Chapter 18 · Organic Compounds Containing Nitrogen

18.1 Amines

Replace the hydrogens of ammonia by carbon groups and you get the amines: pyramidal nitrogen bases whose lone pair decides everything — how strongly they take a proton, how they are made, how they react and how a single reagent tells a 1°, a 2° and a 3° amine apart.

The smell of fish that is no longer fresh is trimethylamine. The "fight-or-flight" hormone adrenaline, the brain messenger dopamine, the antihistamines in an allergy tablet, the local anaesthetic a dentist injects and the nicotine in tobacco all carry an amino nitrogen. So do the dyes that first turned coal tar into a chemical industry: in 1856 an eighteen-year-old chemist trying to make quinine from aniline obtained instead a purple dye, mauveine, and within a few decades aniline-based colours were being exported all over the world. Paracetamol is made from 4-aminophenol, and nylon-6,6 from hexane-1,6-diamine. All these compounds are amines — organic derivatives of ammonia.

Everything about an amine comes back to one feature: a nitrogen atom with three bonds and one lone pair. The lone pair makes amines bases and nucleophiles; the number of hydrogens left on nitrogen decides how they react with acid chlorides, sulphonyl chlorides and nitrous acid. In this section we classify and name amines, build the five general routes to them, explain their physical properties and — going well beyond the brief treatment of basicity in Section 14.3 — work out their base strength quantitatively with $K_{b}$ and $\mathrm{p}K_{b}$, in the gas phase and in water, for alkyl and aryl amines. We finish with the reactions that identify 1°, 2° and 3° amines (carbylamine, nitrous acid, Hinsberg test) and with electrophilic substitution in aniline. You will need IUPAC naming from Section 14.1, the inductive and resonance effects of Section 14.3, $K_{a}$, $K_{b}$ and pH from Section 6.3, electrophilic substitution of benzene from Section 15.4 and the $\mathrm{S_{N}2}$ reaction from Section 16.2.

Structure, classification and naming

An amine is what you get when one, two or all three hydrogen atoms of ammonia are replaced by alkyl or aryl groups. The nitrogen keeps its lone pair, so its four electron pairs (three bonding, one non-bonding) point to the corners of a tetrahedron: nitrogen is $sp^{3}$ hybridised and the molecule is a trigonal pyramid, like ammonia. The lone pair repels the bonding pairs a little more than they repel one another, so the C–N–C angle in trimethylamine is about $108^\circ$, just under the tetrahedral $109.5^\circ$.

📘 Definition 18.1 — Amines and their classes

An amine is a compound derived from ammonia, $\mathrm{NH_{3}}$, by replacing one or more hydrogen atoms with alkyl or aryl groups. It is

  • primary (1°), $\mathrm{R{-}NH_{2}}$, if one carbon group is bonded to nitrogen (the $\mathrm{{-}NH_{2}}$ group is the amino group);
  • secondary (2°), $\mathrm{R_{2}NH}$, if two carbon groups are bonded to nitrogen (the $\mathrm{{>}NH}$ group is the imino group);
  • tertiary (3°), $\mathrm{R_{3}N}$, if three carbon groups are bonded to nitrogen.

If nitrogen carries a fourth carbon group it has no lone pair and bears a positive charge: $\mathrm{R_{4}N^{+}X^{-}}$ is a quaternary ammonium salt, not an amine.

An amine is aliphatic (an alkylamine) when nitrogen is bonded only to $sp^{3}$ carbon atoms, and aromatic (an arylamine) when nitrogen is bonded directly to a benzene-ring carbon. Benzylamine, $\mathrm{C_{6}H_{5}CH_{2}NH_{2}}$, has the ring one carbon away from N and is therefore an aliphatic amine.

Notice that the class of an amine counts the carbons on nitrogen, whereas the class of an alcohol counts the carbons on the carbinol carbon. So 2-methylpropan-2-amine, $\mathrm{(CH_{3})_{3}C{-}NH_{2}}$, is a primary amine even though its alcohol analogue, 2-methylpropan-2-ol, is tertiary.

Aniline is different. In aniline the lone pair on nitrogen overlaps with the π system of the ring. To make that overlap good the nitrogen flattens towards planarity (the H–N–H plane is tilted only about $40^\circ$ from the ring plane), and the C–N bond, $140\ \mathrm{pm}$, is shorter than the $147\ \mathrm{pm}$ C–N bond of methanamine — it has some double-bond character. That delocalisation, drawn with resonance structures in the third subsection, makes aniline a much weaker base than any alkylamine.

📐 Rule 18.1 — IUPAC names of amines
  1. Primary amines: take the longest chain containing the carbon bonded to N, replace the final -e of the alkane by -amine, and give that carbon the lowest possible locant: $\mathrm{CH_{3}CH_{2}NH_{2}}$ ethanamine, $\mathrm{CH_{3}CH(NH_{2})CH_{3}}$ propan-2-amine, $\mathrm{(CH_{3})_{3}CNH_{2}}$ 2-methylpropan-2-amine.
  2. Secondary and tertiary amines: the largest carbon group gives the parent alkanamine; the other groups on nitrogen are prefixes with the locant N: $\mathrm{CH_{3}NHCH_{2}CH_{3}}$ N-methylethanamine, $\mathrm{(CH_{3})_{2}NCH_{2}CH_{3}}$ N,N-dimethylethanamine, $\mathrm{CH_{3}N(C_{2}H_{5})CH_{2}CH_{2}CH_{3}}$ N-ethyl-N-methylpropan-1-amine (prefixes alphabetical).
  3. Diamines keep the final -e: $\mathrm{H_{2}NCH_{2}CH_{2}NH_{2}}$ ethane-1,2-diamine, $\mathrm{H_{2}N(CH_{2})_{6}NH_{2}}$ hexane-1,6-diamine.
  4. Arylamines: $\mathrm{C_{6}H_{5}NH_{2}}$ is benzenamine, accepted by IUPAC under its common name aniline; ring substituents are numbered from the carbon bearing N (C1): 4-methylaniline (4-methylbenzenamine, p-toluidine), 2-bromoaniline; groups on nitrogen again take the locant N: N-methylaniline, N,N-dimethylaniline.

Common names put the alkyl groups in alphabetical order before "amine", as one word: methylamine, dimethylamine, ethyldimethylamine, isopropylamine, tert-butylamine.

FormulaIUPAC nameCommon nameClass
$\mathrm{CH_{3}NH_{2}}$methanaminemethylamine1° aliphatic
$\mathrm{CH_{3}CH_{2}CH_{2}NH_{2}}$propan-1-aminen-propylamine1° aliphatic
$\mathrm{(CH_{3})_{2}NH}$N-methylmethanaminedimethylamine2° aliphatic
$\mathrm{(CH_{3})_{3}N}$N,N-dimethylmethanaminetrimethylamine3° aliphatic
$\mathrm{C_{6}H_{5}CH_{2}NH_{2}}$phenylmethanaminebenzylamine1° aliphatic
$\mathrm{C_{6}H_{5}NH_{2}}$benzenamineaniline1° aromatic
$\mathrm{C_{6}H_{5}NHCH_{3}}$N-methylbenzenamineN-methylaniline2° aromatic
$\mathrm{C_{6}H_{5}N(CH_{3})_{2}}$N,N-dimethylbenzenamineN,N-dimethylaniline3° aromatic

Isomerism. Amines show chain isomerism, position isomerism (propan-1-amine and propan-2-amine) and metamerism — different groups on the same functional atom, such as N-methylpropan-1-amine and N-ethylethanamine. Isomeric 1°, 2° and 3° amines of one formula are functional isomers of one another. Counting them is a favourite JEE numerical: list the carbon skeletons and put nitrogen in every distinct position, then split the carbons between the groups on N.

✏️ Example 1 — The amines of formula C₄H₁₁N
(a) Write all the structurally isomeric amines of formula $\mathrm{C_{4}H_{11}N}$, name them and classify each as 1°, 2° or 3°. (b) How many are there in all? (c) Which of them is chiral?
How many structural isomers do you expect?
1° One butyl group on $\mathrm{NH_{2}}$; there are four $\mathrm{C_{4}H_{9}}$ groups: butan-1-amine $\mathrm{CH_{3}CH_{2}CH_{2}CH_{2}NH_{2}}$, butan-2-amine $\mathrm{CH_{3}CH_{2}CH(NH_{2})CH_{3}}$, 2-methylpropan-1-amine $\mathrm{(CH_{3})_{2}CHCH_{2}NH_{2}}$, 2-methylpropan-2-amine $\mathrm{(CH_{3})_{3}CNH_{2}}$. Four.
2° Two groups on NH using 4 carbons: $1+3$ gives N-methylpropan-1-amine and N-methylpropan-2-amine; $2+2$ gives N-ethylethanamine (diethylamine). Three.
3° Three groups using 4 carbons: only $1+1+2$, N,N-dimethylethanamine $\mathrm{(CH_{3})_{2}NC_{2}H_{5}}$. One.
(b), (c) $4+3+1=8$ amines. Only butan-2-amine has a carbon with four different groups ($\mathrm{H}$, $\mathrm{NH_{2}}$, $\mathrm{CH_{3}}$, $\mathrm{C_{2}H_{5}}$), so it alone exists as a pair of enantiomers (giving 9 isomers if stereoisomers are counted).
Check Degree of unsaturation of $\mathrm{C_{4}H_{11}N}$: $\tfrac12(2\times4+2+1-11)=0$, so no rings or π bonds — every isomer is a saturated open-chain amine ✓. (Nitrogen inversion interconverts the two pyramids of a chiral $\mathrm{R_{3}N}$ millions of times a second, so a stereocentre on nitrogen does not give separable isomers.)

Which of the following is a secondary amine?

General methods of preparation

Five routes cover the amines of JEE Main. Two start from compounds that already contain nitrogen in a higher oxidation state and reduce it (nitro compounds, nitriles, amides); two build the C–N bond by substitution on a haloalkane (ammonolysis, Gabriel synthesis); and one, the Hoffmann degradation, removes a carbon atom. For each route keep track of two things: which class of amine it gives and how the number of carbon atoms changes.

1. Reduction of nitro compounds. Nitro compounds are reduced to primary amines by hydrogen over a finely divided metal catalyst (Ni, Pd or Pt), or by a metal and acid — tin or iron with hydrochloric acid. This is the standard route to aromatic amines, because nitroarenes are made so easily by nitration (Section 15.4):

$$\mathrm{C_{6}H_{5}NO_{2}+3H_{2}\xrightarrow{Ni\ \text{or}\ Pd}C_{6}H_{5}NH_{2}+2H_{2}O}$$ $$\mathrm{C_{6}H_{5}NO_{2}+6[H]\xrightarrow{Sn\ \text{or}\ Fe,\ HCl}C_{6}H_{5}NH_{2}+2H_{2}O}$$

Each $\mathrm{{-}NO_{2}}$ needs six electrons (six hydrogen atoms): N goes from oxidation state $+3$ to $-3$. Industry prefers iron scrap and HCl: the iron(II) chloride formed is hydrolysed and gives back hydrochloric acid, so only a small amount of acid is needed to start the reaction. In acid the amine is obtained as its salt ($\mathrm{C_{6}H_{5}NH_{3}^{+}Cl^{-}}$), and aqueous NaOH sets the free amine free.

2. Ammonolysis of haloalkanes. Ammonia is a nucleophile. Heated with a haloalkane in ethanol in a sealed tube at about 373 K, it displaces the halide ion by $\mathrm{S_{N}2}$ (Section 16.2); the process is called ammonolysis:

$$\mathrm{R{-}X+NH_{3}\rightarrow R{-}NH_{3}^{+}X^{-}}$$ $$\mathrm{R{-}NH_{3}^{+}X^{-}+NaOH\rightarrow R{-}NH_{2}+NaX+H_{2}O}$$

The trouble is that the product is itself a nucleophile — a better one than ammonia, thanks to the $+I$ effect of R. It competes for the haloalkane, so the reaction runs on: $\mathrm{RNH_{2}\rightarrow R_{2}NH\rightarrow R_{3}N\rightarrow R_{4}N^{+}X^{-}}$, and a mixture of all four results. A large excess of ammonia makes the 1° amine the main product; a large excess of haloalkane drives the reaction to the quaternary salt. The reactivity order of the halides is $\mathrm{RI\gt RBr\gt RCl}$. Aryl halides do not react under these conditions (their C–X bond has partial double-bond character), so ammonolysis cannot make aniline.

3. Reduction of nitriles. A nitrile is reduced to a primary amine with one extra $\mathrm{CH_{2}}$ group by lithium aluminium hydride, by $\mathrm{H_{2}/Ni}$, or by sodium in ethanol:

$$\mathrm{R{-}C{\equiv}N\xrightarrow{LiAlH_{4}\ \text{or}\ H_{2}/Ni}R{-}CH_{2}NH_{2}}$$

Since nitriles come from haloalkanes and KCN ($\mathrm{RX\rightarrow RCN}$), the two steps together form a step-up route: the amine has one carbon more than the haloalkane.

4. Reduction of amides. Lithium aluminium hydride followed by water reduces the C=O of an amide to $\mathrm{CH_{2}}$:

$$\mathrm{R{-}CO{-}NH_{2}\xrightarrow[(ii)\ H_{2}O]{(i)\ LiAlH_{4}}R{-}CH_{2}{-}NH_{2}}$$

The carbon count does not change. With N-substituted amides the same reaction gives 2° and 3° amines cleanly: $\mathrm{CH_{3}CONHCH_{3}\rightarrow CH_{3}CH_{2}NHCH_{3}}$.

5. Gabriel phthalimide synthesis. The N–H of phthalimide lies between two C=O groups and is acidic enough to be removed by ethanolic KOH. The phthalimide anion is a good nucleophile; it attacks a 1° (or methyl) haloalkane by $\mathrm{S_{N}2}$ to give an N-alkylphthalimide, which has no N–H left and cannot be alkylated again. Hydrolysis with aqueous alkali then releases the amine.

The Gabriel synthesis gives only primary amines, completely free of 2° and 3° amines. It cannot make aromatic amines — aryl halides do not undergo $\mathrm{S_{N}2}$ substitution with the phthalimide anion — and it fails with 3° haloalkanes, which undergo elimination instead.

6. Hoffmann bromamide degradation. A primary amide heated with bromine and aqueous (or ethanolic) sodium hydroxide gives a primary amine with one carbon atom fewer:

$$\begin{aligned}\mathrm{R{-}CONH_{2}+Br_{2}+4NaOH}&\mathrm{\;\rightarrow R{-}NH_{2}+Na_{2}CO_{3}}\\&\mathrm{\;\quad+\,2NaBr+2H_{2}O}\end{aligned}$$

The mechanism explains where the carbon goes. Bromine replaces one N–H hydrogen; hydroxide removes the second; then the group R moves, with its bonding pair, from the carbonyl carbon to nitrogen while bromide leaves. The resulting isocyanate, $\mathrm{O{=}C{=}N{-}R}$, is hydrolysed by the alkali to the amine and carbonate.

Because R simply moves from C to N, aryl groups migrate as well as alkyl groups: benzamide gives aniline. One mole of amide uses one mole of $\mathrm{Br_{2}}$ and four moles of NaOH.

📐 Rule 18.2 — Routes to amines and the carbon count
RouteReagentsClass obtainedCarbon count
reduction of $\mathrm{R{-}NO_{2}}$ / $\mathrm{Ar{-}NO_{2}}$$\mathrm{H_{2}/Ni}$; Sn/HCl; Fe/HCl1° (best route to arylamines)unchanged
ammonolysis of $\mathrm{R{-}X}$$\mathrm{NH_{3}}$ (ethanol, 373 K, sealed tube)mixture 1°, 2°, 3°, $\mathrm{R_{4}N^{+}}$unchanged
reduction of $\mathrm{R{-}CN}$$\mathrm{LiAlH_{4}}$; $\mathrm{H_{2}/Ni}$; Na/ethanol1°, $\mathrm{RCH_{2}NH_{2}}$+1 relative to RX
reduction of $\mathrm{R{-}CONH_{2}}$$\mathrm{LiAlH_{4}}$, then $\mathrm{H_{2}O}$1° (2°, 3° from N-substituted amides)unchanged
Gabriel synthesisphthalimide, KOH; RX; NaOH(aq)pure 1° aliphatic onlyunchanged
Hoffmann bromamide degradation$\mathrm{Br_{2}}$ + 4 NaOH1° (alkyl or aryl)−1

Conditions: ammonolysis and the Gabriel synthesis are $\mathrm{S_{N}2}$ reactions and need 1° (or 2° for ammonolysis) haloalkanes — never aryl halides. The Hoffmann degradation needs a primary amide, $\mathrm{RCONH_{2}}$.

✏️ Example 2 — Stepping the carbon count up and down
Starting from propanamide, $\mathrm{CH_{3}CH_{2}CONH_{2}}$ ($M=73\ \mathrm{g\,mol^{-1}}$): (a) which reagents give ethanamine, and which give propan-1-amine? (b) For the conversion of $7.3\ \mathrm{g}$ of propanamide into ethanamine, find the masses of bromine and of sodium hydroxide needed, and the mass of ethanamine formed at 100% yield ($\mathrm{Br}=80$, $\mathrm{Na}=23$). (c) Suggest a two-step route from bromoethane to propan-1-amine.
Find the mass of NaOH in (b) first:
(a) Ethanamine has two carbons — one fewer than propanamide — so use the Hoffmann degradation: $\mathrm{Br_{2}/NaOH}$. Propan-1-amine keeps all three carbons, so reduce the C=O: $\mathrm{LiAlH_{4}}$ then $\mathrm{H_{2}O}$.
Moles $n(\text{amide})=\dfrac{7.3}{73}=0.10\ \mathrm{mol}$. The balanced equation uses one $\mathrm{Br_{2}}$ and four NaOH per amide: $0.10\ \mathrm{mol\ Br_{2}}$ and $0.40\ \mathrm{mol\ NaOH}$.
(b) $m(\mathrm{Br_{2}})=0.10\times160=16.0\ \mathrm{g}$; $m(\mathrm{NaOH})=0.40\times40=16.0\ \mathrm{g}$; ethanamine $\mathrm{C_{2}H_{7}N}$ ($M=45$): $0.10\times45=4.5\ \mathrm{g}$.
(c) $\mathrm{CH_{3}CH_{2}Br\xrightarrow{KCN}CH_{3}CH_{2}CN}$, then $\mathrm{CH_{3}CH_{2}CN\xrightarrow{LiAlH_{4}}CH_{3}CH_{2}CH_{2}NH_{2}}$ — the cyanide carbon becomes the new $\mathrm{CH_{2}}$ next to N.
Check Atoms in the Hoffmann equation: C, H, N, O, Na and Br all balance (e.g. O: $1+4=3+2$; H: $2+4=2+4$) ✓.
✏️ Example 3 — JEE level: identify an amide from its Hoffmann product
An amide A, $\mathrm{C_{4}H_{9}NO}$, gives B, $\mathrm{C_{3}H_{9}N}$, when warmed with bromine and aqueous NaOH. B gives an offensive smell when heated with chloroform and ethanolic KOH. With sodium nitrite and dilute HCl, B evolves a colourless gas and gives an alcohol C, which is oxidised by acidified dichromate to propanone. (a) Identify A, B and C. (b) What would A give with $\mathrm{LiAlH_{4}}$? (c) What mass of B is formed from $8.7\ \mathrm{g}$ of A at 100% yield?
Clues Br₂/NaOH removing one carbon ⇒ A is a primary amide $\mathrm{RCONH_{2}}$ and B is the 1° amine $\mathrm{RNH_{2}}$. The foul smell (carbylamine test, next subsections) confirms that B is primary; the gas with nitrous acid is $\mathrm{N_{2}}$, and B is aliphatic.
C and B C oxidises to a ketone, propanone, so C is the 2° alcohol propan-2-ol, $\mathrm{(CH_{3})_{2}CHOH}$. Nitrous acid replaces $\mathrm{{-}NH_{2}}$ by $\mathrm{{-}OH}$ on the same carbon, so B is propan-2-amine, $\mathrm{(CH_{3})_{2}CHNH_{2}}$.
(a) A Add back the carbonyl carbon where N was: A is 2-methylpropanamide, $\mathrm{(CH_{3})_{2}CHCONH_{2}}$ ($\mathrm{C_{4}H_{9}NO}$ ✓).
(b), (c) $\mathrm{LiAlH_{4}}$ keeps the carbon: 2-methylpropan-1-amine, $\mathrm{(CH_{3})_{2}CHCH_{2}NH_{2}}$. $M(\mathrm{A})=87$, so $8.7\ \mathrm{g}=0.10\ \mathrm{mol}$ and B ($M=59$) $=5.9\ \mathrm{g}$.
Check Butanamide would give propan-1-amine and then propan-1-ol, which oxidises to propanal/propanoic acid, not to a ketone — so the branched amide is the only fit ✓.

Which method would give pure propan-1-amine, free from secondary and tertiary amines, starting from a three-carbon haloalkane?

Physical properties and basic character

Physical properties. The lower aliphatic amines — methanamine, N-methylmethanamine, N,N-dimethylmethanamine and ethanamine — are gases at room temperature with a fishy, ammonia-like smell; the higher ones are liquids and the largest are solids. Pure aniline is a colourless liquid (b.p. 457 K) that darkens on standing in air as it is slowly oxidised to coloured products.

Amines are bases. The lone pair on nitrogen accepts a proton. Amines turn red litmus blue, react with acids to give salts, and set up an equilibrium with water just as ammonia does:

$$\mathrm{R{-}NH_{2}+H_{2}O\rightleftharpoons R{-}NH_{3}^{+}+OH^{-}}$$ $$\mathrm{R{-}NH_{2}+HCl\rightarrow R{-}NH_{3}^{+}Cl^{-}}\quad(\text{alkylammonium chloride})$$

Amine salts are ionic, water-soluble and insoluble in ether; aqueous NaOH or KOH regenerates the free amine, $\mathrm{RNH_{3}^{+}+OH^{-}\rightarrow RNH_{2}+H_{2}O}$. This is how amines are separated from neutral organic compounds: shake the mixture in ether with dilute HCl, and the amine moves into the water layer as its salt.

📘 Definition 18.2 — Base ionisation constant $K_{b}$ and $\mathrm{p}K_{b}$ of an amine

For an amine B in water, $\mathrm{B+H_{2}O\rightleftharpoons BH^{+}+OH^{-}}$ (Section 6.3),

$$K_{b}=\frac{[\mathrm{BH^{+}}][\mathrm{OH^{-}}]}{[\mathrm{B}]},\qquad \mathrm{p}K_{b}=-\log K_{b}.$$

The larger $K_{b}$ (the smaller $\mathrm{p}K_{b}$), the stronger the base. For the conjugate acid $\mathrm{BH^{+}}$ at 298 K, $K_{a}K_{b}=K_{w}=1.0\times10^{-14}$, so $\mathrm{p}K_{a}(\mathrm{BH^{+}})+\mathrm{p}K_{b}(\mathrm{B})=14.00$: a strong base has a weak conjugate acid. Two bases whose $\mathrm{p}K_{b}$ values differ by $\Delta$ have $K_{b}$ values in the ratio $10^{\Delta}$.

For a weak base at concentration $C$ that is only slightly ionised, $[\mathrm{OH^{-}}]\approx\sqrt{K_{b}C}$, which gives the handy form

$$\mathrm{pOH}=\tfrac12\left(\mathrm{p}K_{b}-\log C\right),\qquad \mathrm{pH}=14-\mathrm{pOH}.$$

Gas phase: only the inductive effect. Alkyl groups release electrons ($+I$), making nitrogen richer in electron density and spreading the positive charge of the cation. With no solvent present, more alkyl groups always mean a stronger base. Gas-phase proton affinities (the energy released when the base takes a proton) show it directly: $\mathrm{NH_{3}}$ 854, $\mathrm{CH_{3}NH_{2}}$ 899, $\mathrm{(CH_{3})_{2}NH}$ 930, $\mathrm{(CH_{3})_{3}N}$ 949 $\mathrm{kJ\,mol^{-1}}$ — the order $3^{\circ}\gt2^{\circ}\gt1^{\circ}\gt\mathrm{NH_{3}}$.

In water: three effects compete. In solution the cation $\mathrm{R_{n}NH_{4-n}^{+}}$ is stabilised by hydrogen bonds to water through its N–H hydrogens. $\mathrm{RNH_{3}^{+}}$ has three such hydrogens, $\mathrm{R_{2}NH_{2}^{+}}$ two, $\mathrm{R_{3}NH^{+}}$ only one, so solvation stabilises the cation of a 1° amine most and that of a 3° amine least — the opposite of the inductive order. Bulky alkyl groups also crowd the nitrogen (steric hindrance), hindering both the approach of the proton and the solvation of the cation. The observed order is a compromise:

SeriesOrder of basicity in water$\mathrm{p}K_{b}$ (298 K)
methyl$\mathrm{(CH_{3})_{2}NH\gt CH_{3}NH_{2}\gt(CH_{3})_{3}N\gt NH_{3}}$$3.27,\ 3.38,\ 4.22,\ 4.74$
ethyl$\mathrm{(C_{2}H_{5})_{2}NH\gt(C_{2}H_{5})_{3}N\gt C_{2}H_{5}NH_{2}\gt NH_{3}}$$3.00,\ 3.25,\ 3.29,\ 4.74$

In both series the 2° amine is strongest — it has two electron-releasing groups and its cation still has two N–H for hydrogen bonding. The 3° amine falls behind: in the methyl series it is even weaker than the 1° amine because its cation is so poorly solvated; ethyl groups push electrons more strongly, so in the ethyl series the 3° amine just overtakes the 1°.

Arylamines are much weaker bases. Aniline ($\mathrm{p}K_{b}=9.38$) is about a million times weaker than methanamine and $10^{4.6}$ times weaker than ammonia. Two reasons:

  1. Resonance. The lone pair is delocalised over the ring (figure below). Protonation would lock the pair in an N–H bond and destroy this extra resonance; the anilinium ion, $\mathrm{C_{6}H_{5}NH_{3}^{+}}$, has only the two Kekulé structures of the ring. So aniline is stabilised more than its cation, and gaining a proton is less favourable.
  2. The $sp^{2}$ carbon. Nitrogen is bonded to an $sp^{2}$ carbon, which is more electronegative than an $sp^{3}$ carbon and withdraws electron density ($-I$).

Compare benzylamine, $\mathrm{C_{6}H_{5}CH_{2}NH_{2}}$: the $\mathrm{CH_{2}}$ group insulates the lone pair from the ring, so it is an ordinary alkylamine ($\mathrm{p}K_{b}\approx4.7$), about $10^{4.7}$ times stronger than aniline. Diphenylamine, with the lone pair shared by two rings, is weaker still, and triphenylamine is practically not basic at all.

Substituents on the ring change the availability of the lone pair:

📐 Rule 18.3 — Basicity of amines
  1. Gas phase (inductive effect only): $3^{\circ}\gt2^{\circ}\gt1^{\circ}\gt\mathrm{NH_{3}}$.
  2. Water ($+I$ effect, solvation of the cation, steric hindrance): methyl series $2^{\circ}\gt1^{\circ}\gt3^{\circ}\gt\mathrm{NH_{3}}$; ethyl series $2^{\circ}\gt3^{\circ}\gt1^{\circ}\gt\mathrm{NH_{3}}$. Every alkylamine is a stronger base than ammonia ($\mathrm{p}K_{b}$ about 3–4.2 against 4.74).
  3. Arylamines are far weaker than ammonia ($\mathrm{p}K_{b}$ of aniline 9.38) because the lone pair is delocalised into the ring. Electron-releasing para groups ($\mathrm{{-}OCH_{3}}$, $\mathrm{{-}CH_{3}}$) increase and electron-withdrawing groups ($\mathrm{{-}Cl}$, $\mathrm{{-}NO_{2}}$, $\mathrm{{-}CN}$) decrease the basicity; ortho substituents usually decrease it. Each extra aryl group on N lowers basicity sharply: $\mathrm{C_{6}H_{5}NH_{2}\gt(C_{6}H_{5})_{2}NH\gt(C_{6}H_{5})_{3}N}$.
  4. An amine whose N is not bonded to the ring (benzylamine, cyclohexanamine) behaves as an alkylamine.
✏️ Example 4 — How basic is an amine solution?
(a) Find the pH and the percentage of amine protonated in $0.10\ \mathrm{mol\,L^{-1}}$ aqueous methanamine ($\mathrm{p}K_{b}=3.38$). (b) Repeat for $0.10\ \mathrm{mol\,L^{-1}}$ aniline ($\mathrm{p}K_{b}=9.38$). (c) What is $\mathrm{p}K_{a}$ of the anilinium ion, and how many times larger is $K_{b}$ of methanamine than that of aniline?
Find the pH in (a) before you look:
(a) $\mathrm{pOH}=\tfrac12(3.38+1.00)=2.19$, so $\mathrm{pH}=11.81$. Then $[\mathrm{OH^{-}}]=10^{-2.19}=6.5\times10^{-3}\ \mathrm{mol\,L^{-1}}$, i.e. $6.5\%$ of the amine is protonated.
Refine $6.5\%$ is not negligible, so solve $\dfrac{x^{2}}{0.10-x}=K_{b}=4.17\times10^{-4}$ exactly: $x=6.25\times10^{-3}$, $\mathrm{pH}=11.80$, $6.3\%$ protonated. The shortcut was off by only $0.01$.
(b) $\mathrm{pOH}=\tfrac12(9.38+1.00)=5.19$, $\mathrm{pH}=8.81$; $[\mathrm{OH^{-}}]=6.5\times10^{-6}$, so only $0.0065\%$ of the aniline is protonated — the approximation is excellent here.
(c) $\mathrm{p}K_{a}(\mathrm{C_{6}H_{5}NH_{3}^{+}})=14.00-9.38=4.62$ — the anilinium ion is about as strong an acid as ethanoic acid. $K_{b}$ ratio $=10^{9.38-3.38}=10^{6.00}=1.0\times10^{6}$.
Check A tenfold change in $K_{b}$ changes the pH of an equal-concentration solution by only $0.5$; six powers of ten give $6\times0.5=3.0$ pH units: $11.81-8.81=3.00$ ✓.

In the basicity lab choose the ethylamines in water at $C=0.10\ \mathrm{mol\,L^{-1}}$. Which amine comes out as the strongest base?

With ethylamines, water, $C=0.10\ \mathrm{M}$ the readouts show strongest $\mathrm{(C_{2}H_{5})_{2}NH}$ ($\mathrm{p}K_{b}$ 3.00), weakest $\mathrm{NH_{3}}$, pH $11.98$ and $9.5\%$ protonated. The bars run $(C_{2}H_{5})_{2}NH\gt(C_{2}H_{5})_{3}N\gt C_{2}H_{5}NH_{2}\gt NH_{3}$: two ethyl groups give a strong $+I$ push while the cation keeps two N–H for hydrogen bonding. Now switch to gas phase: the strongest becomes $\mathrm{(C_{2}H_{5})_{3}N}$ (proton affinity $982\ \mathrm{kJ\,mol^{-1}}$) — with no water to solvate the cations, only the inductive effect counts. Switch to the anilines and every bar shrinks: the ring takes the lone pair.
Interactive 1 — Basicity Lab: Gas Phase, Water and the Benzene Ring

Pick a family of amines and a medium. On the left the bars rank the bases — in water by $\mathrm{p}K_{a}$ of the conjugate acid ($=14-\mathrm{p}K_{b}$, longer bar = stronger base), in the gas phase by proton affinity. On the right, the pH of each amine solution is plotted against concentration (exact equilibrium, including water's own ions). Slide $C$ or press Play to sweep from $0.001$ to $1\ \mathrm{mol\,L^{-1}}$.

0.10 M
strongest base—
weakest base—
pH (strongest, at C)—
% protonated (strongest)—

Which of the following is the weakest base in water?

Reactions of amines and the tests for 1°, 2° and 3° amines

Amines react as nucleophiles: the lone pair on nitrogen attacks a carbon (alkylation, acylation) or another nitrogen (nitrosation). After the attack, nitrogen usually has to lose a hydrogen to become neutral again — and that is why the number of N–H hydrogens decides the outcome and gives us the tests for the three classes.

Alkylation. Amines react with haloalkanes by $\mathrm{S_{N}2}$, each step adding one alkyl group to N — exactly the run-on reaction met in ammonolysis. With excess haloalkane every amine ends as the quaternary salt:

$$\mathrm{C_{2}H_{5}NH_{2}\xrightarrow{CH_{3}I}C_{2}H_{5}NHCH_{3}\xrightarrow{CH_{3}I}C_{2}H_{5}N(CH_{3})_{2}}$$ $$\mathrm{C_{2}H_{5}N(CH_{3})_{2}\xrightarrow{CH_{3}I}C_{2}H_{5}N^{+}(CH_{3})_{3}I^{-}}$$

A 1° amine thus needs three moles of iodomethane (and gives off three moles of HI, taken up by a base) to reach the quaternary salt; a 2° amine needs two and a 3° amine one.

Acylation. 1° and 2° amines react with acid chlorides, acid anhydrides and esters by nucleophilic substitution at the carbonyl carbon: an acyl group $\mathrm{RCO{-}}$ replaces a hydrogen on N, giving an amide. A base stronger than the amine — usually pyridine — is added to remove the HCl formed; otherwise HCl would protonate the remaining amine and stop the reaction.

$$\begin{aligned}\mathrm{C_{2}H_{5}NH_{2}+CH_{3}COCl}&\mathrm{\;\xrightarrow{pyridine}C_{2}H_{5}NHCOCH_{3}}\\&\mathrm{\;\quad+\,HCl}\end{aligned}$$ $$\begin{aligned}\mathrm{C_{6}H_{5}NH_{2}+(CH_{3}CO)_{2}O}&\mathrm{\;\xrightarrow{pyridine}C_{6}H_{5}NHCOCH_{3}}\\&\mathrm{\;\quad+\,CH_{3}COOH}\end{aligned}$$

The second product, N-phenylethanamide, is acetanilide. With benzoyl chloride the reaction is called benzoylation: $\mathrm{C_{6}H_{5}NH_{2}+C_{6}H_{5}COCl}$ $\mathrm{\rightarrow C_{6}H_{5}NHCOC_{6}H_{5}+HCl}$. 3° amines, with no N–H, are not acylated. In an amide the N lone pair is shared with the C=O group, so amides are hardly basic and the $\mathrm{{-}NHCOCH_{3}}$ group is a far milder activator of a benzene ring than $\mathrm{{-}NH_{2}}$ — the key to the protection strategy below.

Carbylamine reaction (isocyanide test). Heated with chloroform and ethanolic potassium hydroxide, aliphatic and aromatic primary amines give isocyanides (carbylamines), recognised at once by their extremely unpleasant smell:

$$\begin{aligned}\mathrm{R{-}NH_{2}+CHCl_{3}+3KOH}&\mathrm{\;\xrightarrow{heat}R{-}N{\equiv}C}\\&\mathrm{\;\quad+\,3KCl+3H_{2}O}\end{aligned}$$

The base turns chloroform into dichlorocarbene, $\mathrm{:CCl_{2}}$, which is attacked by the amine; the two hydrogens of $\mathrm{{-}NH_{2}}$ are lost with the two chlorines. A 2° or 3° amine does not have two hydrogens on N to lose, so only 1° amines give the test.

Reaction with nitrous acid. Nitrous acid is unstable and is made in the mixture from sodium nitrite and a mineral acid, $\mathrm{NaNO_{2}+HCl\rightarrow HNO_{2}+NaCl}$. Each class reacts differently:

Hinsberg test. Benzenesulphonyl chloride, $\mathrm{C_{6}H_{5}SO_{2}Cl}$ (Hinsberg's reagent), reacts with 1° and 2° amines just as an acid chloride does, giving sulphonamides:

$$\mathrm{C_{6}H_{5}SO_{2}Cl+H_{2}N{-}R\rightarrow C_{6}H_{5}SO_{2}NH{-}R+HCl}$$ $$\mathrm{C_{6}H_{5}SO_{2}Cl+HNR_{2}\rightarrow C_{6}H_{5}SO_{2}NR_{2}+HCl}$$

The sulphonyl group is strongly electron-withdrawing, so the N–H left in the product of a 1° amine is acidic: it is removed by KOH and the sulphonamide dissolves as its potassium salt, $\mathrm{C_{6}H_{5}SO_{2}N^{-}R\,K^{+}}$. The product from a 2° amine has no N–H and stays insoluble. A 3° amine has no N–H to replace and does not react. (In practice 4-methylbenzenesulphonyl chloride is often used instead; it works the same way.)

📐 Rule 18.4 — Telling 1°, 2° and 3° amines apart
Test1° amine2° amine3° amine
Hinsberg ($\mathrm{C_{6}H_{5}SO_{2}Cl}$, then KOH)sulphonamide, soluble in KOHsulphonamide, insoluble in KOHno reaction
carbylamine ($\mathrm{CHCl_{3}}$ + KOH, heat)foul-smelling isocyanideno reactionno reaction
$\mathrm{NaNO_{2}+HCl}$, coldaliphatic: $\mathrm{N_{2}}$ gas + alcohol; aromatic: diazonium salt (273–278 K)yellow oily N-nitrosaminealiphatic: soluble salt; aromatic: para-nitroso compound
acylation ($\mathrm{CH_{3}COCl}$)amideamideno reaction

All these tests depend on hydrogen atoms on nitrogen: two on a 1° amine, one on a 2° amine, none on a 3° amine.

Electrophilic substitution in aniline. The $\mathrm{{-}NH_{2}}$ group feeds its lone pair into the ring ($+M$), making the ortho and para carbons electron-rich (resonance structures above). It is one of the strongest activating, ortho/para-directing groups known — so strong that the reactions are hard to stop at one substitution, and the basic nitrogen causes side reactions with acidic reagents.

📐 Rule 18.5 — Electrophilic substitution in aniline
  1. $\mathrm{{-}NH_{2}}$ is strongly activating and ortho/para-directing; with bromine water all three free o/p positions are substituted (2,4,6-tribromoaniline).
  2. In strongly acidic media aniline is converted largely into $\mathrm{C_{6}H_{5}NH_{3}^{+}}$, which is meta-directing — hence the large meta fraction on direct nitration — and acidic oxidising reagents destroy much of the amine.
  3. Protection: acetylation to $\mathrm{{-}NHCOCH_{3}}$ (still o/p-directing, but much less activating, not basic, not easily oxidised, and bulky enough to favour para), then substitution, then hydrolysis ($\mathrm{H_{3}O^{+}}$ or $\mathrm{OH^{-}}$, heat) restores $\mathrm{{-}NH_{2}}$.
  4. Sulphonation gives the para product, sulphanilic acid; Friedel–Crafts reactions fail.
✏️ Example 5 — JEE level: three isomers and the Hinsberg test
Three isomeric amines X, Y and Z have the formula $\mathrm{C_{3}H_{9}N}$. With benzenesulphonyl chloride X gives a product that dissolves in aqueous KOH; Y gives a product insoluble in KOH; Z does not react. X evolves a gas with $\mathrm{NaNO_{2}/HCl}$ and gives an alcohol that is oxidised by acidified dichromate to propanoic acid. (a) Identify X, Y and Z. (b) Which of them gives a yellow oily liquid with nitrous acid, and which gives the carbylamine test? (c) Arrange them in order of boiling point and of expected basicity in water.
Classes Hinsberg: X is 1° (sulphonamide soluble in alkali), Y is 2°, Z is 3°. The $\mathrm{C_{3}H_{9}N}$ isomers are propan-1-amine and propan-2-amine (1°), N-methylethanamine (2°) and N,N-dimethylmethanamine (3°).
(a) X's alcohol oxidises to a carboxylic acid with three carbons, so it is the 1° alcohol propan-1-ol and X is propan-1-amine (propan-2-amine would give propan-2-ol and then propanone). Y = N-methylethanamine, $\mathrm{CH_{3}NHC_{2}H_{5}}$; Z = N,N-dimethylmethanamine, $\mathrm{(CH_{3})_{3}N}$.
(b) Y, the 2° amine, gives the yellow N-nitrosamine $\mathrm{CH_{3}N(C_{2}H_{5}){-}N{=}O}$. Only X, the 1° amine, gives the carbylamine test.
(c) Boiling point (hydrogen bonding, two N–H > one N–H > none): X (321 K) $\gt$ Y (310 K) $\gt$ Z (276 K). Basicity in water, by the methyl-series pattern $2^{\circ}\gt1^{\circ}\gt3^{\circ}$: Y $\gt$ X $\gt$ Z.
Check Each structure has 3 C, 9 H, 1 N; X, Y and Z are all different ✓.
✏️ Example 6 — JEE level: making 4-bromoaniline and 4-nitroaniline
(a) Explain why aniline with bromine water does not give 4-bromoaniline, and write a three-step route from aniline to 4-bromoaniline. (b) Explain why the direct nitration of aniline gives much meta product, and give a route to 4-nitroaniline. (c) In route (a) the three steps proceed in 90%, 80% and 90% yield. What mass of 4-bromoaniline ($\mathrm{C_{6}H_{6}BrN}$) is obtained from $9.3\ \mathrm{g}$ of aniline ($\mathrm{Br}=80$)?
(a) Why $\mathrm{{-}NH_{2}}$ activates the ring so strongly that bromine substitutes all three o/p positions at once: 2,4,6-tribromoaniline.
(a) Route (1) $\mathrm{C_{6}H_{5}NH_{2}\xrightarrow{(CH_{3}CO)_{2}O}C_{6}H_{5}NHCOCH_{3}}$ (pyridine); (2) $\mathrm{\xrightarrow{Br_{2},\ CH_{3}COOH}4{-}BrC_{6}H_{4}NHCOCH_{3}}$; (3) $\mathrm{\xrightarrow{H_{3}O^{+},\ heat}4{-}BrC_{6}H_{4}NH_{2}}$. The amide N shares its lone pair with C=O, so only one Br enters, mostly para because the bulky acetamido group shields the ortho positions.
(b) In nitrating acid most aniline is the anilinium ion, whose $\mathrm{{-}NH_{3}^{+}}$ group is meta-directing; nitric acid also oxidises free aniline. Route: acetylate, nitrate ($\mathrm{HNO_{3}/H_{2}SO_{4}}$, 288 K) to 4-nitroacetanilide, hydrolyse to 4-nitroaniline (figure above).
(c) $n(\text{aniline})=\dfrac{9.3}{93}=0.10\ \mathrm{mol}$; overall yield $0.90\times0.80\times0.90=0.648$; $M(\mathrm{C_{6}H_{6}BrN})=172$: mass $=0.10\times0.648\times172=11.1\ \mathrm{g}$.
Check Protection costs two extra steps but turns a useless reaction (tribromination, or a meta/para mixture with tar) into a clean one — the standard trade-off in aromatic synthesis.

On the test bench choose N-methylaniline and the Hinsberg test, then press Play. What do you see after the excess KOH has been added?

Choose N-methylaniline with the Hinsberg test: the readouts show class "2° aromatic", product $\mathrm{C_{6}H_{5}SO_{2}N(CH_{3})C_{6}H_{5}}$ and the final observation "solid stays: no N–H left, insoluble in KOH; acid changes nothing". The one N–H of the amine is used up in making the sulphonamide, so there is nothing acidic for KOH to remove. Now pick aniline: the solid dissolves in KOH and comes back with acid (1°). Pick N,N-dimethylaniline: no reaction at all (3°). Then try the carbylamine test — only the three 1° amines smell — and nitrous acid, where ethanamine fizzes in the cold but aniline does not.
Interactive 2 — Amine Test Bench: Hinsberg, Carbylamine and Nitrous Acid

Choose an amine and a test, then press Play to add the reagents one after another. The test tube shows what you would see — a solid, an oily layer, gas bubbles, a smell or a colour — and the cards on the right list each stage. Work out the class of the amine from the observations, then check it in the readouts.

class—
product—
final observation—
what it shows—
⚠️ JEE Main traps

1. Classifying by the wrong atom. An amine's class counts carbon groups on N. $\mathrm{(CH_{3})_{3}CNH_{2}}$ is a 1° amine; benzylamine is a 1° aliphatic amine and behaves like one — it gives an alcohol and $\mathrm{N_{2}}$ with nitrous acid, not a diazonium salt.

2. "More alkyl groups, stronger base" in water. True only in the gas phase. In water $\mathrm{(CH_{3})_{2}NH\gt CH_{3}NH_{2}\gt(CH_{3})_{3}N\gt NH_{3}}$ and $\mathrm{(C_{2}H_{5})_{2}NH\gt(C_{2}H_{5})_{3}N\gt C_{2}H_{5}NH_{2}\gt NH_{3}}$. Read the question for "aqueous" or "gas phase".

3. Carbon count in the preparations. Hoffmann: one carbon fewer than the amide. Nitrile reduction: one more than the haloalkane. Amide reduction and Gabriel: no change. Gabriel and ammonolysis never give arylamines.

4. Which amine does what. Carbylamine test: all 1° amines (aliphatic and aromatic). $\mathrm{N_{2}}$ in the cold with $\mathrm{HNO_{2}}$: 1° aliphatic only. Yellow oil: 2°. Hinsberg product soluble in alkali: 1°.

5. Aniline in acid. Direct nitration gives about 47% meta product (anilinium ion); bromine water gives 2,4,6-tribromoaniline, not a monobromo compound; Friedel–Crafts fails. Protect by acetylation first.

An amine gives no reaction with benzenesulphonyl chloride, but on treatment with $\mathrm{NaNO_{2}/HCl}$ at 273 K it gives a green para-substituted product. The amine is

Exercises

Use $\mathrm{p}K_{b}$ values (298 K): $\mathrm{NH_{3}}$ 4.74, $\mathrm{CH_{3}NH_{2}}$ 3.38, $\mathrm{(CH_{3})_{2}NH}$ 3.27, $\mathrm{(CH_{3})_{3}N}$ 4.22, $\mathrm{C_{2}H_{5}NH_{2}}$ 3.29, $\mathrm{(C_{2}H_{5})_{2}NH}$ 3.00, $\mathrm{(C_{2}H_{5})_{3}N}$ 3.25, benzylamine 4.70, aniline 9.38, 4-methylaniline 8.92, 4-methoxyaniline 8.66, 4-nitroaniline 13.0; $K_{w}=1.0\times10^{-14}$; molar volume at STP $22.4\ \mathrm{L\,mol^{-1}}$; atomic masses H 1, C 12, N 14, O 16, Na 23, Br 80.

I
Structure, classification, naming and isomers.
  • 1 Classify as 1°, 2° or 3°, and as aliphatic or aromatic: (a) $\mathrm{(CH_{3})_{3}CNH_{2}}$ (b) $\mathrm{(CH_{3})_{2}NH}$ (c) $\mathrm{C_{6}H_{5}N(CH_{3})_{2}}$ (d) $\mathrm{C_{6}H_{5}CH_{2}NH_{2}}$ (e) $\mathrm{C_{6}H_{5}NHCH_{3}}$.
  • 2 Give IUPAC names: (a) $\mathrm{CH_{3}CH_{2}CH(NH_{2})CH_{3}}$ (b) $\mathrm{(CH_{3})_{2}NCH_{2}CH_{3}}$ (c) $\mathrm{H_{2}N(CH_{2})_{6}NH_{2}}$ (d) $\mathrm{4{-}CH_{3}C_{6}H_{4}NH_{2}}$.
  • 3 Write condensed formulas for (a) N-ethyl-N-methylpropan-1-amine (b) 2-methylpropan-2-amine (c) 2,4-dibromoaniline (d) N,N-diethylaniline.
  • 4 How many structurally isomeric amines have the formula $\mathrm{C_{3}H_{9}N}$? How many of them are primary?
  • 5 How many structurally isomeric primary amines have the formula $\mathrm{C_{5}H_{13}N}$?
  • 6 How many amines of formula $\mathrm{C_{7}H_{9}N}$ contain a benzene ring? How many of these are arylamines (N bonded to the ring)?
  • 7 State the hybridisation of N and the shape about N in trimethylamine. Why is the C–N–C angle slightly less than $109.5^\circ$, and why is the C–N bond in aniline shorter than in methanamine?
  • 8 How many structurally isomeric tertiary amines have the formula $\mathrm{C_{5}H_{13}N}$?
1 (a) 1° aliphatic (one carbon group on N) (b) 2° aliphatic (c) 3° aromatic (d) 1° aliphatic — N is on $\mathrm{CH_{2}}$, not on the ring (e) 2° aromatic.
2 (a) butan-2-amine (b) N,N-dimethylethanamine (c) hexane-1,6-diamine (d) 4-methylaniline (4-methylbenzenamine, p-toluidine).
3 (a) $\mathrm{CH_{3}CH_{2}CH_{2}N(CH_{3})CH_{2}CH_{3}}$ (b) $\mathrm{(CH_{3})_{3}CNH_{2}}$ (c) $\mathrm{C_{6}H_{3}Br_{2}NH_{2}}$ with Br at C2 and C4 (C1 bears $\mathrm{NH_{2}}$) (d) $\mathrm{C_{6}H_{5}N(C_{2}H_{5})_{2}}$.
4 Four: propan-1-amine, propan-2-amine (both 1°), N-methylethanamine (2°), N,N-dimethylmethanamine (3°). Two are primary.
5 One $\mathrm{C_{5}H_{11}}$ group on $\mathrm{NH_{2}}$, and there are eight pentyl groups: pentan-1-, pentan-2-, pentan-3-, 2-methylbutan-1-, 2-methylbutan-2-, 3-methylbutan-2-, 3-methylbutan-1- and 2,2-dimethylpropan-1-amine. 8.
6 Benzylamine $\mathrm{C_{6}H_{5}CH_{2}NH_{2}}$, N-methylaniline $\mathrm{C_{6}H_{5}NHCH_{3}}$, and 2-, 3- and 4-methylaniline: 5 in all, of which 4 are arylamines (all except benzylamine).
7 $sp^{3}$, trigonal pyramidal. The lone pair repels the bonding pairs more strongly than they repel each other, closing the angle to about $108^\circ$. In aniline the N lone pair is delocalised into the ring, giving the C–N bond partial double-bond character ($140$ vs $147\ \mathrm{pm}$).
8 Three groups with 5 carbons in total: $1+1+3$ gives N,N-dimethylpropan-1-amine and N,N-dimethylpropan-2-amine; $1+2+2$ gives N-ethyl-N-methylethanamine. 3.
II
Preparation of amines.
  • 1 What mass of aniline is obtained, at 100% yield, by reducing $24.6\ \mathrm{g}$ of nitrobenzene? How many moles of $\mathrm{H_{2}}$ are used?
  • 2 Give the products of ethanamide, $\mathrm{CH_{3}CONH_{2}}$, with (a) $\mathrm{LiAlH_{4}}$ then water (b) $\mathrm{Br_{2}}$ and aqueous NaOH.
  • 3 Convert chloroethane into propan-1-amine in two steps.
  • 4 Why does heating bromoethane with ammonia give a mixture of products? How would you make ethanamine the main product?
  • 5 Explain why the Gabriel synthesis cannot be used to make (a) aniline (b) a secondary amine.
  • 6 What mass of benzamide ($\mathrm{C_{6}H_{5}CONH_{2}}$) is needed to make $9.3\ \mathrm{g}$ of aniline by Hoffmann degradation if the yield is 80%?
  • 7 What mass of bromine is consumed in the Hoffmann degradation of $0.25\ \mathrm{mol}$ of an amide? How many moles of NaOH are needed?
  • 8 An amide X gives 2-methylpropan-2-amine on Hoffmann degradation. Identify X and find its molar mass.
1 $M(\mathrm{C_{6}H_{5}NO_{2}})=123$: $0.20\ \mathrm{mol}$, giving $0.20\times93=18.6\ \mathrm{g}$ aniline and using $3\times0.20=0.60\ \mathrm{mol\ H_{2}}$.
2 (a) ethanamine $\mathrm{CH_{3}CH_{2}NH_{2}}$ (carbon count kept) (b) methanamine $\mathrm{CH_{3}NH_{2}}$ (one carbon lost, as carbonate).
3 $\mathrm{CH_{3}CH_{2}Cl\xrightarrow{KCN}CH_{3}CH_{2}CN}$, then $\mathrm{\xrightarrow{LiAlH_{4}\ \text{or}\ H_{2}/Ni}CH_{3}CH_{2}CH_{2}NH_{2}}$.
4 Ethanamine is a stronger nucleophile than ammonia ($+I$ of $\mathrm{C_{2}H_{5}}$) and competes for bromoethane, giving diethylamine, triethylamine and the quaternary salt. Use a large excess of ammonia so that bromoethane meets $\mathrm{NH_{3}}$ far more often than the amine.
5 (a) Aryl halides do not undergo $\mathrm{S_{N}2}$ substitution by the phthalimide anion. (b) The N-alkylphthalimide has no N–H, so a second alkyl group cannot be introduced — the method stops at the 1° amine.
6 $9.3\ \mathrm{g}$ aniline $=0.10\ \mathrm{mol}$; at 80%, amide needed $=0.10/0.80=0.125\ \mathrm{mol}$; $M(\mathrm{C_{7}H_{7}NO})=121$: $15.1\ \mathrm{g}$.
7 One $\mathrm{Br_{2}}$ per amide: $0.25\times160=40\ \mathrm{g}$; NaOH: $4\times0.25=1.0\ \mathrm{mol}$.
8 Put back one carbonyl carbon on the carbon that carries N: X $=\mathrm{(CH_{3})_{3}CCONH_{2}}$, 2,2-dimethylpropanamide, $\mathrm{C_{5}H_{11}NO}$, $M=60+11+14+16=101\ \mathrm{g\,mol^{-1}}$.
III
Basic character.
  • 1 An amine has $K_{b}=4.0\times10^{-4}$. Find its $\mathrm{p}K_{b}$.
  • 2 Find $\mathrm{p}K_{a}$ of the anilinium ion, $\mathrm{C_{6}H_{5}NH_{3}^{+}}$.
  • 3 Find the pH of $0.050\ \mathrm{mol\,L^{-1}}$ aqueous dimethylamine (use $\mathrm{pOH}=\tfrac12(\mathrm{p}K_{b}-\log C)$).
  • 4 Arrange the methylamines and ammonia in order of basicity (a) in the gas phase (b) in water, and explain the difference.
  • 5 Arrange in order of decreasing basicity: aniline, 4-nitroaniline, 4-methoxyaniline, 4-methylaniline, benzylamine.
  • 6 How many times larger is $K_{b}$ of benzylamine than $K_{b}$ of aniline?
  • 7 2-Methylaniline is a weaker base than aniline although $\mathrm{{-}CH_{3}}$ releases electrons. Explain.
  • 8 A $0.20\ \mathrm{mol\,L^{-1}}$ solution of an unknown amine has $\mathrm{pH}=12.00$. Find $\mathrm{p}K_{b}$ (do not neglect the amount protonated) and suggest which amine from the list above it could be.
1 $\mathrm{p}K_{b}=-\log(4.0\times10^{-4})=4-0.602=3.40$.
2 $\mathrm{p}K_{a}=14.00-9.38=4.62$.
3 $\mathrm{pOH}=\tfrac12(3.27+1.30)=2.29$, $\mathrm{pH}=11.71$ (the exact quadratic gives $11.69$, since about 10% is protonated).
4 (a) $\mathrm{(CH_{3})_{3}N\gt(CH_{3})_{2}NH\gt CH_{3}NH_{2}\gt NH_{3}}$ — inductive effect only. (b) $\mathrm{(CH_{3})_{2}NH\gt CH_{3}NH_{2}\gt(CH_{3})_{3}N\gt NH_{3}}$ — the cation $\mathrm{(CH_{3})_{3}NH^{+}}$ has only one N–H for hydrogen bonding with water and is crowded, so it is poorly solvated.
5 benzylamine (4.70) $\gt$ 4-methoxyaniline (8.66) $\gt$ 4-methylaniline (8.92) $\gt$ aniline (9.38) $\gt$ 4-nitroaniline (13.0).
6 $10^{9.38-4.70}=10^{4.68}=4.79\times10^{4}$ — the $\mathrm{CH_{2}}$ group stops the lone pair from being delocalised into the ring.
7 Ortho effect: the methyl group next to $\mathrm{{-}NH_{2}}$ crowds the $\mathrm{{-}NH_{3}^{+}}$ group of the cation, hindering its solvation (and its formation), which outweighs the small $+I$ effect.
8 $\mathrm{pOH}=2.00$, $[\mathrm{OH^{-}}]=[\mathrm{BH^{+}}]=0.010$, $[\mathrm{B}]=0.19$: $K_{b}=\dfrac{(0.010)^{2}}{0.19}=5.26\times10^{-4}$, $\mathrm{p}K_{b}=3.28$ — close to ethanamine (3.29) or methanamine (3.38).
IV
Reactions, tests and aromatic substitution.
  • 1 Write equations for (a) ethanamine + ethanoyl chloride (b) aniline + benzoyl chloride. Why is pyridine added?
  • 2 How many of the following give the carbylamine test: ethanamine, N-methylethanamine, aniline, benzylamine, N,N-dimethylaniline, 2-methylpropan-2-amine?
  • 3 What volume of $\mathrm{N_{2}}$ at STP is evolved when $2.95\ \mathrm{g}$ of propan-1-amine reacts with excess nitrous acid?
  • 4 Describe what you would observe in the Hinsberg test with (a) propan-2-amine (b) N-ethylethanamine (c) N,N-dimethylaniline.
  • 5 How many moles of iodomethane are needed to convert one mole of ethanamine completely into the quaternary ammonium salt? Name the salt.
  • 6 What mass of 2,4,6-tribromoaniline is formed when $4.65\ \mathrm{g}$ of aniline reacts with excess bromine water?
  • 7 Why does direct nitration of aniline give a large amount of 3-nitroaniline? How many steps does the protected route from aniline to 4-nitroaniline take?
  • 8 Explain why (a) sulphanilic acid has a high melting point and does not dissolve in ether (b) aniline does not undergo Friedel–Crafts alkylation.
1 (a) $\mathrm{C_{2}H_{5}NH_{2}+CH_{3}COCl}$ $\mathrm{\rightarrow C_{2}H_{5}NHCOCH_{3}+HCl}$ (N-ethylethanamide) (b) $\mathrm{C_{6}H_{5}NH_{2}+C_{6}H_{5}COCl}$ $\mathrm{\rightarrow C_{6}H_{5}NHCOC_{6}H_{5}+HCl}$ (N-phenylbenzamide). Pyridine removes HCl, which would otherwise protonate the unreacted amine and stop it acting as a nucleophile.
2 The 1° amines: ethanamine, aniline, benzylamine and 2-methylpropan-2-amine — 4.
3 $M(\mathrm{C_{3}H_{9}N})=59$: $0.050\ \mathrm{mol}$ amine gives $0.050\ \mathrm{mol\ N_{2}}=0.050\times22.4=1.12\ \mathrm{L}$.
4 (a) 1°: a sulphonamide forms and dissolves in KOH; acid reprecipitates it. (b) 2°: a sulphonamide forms that is insoluble in KOH. (c) 3°: no reaction; the amine stays undissolved in alkali but dissolves in dilute HCl.
5 Three (N gains three methyl groups, losing two H as HI on the way and gaining the third as a positive charge): ethyltrimethylammonium iodide, $\mathrm{C_{2}H_{5}N^{+}(CH_{3})_{3}I^{-}}$.
6 $0.050\ \mathrm{mol}$ aniline gives $0.050\ \mathrm{mol\ C_{6}H_{4}Br_{3}N}$ ($M=72+4+240+14=330$): $16.5\ \mathrm{g}$.
7 In the nitrating acid most aniline is protonated to $\mathrm{C_{6}H_{5}NH_{3}^{+}}$, which is meta-directing. Protected route: acetylation, nitration, hydrolysis — 3 steps.
8 (a) It exists as the zwitterion $\mathrm{{}^{+}H_{3}NC_{6}H_{4}SO_{3}^{-}}$ — an ionic solid. (b) The Lewis base N binds the catalyst $\mathrm{AlCl_{3}}$; the resulting positive nitrogen strongly deactivates the ring.
🎯 Exam corner JEE Main · MCQJEE Main · Numerical

E1. JEE Main · MCQ The correct order of basic strength in aqueous solution is (A) $\mathrm{(CH_{3})_{3}N\gt(CH_{3})_{2}NH\gt CH_{3}NH_{2}\gt C_{6}H_{5}NH_{2}}$ (B) $\mathrm{(CH_{3})_{2}NH\gt CH_{3}NH_{2}\gt(CH_{3})_{3}N\gt C_{6}H_{5}NH_{2}}$ (C) $\mathrm{CH_{3}NH_{2}\gt(CH_{3})_{2}NH\gt(CH_{3})_{3}N\gt C_{6}H_{5}NH_{2}}$ (D) $\mathrm{(CH_{3})_{2}NH\gt(CH_{3})_{3}N\gt CH_{3}NH_{2}\gt C_{6}H_{5}NH_{2}}$

Idea In water: $+I$ effect, solvation of the cation by hydrogen bonding and steric hindrance. For methyl groups the 3° cation is so poorly solvated that the 3° amine falls below the 1°: $\mathrm{p}K_{b}$ 3.27, 3.38, 4.22; aniline 9.38.
Options (A) is the gas-phase order; (D) is the pattern of the ethyl series; (C) puts the 1° amine first.
Answer (B).
⏱ Shortcut Methyl series in water: "2, 1, 3" ($2^{\circ}\gt1^{\circ}\gt3^{\circ}$); ethyl series: "2, 3, 1". Arylamines always come last.

E2. JEE Main · Numerical How many structurally isomeric secondary amines have the molecular formula $\mathrm{C_{5}H_{13}N}$? Give the answer to the nearest integer.

Split A 2° amine is $\mathrm{R{-}NH{-}R'}$ with 5 carbons shared: $1+4$ or $2+3$.
Count $1+4$: methyl with each of the four butyl groups (butyl, butan-2-yl, 2-methylpropyl, tert-butyl) — 4. $2+3$: ethyl with propyl or propan-2-yl — 2. Total $4+2=6$.
Answer $6$.
⏱ Shortcut Number of $\mathrm{C}_{n}$ alkyl groups: $n=1,2,3,4,5\Rightarrow1,1,2,4,8$. Multiply along each split and add: $1\times4+1\times2=6$.

E3. JEE Main · MCQ A compound X, $\mathrm{C_{7}H_{7}NO}$, gives Y on warming with $\mathrm{Br_{2}}$ and aqueous NaOH. Y gives a foul smell with chloroform and ethanolic KOH, and with $\mathrm{NaNO_{2}/HCl}$ at 273 K gives a clear solution that evolves no gas until warmed. X is (A) N-phenylmethanamide (B) 4-aminobenzaldehyde (C) benzaldehyde oxime (D) benzamide

Idea Only a primary amide $\mathrm{RCONH_{2}}$ undergoes the Hoffmann degradation. Y is a 1° amine (carbylamine) and aromatic (stable diazonium salt in the cold, no $\mathrm{N_{2}}$), with one carbon fewer than X: aniline.
Check $\mathrm{C_{6}H_{5}CONH_{2}}$ is $\mathrm{C_{7}H_{7}NO}$ ✓. (A) is an N-substituted amide, (B) an amino aldehyde and (C) an oxime — all $\mathrm{C_{7}H_{7}NO}$, none has $\mathrm{{-}CONH_{2}}$.
Answer (D).

E4. JEE Main · Numerical $0.59\ \mathrm{g}$ of propan-1-amine is treated with excess $\mathrm{NaNO_{2}}$ and dilute HCl at room temperature. Find the volume of nitrogen evolved, in mL at STP (molar volume $22.4\ \mathrm{L\,mol^{-1}}$). Give the answer to the nearest integer.

Moles $M(\mathrm{C_{3}H_{9}N})=59\ \mathrm{g\,mol^{-1}}$: $n=0.59/59=0.010\ \mathrm{mol}$.
Gas $\mathrm{RNH_{2}+HNO_{2}\rightarrow ROH+N_{2}+H_{2}O}$: one mole $\mathrm{N_{2}}$ per $\mathrm{{-}NH_{2}}$, so $0.010\times22\,400=224\ \mathrm{mL}$.
Answer $224$.
⏱ Shortcut A 1° aliphatic amine releases all its amino nitrogen as $\mathrm{N_{2}}$: mL of $\mathrm{N_{2}}$ $=22\,400\times$ (moles of $\mathrm{NH_{2}}$ groups).

E5. JEE Main · MCQ Nitration of aniline with a mixture of concentrated $\mathrm{HNO_{3}}$ and $\mathrm{H_{2}SO_{4}}$ gives a considerable amount of 3-nitroaniline because (A) in the strongly acidic medium aniline is converted into the anilinium ion, which is meta-directing (B) the $\mathrm{{-}NH_{2}}$ group is meta-directing (C) the para position is blocked by hydrogen bonding with the acid (D) the nitronium ion first attacks nitrogen and then migrates to the meta position

Idea Aniline is a base; in nitrating acid it is largely $\mathrm{C_{6}H_{5}NH_{3}^{+}}$. The $\mathrm{{-}NH_{3}^{+}}$ group has no lone pair, withdraws electrons and directs meta.
Others (B) is false — $\mathrm{{-}NH_{2}}$ is o/p-directing; (C) and (D) are invented mechanisms.
Answer (A).

E6. JEE Main · Numerical A $0.10\ \mathrm{mol\,L^{-1}}$ aqueous solution of an amine has pH $11.0$ at 298 K. Find the $\mathrm{p}K_{b}$ of the amine. Give the answer to the nearest integer.

Ions $\mathrm{pOH}=3.0$, so $[\mathrm{OH^{-}}]=[\mathrm{BH^{+}}]=1.0\times10^{-3}$ and $[\mathrm{B}]=0.10-0.001=0.099\ \mathrm{mol\,L^{-1}}$.
$K_{b}$ $K_{b}=\dfrac{(1.0\times10^{-3})^{2}}{0.099}=1.01\times10^{-5}$, so $\mathrm{p}K_{b}=5.00$.
Answer $5$.
⏱ Shortcut $\mathrm{pOH}=\tfrac12(\mathrm{p}K_{b}-\log C)$ ⇒ $\mathrm{p}K_{b}=2\,\mathrm{pOH}+\log C=6.0-1.0=5$.
🔬 Research–Teaching NexusResearch-tutored · optional, about 45 minutes

Research question. Why do cooks squeeze lemon on fish, and how far must the pH fall before a volatile amine stops escaping from a solution?

Why it matters. The smell of stale fish is mainly trimethylamine, formed by bacteria from a compound in fish muscle; food inspectors measure "total volatile basic nitrogen" to judge freshness. The same acid–base idea is used to scrub ammonia from poultry-house air, to keep amine drugs in solution as their salts, and to capture carbon dioxide with amine solutions in power stations. Only the free amine is volatile; its protonated form stays in the water.

What to do.

  1. Work with dilute household ammonia (a cleaning solution, diluted about 1 : 20; do it in a ventilated place) as a safe model of a volatile amine. Measure its pH with universal-indicator paper or a cheap pH pen.
  2. Add lemon juice or vinegar a few drops at a time, recording the pH and noting the smell after each addition (waft, never sniff directly).
  3. For each pH calculate the fraction of the base still unprotonated, $f=\dfrac{1}{1+10^{\,\mathrm{p}K_{a}-\mathrm{pH}}}$, with $\mathrm{p}K_{a}(\mathrm{NH_{4}^{+}})=14.00-4.74=9.26$. Repeat the calculation for trimethylamine ($\mathrm{p}K_{a}$ of its cation $=14.00-4.22=9.78$).
  4. Plot $f$ against pH for both bases and mark the pH at which you could no longer smell ammonia.
  5. Estimate the pH of lemon juice on the surface of a piece of fish, and the fraction of trimethylamine still free there.

Tools: Universal-indicator paper or pH pen, dropper, dilute household ammonia, lemon juice or vinegar, a spreadsheet.

Hand in: A table of pH, smell and calculated $f$; the two curves of $f$ against pH; one paragraph explaining, with $\mathrm{p}K_{b}$ values, why acid removes the smell and why the smell returns if the dish is made alkaline.

Going further. Aniline ($\mathrm{p}K_{a}$ of $\mathrm{C_{6}H_{5}NH_{3}^{+}}$ $=4.62$) is still mostly unprotonated at pH 5. Where must the pH be to hold 99% of it as the salt? Why is a stronger acid needed to extract aniline from an organic solvent than to extract an alkylamine?

Instructor note: students usually lose the ammonia smell somewhere around pH 7–8, where $f$ is already below 5%; the curve shows that each pH unit below $\mathrm{p}K_{a}$ cuts the free base tenfold. Lemon juice (pH about 2–3) leaves essentially no free trimethylamine. The 99% question gives pH $\le 2.6$ for aniline, which is why dilute HCl rather than a weak acid is used to extract it. Insist on dilute solutions and good ventilation.

🧪 Self-check quiz

0/5 correct

Q1. Which of the following is a tertiary amine?

Q2. Which method converts a compound into a primary amine containing one carbon atom fewer?

Q3. Which amine gives a foul-smelling product when heated with chloroform and ethanolic KOH?

Q4. The weakest base among the following is

Q5. Aniline is shaken with bromine water at room temperature. The main product is