9.1 The Modern Periodic Law and the Periodic Table
Arrange the elements in order of atomic number and their properties repeat at regular intervals — the modern periodic law. The long form of the table is the Aufbau filling order drawn as a map, so an electronic configuration alone tells you an element's period, group and block.
Chemists know 118 elements. Learning the chemistry of each one separately would be hopeless — but nobody has to, because the elements fall into families. Lithium, sodium and potassium are soft metals that fizz in water and form $\mathrm{MCl}$ chlorides; fluorine, chlorine and bromine are coloured, poisonous non-metals that form $\mathrm{HX}$ acids; helium, neon and argon hardly react at all. The periodic table arranges the elements so that such families stand in the same column, and so that the gradual change of properties from one family to the next can be read off from left to right.
In this section we see why the table has exactly the shape it has. Its rows and columns are not an arbitrary filing system: they are the order in which electrons fill the orbitals of Section 2.4. Once you see this, you can place any element — even one that has not yet been made — from its atomic number alone, find its period, group and block from its electronic configuration, and give a systematic name to the superheavy elements beyond $Z=100$. The trends in size, ionisation enthalpy and reactivity that follow from this structure are the subject of Section 9.2.
From Mendeleev to the modern periodic law
A short history, for motivation only. By the 1860s about sixty elements were known, and several chemists had noticed repeating patterns. Döbereiner grouped similar elements in threes ("triads", such as Ca, Sr, Ba, in which the middle atomic mass is roughly the mean of the outer two); Newlands noticed that, listed by atomic mass, every eighth element resembled the first ("octaves"). The decisive step was taken in 1869 by Dmitri Mendeleev (and, independently, Lothar Meyer, who plotted physical properties such as atomic volume). Mendeleev stated that the properties of the elements are a periodic function of their atomic masses, and he trusted the chemical families more than the masses: he left gaps for elements still unknown and predicted their properties. His "eka-aluminium" and "eka-silicon" were discovered within twenty years as gallium (1875) and germanium (1886), with densities, atomic masses and oxide formulas very close to his predictions.
Mendeleev's table had a few awkward spots. To keep tellurium with oxygen and sulphur and iodine with the halogens he had to put Te ($127.6\ \mathrm{u}$) before I ($126.9\ \mathrm{u}$), against the order of mass; argon ($39.9$) has to come before potassium ($39.1$), and cobalt ($58.9$) before nickel ($58.7$). In 1913 Henry Moseley measured the frequencies of the characteristic X-rays emitted by the elements and found that the square root of the frequency rises in a perfectly straight line with the atomic number $Z$ — the number of protons in the nucleus — and not with the atomic mass. The atomic number, not the mass, is the fundamental property, and with it every awkward spot disappears: $Z(\mathrm{Te})=52\lt Z(\mathrm{I})=53$, $Z(\mathrm{Ar})=18\lt Z(\mathrm{K})=19$.
The physical and chemical properties of the elements are periodic functions of their atomic numbers: when the elements are arranged in order of increasing atomic number, elements with similar properties recur at regular intervals.
The reason (which Mendeleev could not know) is electronic: the chemistry of an atom is decided mainly by the configuration of its outermost (valence) shell, and as $Z$ increases the same kind of valence configuration — $ns^{1}$, $ns^{2}np^{5}$, $ns^{2}np^{6}$ … — keeps coming back with a larger $n$. Periodicity of properties is periodicity of valence-shell configuration.
The long form of the periodic table, used everywhere today, is built directly on this law. Each element is placed in a box with its atomic number; elements are read in order of $Z$ along the rows, and a new row starts every time a new principal shell begins to fill.
A period is a horizontal row. There are seven. The period number equals the principal quantum number $n$ of the valence (outermost) shell: period $n$ begins with the element whose new electron enters $ns$ and ends with the noble gas whose $np$ subshell has just been completed (period 1 ends at helium, $1s^{2}$).
A group is a vertical column. There are 18, numbered 1 to 18 from left to right (IUPAC numbering, which replaced the older IA–VIIIA / IB–VIIIB labels). Elements of a group have the same number of electrons in their valence shell, in the same kind of orbitals, and so similar chemistry. Some groups have family names: group 1 the alkali metals, group 2 the alkaline earth metals, group 15 the pnictogens, group 16 the chalcogens, group 17 the halogens, group 18 the noble gases.
Why the periods have 2, 8, 8, 18, 18, 32, 32 elements. A period contains one element for each electron that can enter the subshells filled during it, i.e. twice the number of orbitals in those subshells. Following the Aufbau order $1s\,2s\,2p\,3s\,3p\,4s\,3d\,4p\,5s\,4d\,5p\,6s\,4f\,5d\,6p\,7s\,5f\,6d\,7p$:
| Period ($n$) | Subshells filled | Orbitals | Elements | From – to |
|---|---|---|---|---|
| 1 | $1s$ | 1 | 2 | H ($Z=1$) – He ($2$) |
| 2 | $2s,\ 2p$ | $1+3=4$ | 8 | Li ($3$) – Ne ($10$) |
| 3 | $3s,\ 3p$ | $4$ | 8 | Na ($11$) – Ar ($18$) |
| 4 | $4s,\ 3d,\ 4p$ | $1+5+3=9$ | 18 | K ($19$) – Kr ($36$) |
| 5 | $5s,\ 4d,\ 5p$ | $9$ | 18 | Rb ($37$) – Xe ($54$) |
| 6 | $6s,\ 4f,\ 5d,\ 6p$ | $1+7+5+3=16$ | 32 | Cs ($55$) – Rn ($86$) |
| 7 | $7s,\ 5f,\ 6d,\ 7p$ | $16$ | 32 | Fr ($87$) – Og ($118$) |
Period 3 has only 8 elements although the third shell can hold 18: the $3d$ orbitals lie above $4s$ in energy, so they fill only in period 4, after potassium and calcium. Likewise the $4f$ orbitals fill in period 6. To keep the table a convenient width, the 14 elements of each $f$ series (lanthanoids in period 6, actinoids in period 7) are printed in two separate rows at the foot of the table; they really belong inside periods 6 and 7, after lanthanum and actinium in group 3.
Mendeleev placed tellurium (atomic mass $127.6$) before iodine ($126.9$), against the order of atomic mass. In the modern periodic table this order is
Electronic configuration and the s, p, d and f blocks
Read the long-form table with the Aufbau order in mind and it splits into four rectangular regions. In each region the electron that distinguishes an element from the one before it (the differentiating electron) enters the same type of subshell.
The block of an element is the type of subshell ($s$, $p$, $d$ or $f$) into which its differentiating electron enters in the Aufbau order.
- s-block: groups 1 and 2; valence configuration $ns^{1}$ or $ns^{2}$. (Helium, $1s^{2}$, is an s-configuration but is placed in group 18 because its shell is complete.)
- p-block: groups 13 to 18; valence configuration $ns^{2}np^{1}$ to $ns^{2}np^{6}$.
- d-block: groups 3 to 12; general configuration $(n-1)d^{1-10}\,ns^{0-2}$ (usually $ns^{2}$; $ns^{1}$ in Cr, Cu and some heavier elements; $5s^{0}$ in Pd). Four series: $3d$ (Sc–Zn), $4d$ (Y–Cd), $5d$ (La, Hf–Hg), $6d$ (Ac, Rf–Cn).
- f-block: the two rows printed below the table — the lanthanoids Ce–Lu ($Z=58$–$71$, filling $4f$) and the actinoids Th–Lr ($Z=90$–$103$, filling $5f$); general configuration $(n-2)f^{1-14}\,(n-1)d^{0-1}\,ns^{2}$.
The s- and p-block elements together are the representative (main-group) elements; the d-block elements are the transition elements and the f-block elements the inner transition elements. The noble gases ($ns^{2}np^{6}$, and He $1s^{2}$) close each period.
How the blocks behave. The block is a strong hint about chemistry, because it tells you what kind of electrons are available for bonding:
- s-block: reactive metals with one or two loosely held electrons; they lose them to form $\mathrm{M^{+}}$ or $\mathrm{M^{2+}}$ ions, make mostly ionic compounds (lithium and beryllium are partial exceptions) and basic oxides and hydroxides. Reactivity increases down each group.
- p-block: the most varied block — metals at the bottom left (Al, Sn, Pb, Bi), metalloids along a diagonal, non-metals at the top right, the noble gases at the end. Many elements show several oxidation states, and their oxides range from basic through amphoteric to strongly acidic.
- d-block: all metals — hard, high-melting, good conductors — with variable oxidation states, coloured and often paramagnetic ions and catalytic activity, all because the $(n-1)d$ electrons are close in energy to the $ns$ electrons. Zn, Cd and Hg (group 12), with a full $d^{10}$ subshell in the atom and the common ions, are less typical. Chapter 11 treats this block fully.
- f-block: metals; the lanthanoids are so alike chemically (mostly $+3$) that they are hard to separate; the actinoids are all radioactive, and the elements after uranium are made artificially.
Hydrogen ($1s^{1}$) has one valence electron like the alkali metals but is also one electron short of a noble-gas shell, like the halogens; it forms $\mathrm{H^{+}}$ (in water, $\mathrm{H_{3}O^{+}}$) as well as the hydride ion $\mathrm{H^{-}}$ and is a diatomic non-metal gas. It is usually printed at the top of group 1, but it is really a family of its own.
In the table builder, slide $Z$ from $20$ (calcium) to $21$ (scandium). Where does the new electron go, and in which block does the new cell light up?
Zinc has the configuration $\mathrm{[Ar]}\,3d^{10}4s^{2}$; its outermost shell holds only $4s$ electrons. Zinc belongs to the
Locating an element; names for elements beyond Z = 100
Because the table is the Aufbau order, the position of an element can be read straight off its configuration — or, even faster, off its atomic number.
For an element with ground-state configuration written out in full:
- Period $=$ the principal quantum number $n$ of the valence shell (the largest $n$ in the configuration; for palladium, $\mathrm{[Kr]}\,4d^{10}$, it is the period in which the $5s$ subshell is being filled, i.e. 5).
- Block $=$ the subshell receiving the differentiating electron.
- Group:
- s-block: group $=$ number of $ns$ electrons (1 or 2);
- d-block: group $=$ number of $(n-1)d$ electrons $+$ number of $ns$ electrons;
- p-block: group $=10+$ number of $ns$ electrons $+$ number of $np$ electrons $=12+$ number of $np$ electrons;
- f-block: the lanthanoids and actinoids are placed with group 3 (in the separate rows).
From the atomic number. Find the noble gases on either side: if $Z_\text{prev}\lt Z\le Z_\text{next}$, the element is in the period that ends at $Z_\text{next}$, and it is the $k$th element of that period with $k=Z-Z_\text{prev}$. Then group $=k$ for $k\le2$; group $=k+10$ for $k\ge3$ in periods 2 and 3; group $=k$ in periods 4 and 5; and in periods 6 and 7, group $=3$ for $k=3$, f-block for $k=4$ to $17$, group $=k-14$ for $k\ge18$.
The d-block rule works even for the "exceptional" configurations: chromium, $\mathrm{[Ar]}\,3d^{5}4s^{1}$, and the configuration Aufbau would predict, $3d^{4}4s^{2}$, both give $5+1=4+2=6$. Only the total of $(n-1)d$ and $ns$ electrons matters.
- Given $Z$: bracket it between noble gases ($2, 10, 18, 36, 54, 86, 118$) to get the period and the position $k$ in the period; convert $k$ to a group with Rule 9.2.
- Given a configuration: period from the highest $n$; block from the last subshell filled in the Aufbau order; group from the electron count of that block's rule.
- Given period and group (reverse): $Z=Z_\text{prev}+k$, where $k=$ group (s-block, and periods 4–5), $k=$ group $-10$ (p-block of periods 2–3), $k=$ group $+14$ (groups 4–18 of periods 6–7).
- Check by counting electrons, and remember the special cases: He (group 18), Pd (period 5 with no $5s$ electron), La/Ac (group 3, d-block).
Naming the superheavy elements. Elements beyond $Z=100$ are made a few atoms at a time in particle accelerators, and claims of discovery may take years to confirm. Until IUPAC approves a permanent name, an element is known by a systematic (temporary) name built directly from its atomic number.
Write each digit of $Z$ as a numerical root, in order, and add the ending -ium:
| Digit | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
|---|---|---|---|---|---|---|---|---|---|---|
| Root | nil | un | bi | tri | quad | pent | hex | sept | oct | enn |
| Letter | n | u | b | t | q | p | h | s | o | e |
The symbol is made of the first letters of the roots, the first one capitalised (three letters for $Z=100$–$999$). Two spellings are trimmed: the final "n" of enn is dropped before nil ("ennil", not "ennnil"), and the final "i" of bi or tri is dropped before -ium ("bium", "trium").
| $Z$ | Systematic name | Symbol | Approved name | $Z$ | Systematic name | Symbol | Approved name |
|---|---|---|---|---|---|---|---|
| 101 | Unnilunium | Unu | Mendelevium, Md | 110 | Ununnilium | Uun | Darmstadtium, Ds |
| 102 | Unnilbium | Unb | Nobelium, No | 111 | Unununium | Uuu | Roentgenium, Rg |
| 103 | Unniltrium | Unt | Lawrencium, Lr | 112 | Ununbium | Uub | Copernicium, Cn |
| 104 | Unnilquadium | Unq | Rutherfordium, Rf | 113 | Ununtrium | Uut | Nihonium, Nh |
| 105 | Unnilpentium | Unp | Dubnium, Db | 114 | Ununquadium | Uuq | Flerovium, Fl |
| 106 | Unnilhexium | Unh | Seaborgium, Sg | 115 | Ununpentium | Uup | Moscovium, Mc |
| 107 | Unnilseptium | Uns | Bohrium, Bh | 116 | Ununhexium | Uuh | Livermorium, Lv |
| 108 | Unniloctium | Uno | Hassium, Hs | 117 | Ununseptium | Uus | Tennessine, Ts |
| 109 | Unnilennium | Une | Meitnerium, Mt | 118 | Ununoctium | Uuo | Oganesson, Og |
All elements up to $Z=118$ now have approved names, and the seventh period is complete. The systematic names are still asked about in JEE Main, and they are what any element from $Z=119$ onwards will be called first.
An element has the configuration $\mathrm{[Ar]}\,3d^{10}4s^{2}4p^{4}$. Its group number is
Metals, non-metals and metalloids
A glance at the table coloured by type shows another pattern: metals on the left and at the bottom, non-metals at the top right, and a narrow diagonal band of in-between elements separating them.
Metals — about four-fifths of all elements — are lustrous, good conductors of heat and electricity, malleable and ductile, and (except mercury) solid at room temperature; gallium and caesium melt just above it ($303\ \mathrm{K}$ and $302\ \mathrm{K}$). Chemically they tend to lose electrons, forming cations and basic oxides. All s-block (except hydrogen), d-block and f-block elements are metals, and so are the heavier members of groups 13–15.
Non-metals are usually gases or brittle solids (bromine is the only liquid), are poor conductors, and tend to gain or share electrons, forming anions and acidic oxides. They lie at the top right of the p-block, together with hydrogen.
Metalloids (semi-metals) have properties between the two — they look somewhat metallic, are semiconductors, and form oxides that are amphoteric or weakly acidic. The usual list is boron, silicon, germanium, arsenic, antimony and tellurium; they lie along the zigzag line from boron down to tellurium (polonium and astatine are sometimes added).
The trend behind the pattern. Metallic character — the ease of losing electrons — decreases across a period (the nuclear charge felt by the valence electrons grows) and increases down a group (the valence electrons are farther from the nucleus). So the most metallic elements sit at the bottom left (Cs, Fr) and the most non-metallic at the top right (F, O), and the boundary between the two runs diagonally. Group 14 shows the whole range in one column: carbon is a non-metal, silicon and germanium are metalloids, tin and lead are metals. Group 15 does the same: N and P non-metals, As and Sb metalloids, Bi a metal. Section 9.2 explains these trends in terms of ionisation enthalpy and electronegativity.
In the configuration decoder set $n=4$, $ns=1$, $(n-1)d=10$ and $np=0$. What will the decoder report?
1. Old group numbers. In the 1–18 numbering a p-block group is $10+(\text{valence electrons})$: oxygen ($2s^{2}2p^{4}$) is in group 16, not 6; aluminium in group 13, not 3. Only for the s-block does the group equal the number of valence electrons.
2. Block from the outer shell instead of the last-filled subshell. Zn ($\mathrm{[Ar]}\,3d^{10}4s^{2}$) is d-block (group 12), not s-block; He ($1s^{2}$) has an s configuration but sits in group 18; La and Ac are d-block (group 3) while the f-block rows are Ce–Lu and Th–Lr.
3. Period from the highest $n$ — with one famous exception. Palladium is $\mathrm{[Kr]}\,4d^{10}$, with no $n=5$ electron, yet it is in period 5. When in doubt, place the element by $Z$ between noble gases.
4. Forgetting the 14 f-block elements. In periods 6 and 7, $Z=Z_\text{prev}+\text{group}+14$ for groups 4–18. Hafnium is $54+4+14=72$, not $58$.
5. IUPAC spellings and symbols. 109 is Unnilennium (Une), 190 Unennilium (one "n" dropped before nil), 112 Ununbium ("bium", not "biium"). The symbol always has the first letter of every root: 104 is Unq, not Uq.
Which statement about metallic character is correct?
Exercises
Use the Aufbau order and the noble-gas atomic numbers; groups are numbered 1–18. Answer boxes accept the number only.
- 1 State the modern periodic law and explain, using Moseley's work, why atomic number rather than atomic mass is the basis of the table.
- 2 Argon ($39.9\ \mathrm{u}$) comes before potassium ($39.1\ \mathrm{u}$) in the table. Show that this is the natural order under the modern law and explain why it would be wrong to swap them.
- 3 How many elements does period 4 contain? Name the subshells that are filled in it.
- 4 How many elements does period 6 contain? Show the count from the orbitals filled.
- 5 Find the atomic number of the noble gas that ends period 5.
- 6 Why does period 3 contain only 8 elements although the third shell can hold 18 electrons?
- 7 How many elements make up the d-block part of period 4? Name the first and the last.
- 8 Give the family names of groups 1, 2, 16, 17 and 18, with one example from period 3 for each (where one exists).
- 1 Write the ground-state configurations of the elements with $Z=19$, $24$ and $35$ and name the block of each.
- 2 Name the block of the elements with $Z=2$, $30$, $57$ and $92$, explaining any that might surprise you.
- 3 Write the general valence configurations of p-block and d-block elements.
- 4 How many unpaired electrons are there in an atom of the element with $Z=26$?
- 5 How many electrons occupy the $3d$ subshell of the element with $Z=29$?
- 6 How many elements of period 4 have exactly one electron in the $4s$ subshell in the ground state?
- 7 Which subshells are being filled in the lanthanoids and in the actinoids? Why are these elements printed in separate rows?
- 8 Give one argument for placing hydrogen in group 1 and one for placing it with the halogens.
- 1 Find the period, block and group of the element $1s^{2}2s^{2}2p^{6}3s^{2}3p^{3}$ and name it.
- 2 Find the period, block and group of $\mathrm{[Kr]}\,4d^{10}5s^{2}5p^{5}$ and name it.
- 3 Find the group of $\mathrm{[Ar]}\,3d^{7}4s^{2}$ and name the element.
- 4 Find the period and group of $\mathrm{[Xe]}\,4f^{14}5d^{6}6s^{2}$.
- 5 Find the period, group and block of $\mathrm{[Rn]}\,7s^{1}$ and name it.
- 6 Find the atomic number of the element in period 4, group 14.
- 7 Find the atomic number of the element in period 6, group 11.
- 8 A metal ion $\mathrm{M^{2+}}$ has the configuration $\mathrm{[Ar]}\,3d^{5}$. Find the atomic number of M, its period and its group.
- 1 Give the IUPAC systematic names and symbols of the elements with $Z=107$, $113$ and $120$.
- 2 What is the atomic number of "unbiunium"?
- 3 Element 119 has not yet been made. Predict its period, group and block, and the formula of its oxide.
- 4 Write the systematic name and symbol of the element with $Z=190$.
- 5 Classify Na, Si, S, As, Ca, Br, Ge and Te as metals, non-metals or metalloids. How many of them are metalloids?
- 6 Describe how the metallic character changes down group 14 from carbon to lead, naming the type of each element.
- 7 An element of period 4 belongs to the p-block and its atom has two unpaired electrons. There are two possibilities. Find the sum of their atomic numbers.
- 8 (Modelling) Researchers attempting to make element 120 expect it to behave like radium. In which group should it be placed? Give two properties you would expect it to have.
E1. JEE Main · MCQ The IUPAC systematic name of the element with atomic number 114 and its position in the periodic table are (A) Unnilquadium; group 4, period 7 (B) Ununquadium; group 14, period 7 (C) Ununquadium; group 4, period 7 (D) Ununquadium; group 14, period 6
E2. JEE Main · Numerical An element lies in period 5, and in its ground state its atom has three unpaired electrons, all in the $p$ subshell of the valence shell. Find its atomic number. Give the answer to the nearest integer.
E3. JEE Main · MCQ An element has the ground-state configuration $\mathrm{[Kr]}\,4d^{10}5s^{2}5p^{1}$. It is placed in (A) period 4, group 13 (B) period 5, group 3 (C) period 5, group 1 (D) period 5, group 13
E4. JEE Main · Numerical For the element with atomic number 46, find the sum of its group number and its period number. Give the answer to the nearest integer.
E5. JEE Main · MCQ Which set contains only metalloids? (A) B, Si, As, Te (B) B, Al, Ga, In (C) Si, P, S, Cl (D) Ge, Sn, Pb, Bi
E6. JEE Main · Numerical How many of the following elements belong to the d-block: Zn, Ga, La, Ce, Hg, Ag, Al, Sc, U? Give the answer to the nearest integer.
Research question. Does the periodic law really hold for a measured physical property? Plot one property of the first 56 elements against atomic number and test whether its peaks and troughs fall at the same places in every period.
Why it matters. Lothar Meyer's curve of atomic volume against mass was one of the first pieces of evidence for periodicity, and the same kind of plot is still used today: materials scientists screening thousands of compounds by computer (in battery, catalyst and semiconductor research) use the position of each element in the table as an input feature, precisely because so many properties repeat with the period. Seeing the pattern emerge from raw data is the best way to understand why the table works.
What to do.
- From an open data source (for example the IUPAC or a national standards body's data pages, or a reputable online periodic table) collect, for $Z=1$ to $56$, the melting point and the density of each element in its standard state. Note which values are missing or estimated.
- Compute the molar volume $V_{m}=M/\rho$ (in $\mathrm{cm^{3}\,mol^{-1}}$) for the solid elements.
- Plot $V_{m}$ against $Z$ and, on a second graph, the melting point against $Z$. Mark the noble gases and the alkali metals.
- Check where the maxima of $V_{m}$ fall (expect the alkali metals) and where the melting point peaks (expect the middle of each period: C, Si, and the d-block metals).
- Explain one striking feature in terms of bonding or configuration — for example, why the melting point jumps at carbon and falls to nitrogen.
Tools: A spreadsheet or Python with a plotting library; an open, citable periodic-table data source.
Hand in: Your two plots with the periods marked, a table of the data you used with its source, and one page interpreting the repeating pattern and any element that breaks it.
Going further. Repeat the molar-volume plot against atomic mass instead of $Z$ for the region Ar–K and Te–I. Does the pattern become less regular, as the modern periodic law predicts?
🧪 Self-check quiz
Q1. The modern periodic law states that the properties of the elements are periodic functions of their
Q2. The element with the configuration $\mathrm{[Ar]}\,3d^{10}4s^{1}$ is placed in
Q3. How many elements are there in the fifth period?
Q4. The IUPAC systematic symbol of the element with atomic number 106 is
Q5. Which of these elements is a metalloid?