{CH_{3}}$ 3 → 5. Total $h=14$: carvone is $\mathrm{C_{10}H_{14}O}$.
(b) DoU $\dfrac{2(10)+2-14}{2}=4$. Structure: one ring + ring C=C + C=O + side-chain C=C $=4$ ✓.
(c) $sp^{2}$: the C=O carbon, the two ring C=C carbons and the two side-chain C=C carbons $=5$. $sp^{3}$: two ring $\mathrm{CH_{2}}$, the ring CH, two $\mathrm{CH_{3}}$ $=5$. π bonds: 3 (the ring is not counted — it adds to the DoU but contains no π bond).

A hydrocarbon has the formula $\mathrm{C_{5}H_{8}}$. Which statement must be true?

Classification of organic compounds and functional groups

Organic compounds are sorted in two independent ways: by the shape of their carbon skeleton, and by the reactive group of atoms they carry.

📘 Definition 14.3 — Classification by skeleton
  • Acyclic (open-chain, aliphatic) compounds have straight or branched chains and no ring: butane, ethanol, ethanoic acid.
  • Cyclic (closed-chain) compounds contain one or more rings. If every ring atom is carbon they are homocyclic (carbocyclic); if the ring contains at least one other atom (O, N, S) they are heterocyclic.
  • Carbocyclic compounds are alicyclic if their rings behave like aliphatic compounds (cyclopropane, cyclohexane, cyclohexene), or aromatic if they contain a specially stable ring of delocalised π electrons. Aromatic compounds with one or more benzene rings are benzenoid (benzene, naphthalene, phenol); aromatic rings that are not benzene rings are non-benzenoid (tropolone, azulene).
  • Heterocyclic compounds may be aromatic (furan, thiophene, pyrrole, pyridine) or alicyclic (oxolane, also called tetrahydrofuran or THF; piperidine).

Functional groups. The C–C and C–H bonds of a molecule are strong and non-polar, so most of its chemistry happens at one particular atom or group of atoms — the functional group. Ethanol, propan-1-ol and butan-1-ol all burn, react with sodium to give hydrogen and are oxidised to acids, because all three carry –OH on a $\mathrm{CH_{2}}$ group. The functional group, not the size of the molecule, decides the reactions.

📘 Definition 14.4 — Functional group and homologous series

A functional group is an atom or group of atoms joined to the carbon skeleton in a particular way, which gives the compound its characteristic chemical properties (–OH, –CHO, –COOH, C=C, –Cl, $\mathrm{{-}NH_{2}}$ …).

A homologous series is a family of compounds with the same functional group, in which successive members (homologues) differ by one $\mathrm{{-}CH_{2}{-}}$ unit, i.e. by $14\ \mathrm{u}$ in molecular mass. Members of a series

  • can be represented by one general formula ($\mathrm{C_{n}H_{2n+2}}$ alkanes, $\mathrm{C_{n}H_{2n}}$ alkenes, $\mathrm{C_{n}H_{2n-2}}$ alkynes, $\mathrm{C_{n}H_{2n+1}OH}$ alkanols, $\mathrm{C_{n}H_{2n+1}COOH}$ alkanoic acids);
  • have similar chemical properties and can usually be prepared by the same general methods;
  • show a regular gradation of physical properties (boiling point, density, solubility in water) as the chain grows.
ClassFunctional groupExample (IUPAC name)
Alkene / alkyne$\mathrm{C{=}C}$ / $\mathrm{C{\equiv}C}$$\mathrm{CH_{2}{=}CH_{2}}$ ethene · $\mathrm{HC{\equiv}CH}$ ethyne
Haloalkane, haloarene$\mathrm{{-}X}$ (F, Cl, Br, I)$\mathrm{CH_{3}CH_{2}Cl}$ chloroethane · $\mathrm{C_{6}H_{5}Br}$ bromobenzene
Alcohol$\mathrm{{-}OH}$ on an $sp^{3}$ C$\mathrm{CH_{3}CH_{2}OH}$ ethanol
Phenol$\mathrm{{-}OH}$ on a benzene ring$\mathrm{C_{6}H_{5}OH}$ phenol
Ether$\mathrm{R{-}O{-}R'}$$\mathrm{CH_{3}OCH_{2}CH_{3}}$ methoxyethane
Aldehyde$\mathrm{{-}CHO}$$\mathrm{CH_{3}CHO}$ ethanal
Ketone$\mathrm{R{-}CO{-}R'}$$\mathrm{CH_{3}COCH_{3}}$ propanone
Carboxylic acid$\mathrm{{-}COOH}$$\mathrm{CH_{3}COOH}$ ethanoic acid
Ester$\mathrm{{-}COOR}$$\mathrm{CH_{3}COOCH_{2}CH_{3}}$ ethyl ethanoate
Acid halide$\mathrm{{-}COX}$$\mathrm{CH_{3}COCl}$ ethanoyl chloride
Acid anhydride$\mathrm{{-}CO{-}O{-}CO{-}}$$\mathrm{(CH_{3}CO)_{2}O}$ ethanoic anhydride
Amide$\mathrm{{-}CONH_{2}}$$\mathrm{CH_{3}CONH_{2}}$ ethanamide
Amine$\mathrm{{-}NH_{2}}$, $\mathrm{{>}NH}$, $\mathrm{{>}N{-}}$$\mathrm{CH_{3}CH_{2}NH_{2}}$ ethanamine
Nitrile (cyanide)$\mathrm{{-}C{\equiv}N}$$\mathrm{CH_{3}CN}$ ethanenitrile
Isocyanide$\mathrm{{-}N{\equiv}C}$$\mathrm{CH_{3}NC}$ methyl isocyanide
Nitro compound$\mathrm{{-}NO_{2}}$$\mathrm{CH_{3}NO_{2}}$ nitromethane
Thiol$\mathrm{{-}SH}$$\mathrm{CH_{3}CH_{2}SH}$ ethanethiol
Sulphide (thioether)$\mathrm{R{-}S{-}R'}$$\mathrm{CH_{3}SCH_{3}}$ dimethyl sulphide
Sulphonic acid$\mathrm{{-}SO_{3}H}$$\mathrm{C_{6}H_{5}SO_{3}H}$ benzenesulphonic acid

(IUPAC spells sulphur as sulfur; this course keeps the traditional British spelling in prose.)

📘 Definition 14.5 — Primary, secondary, tertiary and quaternary carbon

A carbon atom (in an $sp^{3}$ skeleton) is primary (1°), secondary (2°), tertiary (3°) or quaternary (4°) when it is bonded to one, two, three or four other carbon atoms. Hydrogen atoms take the label of the carbon that carries them (1° H on a $\mathrm{CH_{3}}$ … ). Alcohols and haloalkanes are classified by the carbon that carries the –OH or –X: $\mathrm{CH_{3}CH_{2}OH}$ is a 1° alcohol, $\mathrm{(CH_{3})_{2}CHOH}$ 2°, $\mathrm{(CH_{3})_{3}COH}$ 3°. Amines are different: they are classified by the number of carbon groups on the nitrogen — $\mathrm{RNH_{2}}$ 1°, $\mathrm{R_{2}NH}$ 2°, $\mathrm{R_{3}N}$ 3°.

✏️ Example 4 — Kinds of carbon and hydrogen in "iso-octane"
The reference compound of the petrol octane scale is 2,2,4-trimethylpentane, $\mathrm{(CH_{3})_{3}C{-}CH_{2}{-}CH(CH_{3})_{2}}$. (a) Classify every carbon as 1°, 2°, 3° or 4°. (b) How many 1°, 2° and 3° hydrogen atoms are there? (c) How many different kinds (chemically distinct sets) of hydrogen atoms does it have?
Count the primary hydrogens before you open the solution:
(a) Five $\mathrm{CH_{3}}$ groups, each bonded to one carbon: 1°. The $\mathrm{CH_{2}}$ (C3) is bonded to two carbons: 2°. The CH (C4) is bonded to three: 3°. C2 is bonded to four carbons: 4°.
(b) 1° H: $5\times3=15$; 2° H: 2; 3° H: 1; the 4° carbon has none. Total 18 ✓ ($\mathrm{C_{8}H_{18}}$).
(c) The three methyls on C2 are equivalent (9 H); the two methyls on C4 are equivalent (6 H) but differ from the first nine; then the $\mathrm{CH_{2}}$ (2 H) and the CH (1 H): 4 kinds.
Use Each kind of H, replaced by Cl, gives a different monochloro product — so iso-octane gives 4 structurally different monochlorides. Counting such products is a favourite JEE Main question (Section 14.2).

2-Methylpropan-2-amine, $\mathrm{(CH_{3})_{3}C{-}NH_{2}}$, is classified as a

Trivial and IUPAC nomenclature

Many organic compounds were named before their structures were known, often after their source: formic acid from ants (Latin formica), acetic acid from vinegar (acetum), urea from urine. These trivial (common) names are still in daily use, but they say nothing about structure and cannot be extended to millions of compounds. The IUPAC system (International Union of Pure and Applied Chemistry) builds the name from the structure by fixed rules, so that one name gives exactly one structure.

CompoundTrivial nameIUPAC name
$\mathrm{CH_{3}CH(CH_{3})CH_{3}}$isobutane2-methylpropane
$\mathrm{C(CH_{3})_{4}}$neopentane2,2-dimethylpropane
$\mathrm{HC{\equiv}CH}$acetyleneethyne
$\mathrm{CHCl_{3}}$chloroformtrichloromethane
$\mathrm{CH_{3}OH}$methyl alcohol (wood spirit)methanol
$\mathrm{HCHO}$formaldehydemethanal
$\mathrm{CH_{3}COCH_{3}}$acetonepropanone
$\mathrm{HCOOH}$ · $\mathrm{CH_{3}COOH}$formic acid · acetic acidmethanoic acid · ethanoic acid
$\mathrm{C_{6}H_{5}CH_{3}}$ · $\mathrm{C_{6}H_{5}OCH_{3}}$toluene · anisolemethylbenzene · methoxybenzene
$\mathrm{C_{6}H_{5}NH_{2}}$ · $\mathrm{C_{6}H_{5}COCH_{3}}$aniline · acetophenonebenzenamine · 1-phenylethan-1-one
$\mathrm{CH_{2}{=}CHCl}$ · $\mathrm{CH_{2}{=}CHCH_{2}Cl}$vinyl chloride · allyl chloridechloroethene · 3-chloroprop-1-ene

The parts of an IUPAC name. A name is assembled as prefixes + word root + primary suffix + secondary suffix. The word root gives the number of carbons in the parent chain: meth (1), eth (2), prop (3), but (4), pent (5), hex (6), hept (7), oct (8), non (9), dec (10). The primary suffix gives the saturation: -ane (all single), -ene (C=C), -yne (C≡C), with locants and multipliers (-diene, -en-yne). The secondary suffix names the principal functional group (-ol, -al, -one, -oic acid …). Prefixes name substituents (methyl, chloro, nitro, hydroxy …) with their locants, and the primary prefix cyclo marks a ring. Example: $\mathrm{CH_{3}CH(CH_{3})CH_{2}CH(OH)CH_{3}}$ is 4-methyl + pent + an + -2-ol = 4-methylpentan-2-ol. (The "e" of -ane is dropped before a suffix that starts with a vowel: pentan-2-ol, but pentane-2,4-dione.)

Alkyl groups. Removing one H from an alkane gives an alkyl group: methyl $\mathrm{CH_{3}{-}}$, ethyl $\mathrm{C_{2}H_{5}{-}}$, propyl $\mathrm{CH_{3}CH_{2}CH_{2}{-}}$, isopropyl $\mathrm{(CH_{3})_{2}CH{-}}$ (propan-2-yl), butyl $\mathrm{CH_{3}(CH_{2})_{3}{-}}$, sec-butyl $\mathrm{CH_{3}CH_{2}CH(CH_{3}){-}}$ (butan-2-yl), isobutyl $\mathrm{(CH_{3})_{2}CHCH_{2}{-}}$ (2-methylpropyl), tert-butyl $\mathrm{(CH_{3})_{3}C{-}}$ (2-methylpropan-2-yl), neopentyl $\mathrm{(CH_{3})_{3}CCH_{2}{-}}$ (2,2-dimethylpropyl). Unsaturated and aromatic groups: vinyl $\mathrm{CH_{2}{=}CH{-}}$ (ethenyl), allyl $\mathrm{CH_{2}{=}CHCH_{2}{-}}$ (prop-2-en-1-yl), phenyl $\mathrm{C_{6}H_{5}{-}}$, benzyl $\mathrm{C_{6}H_{5}CH_{2}{-}}$.

📐 Rule 14.3 — Choosing and numbering the parent chain
  1. Parent chain. Choose the chain that (a) contains the carbon(s) of the principal functional group, (b) contains the greatest number of multiple bonds, (c) is the longest, and (d) carries the greatest number of substituents — each criterion used only to break a tie in the one before. The carbon of –COOH, –CHO, –CN, –CONH₂, –COCl and –COOR is part of the chain and is C1. (This is the order used in Class 11–12 and in JEE Main. The 2013 IUPAC recommendations put chain length before unsaturation, which changes the parent only in unusual branched alkenes.)
  2. Numbering. Number from the end that gives the lowest locants, applying these tests in order and stopping at the first difference: (i) the principal functional group (the suffix); (ii) the multiple bonds, double and triple together; (iii) if (ii) is a tie, the double bond; (iv) all the prefixes taken together, compared term by term at the first point of difference (lowest locant set); (v) if still tied, the prefix that comes first in alphabetical order.
  3. Writing the name. Prefixes in alphabetical order, each with its locant(s); identical prefixes are combined with di-, tri-, tetra- (2,2-dimethyl). Multiplying prefixes (di, tri) and the italic sec-, tert- are ignored in alphabetising, but iso and neo are not (isopropyl is filed under "i"). Numbers are separated by commas, numbers from letters by hyphens.
📐 Rule 14.4 — Seniority of functional groups

When a compound has several functional groups, the most senior one is the principal functional group: it is named as the suffix and gets the lowest locant. All other groups are named as prefixes. Order of seniority (highest first):

GroupSuffix (principal)Prefix (substituent)
carboxylic acid –COOH-oic acid (-carboxylic acid on a ring)carboxy
sulphonic acid $\mathrm{{-}SO_{3}H}$-sulphonic acidsulpho
ester –COORalkyl …-oatealkoxycarbonyl
acid halide –COX-oyl halidehalocarbonyl
amide $\mathrm{{-}CONH_{2}}$-amidecarbamoyl
nitrile –CN-nitrilecyano
aldehyde –CHO-al (-carbaldehyde on a ring)formyl or oxo
ketone >C=O-oneoxo
alcohol –OH-olhydroxy
thiol –SH-thiolsulphanyl (mercapto)
amine $\mathrm{{-}NH_{2}}$-amineamino
alkene, alkyne-ene, -yne—
halogen, nitro, alkoxy, alkylnever suffixeshalo (chloro …), nitro, alkoxy, alkyl

(Anhydrides rank between acids and esters.) Ethers are named as alkoxyalkanes, the larger alkyl group being the parent: $\mathrm{CH_{3}OCH_{2}CH_{3}}$ methoxyethane. Esters are named "alkyl alkanoate", the alkyl on O first: $\mathrm{CH_{3}COOCH_{2}CH_{3}}$ ethyl ethanoate. Groups on the N of amines and amides get the locant N: $\mathrm{(CH_{3})_{2}NH}$ N-methylmethanamine.

🧭 Problem-solving strategy — Naming a compound in six steps
  1. Find all functional groups and pick the principal one (Rule 14.4).
  2. Choose the parent chain or ring (Rule 14.3, item 1). Look for chains that "turn the corner" into a branch — a branch written $\mathrm{C_{2}H_{5}}$ may be part of the longest chain.
  3. Number it (Rule 14.3, item 2): principal group → multiple bonds → double bond → all prefixes → alphabetical.
  4. Name and number the prefixes; alphabetise.
  5. Assemble: prefixes + root + -an-/-en-/-yn- + locant + suffix.
  6. Check: draw the structure back from your name and compare.

Cyclic compounds. A saturated ring is a cycloalkane (cyclopentane, cyclohexane). Substituents on a ring get the lowest locant set, with C1 at the principal group, or — with only prefixes — at the substituent first in alphabetical order: 1-ethyl-3-methylcyclohexane. In a cycloalkene the double bond is C1=C2, unless a principal group needs C1: cyclohex-2-en-1-ol. When –COOH, –CHO or –CN is attached to a ring, its carbon cannot be part of the ring, so the suffixes -carboxylic acid, -carbaldehyde, -carbonitrile are used: cyclohexanecarboxylic acid, $\mathrm{C_{6}H_{11}COOH}$.

Benzene derivatives. A single substituent is named as a prefix to benzene: chlorobenzene, nitrobenzene, ethylbenzene. Several common names are accepted by IUPAC and act as parents: toluene (methylbenzene), phenol, aniline (benzenamine), benzaldehyde, benzoic acid, anisole (methoxybenzene), styrene (ethenylbenzene), acetophenone. For two substituents the positions 1,2-, 1,3- and 1,4- are also called ortho (o-), meta (m-) and para (p-). The ring is numbered to give the lowest locants; if one group gives the parent name (–OH in phenol, –COOH in benzoic acid) its carbon is C1; otherwise C1 goes to the substituent first in alphabetical order: 1-bromo-3-chlorobenzene. Three nitro groups on phenol at 2, 4, 6 give 2,4,6-trinitrophenol (picric acid).

✏️ Example 5 — Naming open-chain compounds
Give the IUPAC names of (a) $\mathrm{CH_{3}CH(CH_{3})CH_{2}CH(C_{2}H_{5})CH_{3}}$; (b) $\mathrm{HC{\equiv}C{-}CH_{2}{-}CH{=}CH_{2}}$; (c) $\mathrm{CH_{3}COCH_{2}CH(OH)CH_{3}}$; (d) $\mathrm{CH_{3}CH_{2}{-}O{-}CH(CH_{3})_{2}}$.
(a) The written chain has five carbons, but the "$\mathrm{C_{2}H_{5}}$" continues it: the longest chain runs $\mathrm{CH_{3}{-}CH(CH_{3}){-}CH_{2}{-}CH(CH_{3}){-}CH_{2}{-}CH_{3}}$, six carbons (see the figure above Rule 14.4). Methyls at 2,4 (from the left) or 3,5 (from the right): 2,4-dimethylhexane.
(b) No principal group; five carbons with one C=C and one C≡C. From the $\mathrm{CH_{2}{=}}$ end the multiple bonds are at 1 and 4; from the $\mathrm{HC{\equiv}}$ end also at 1 and 4 — a tie, so the double bond gets the lower number: pent-1-en-4-yne (not pent-4-en-1-yne).
(c) Ketone outranks alcohol: the ketone is the suffix and must get the lowest locant. Numbering from the left puts C=O at 2 and OH at 4: 4-hydroxypentan-2-one.
(d) An ether: the larger group, propane (attached at its C2), is the parent, the smaller is ethoxy: 2-ethoxypropane (common name ethyl isopropyl ether).
✏️ Example 6 — Rings, benzene derivatives and polyfunctional compounds
Name the four compounds below.
(a) –COOH outranks –NO₂ and gives the parent benzoic acid; its ring carbon is C1. The nitro group is two carbons round: 3-nitrobenzoic acid (m-nitrobenzoic acid).
(b) Principal group –OH: its carbon is C1. Then the double bond gets the lowest locants, going round the ring towards it: C2=C3. Cyclohex-2-en-1-ol.
(c) $\mathrm{CH_{3}{-}CH(CN){-}CH_{2}{-}COOH}$: –COOH outranks –CN, so the COOH carbon is C1 and the chain runs C1 (COOH), C2 ($\mathrm{CH_{2}}$), C3 (CH), C4 ($\mathrm{CH_{3}}$). The nitrile is a substituent, cyano, on C3: 3-cyanobutanoic acid.
(d) An ester $\mathrm{CH_{3}CH_{2}COO{-}CH(CH_{3})_{2}}$: acid part propanoate (three carbons including C=O), alkyl part on O propan-2-yl (isopropyl): propan-2-yl propanoate (isopropyl propanoate).
Check In (c) note why the chain does not run through the CN carbon: both possible four-carbon chains from C1 have the same length, but a nitrile carbon can be part of a parent only when –CN is the principal group.

In the name builder set chain length $5$, principal group –OH (-ol) on drawn carbon $4$, substituent A methyl on drawn carbon $2$ and substituent B none. What name will it produce?

With these settings the readouts show "from left: –OH 4 · prefixes 2" and "from right: –OH 2 · prefixes 4"; the deciding rule is "principal group lowest" and the name is 4-methylpentan-2-ol. The –OH (the suffix) is compared first; once it has decided the direction, the methyl simply gets whatever number that direction gives it, even though 2 would have been lower. Press Play to watch the two numberings being compared.
Interactive 2 — IUPAC Name Builder: Which End Do You Number From?

Build an open-chain compound: choose the chain length, a principal group (or a C=C) and its position, and up to two substituents. Positions on the sliders are counted from the left end of the drawing. The widget numbers the chain from both ends, compares the locants in the IUPAC order — principal group, then the double bond, then all prefixes, then alphabetical order — and writes the name. Press Play to watch the left (red) and right (blue) numberings compete. Impossible structures (a carbon with five bonds, a methyl on a chain end) are flagged.

6 C523
numbering from left—
numbering from right—
deciding rule—
IUPAC name—
⚠️ JEE Main traps

1. Forgetting the C–H bonds when counting σ bonds. Every bond is one σ bond. Ethyne has 3 σ bonds (two C–H and one C–C), not 1. Quick check: an acyclic molecule of $N$ atoms has exactly $N-1$ σ bonds; each ring adds one.

2. Taking the drawn chain as the longest. A branch written as $\mathrm{C_{2}H_{5}}$ or $\mathrm{CH_{2}CH_{3}}$ often continues the longest chain. "2-Ethylbutane", "3-propylpentane" and "4-ethyl-2-methylpentane" are all wrong names.

3. Number the principal group first, not the substituents. 4-Methylpentan-2-ol, not 2-methylpentan-4-ol. And when the double and triple bonds tie, the double bond gets the lower number: pent-1-en-4-yne.

4. Alphabetical order. Ignore di-, tri-, sec- and tert-, but not iso: 4-ethyl-2,2-dimethylhexane ("e" before "m"), 4-isopropyl-2-methylheptane ("i" before "m").

5. Counting the functional-group carbon. In -oic acid, -al, -nitrile and -amide names the functional carbon is C1 of the chain: $\mathrm{CH_{3}CH_{2}CN}$ is propanenitrile (three carbons), not ethyl cyanide in IUPAC terms. On a ring, use -carboxylic acid / -carbaldehyde / -carbonitrile instead.

The IUPAC name of $\mathrm{CH_{2}{=}CH{-}CH_{2}{-}CH_{2}{-}OH}$ is

Exercises

Use $\mathrm{C=12}$, $\mathrm{H=1}$, $\mathrm{N=14}$, $\mathrm{O=16}$ where molar masses are needed. "Count" answers are whole numbers.

I
Tetravalency, hybridisation, σ and π bonds, shape.
  • 1 State the hybridisation of each carbon in pent-3-en-1-yne, $\mathrm{HC{\equiv}C{-}CH{=}CH{-}CH_{3}}$.
  • 2 How many σ and π bonds are there in pent-3-en-1-yne?
  • 3 How many σ and π bonds are there in benzene, $\mathrm{C_{6}H_{6}}$ (Kekulé structure)?
  • 4 How many σ bonds are there in propenoic acid, $\mathrm{CH_{2}{=}CH{-}COOH}$? Which of its atoms are $sp^{3}$?
  • 5 How many $sp^{3}$ carbons are there in 4-methylpent-2-yne, $\mathrm{CH_{3}{-}C{\equiv}C{-}CH(CH_{3}){-}CH_{3}}$?
  • 6 Arrange the C–H bonds of ethane, ethene and ethyne in order of increasing length, and explain which one is the most acidic.
  • 7 What is the percentage s character of the carbon orbital used in the C–H bond of $\mathrm{HCN}$? What is the shape of the molecule?
  • 8 What is the largest number of atoms of propene, $\mathrm{CH_{2}{=}CH{-}CH_{3}}$, that can lie in one plane?
  • 9 Explain why the four H atoms of allene, $\mathrm{CH_{2}{=}C{=}CH_{2}}$, do not all lie in one plane.
1 $\mathrm{\overset{1}{C}H{\equiv}\overset{2}{C}{-}\overset{3}{C}H{=}\overset{4}{C}H{-}\overset{5}{C}H_{3}}$: C1, C2 $sp$; C3, C4 $sp^{2}$; C5 $sp^{3}$.
2 $\mathrm{C_{5}H_{6}}$, 11 atoms, acyclic: σ $=10$ (4 C–C + 6 C–H). π $=2+1=3$.
3 6 C–C + 6 C–H $=12$ σ (12 atoms, one ring: $12-1+1=12$ ✓); π $=3$.
4 $\mathrm{C_{3}H_{4}O_{2}}$, 9 atoms, acyclic: σ $=8$; π $=2$ (C=C, C=O). The only $sp^{3}$ atom is the O of –OH (2 σ + 2 lone pairs); all three carbons are $sp^{2}$.
5 C1 ($\mathrm{CH_{3}}$), C4 (CH), C5 ($\mathrm{CH_{3}}$) and the methyl branch: 4. C2 and C3 are $sp$.
6 Length: ethyne (106 pm) $\lt$ ethene (108 pm) $\lt$ ethane (109 pm). Ethyne's carbon is $sp$ (50% s), the most electronegative, so it holds the C–H electron pair most tightly and lets $\mathrm{H^{+}}$ go most easily: ethyne is the most acidic.
7 The carbon in $\mathrm{H{-}C{\equiv}N}$ is $sp$: 50% s character. Linear molecule, $180^\circ$.
8 The C=C plane holds C1, C2, C3 and the three H on C1 and C2 (6 atoms); one H of the freely rotating $\mathrm{CH_{3}}$ can lie in it: 7.
9 The central carbon is $sp$; its two π bonds use two $p$ orbitals at right angles. Each terminal $\mathrm{CH_{2}}$ must lie in the plane perpendicular to the $p$ orbital it uses for its π bond, so the two $\mathrm{CH_{2}}$ planes are perpendicular to each other.
II
Structural formulas and degree of unsaturation.
  • 1 Write the complete, condensed and bond-line formulas of 3-methylpentan-2-one.
  • 2 Citral, the lemon-grass aroma, is $\mathrm{(CH_{3})_{2}C{=}CH{-}CH_{2}{-}CH_{2}{-}C(CH_{3}){=}CH{-}CHO}$. Write its molecular formula and find its degree of unsaturation.
  • 3 Find the degree of unsaturation of nicotine, $\mathrm{C_{10}H_{14}N_{2}}$.
  • 4 Find the degree of unsaturation of (a) $\mathrm{C_{6}H_{5}Cl}$, (b) $\mathrm{C_{3}H_{9}N}$, (c) $\mathrm{C_{4}H_{4}O}$, (d) $\mathrm{C_{2}H_{3}Cl_{3}}$.
  • 5 A hydrocarbon $\mathrm{C_{8}H_{8}}$ contains one benzene ring. How many further rings or π bonds does it have? Suggest a structure.
  • 6 2-Methylcyclohexan-1-one is a six-membered carbon ring with a C=O and a methyl group on the next carbon. How many H atoms does its molecule contain?
  • 7 Draw a wedge–dash formula of bromochlorofluoromethane, $\mathrm{CHBrClF}$, and its mirror image.
  • 8 Show that $\mathrm{C_{4}H_{7}}$ cannot be the formula of a stable neutral molecule.
1 Condensed $\mathrm{CH_{3}COCH(CH_{3})CH_{2}CH_{3}}$; bond-line: a five-carbon zig-zag with =O on C2 and a methyl on C3; the complete formula shows all 12 H ($\mathrm{C_{6}H_{12}O}$).
2 C: 2 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 $=10$; H: 6 + 0 + 1 + 2 + 2 + 0 + 3 + 1 + 1 $=16$: $\mathrm{C_{10}H_{16}O}$. DoU $=\tfrac{20+2-16}{2}=3$ (two C=C, one C=O).
3 $\tfrac{20+2+2-14}{2}=5$ (two rings; the pyridine ring has three π bonds).
4 (a) $\tfrac{12+2-5-1}{2}=4$ (benzene ring); (b) $\tfrac{6+2+1-9}{2}=0$; (c) $\tfrac{8+2-4}{2}=3$ (furan: ring + 2 C=C); (d) $\tfrac{4+2-3-3}{2}=0$.
5 DoU $=\tfrac{16+2-8}{2}=5$; the benzene ring accounts for 4, leaving 1: one C=C outside the ring — ethenylbenzene (styrene), $\mathrm{C_{6}H_{5}CH{=}CH_{2}}$.
6 $\mathrm{C_{7}H_{12}O}$: ring C=O carbon 0, CH bearing methyl 1, four ring $\mathrm{CH_{2}}$ 8, methyl 3 → 12 H. (DoU $=\tfrac{14+2-12}{2}=2$: ring + C=O ✓.)
7 C in the centre, e.g. H and F in the plane, Br on a wedge, Cl on a hashed wedge; the mirror image has Br hashed and Cl wedged. The two cannot be superimposed (Section 14.2).
8 DoU $=\tfrac{8+2-7}{2}=1.5$, not a whole number: an odd number of H on a C/H/O compound leaves an unpaired electron — a free radical, not a stable molecule.
III
Classification, functional groups and homologous series.
  • 1 Classify as acyclic, alicyclic, aromatic (benzenoid or not) or heterocyclic: hexane, cyclohexene, naphthalene, pyridine, oxolane, thiophene.
  • 2 Name the class of each: $\mathrm{CH_{3}CONH_{2}}$, $\mathrm{CH_{3}CN}$, $\mathrm{CH_{3}SH}$, $\mathrm{C_{6}H_{5}SO_{3}H}$, $\mathrm{CH_{3}NO_{2}}$, $\mathrm{CH_{3}COCl}$.
  • 3 Starting from methanol as the first member, what is the molar mass of the fifth member of the alkanol series?
  • 4 Write the general formula of the alkanoic acids and the formula of the member with molar mass $88\ \mathrm{g\,mol^{-1}}$.
  • 5 How many primary hydrogen atoms does 2-methylbutane have? How many secondary and tertiary?
  • 6 Classify as 1°, 2° or 3°: propan-2-ol, 2-methylpropan-2-ol, 2-methylpropan-1-ol, $\mathrm{(CH_{3})_{2}NH}$, $\mathrm{(CH_{3})_{3}CNH_{2}}$, $\mathrm{(CH_{3})_{3}N}$.
  • 7 How many secondary carbon atoms are there in 3-methylhexane?
  • 8 Vanillin, the flavour of vanilla, is 4-hydroxy-3-methoxybenzaldehyde. How many different functional groups (other than the ring) does it contain? Name them.
1 Hexane acyclic; cyclohexene alicyclic; naphthalene aromatic, benzenoid; pyridine heterocyclic, aromatic; oxolane heterocyclic, alicyclic; thiophene heterocyclic, aromatic.
2 Amide; nitrile; thiol; sulphonic acid; nitro compound; acid chloride (acid halide).
3 Fifth member: pentanol $\mathrm{C_{5}H_{11}OH}$, $M=5(12)+12(1)+16=88\ \mathrm{g\,mol^{-1}}$ (or $32+4\times14=88$).
4 $\mathrm{C_{n}H_{2n+1}COOH}$ (equivalently $\mathrm{C_{n}H_{2n}O_{2}}$ counting all C). $14m+32=88$ gives $m=4$ carbons in total: $\mathrm{C_{3}H_{7}COOH}$ (butanoic acid or 2-methylpropanoic acid).
5 $\mathrm{(CH_{3})_{2}CH{-}CH_{2}{-}CH_{3}}$: three $\mathrm{CH_{3}}$ → 9 primary H; the $\mathrm{CH_{2}}$ → 2 secondary; the CH → 1 tertiary.
6 Propan-2-ol 2°; 2-methylpropan-2-ol 3°; 2-methylpropan-1-ol 1°; $\mathrm{(CH_{3})_{2}NH}$ 2° amine; $\mathrm{(CH_{3})_{3}CNH_{2}}$ 1° amine; $\mathrm{(CH_{3})_{3}N}$ 3° amine.
7 $\mathrm{CH_{3}{-}CH_{2}{-}CH(CH_{3}){-}CH_{2}{-}CH_{2}{-}CH_{3}}$: the three $\mathrm{CH_{2}}$ groups (C2, C4, C5) are 2°: 3.
8 Three: aldehyde (–CHO), phenolic –OH and ether (–OCH₃).
IV
IUPAC nomenclature.
  • 1 Name $\mathrm{CH_{3}CH_{2}CH(CH_{3})CH(CH_{3})CH_{3}}$. How many carbons are in its parent chain?
  • 2 Name $\mathrm{(CH_{3})_{3}C{-}CH_{2}{-}CH(CH_{3})_{2}}$.
  • 3 Name $\mathrm{CH_{3}{-}CH{=}CH{-}CH_{2}{-}C{\equiv}CH}$. What is the locant of the double bond?
  • 4 Name $\mathrm{CH_{3}{-}CH(OH){-}CH_{2}{-}CHO}$. What is the locant of the –OH group?
  • 5 Name $\mathrm{CH_{3}COCH_{2}COOCH_{3}}$.
  • 6 Name $\mathrm{NC{-}CH_{2}{-}CH_{2}{-}COOH}$ and $\mathrm{HO{-}CH_{2}{-}CH_{2}{-}NH_{2}}$.
  • 7 Name the disubstituted benzene with Br and Cl in the meta positions, and the one with OH and CHO in the ortho positions.
  • 8 Write the structures of (a) 3-ethyl-2,2-dimethylpentane, (b) hex-2-en-4-yne, (c) 2-methylbutanoic acid, (d) N,N-dimethylethanamine.
  • 9 A student named a compound "2-ethylbutane". Give its correct name. How many carbons are in the correct parent chain?
1 Longest chain five carbons; methyls at 2,3 (from the right) versus 3,4: 2,3-dimethylpentane; parent chain 5 C.
2 Chain of five: methyls at 2,2,4 (from the left) versus 2,4,4: first point of difference: $2=2$, then $2\lt4$ → 2,2,4-trimethylpentane.
3 From the HC≡ end: triple 1, double 4 → {1,4}; from the other end: double 2, triple 5 → {2,5}. Lowest set {1,4}: hex-4-en-1-yne; double-bond locant 4.
4 Aldehyde is principal (C1): $\mathrm{\overset{4}{C}H_{3}{-}\overset{3}{C}H(OH){-}\overset{2}{C}H_{2}{-}\overset{1}{C}HO}$: 3-hydroxybutanal; OH at 3.
5 Ester is principal: acid part $\mathrm{CH_{3}COCH_{2}COO{-}}$ (four carbons, keto group at C3) and methyl on O: methyl 3-oxobutanoate.
6 –COOH outranks –CN: 3-cyanopropanoic acid. –OH outranks $\mathrm{{-}NH_{2}}$: 2-aminoethan-1-ol (2-aminoethanol).
7 1-Bromo-3-chlorobenzene (b before c gets C1). –CHO outranks –OH: 2-hydroxybenzaldehyde (salicylaldehyde).
8 (a) $\mathrm{(CH_{3})_{3}C{-}CH(C_{2}H_{5}){-}CH_{2}CH_{3}}$; (b) $\mathrm{CH_{3}{-}CH{=}CH{-}C{\equiv}C{-}CH_{3}}$; (c) $\mathrm{CH_{3}CH_{2}CH(CH_{3})COOH}$; (d) $\mathrm{CH_{3}CH_{2}N(CH_{3})_{2}}$.
9 $\mathrm{CH_{3}{-}CH(C_{2}H_{5}){-}CH_{2}{-}CH_{3}}$: the longest chain runs into the ethyl group, five carbons with a methyl at C3: 3-methylpentane.
🎯 Exam corner JEE Main · MCQJEE Main · Numerical

E1. JEE Main · MCQ The IUPAC name of $\mathrm{HOOC{-}CH_{2}{-}CH(OH){-}CH_{2}{-}CHO}$ is (A) 5-formyl-3-hydroxypentanoic acid (B) 3-hydroxy-5-oxopentanoic acid (C) 3-hydroxy-1-oxopentanoic acid (D) 1-carboxy-2-hydroxybutanal

Principal group –COOH outranks –CHO and –OH, so the name ends in -oic acid and the COOH carbon is C1.
Chain Five carbons from COOH to CHO; the CHO carbon is C5 and, being inside the parent chain, is named oxo (not formyl); OH on C3.
Answer (B) 3-hydroxy-5-oxopentanoic acid. (A) names the CHO as "formyl" although its carbon is already C5 of the parent chain; (C) puts the oxo on C1, which is the acid carbon; (D) makes the junior group the parent.

E2. JEE Main · Numerical Find the total number of σ bonds in hexa-1,5-dien-3-yne, $\mathrm{CH_{2}{=}CH{-}C{\equiv}C{-}CH{=}CH_{2}}$. Give the answer to the nearest integer.

Count Formula $\mathrm{C_{6}H_{6}}$. C–C linkages: 5 (each contains exactly one σ); C–H bonds: 6. σ $=11$. (π bonds: $1+2+1=4$.)
Answer $11$.
⏱ Shortcut 12 atoms, no ring: σ $=12-1=11$.

E3. JEE Main · MCQ The hybridisation of C1, C2, C3 and C4 in buta-1,2-diene, $\mathrm{CH_{2}{=}C{=}CH{-}CH_{3}}$, is respectively (A) $sp^{2},sp^{2},sp^{2},sp^{3}$ (B) $sp,sp^{2},sp,sp^{3}$ (C) $sp^{2},sp^{2},sp,sp^{3}$ (D) $sp^{2},sp,sp^{2},sp^{3}$

π count C1: one π → $sp^{2}$. C2: two π (two double bonds) → $sp$. C3: one π → $sp^{2}$. C4: none → $sp^{3}$.
Answer (D).
⏱ Shortcut The middle carbon of any C=C=C unit is $sp$; its two neighbours are $sp^{2}$.

E4. JEE Main · Numerical Caffeine has the molecular formula $\mathrm{C_{8}H_{10}N_{4}O_{2}}$. Find its degree of unsaturation (rings + π bonds). Give the answer to the nearest integer.

Formula DoU $=\dfrac{2(8)+2+4-10}{2}=\dfrac{12}{2}=6$ (oxygen ignored, each N adds 1).
Check Caffeine has two fused rings, two C=O, one C=C and one C=N: $2+4=6$ ✓.
Answer $6$.

E5. JEE Main · MCQ The correct IUPAC name of the benzene derivative carrying –OH and –CHO on adjacent ring carbons is (A) 2-formylphenol (B) 6-hydroxybenzaldehyde (C) 2-hydroxybenzaldehyde (D) 1-formyl-2-hydroxybenzene

Seniority –CHO outranks –OH, so the parent is benzaldehyde and the CHO-bearing carbon is C1; –OH becomes the prefix hydroxy.
Locant Going round towards the OH gives 2, the other way 6: lowest is 2.
Answer (C) 2-hydroxybenzaldehyde (salicylaldehyde).

E6. JEE Main · Numerical How many primary (1°) hydrogen atoms are present in 3-ethyl-2,2,4-trimethylpentane? Give the answer to the nearest integer.

Structure $\mathrm{CH_{3}{-}C(CH_{3})_{2}{-}CH(CH_{2}CH_{3}){-}CH(CH_{3}){-}CH_{3}}$, $\mathrm{C_{10}H_{22}}$.
CH₃ groups C1, two on C2, the ethyl's $\mathrm{CH_{3}}$, the methyl on C4 and C5: six $\mathrm{CH_{3}}$ groups, each a 1° carbon, $6\times3=18$ H.
Answer $18$.
⏱ Shortcut In an alkane every 1° H is on a $\mathrm{CH_{3}}$: count the methyl groups (chain ends + branches ending in $\mathrm{CH_{3}}$) and multiply by 3. Check: total H $22=18+2\,(\mathrm{CH_{2}})+2\,(\text{two CH})$ ✓.
🔬 Research–Teaching NexusResearch-tutored · optional, about 45 minutes

Research question. How reliably do the chemical names printed on everyday products — medicines, cosmetics, food labels — lead back to a single structure?

Why it matters. Regulators in India, the European Union and the United States require ingredient lists on medicines and cosmetics, and poison-control centres, pharmacists and customs officers depend on them. A trivial or trade name (paracetamol, acetaminophen, "vitamin E") can hide several different compounds or salts; a correct systematic name cannot. Mislabelled chemicals have caused real dosing errors, which is why databases attach a unique identifier to every structure.

What to do.

  1. Collect ten ingredient names from medicine strips, toothpaste, sunscreen or shampoo packaging at home (e.g. sodium lauryl sulphate, menthol, benzoic acid, propylparaben, salicylic acid).
  2. Classify each name as trivial, semi-systematic or IUPAC.
  3. Look each up in a free public chemical database and record its structure, molecular formula and IUPAC name.
  4. For each compound draw the bond-line formula, list its functional groups and compute its degree of unsaturation from the formula; check that it matches your drawing.
  5. Note any name on a label that could correspond to more than one structure, or that differs between two labels for the same ingredient.

Tools: Product labels, a free online chemical database or a free structure-drawing app, a notebook or spreadsheet.

Hand in: A table (label name · type of name · IUPAC name · formula · functional groups · DoU) and one paragraph on which names were ambiguous and why.

Going further. Find two medicines sold under different brand names that contain the same active compound, and one pair of ingredients whose names differ by only a locant (e.g. 2- and 4-hydroxybenzoic acid derivatives). How large is the difference in their properties?

Instructor note: students typically find that cosmetic labels use semi-systematic "INCI" names (e.g. methylparaben = methyl 4-hydroxybenzoate) and that "lauryl sulphate" products are mixtures of chain lengths. Insist that every DoU be computed from the formula before looking at the drawn structure — the mismatch cases teach the most.

🧪 Self-check quiz

0/5 correct

Q1. The C–H bond with the greatest percentage s character on carbon is found in

Q2. Which compound is heterocyclic and aromatic?

Q3. Two consecutive members of a homologous series differ in molecular mass by

Q4. The IUPAC name of $\mathrm{(CH_{3})_{2}CH{-}CH_{2}{-}OH}$ is

Q5. The number of π bonds in $\mathrm{HC{\equiv}C{-}CH{=}CH{-}C{\equiv}N}$ is