Chapter 20 · Introduction

Chapter 20 — Principles Related to Practical Chemistry

The bench chemistry behind JEE Main: test-tube reactions that reveal elements and functional groups, the preparation of six classic compounds, titrations that turn a colour change into a concentration, the group scheme that identifies an unknown salt, and four physical-chemistry experiments — calorimetry, sols and an iodine clock.

A water-testing kit, a blood-glucose strip and the laboratory that certifies the iron content of a fortified flour all do what this chapter teaches. A pharmacist checks a batch of tablets by titration; a jeweller's acid test and a forensic spot test are qualitative analysis; a food laboratory measures the energy in a sample with a calorimeter. In a school or college laboratory the same ideas appear on a smaller scale: a drop of neutral iron(III) chloride turns violet with a phenol, a silver mirror forms on the wall of a warm test tube, the pink of permanganate lingers for thirty seconds and the titration is over, a black precipitate in acid tells you the salt contains copper, and a flask of colourless liquid turns suddenly blue-black after exactly forty seconds.

JEE Main asks about these experiments directly — in "which reagent distinguishes", "what is observed", "why is this precaution taken" and titration or calorimetry calculations — so the chapter treats each one as chemistry, not as a recipe. Section 20.1 starts with the detection of N, S and halogens in the sodium fusion extract and the tests for the hydroxyl, carbonyl, carboxyl and amino groups, then explains the preparation of Mohr's salt, potash alum, acetanilide, p-nitroacetanilide, aniline yellow and iodoform. Section 20.2 covers titrimetric analysis — standard solutions, acid–base indicators and the self-indicating permanganate titrations of oxalic acid and Mohr's salt — and qualitative salt analysis: the anion tests and the cation groups, explained by solubility products and the common-ion effect. Section 20.3 works through the enthalpy of solution of copper(II) sulphate, the enthalpy of neutralisation of a strong acid by a strong base, the preparation of lyophilic and lyophobic sols, and the kinetics of the iodide–hydrogen peroxide reaction followed by an iodine clock.

Sodium fusion: N, S, X→–OH, C=O, –COOH, –NH₂ tests→Six preparations→Standard solutions & indicators→$\mathrm{KMnO_{4}}$ titrations→Anion tests→Cation groups 0–VI→$q=(m+W)\,c\,\Delta T$→Lyophilic & lyophobic sols→Iodine clock
🎯 By the end of this chapter you can…
  • detect nitrogen, sulphur and halogens in an organic compound from the tests on its sodium fusion extract, and explain each colour or precipitate;
  • identify alcoholic and phenolic –OH, aldehydes and ketones, carboxylic acids and primary amino groups with the standard test-tube reactions, and plan the shortest set of tests for an unknown;
  • explain the principle, the key precautions and the yield calculation of the preparations of Mohr's salt, potash alum, acetanilide, p-nitroacetanilide, aniline yellow and iodoform;
  • prepare a standard solution, choose the right indicator for an acid–base titration, and solve titration problems with $\dfrac{M_{A}V_{A}}{a}=\dfrac{M_{B}V_{B}}{b}$;
  • explain why $\mathrm{KMnO_{4}}$ is its own indicator, why the titration is done in dilute sulphuric acid and why oxalic acid is warmed, and calculate the results of oxalic acid and Mohr's salt titrations;
  • identify the anions and cations of the JEE Main list from their preliminary, group and confirmatory tests, and explain the group scheme with $K_{sp}$ and the common-ion effect;
  • calculate enthalpies of solution and neutralisation from calorimeter readings, including the water equivalent and the limiting reagent;
  • prepare and distinguish lyophilic and lyophobic sols, and find rates and orders of the iodide–hydrogen peroxide reaction from clock times;
  • solve JEE Main MCQ and numerical-answer problems on practical chemistry.

$20.0\ \mathrm{mL}$ of $0.100\ \mathrm{M}$ ethanoic acid is titrated with $0.100\ \mathrm{M}$ NaOH, using methyl orange as the indicator. When does the methyl orange change colour?

Choose ethanoic acid and methyl orange: the readouts show that the pH passes through the range $3.1$–$4.4$ between $0.29$ and $6.26\ \mathrm{mL}$, while the equivalence point is at $20.00\ \mathrm{mL}$, pH $8.72$. Ethanoic acid is weak, so the solution at equivalence (sodium ethanoate) is basic and the pH rises slowly through the acid region as a buffer forms. Switch to phenolphthalein: its range $8.3$–$10.0$ is crossed between $20.00$ and $20.04\ \mathrm{mL}$ — on the steep jump, so it marks the end point correctly (Section 20.2).
Teaser — Choosing the Indicator

The flask holds $20.0\ \mathrm{mL}$ of a $0.100\ \mathrm{M}$ acid or base; the burette adds $0.100\ \mathrm{M}$ NaOH (to the acids) or HCl (to ammonia), so the equivalence point is at $20.00\ \mathrm{mL}$. The curve is the pH calculated exactly at every volume ($\mathrm{p}K_{a}$ of ethanoic acid $4.74$, $\mathrm{p}K_{b}$ of ammonia $4.74$, 298 K); the shaded band is the colour-change range of the indicator. Drag the volume or press Play to titrate, and watch the flask.

10.0 mL
pH in the flask—
indicator changes over—
equivalence point—

Sections in this chapter

🎯 Chapter mixed test JEE Main · MCQJEE Main · Numerical

Eight problems drawn from all three sections and shuffled, as in the real paper; several need two sections at once. Answer each one and press Submit (NTA marking: $+4$ correct, $-1$ wrong, $0$ unanswered), or press ⏱ Take as a timed test for the real-exam experience: $8$ questions at the JEE Main pace of $2.4$ minutes each, with the NTA question palette. For every observation ask what species causes it; for every titration, write the mole ratio before you touch the numbers.

E1. JEE Main · MCQ A compound gives a coloured complex with neutral iron(III) chloride solution and a silver mirror when warmed with Tollens' reagent. The compound is (A) benzaldehyde (B) phenol (C) 4-hydroxybenzaldehyde (D) phenylmethanol

Two tests, two groups Neutral $\mathrm{FeCl_{3}}$ gives a coloured iron(III) phenoxide complex only with a phenolic –OH; Tollens' reagent is reduced only by an aldehyde (Section 20.1).
Check Benzaldehyde: mirror but no phenol. Phenol: colour but no aldehyde. Phenylmethanol is an alcohol: neither. 4-Hydroxybenzaldehyde, $\mathrm{HO{-}C_{6}H_{4}{-}CHO}$, has both groups.
Answer (C).
⏱ Shortcut Each positive test proves one functional group; a compound positive in two unrelated tests must carry both groups.

E2. JEE Main · Numerical $20.0\ \mathrm{mL}$ of an oxalic acid solution needs $16.0\ \mathrm{mL}$ of $0.100\ \mathrm{M}$ NaOH for neutralisation, with phenolphthalein as indicator. What volume (in mL) of $0.0200\ \mathrm{M}$ $\mathrm{KMnO_{4}}$ would $20.0\ \mathrm{mL}$ of the same oxalic acid solution need in hot dilute sulphuric acid? Give the answer to the nearest integer.

Acid–base Oxalic acid is diprotic: $\mathrm{H_{2}C_{2}O_{4}(aq)+2NaOH(aq)\rightarrow Na_{2}C_{2}O_{4}(aq)+2H_{2}O(l)}$. $n(\mathrm{NaOH})=16.0\times0.100=1.60\ \mathrm{mmol}$, so $n(\mathrm{H_{2}C_{2}O_{4}})=0.800\ \mathrm{mmol}$ (Section 20.2).
Redox $\mathrm{2MnO_{4}^{-}(aq)+5C_{2}O_{4}^{2-}(aq)+16H^{+}(aq)}$ $\mathrm{\rightarrow2Mn^{2+}(aq)+10CO_{2}(g)+8H_{2}O(l)}$, so $n(\mathrm{MnO_{4}^{-}})=\tfrac25\times0.800=0.320\ \mathrm{mmol}$, and $V=\dfrac{0.320}{0.0200}$.
Answer $16.0\ \mathrm{mL}$, i.e. $16$.
⏱ Shortcut Equivalents: oxalic acid gives 2 $\mathrm{H^{+}}$ and 2 electrons per molecule, permanganate takes 5 electrons, NaOH takes 1 $\mathrm{H^{+}}$. So $16.0\times0.100\times1=V\times0.0200\times5$ gives $V=16.0$ at once.

E3. JEE Main · MCQ Three iodine-clock runs of the iodide–hydrogen peroxide reaction (acid in excess, same thiosulphate and starch, same total volume and temperature) gave: run 1, $[\mathrm{I^{-}}]_{0}=0.040\ \mathrm{M}$, $[\mathrm{H_{2}O_{2}}]_{0}=0.020\ \mathrm{M}$, $60\ \mathrm{s}$; run 2, $[\mathrm{I^{-}}]_{0}=0.080\ \mathrm{M}$, $[\mathrm{H_{2}O_{2}}]_{0}=0.020\ \mathrm{M}$, $30\ \mathrm{s}$; run 3, $[\mathrm{I^{-}}]_{0}=0.040\ \mathrm{M}$, $[\mathrm{H_{2}O_{2}}]_{0}=0.010\ \mathrm{M}$, $120\ \mathrm{s}$. The rate law is (A) rate $=k[\mathrm{H_{2}O_{2}}][\mathrm{I^{-}}]^{2}$ (B) rate $=k[\mathrm{H_{2}O_{2}}]^{2}[\mathrm{I^{-}}]$ (C) rate $=k[\mathrm{I^{-}}]$ (D) rate $=k[\mathrm{H_{2}O_{2}}][\mathrm{I^{-}}]$

Rate from a clock time The colour appears when a fixed amount of iodine has formed, so the initial rate is proportional to $\tfrac1t$ (Section 20.3).
Orders Runs 1→2: $[\mathrm{I^{-}}]$ doubled, time halved, rate doubled — first order in $\mathrm{I^{-}}$. Runs 1→3: $[\mathrm{H_{2}O_{2}}]$ halved, time doubled, rate halved — first order in $\mathrm{H_{2}O_{2}}$ (the initial-rates method of Section 8.1).
Answer (D).
⏱ Shortcut Order $=\log_{2}\dfrac{t_\text{old}}{t_\text{new}}$ when one concentration is doubled. Reading the time instead of the rate would reverse every conclusion.

E4. JEE Main · Numerical The sodium fusion extract of each of the following compounds is boiled with iron(II) sulphate and acidified, and a little iron(III) chloride is added: aniline, acetanilide, urea, hydrazine, nitrobenzene, ammonium chloride, phenylhydrazine, hydroxylamine. In how many cases is a Prussian blue colour obtained? Give the answer to the nearest integer.

Principle Fusion with sodium turns combined nitrogen into cyanide ion, $\mathrm{Na+C+N\xrightarrow{\Delta}NaCN}$, which gives hexacyanidoferrate(II) and then Prussian blue (Section 20.1). The compound must contain both carbon and nitrogen.
Sort Carbon and nitrogen: aniline, acetanilide, urea, nitrobenzene, phenylhydrazine. No carbon: hydrazine $\mathrm{N_{2}H_{4}}$, ammonium chloride, hydroxylamine $\mathrm{NH_{2}OH}$ — no cyanide can form.
Answer $5$.
⏱ Shortcut The test detects the C–N combination, not nitrogen alone. Inorganic and carbon-free nitrogen compounds always fail it.

E5. JEE Main · MCQ An aqueous solution of a white salt gives no precipitate with dilute HCl, none with $\mathrm{H_{2}S}$ in dilute HCl, and none with $\mathrm{NH_{4}OH}$ in the presence of $\mathrm{NH_{4}Cl}$; $\mathrm{H_{2}S}$ passed into the ammoniacal solution gives a white precipitate. A fresh portion of the solution gives with $\mathrm{BaCl_{2}}$ a white precipitate insoluble in dilute HCl. The salt is (A) $\mathrm{ZnSO_{4}}$ (B) $\mathrm{ZnCl_{2}}$ (C) $\mathrm{Al_{2}(SO_{4})_{3}}$ (D) $\mathrm{MgSO_{4}}$

Cation Nothing in groups I, II or III; a sulphide in ammoniacal solution is group IV. A white sulphide is ZnS (NiS is black) — the high $[\mathrm{S^{2-}}]$ of alkaline solution exceeds its larger $K_{sp}$ (Section 20.2). $\mathrm{Al^{3+}}$ would have stopped at group III; $\mathrm{Mg^{2+}}$ would pass group IV.
Anion A white precipitate with $\mathrm{BaCl_{2}}$ that does not dissolve in acid is $\mathrm{BaSO_{4}}$: sulphate.
Answer (A) $\mathrm{ZnSO_{4}}$.
⏱ Shortcut The first group that precipitates names the cation's group; the colour then picks the ion — white in group IV can only be zinc.

E6. JEE Main · Numerical $100\ \mathrm{mL}$ of $0.20\ \mathrm{M}$ $\mathrm{H_{2}SO_{4}}$ and $150\ \mathrm{mL}$ of $0.20\ \mathrm{M}$ NaOH, both at the same temperature, are mixed in a calorimeter of water equivalent $30\ \mathrm{g}$. The corrected temperature rise is $1.45\ \mathrm{K}$. Taking the density of all solutions as $1.0\ \mathrm{g\,mL^{-1}}$ and their specific heat as $4.2\ \mathrm{J\,g^{-1}\,K^{-1}}$, find the magnitude of the enthalpy of neutralisation in $\mathrm{kJ\,mol^{-1}}$. Give the answer to the nearest integer.

Limiting reagent $n(\mathrm{H^{+}})=2\times0.100\times0.20=0.040\ \mathrm{mol}$; $n(\mathrm{OH^{-}})=0.150\times0.20=0.030\ \mathrm{mol}$. Only $0.030\ \mathrm{mol}$ of water forms (Section 20.3).
Heat $q=(m+W)\,c\,\Delta T=(250+30)(4.2)(1.45)=1705\ \mathrm{J}$, so $|\Delta_\text{neut}H|=\dfrac{1.705\ \mathrm{kJ}}{0.030\ \mathrm{mol}}=56.8\ \mathrm{kJ\,mol^{-1}}$.
Answer $57$ ($\Delta_\text{neut}H\approx-57\ \mathrm{kJ\,mol^{-1}}$, the strong acid–strong base value).
⏱ Shortcut Divide by the moles of water formed, not by the moles of acid ($0.020$) or of $\mathrm{H^{+}}$ ($0.040$), and do not forget the water equivalent — without it you get $51$.

E7. JEE Main · MCQ Which reagent distinguishes sodium nitrite from sodium nitrate? (A) iron(II) sulphate solution with concentrated $\mathrm{H_{2}SO_{4}}$ poured down the side of the tube (B) dilute $\mathrm{H_{2}SO_{4}}$ in the cold (C) barium chloride solution (D) lime water

Anion groups Nitrite belongs to the dilute $\mathrm{H_{2}SO_{4}}$ group: in the cold it gives brown fumes of $\mathrm{NO_{2}}$ (from NO and air). Nitrate needs concentrated acid and does not react with the dilute acid (Section 20.2).
Distractors (A) gives a brown ring with both ions, since nitrite also produces NO; neither ion is precipitated by $\mathrm{BaCl_{2}}$; lime water does not react with either.
Answer (B).
⏱ Shortcut The dilute-acid test is always done first: $\mathrm{CO_{3}^{2-}}$, $\mathrm{S^{2-}}$ and $\mathrm{NO_{2}^{-}}$ show themselves there; $\mathrm{NO_{3}^{-}}$ and the halides need concentrated acid.

E8. JEE Main · Numerical Mohr's salt is prepared from $5.56\ \mathrm{g}$ of $\mathrm{FeSO_{4}\cdot7H_{2}O}$ and an equimolar amount of ammonium sulphate. All the dried crystals are dissolved in dilute $\mathrm{H_{2}SO_{4}}$ and made up to $250\ \mathrm{mL}$; $25.0\ \mathrm{mL}$ of this solution needs $32.0\ \mathrm{mL}$ of $0.0100\ \mathrm{M}$ $\mathrm{KMnO_{4}}$. Find the percentage yield of the preparation ($\mathrm{H}=1$, $\mathrm{O}=16$, $\mathrm{S}=32$, $\mathrm{Fe}=56$). Give the answer to the nearest integer.

Theoretical $M(\mathrm{FeSO_{4}\cdot7H_{2}O})=56+32+64+126=278\ \mathrm{g\,mol^{-1}}$, so $n=\dfrac{5.56}{278}=0.0200\ \mathrm{mol}$; one mole gives one mole of Mohr's salt (Section 20.1): $0.0200\ \mathrm{mol}$ expected.
Titration $\mathrm{MnO_{4}^{-}(aq)+5Fe^{2+}(aq)+8H^{+}(aq)}$ $\mathrm{\rightarrow Mn^{2+}(aq)+5Fe^{3+}(aq)+4H_{2}O(l)}$ (Section 20.2): $n(\mathrm{MnO_{4}^{-}})=32.0\times0.0100=0.320\ \mathrm{mmol}$, so $n(\mathrm{Fe^{2+}})=1.60\ \mathrm{mmol}$ in $25.0\ \mathrm{mL}$ and $16.0\ \mathrm{mmol}$ in all.
Answer Yield $=\dfrac{0.0160}{0.0200}\times100=80\ \%$, i.e. $80$.
⏱ Shortcut Every iron atom is carried through unchanged, so you never need the molar mass of Mohr's salt ($392$) — compare moles of iron directly. Using the ratio $1:1$ instead of $1:5$ gives $16$.
✅ Before you start
The sodium fusion (Lassaigne) tests were introduced in Section 13.2. The functional-group tests and the organic preparations use the chemistry of alcohols, phenols and carbonyl compounds (Sections 17.1–17.4), amines and diazonium salts (Section 18.1, Section 18.2) and electrophilic substitution (Section 15.4). Titrations need molarity (Section 5.1), stoichiometry (Section 1.3), balanced redox equations (Section 7.1) and the chemistry of permanganate (Section 11.2); indicators and salt analysis rest on pH, $K_{sp}$ and the common-ion effect (Section 6.3, Section 6.4) and on complex ions (Section 12.1). The physical experiments use enthalpy changes (Section 4.2) and rate laws and initial rates (Section 8.1).