9.2 Periodic Trends in Properties
Across a period the pull of the nucleus on the outer electrons grows; down a group the outer shell moves farther out. These two facts explain atomic and ionic radii, ionisation enthalpy, electron gain enthalpy, electronegativity, valence, reactivity and the nature of oxides — and the famous exceptions that JEE Main loves.
Drop a pea-sized piece of sodium into water and it races round the surface, fizzing and melting; potassium bursts into a lilac flame; caesium explodes. Magnesium, next to sodium in the same period, barely reacts with cold water at all. Fluorine attacks almost everything, even glass and some noble gases, yet it is chlorine — not fluorine — that releases the most energy when its atom gains an electron. Why do properties change so smoothly in some places and jump in others?
All of these facts follow from one picture: how strongly the nucleus holds the outermost electrons. In Section 9.1 we saw that the table is the Aufbau order drawn as a map. In this section we follow what happens to the size of atoms and ions, to the energy needed to remove an electron (ionisation enthalpy) and the energy released when one is added (electron gain enthalpy), to electronegativity, and finally to valence, reactivity and the acidic or basic nature of oxides, as we move along the periods and down the groups. We use the configurations, shielding and penetration of Section 2.4, the hydrogen energy levels of Section 2.2 and the electronegativity scale of Section 3.2.
Effective nuclear charge, atomic and ionic radii
An outer electron is attracted by the nucleus (charge $+Ze$) and repelled by every other electron. The inner electrons sit, on average, between it and the nucleus and cancel part of the nuclear attraction. The outer electron therefore behaves as if it were attracted by a smaller, effective charge.
The shielding (screening) effect is the reduction of the nuclear attraction on an electron by the other electrons of the atom, chiefly those in inner shells. The effective nuclear charge felt by the electron is
$$Z_\text{eff}=Z-\sigma ,$$where $\sigma$ is the shielding constant. Inner-shell electrons shield an outer electron strongly; electrons in the same shell shield each other only weakly. Within a shell, shielding power falls in the order $s\gt p\gt d\gt f$, because $s$ electrons penetrate closest to the nucleus and $d$ and $f$ electrons are spread out and penetrate least.
The two basic trends. Across a period ($\mathrm{Li\rightarrow Ne}$) each step adds one proton and one electron to the same shell. The added electron shields its shell-mates only a little, so $Z_\text{eff}$ on the valence electrons rises steadily — roughly by $0.65$ per step. Down a group ($\mathrm{Li\rightarrow Na\rightarrow K}$) a whole new inner shell is added each time; the extra protons are almost exactly cancelled by the extra shielding electrons, so $Z_\text{eff}$ on the valence electron changes little, but the electron sits in a shell with larger $n$, much farther from the nucleus.
Slater's rules are not in the JEE Main 2026 list; they are shown here only to put numbers on the qualitative picture. Nothing in this box is needed for the exercises, the Exam corner or the quiz.
Group the orbitals as $(1s)(2s,2p)(3s,3p)(3d)(4s,4p)(4d)(4f)(5s,5p)\dots$ For an electron in an $(ns,np)$ group, each other electron in the same group contributes $0.35$ to $\sigma$ ($0.30$ within $1s$), each electron in shell $n-1$ contributes $0.85$, and each electron deeper inside contributes $1.00$. (For a $d$ or $f$ electron, everything to its left contributes $1.00$.) Sodium's $3s$ electron: $\sigma=8(0.85)+2(1.00)=8.8$, so $Z_\text{eff}=11-8.8=2.2$. Chlorine's $3p$ electron: $\sigma=6(0.35)+8(0.85)+2(1.00)=10.9$, $Z_\text{eff}=6.1$ — almost three times sodium's, in the same shell. Potassium's $4s$ electron: $\sigma=8(0.85)+10(1.00)=16.8$, $Z_\text{eff}=2.2$ — the same as sodium's, but one shell farther out.
Atoms have no sharp edge — the electron cloud fades out gradually — so an "atomic radius" has to be defined from a measurable distance between nuclei. Three definitions are used, depending on how the atoms are held together.
- The covalent radius of an element is half the distance between the nuclei of two identical atoms joined by a single covalent bond. For $\mathrm{Cl_{2}}$ the bond length is $198\ \mathrm{pm}$, so $r_\text{cov}(\mathrm{Cl})=99\ \mathrm{pm}$.
- The metallic radius is half the distance between the nuclei of two neighbouring atoms in a metallic crystal. In copper the nearest neighbours are $256\ \mathrm{pm}$ apart, so $r_\text{met}(\mathrm{Cu})=128\ \mathrm{pm}$.
- The van der Waals radius is half the distance between the nuclei of two identical atoms of neighbouring molecules that touch but are not bonded (closest approach in the solid). It is the only radius available for the noble gases.
For the same element $r_\text{vdW}\gt r_\text{cov}$ (for chlorine about $175$–$180\ \mathrm{pm}$ against $99\ \mathrm{pm}$): bonded atoms overlap their clouds, non-bonded ones only touch. "Atomic radius" in a table means the covalent radius for non-metals and the metallic radius for metals.
- Across a period the atomic radius decreases (alkali metal largest, halogen smallest): the valence shell stays the same while $Z_\text{eff}$ increases, pulling it in.
- Down a group the atomic radius increases: each step adds a shell with larger $n$, and $Z_\text{eff}$ hardly changes.
- The noble gases appear larger than the halogens before them only because their radii are van der Waals radii; like must be compared with like.
- Where a filled $d$ or $f$ subshell has just been inserted, the increase down a group is smaller than expected (those electrons shield poorly): gallium ($135\ \mathrm{pm}$) is slightly smaller than aluminium ($143\ \mathrm{pm}$).
| Period 2 | Li | Be | B | C | N | O | F |
|---|---|---|---|---|---|---|---|
| $r$ / pm | 152 | 111 | 88 | 77 | 74 | 66 | 64 |
| Period 3 | Na | Mg | Al | Si | P | S | Cl |
| $r$ / pm | 186 | 160 | 143 | 117 | 110 | 104 | 99 |
| Group 1 | Li 152 | Na 186 | K 231 | Rb 244 | Cs 262 | ||
| Group 17 | F 64 | Cl 99 | Br 114 | I 133 |
Ions. A cation is always smaller than its parent atom: it has fewer electrons attracted by the same nucleus, so each feels a larger effective charge — and often a whole shell has gone ($\mathrm{Na}$ $186\ \mathrm{pm}$, $\mathrm{Na^{+}}$ $102\ \mathrm{pm}$). An anion is always larger than its parent atom: the extra electrons repel one another and the same nuclear charge holds more electrons ($\mathrm{Cl}$ $99\ \mathrm{pm}$, $\mathrm{Cl^{-}}$ $181\ \mathrm{pm}$). For one element, the higher the positive charge, the smaller the ion: $r(\mathrm{Fe})\gt r(\mathrm{Fe^{2+}})\gt r(\mathrm{Fe^{3+}})$.
The ionic radius of an ion is its share of the distance between the nuclei of a cation and an anion in contact in an ionic crystal. Atoms and ions that have the same number of electrons are isoelectronic species, e.g. $\mathrm{N^{3-}}$, $\mathrm{O^{2-}}$, $\mathrm{F^{-}}$, Ne, $\mathrm{Na^{+}}$, $\mathrm{Mg^{2+}}$, $\mathrm{Al^{3+}}$ (all with 10 electrons, $1s^{2}2s^{2}2p^{6}$).
In an isoelectronic series the electron cloud is the same, so the size is decided by the nuclear charge alone: the larger $Z$, the smaller the species. In practice the radius falls steadily as the ratio $Z/(\text{number of electrons})$ rises:
$$\mathrm{N^{3-}}\,(171)\gt\mathrm{O^{2-}}\,(140)\gt\mathrm{F^{-}}\,(133)\gt\mathrm{Na^{+}}\,(102)\gt\mathrm{Mg^{2+}}\,(72)\gt\mathrm{Al^{3+}}\,(54)\ \ \mathrm{pm}$$ $$\mathrm{S^{2-}}\,(184)\gt\mathrm{Cl^{-}}\,(181)\gt\mathrm{K^{+}}\,(138)\gt\mathrm{Ca^{2+}}\,(100)\ \ \mathrm{pm}$$Which of the following species is the smallest: $\mathrm{Na^{+}}$, $\mathrm{Mg^{2+}}$, $\mathrm{F^{-}}$, $\mathrm{Al^{3+}}$?
Ionisation enthalpy
How tightly an atom holds its outermost electron is measured directly by the energy needed to pull that electron off. Because the measurement is made on isolated atoms, it reveals the atom's own grip on its electrons, free from the effects of bonding.
The first ionisation enthalpy $\Delta_{i}H_{1}$ of an element is the enthalpy change when one mole of its isolated gaseous atoms in the ground state each lose their most loosely held electron:
$$\mathrm{M(g)\rightarrow M^{+}(g)+e^{-}}\qquad \Delta_{i}H_{1}$$The second ionisation enthalpy refers to $\mathrm{M^{+}(g)\rightarrow M^{2+}(g)+e^{-}}$, and so on. Ionisation enthalpies are always positive (energy must be supplied), and each successive value is larger than the one before: $\Delta_{i}H_{1}\lt\Delta_{i}H_{2}\lt\Delta_{i}H_{3}\dots$, because the electron is removed from an increasingly positive ion that is also smaller. They are given in $\mathrm{kJ\,mol^{-1}}$, or per atom in electronvolts: $1\ \mathrm{eV}$ per atom $=96.5\ \mathrm{kJ\,mol^{-1}}$. (The ionisation energy, defined at $0\ \mathrm{K}$, differs from the enthalpy by only a few $\mathrm{kJ\,mol^{-1}}$.)
The ionisation enthalpy is larger when (i) the nuclear charge is larger, (ii) the atom is smaller, (iii) the inner electrons shield less, (iv) the electron removed comes from a more penetrating subshell ($s\gt p\gt d\gt f$), and (v) the configuration being broken up is especially stable (noble-gas, completely filled or half-filled subshells).
- Across a period $\Delta_{i}H_{1}$ generally increases (rising $Z_\text{eff}$, falling radius): alkali metals have the lowest values of their period and noble gases the highest.
- Down a group $\Delta_{i}H_{1}$ generally decreases (larger atoms; the outer electron is farther away and better shielded).
- Exceptions across a period: $\Delta_{i}H_{1}(\mathrm{Be})\gt\Delta_{i}H_{1}(\mathrm{B})$ and $\mathrm{Mg}\gt\mathrm{Al}$ (a $2p$/$3p$ electron is easier to remove than a penetrating $s$ electron); $\Delta_{i}H_{1}(\mathrm{N})\gt\Delta_{i}H_{1}(\mathrm{O})$ and $\mathrm{P}\gt\mathrm{S}$ (O and S lose one of a paired $p$ electrons, pushed out by repulsion; N and P keep a half-filled $p^{3}$).
- Exceptions down group 13: $\mathrm{Ga}\ (579)\approx\mathrm{Al}\ (577)$ and $\mathrm{Tl}\ (589)\gt\mathrm{In}\ (558)$, because the filled $3d$ (and, for Tl, $4f$ and $5d$) electrons shield poorly.
| Period 2 | Li | Be | B | C | N | O | F | Ne |
|---|---|---|---|---|---|---|---|---|
| $\Delta_{i}H_{1}$ / $\mathrm{kJ\,mol^{-1}}$ | 520 | 899 | 801 | 1086 | 1402 | 1314 | 1681 | 2080 |
| Period 3 | Na | Mg | Al | Si | P | S | Cl | Ar |
| $\Delta_{i}H_{1}$ / $\mathrm{kJ\,mol^{-1}}$ | 496 | 738 | 577 | 786 | 1012 | 1000 | 1251 | 1521 |
| Group 1 | Li 520 | Na 496 | K 419 | Rb 403 | Cs 376 |
So the full order for period 2 is $\mathrm{Li\lt B\lt Be\lt C\lt O\lt N\lt F\lt Ne}$ — the single most-asked ordering in this topic.
Successive ionisation enthalpies reveal the valence shell. Removing electrons one by one, each step costs a little more than the last — until the next electron has to come from the noble-gas core. Then the cost jumps by a factor of five, ten or more, because that electron is in a lower shell, much closer to the nucleus and far less shielded. For magnesium: $738,\ 1451,\ 7733\ \mathrm{kJ\,mol^{-1}}$ — the jump after the second electron shows that Mg has two valence electrons and forms $\mathrm{Mg^{2+}}$, never $\mathrm{Mg^{3+}}$. In the same way the second ionisation enthalpy of sodium ($4562$) is far larger than that of magnesium ($1451$): $\mathrm{Na^{+}}$ already has the neon configuration.
Light that ionises. A photon can ionise an atom if its energy is at least the ionisation energy per atom, $\dfrac{hc}{\lambda}\ge\dfrac{\Delta_{i}H}{N_{A}}$. The longest wavelength that can do it is therefore
$$\lambda_{\max}=\frac{hc\,N_{A}}{\Delta_{i}H}.$$For hydrogen-like species (one electron) the Bohr result of Section 2.2 gives the ionisation enthalpy exactly: $\Delta_{i}H=1312\,Z^{2}\ \mathrm{kJ\,mol^{-1}}$, so for $\mathrm{He^{+}}$ it is $5248$ and for $\mathrm{Li^{2+}}$ $11\,808\ \mathrm{kJ\,mol^{-1}}$.
In the ionisation lab choose magnesium and step the slider to 3 electrons removed. Where is the big jump, and how large is it?
The first ionisation enthalpy of oxygen ($1314\ \mathrm{kJ\,mol^{-1}}$) is lower than that of nitrogen ($1402\ \mathrm{kJ\,mol^{-1}}$) because
Electron gain enthalpy and electronegativity
The reverse question — how much energy is released when a neutral atom accepts an electron — measures how strongly an atom attracts an extra electron, and it decides which elements form anions readily.
The electron gain enthalpy $\Delta_{eg}H$ of an element is the enthalpy change when one mole of its isolated gaseous atoms each gain an electron:
$$\mathrm{X(g)+e^{-}\rightarrow X^{-}(g)}\qquad \Delta_{eg}H$$It is negative when energy is released (exothermic: the anion is lower in energy than the atom and the free electron) and positive when energy must be supplied. The older term electron affinity $A_{e}$ is the energy released, so $A_{e}\approx-\Delta_{eg}H$: a "large electron affinity" means a large negative electron gain enthalpy. The second electron gain enthalpy, $\mathrm{X^{-}(g)+e^{-}\rightarrow X^{2-}(g)}$, is always positive, because the electron is pushed onto an ion that already repels it ($\Delta_{eg}H_{2}(\mathrm{O})\approx+798\ \mathrm{kJ\,mol^{-1}}$).
- Across a period $\Delta_{eg}H$ generally becomes more negative, reaching the halogens, whose $ns^{2}np^{5}$ needs one electron for a noble-gas shell: the halogens have the most negative values of their periods.
- Down a group it generally becomes less negative: the added electron goes into a larger shell, farther from the nucleus.
- Positive or near zero: the noble gases (large positive values: the electron must start a new shell — Ne $+116$, Ar $+96$); Be and Mg (filled $ns^{2}$: the electron must enter $np$); nitrogen (half-filled $2p^{3}$, close to zero).
- The second-period anomaly: $\Delta_{eg}H$ of the second-period element is less negative than that of the element below it: $\mathrm{Cl}\ (-349)$ is more negative than $\mathrm{F}\ (-328)$, $\mathrm{S}\ (-200)$ more than $\mathrm{O}\ (-141)$, $\mathrm{P}\ (-72)$ more than N. The $n=2$ shell is so compact that an incoming electron is strongly repelled by the electrons already there; in the larger $n=3$ shell the repulsion is much weaker.
| Element | H | Li | Na | K | C | O | S | F | Cl | Br | I | Ne | Ar |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| $\Delta_{eg}H$ / $\mathrm{kJ\,mol^{-1}}$ | −73 | −60 | −53 | −48 | −122 | −141 | −200 | −328 | −349 | −325 | −295 | +116 | +96 |
So the halogen order (most negative first) is $\mathrm{Cl\gt F\gt Br\gt I}$, and chlorine has the most negative electron gain enthalpy of all the elements.
Electronegativity. Electronegativity — the pull of an atom in a molecule on a shared electron pair — was defined in Section 3.2 (Definition 3.7). It is not a measured energy of an isolated atom, but it tracks the same underlying quantity, the effective nuclear charge felt at the bonding distance. Atoms that hold their own electrons tightly (high $\Delta_{i}H$) and attract extra ones strongly (negative $\Delta_{eg}H$) are also electronegative. Electronegativity increases across a period and decreases down a group, without the second-period anomaly: fluorine ($4.0$) is the most electronegative element, followed by O ($3.5$), then N and Cl ($3.0$); caesium ($0.7$) is among the least. In a bond the shared pair lies between two nuclei, and the crowding that hinders electron gain by a free fluorine atom matters far less; fluorine's small size and high $Z_\text{eff}$ then win, so fluorine tops the electronegativity scale although chlorine has the more negative electron gain enthalpy.
Electronegativity is the link to everything that follows: elements of low electronegativity (bottom left) lose electrons and are metallic; elements of high electronegativity (top right) gain electrons and are non-metallic.
In the trend explorer choose "first ionisation enthalpy" and "Period 2". Moving one element to the right at a time, how many times does the bar get shorter?
Fluorine is more electronegative than chlorine, yet chlorine's electron gain enthalpy is more negative. The best explanation is that
Valence, oxidation states, reactivity and the nature of oxides
The trends in size and in the energies of losing and gaining electrons now explain the chemistry: how many bonds an atom forms, which oxidation states it shows, how reactive it is, and whether its oxide is an acid or a base.
The valence of an element is its combining capacity — the number of hydrogen atoms (or chlorine atoms, or twice the number of oxygen atoms) one atom of it combines with. For the representative elements the usual valence is the number of valence electrons for groups 1, 2, 13 and 14, and $8$ minus the number of valence electrons for groups 15 to 18. The oxidation state (oxidation number, Section 7.1) is the charge an atom would carry if all its bonds were ionic; the more electronegative partner is given the negative value. The highest oxidation state of a representative element equals the number of its valence electrons (the group number for groups 1–2, group $-10$ for groups 13–17).
| Period 3 | Na | Mg | Al | Si | P | S | Cl |
|---|---|---|---|---|---|---|---|
| Valence electrons | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
| Hydride (valence) | $\mathrm{NaH}$ (1) | $\mathrm{MgH_{2}}$ (2) | $\mathrm{AlH_{3}}$ (3) | $\mathrm{SiH_{4}}$ (4) | $\mathrm{PH_{3}}$ (3) | $\mathrm{H_{2}S}$ (2) | $\mathrm{HCl}$ (1) |
| Highest oxide | $\mathrm{Na_{2}O}$ | $\mathrm{MgO}$ | $\mathrm{Al_{2}O_{3}}$ | $\mathrm{SiO_{2}}$ | $\mathrm{P_{4}O_{10}}$ | $\mathrm{SO_{3}}$ | $\mathrm{Cl_{2}O_{7}}$ |
| Oxidation state | +1 | +2 | +3 | +4 | +5 | +6 | +7 |
| Nature of oxide | strongly basic | basic | amphoteric | weakly acidic | acidic | acidic | strongly acidic |
Valence towards hydrogen rises to 4 and falls again, while the highest oxidation state towards oxygen rises steadily to 7 — oxygen, being more electronegative, can draw out every valence electron. With very electronegative partners an element can show an unusual sign: in $\mathrm{OF_{2}}$ oxygen is $+2$, because fluorine is the more electronegative. Down groups 13–15 the lower oxidation state (two less than the group maximum) becomes increasingly stable — $\mathrm{Tl^{+}}$, $\mathrm{Pb^{2+}}$, $\mathrm{Bi^{3+}}$ — a trend treated in Chapter 10. Transition and inner transition elements show several oxidation states, because their $(n-1)d$ or $(n-2)f$ electrons lie close in energy to the $ns$ electrons.
- Reactivity is greatest at the two ends of a period. On the left, metals with very low ionisation enthalpies lose electrons readily: they are strong reducing agents, and their reactivity increases down the group ($\mathrm{Li\lt Na\lt K\lt Rb\lt Cs}$). On the right, non-metals with large negative electron gain enthalpies and high electronegativity gain electrons readily: they are strong oxidising agents, and their reactivity decreases down the group ($\mathrm{F_{2}\gt Cl_{2}\gt Br_{2}\gt I_{2}}$). Elements in the middle (C, Si) are the least reactive; the noble gases hardly react.
- Metallic character decreases across a period and increases down a group; non-metallic character does the opposite.
- Oxides of metals (left) are basic; oxides of non-metals (right) are acidic; elements near the metal/non-metal boundary give amphoteric oxides, which react with both acids and bases ($\mathrm{Al_{2}O_{3}}$, $\mathrm{BeO}$, $\mathrm{ZnO}$, $\mathrm{SnO_{2}}$, $\mathrm{PbO}$). A few oxides are neutral — neither acidic nor basic: $\mathrm{CO}$, $\mathrm{NO}$, $\mathrm{N_{2}O}$. Down a group oxides become more basic ($\mathrm{CO_{2}}$ acidic, $\mathrm{SnO_{2}}$ amphoteric); for one element, the higher the oxidation state, the more acidic the oxide.
Typical reactions with water show the change across period 3:
$$\mathrm{Na_{2}O(s)+H_{2}O(l)\rightarrow 2NaOH(aq)}\qquad\text{(basic)}$$ $$\mathrm{Cl_{2}O_{7}(l)+H_{2}O(l)\rightarrow 2HClO_{4}(aq)}\qquad\text{(acidic)}$$and aluminium oxide dissolves in both an acid and an alkali:
$$\mathrm{Al_{2}O_{3}(s)+6HCl(aq)\rightarrow 2AlCl_{3}(aq)+3H_{2}O(l)}$$ $$\mathrm{Al_{2}O_{3}(s)+2NaOH(aq)+3H_{2}O(l)\rightarrow 2Na[Al(OH)_{4}](aq)}$$The first member of each group is anomalous. Li, Be, B, C, N, O and F differ noticeably from the rest of their groups. They are exceptionally small, have high electronegativity and high charge-to-radius ratio, and have only four valence orbitals ($2s$, $2p$) — no $d$ orbitals in the valence shell. Consequences: their maximum covalency is 4 (boron forms $\mathrm{BF_{4}^{-}}$ while aluminium forms $\mathrm{[AlF_{6}]^{3-}}$); they form strong $p\pi$–$p\pi$ multiple bonds to themselves and to one another ($\mathrm{N{\equiv}N}$, $\mathrm{O{=}O}$, $\mathrm{C{=}C}$, whereas phosphorus and sulphur prefer single-bonded $\mathrm{P_{4}}$ and $\mathrm{S_{8}}$); and lithium and beryllium form compounds with marked covalent character.
The diagonal relationship. Moving one step right raises the charge-to-size ratio and electronegativity; moving one step down lowers them. The two changes nearly cancel along a diagonal, so Li resembles Mg, Be resembles Al and B resembles Si. Li and Mg both burn in nitrogen to form nitrides ($\mathrm{Li_{3}N}$, $\mathrm{Mg_{3}N_{2}}$) and have carbonates that decompose on heating; Be and Al both have amphoteric oxides and covalent chlorides that act as Lewis acids; B and Si are both semiconducting metalloids with acidic oxides and volatile covalent hydrides.
1. "Highest electron affinity" is chlorine, not fluorine. $\Delta_{eg}H$: $\mathrm{Cl}\ (-349)\gt\mathrm{F}\ (-328)$ in magnitude; similarly S more than O. But electronegativity: F is the highest. Also watch the sign convention — "more negative $\Delta_{eg}H$" and "larger electron affinity" mean the same thing.
2. The ionisation-enthalpy kinks. $\mathrm{Be\gt B}$, $\mathrm{N\gt O}$, $\mathrm{Mg\gt Al}$, $\mathrm{P\gt S}$; period 2 order $\mathrm{Li\lt B\lt Be\lt C\lt O\lt N\lt F\lt Ne}$. Down group 13, $\mathrm{Ga}\approx\mathrm{Al}$ and $\mathrm{Tl\gt In}$.
3. Isoelectronic radii go with $Z$, not with "how many shells". All of $\mathrm{N^{3-}}\dots\mathrm{Al^{3+}}$ have the same two shells; the one with more protons is smaller. And compare like with like: a noble gas's van der Waals radius is not "bigger than the halogen" in any meaningful sense.
4. Successive ionisation enthalpies: look for the big jump, not the first rise. Al's $\Delta_{i}H_{2}/\Delta_{i}H_{1}\approx3.1$ is an $s$–$p$ effect; the core jump ($\times4.2$) comes after the third electron. And $\Delta_{i}H_{2}(\mathrm{Na})\gg\Delta_{i}H_{2}(\mathrm{Mg})$.
5. Units and moles. $\Delta_{i}H$ is per mole: divide by $N_{A}$ for one atom, convert kJ to J before using $E=hc/\lambda$, and for an $\mathrm{M^{2+}}$ ion add $\Delta_{i}H_{1}+\Delta_{i}H_{2}$.
Which oxide reacts with both hydrochloric acid and aqueous sodium hydroxide to form salts?
Exercises
Use the data tables of this section unless other values are given. $h=6.626\times10^{-34}\ \mathrm{J\,s}$, $c=3.00\times10^{8}\ \mathrm{m\,s^{-1}}$, $N_{A}=6.022\times10^{23}\ \mathrm{mol^{-1}}$, $1\ \mathrm{eV}$ per atom $=96.5\ \mathrm{kJ\,mol^{-1}}$.
- 1 Explain how the effective nuclear charge on the valence electrons changes across period 2 and down group 1, and how this accounts for the trends in atomic radius.
- 2 Arrange O, C, F, Li and N in order of increasing atomic radius.
- 3 Which is larger in each pair, and why: (a) Na or $\mathrm{Na^{+}}$; (b) Cl or $\mathrm{Cl^{-}}$; (c) $\mathrm{Fe^{2+}}$ or $\mathrm{Fe^{3+}}$?
- 4 The Br–Br bond length in $\mathrm{Br_{2}}$ is $228\ \mathrm{pm}$. Find the covalent radius of bromine in pm.
- 5 In copper metal the nearest-neighbour distance is $256\ \mathrm{pm}$. Find the metallic radius of copper in pm.
- 6 How many of the following are isoelectronic with argon: $\mathrm{S^{2-}}$, $\mathrm{Cl^{-}}$, $\mathrm{K^{+}}$, $\mathrm{Ca^{2+}}$, $\mathrm{Na^{+}}$, $\mathrm{F^{-}}$, $\mathrm{Sc^{3+}}$, $\mathrm{O^{2-}}$?
- 7 Arrange $\mathrm{K^{+}}$, $\mathrm{Cl^{-}}$, $\mathrm{S^{2-}}$ and $\mathrm{Ca^{2+}}$ in order of decreasing radius, and explain.
- 8 Explain why the atomic radius of gallium ($135\ \mathrm{pm}$) is slightly smaller than that of aluminium ($143\ \mathrm{pm}$).
- 1 Define the first ionisation enthalpy. Why is it always positive, and why is $\Delta_{i}H_{2}\gt\Delta_{i}H_{1}$ for every element?
- 2 Arrange Na, Mg, Al and Si in order of increasing first ionisation enthalpy.
- 3 Explain why the first ionisation enthalpy of phosphorus is higher than that of sulphur.
- 4 Find the longest wavelength (in nm) of light that can ionise gaseous potassium atoms ($\Delta_{i}H_{1}=419\ \mathrm{kJ\,mol^{-1}}$).
- 5 How much energy (in kJ) is needed to ionise all the atoms in $0.39\ \mathrm{g}$ of gaseous potassium ($M=39\ \mathrm{g\,mol^{-1}}$)?
- 6 The ionisation enthalpy of the hydrogen atom is $1312\ \mathrm{kJ\,mol^{-1}}$. Find the ionisation enthalpy of $\mathrm{Li^{2+}}$ in $\mathrm{kJ\,mol^{-1}}$.
- 7 The first four ionisation enthalpies of an element are $738,\ 1451,\ 7733$ and $10\,543\ \mathrm{kJ\,mol^{-1}}$. To which group does it belong?
- 8 Find the energy (in $\mathrm{kJ\,mol^{-1}}$) for $\mathrm{Mg(g)\rightarrow Mg^{2+}(g)+2e^{-}}$.
- 9 Express the first ionisation enthalpy of sodium ($496\ \mathrm{kJ\,mol^{-1}}$) in electronvolts per atom.
- 1 Define electron gain enthalpy. How is it related to electron affinity, and what does a negative value mean?
- 2 Arrange F, Cl, Br and I in order of increasingly negative electron gain enthalpy.
- 3 Explain why the noble gases have positive electron gain enthalpies and nitrogen's is close to zero.
- 4 The second electron gain enthalpy of oxygen is about $+798\ \mathrm{kJ\,mol^{-1}}$, yet the oxide ion is found in very many compounds. Explain.
- 5 How much energy (in kJ) is released when $1.90\ \mathrm{g}$ of gaseous fluorine atoms gain electrons to form $\mathrm{F^{-}(g)}$ ($\Delta_{eg}H=-328\ \mathrm{kJ\,mol^{-1}}$, $M=19.0\ \mathrm{g\,mol^{-1}}$)?
- 6 Find $\Delta H$ (in $\mathrm{kJ\,mol^{-1}}$) for $\mathrm{K(g)+Cl(g)\rightarrow K^{+}(g)+Cl^{-}(g)}$.
- 7 Using Pauling electronegativities (Na $0.9$, Cl $3.0$), find the electronegativity difference in the Na–Cl bond.
- 8 Chlorine has the more negative electron gain enthalpy, but fluorine is the more electronegative element. Reconcile these facts.
- 1 What is the highest oxidation state shown by the element of period 3, group 16?
- 2 Element X is in period 3, group 2; element Y is in period 2, group 15. Write the formula of the compound they form and state how many atoms one formula unit contains.
- 3 Predict the formulas of the oxide and the chloride of the element in period 3, group 13, and state the valence used.
- 4 Classify as acidic, basic, amphoteric or neutral: $\mathrm{Na_{2}O}$, $\mathrm{Al_{2}O_{3}}$, $\mathrm{SO_{3}}$, $\mathrm{CO}$, $\mathrm{MgO}$, $\mathrm{Cl_{2}O_{7}}$, $\mathrm{ZnO}$, $\mathrm{N_{2}O}$. How many are amphoteric?
- 5 Write balanced equations to show that $\mathrm{Al_{2}O_{3}}$ is amphoteric.
- 6 Explain why reactivity increases down group 1 but decreases down group 17.
- 7 Name the three diagonal pairs of the second and third periods and give two similarities between lithium and magnesium.
- 8 What is the maximum covalency of nitrogen? Explain why phosphorus can exceed it (as in $\mathrm{PCl_{5}}$) but nitrogen cannot.
E1. JEE Main · MCQ The correct order of first ionisation enthalpy is (A) $\mathrm{Na\lt Mg\lt Al\lt Si}$ (B) $\mathrm{Na\lt Al\lt Mg\lt Si}$ (C) $\mathrm{Al\lt Na\lt Mg\lt Si}$ (D) $\mathrm{Na\lt Mg\lt Si\lt Al}$
E2. JEE Main · Numerical The first ionisation enthalpy of sodium is $496\ \mathrm{kJ\,mol^{-1}}$. Find the longest wavelength of radiation, in nm, that can ionise a gaseous sodium atom. ($h=6.626\times10^{-34}\ \mathrm{J\,s}$, $c=3.00\times10^{8}\ \mathrm{m\,s^{-1}}$, $N_{A}=6.022\times10^{23}\ \mathrm{mol^{-1}}$.) Give the answer to the nearest integer.
E3. JEE Main · MCQ The correct order of the magnitude of electron gain enthalpy (most negative first) is (A) $\mathrm{F\gt Cl\gt Br\gt I}$ (B) $\mathrm{I\gt Br\gt Cl\gt F}$ (C) $\mathrm{Cl\gt F\gt Br\gt I}$ (D) $\mathrm{Cl\gt Br\gt F\gt I}$
E4. JEE Main · Numerical The first and second ionisation enthalpies of magnesium are $738$ and $1451\ \mathrm{kJ\,mol^{-1}}$. Find the energy, in kJ, needed to convert $0.48\ \mathrm{g}$ of gaseous magnesium atoms completely into $\mathrm{Mg^{2+}(g)}$ ions ($M=24\ \mathrm{g\,mol^{-1}}$). Give the answer to the nearest integer.
E5. JEE Main · MCQ The correct order of ionic radii is (A) $\mathrm{Al^{3+}\gt Mg^{2+}\gt Na^{+}\gt F^{-}\gt O^{2-}}$ (B) $\mathrm{Na^{+}\gt Mg^{2+}\gt Al^{3+}\gt O^{2-}\gt F^{-}}$ (C) $\mathrm{O^{2-}\gt F^{-}\gt Al^{3+}\gt Mg^{2+}\gt Na^{+}}$ (D) $\mathrm{O^{2-}\gt F^{-}\gt Na^{+}\gt Mg^{2+}\gt Al^{3+}}$
E6. JEE Main · Numerical How many of the following oxides are amphoteric: $\mathrm{Al_{2}O_{3}}$, $\mathrm{BeO}$, $\mathrm{ZnO}$, $\mathrm{Na_{2}O}$, $\mathrm{CO}$, $\mathrm{SO_{3}}$, $\mathrm{SnO_{2}}$, $\mathrm{MgO}$? Give the answer to the nearest integer.
Research question. How well can a single number — the first ionisation enthalpy — predict how a metal behaves in practice? Test whether the ionisation enthalpies of the alkali and alkaline earth metals line up with (a) the photoelectric threshold wavelengths of their surfaces and (b) their flame-test behaviour and reactivity with water.
Why it matters. Engineers choose metals with low ionisation enthalpy for photocathodes in light sensors, night-vision tubes and particle detectors, and caesium and potassium compounds are used in such devices worldwide. Atmospheric chemists use ionisation enthalpies to understand why sodium and potassium atoms from meteors form ion layers high in the atmosphere. Knowing when a gas-phase atomic property transfers to the behaviour of a solid surface — and when it does not — is a real research question.
What to do.
- From reliable reference data collect the first ionisation enthalpies of Li, Na, K, Rb, Cs, Mg, Ca, Sr and Ba, and the work functions of the same metals' surfaces (the energy to remove an electron from the solid).
- Convert both to the longest wavelength of light able to remove an electron: $\lambda=hcN_{A}/\Delta_{i}H$ for atoms and $\lambda=hc/\phi$ for surfaces.
- Plot work function against first ionisation enthalpy (both in eV). Is the relation linear? Is the work function always smaller, and by roughly how much?
- Compare the order of your values with the order of reactivity of these metals with water (from a reliable demonstration video or reference description).
- Explain the differences between atom and solid in terms of what you know about metallic bonding and the effective nuclear charge.
Tools: A spreadsheet; a reputable data source for ionisation enthalpies and work functions; the constants $h$, $c$, $N_{A}$.
Hand in: A data table with sources, the plot with a fitted line, the threshold wavelengths, and one page assessing how far "low ionisation enthalpy" explains photoelectric use and chemical reactivity.
Going further. Lithium has a higher ionisation enthalpy than sodium yet a more negative standard electrode potential. Find out which other energy terms (sublimation, hydration) decide reactivity in water.
🧪 Self-check quiz
Q1. Which species has the largest radius?
Q2. Which of these elements has the highest first ionisation enthalpy?
Q3. The element with the most negative electron gain enthalpy is
Q4. Which of the following oxides is amphoteric?
Q5. Which pair of elements shows a diagonal relationship?