Chapter 15 · Hydrocarbons

15.4 Aromatic Hydrocarbons

Benzene, $\mathrm{C_{6}H_{6}}$, is as unsaturated as a triene on paper, yet it substitutes instead of adding. Naming benzene derivatives, the structure of benzene (Kekulé, resonance, delocalised π cloud, equal bonds), aromaticity and Hückel's $(4n+2)$ rule, the σ-complex mechanism of electrophilic substitution, halogenation, nitration, sulphonation, Friedel–Crafts alkylation and acylation, and the directing influence of substituents.

In 1825 Michael Faraday collected an oily liquid from the gas that lit London's streets. Its formula, $\mathrm{C_{6}H_{6}}$, has eight hydrogens fewer than hexane — the unsaturation of three double bonds and a ring — so it ought to decolourise bromine water at once, like hexa-1,3,5-triene. It does not. Benzene ignores bromine water and cold permanganate; with bromine and an iron catalyst it swaps a hydrogen for a bromine and keeps its ring intact. Hydrogenating it releases about $150\ \mathrm{kJ\,mol^{-1}}$ less heat than three double bonds should. Something about the ring of six makes it unusually stable.

That something is aromaticity. In this section we name benzene derivatives, explain the structure of benzene by resonance and by its delocalised π electrons, state Hückel's $(4n+2)$ rule for deciding which rings are aromatic, and then study the reaction that defines aromatic chemistry — electrophilic substitution — with its mechanism, its main examples (halogenation, nitration, sulphonation, Friedel–Crafts alkylation and acylation) and the rules by which a group already on the ring decides where the next one goes. We use resonance and the inductive effect (Chapter 14), the carbocation stabilities of Section 14.3 and the cyclic trimerisation of ethyne from Section 15.3.

Nomenclature and the structure of benzene

📘 Definition 15.10 — Aromatic hydrocarbons (arenes)

Aromatic hydrocarbons, or arenes, are hydrocarbons containing one or more benzene-like rings that show aromatic character (Definition 15.11). Benzenoid arenes contain benzene rings: benzene, toluene (methylbenzene), the xylenes (dimethylbenzenes), naphthalene $\mathrm{C_{10}H_{8}}$ (two fused rings), anthracene $\mathrm{C_{14}H_{10}}$ (three). Aromatic compounds without a benzene ring, such as the tropylium ion $\mathrm{C_{7}H_{7}^{+}}$ or pyridine, are called non-benzenoid.

The group $\mathrm{C_{6}H_{5}{-}}$ is phenyl (Ph); $\mathrm{C_{6}H_{5}CH_{2}{-}}$ is benzyl; a general aryl group is written Ar.

Naming benzene derivatives. A single substituent is named as a prefix to benzene (chlorobenzene, nitrobenzene, ethylbenzene), except that several compounds keep accepted names that IUPAC uses as parent names: toluene $\mathrm{C_{6}H_{5}CH_{3}}$, phenol $\mathrm{C_{6}H_{5}OH}$, aniline $\mathrm{C_{6}H_{5}NH_{2}}$, anisole $\mathrm{C_{6}H_{5}OCH_{3}}$, benzaldehyde, benzoic acid, acetophenone $\mathrm{C_{6}H_{5}COCH_{3}}$, styrene $\mathrm{C_{6}H_{5}CH{=}CH_{2}}$. For two substituents the relative positions 1,2-, 1,3- and 1,4- are also called ortho (o-), meta (m-) and para (p-). In IUPAC names, ring positions are numbered to give the lowest set of locants; if a parent name such as toluene or phenol is used, its group is C1; otherwise, on a tie, the substituent cited first in alphabetical order gets the lower number.

CompoundIUPAC nameCommon name
$\mathrm{C_{6}H_{4}(CH_{3})_{2}}$, 1,21,2-dimethylbenzeneo-xylene
$\mathrm{C_{6}H_{4}Cl_{2}}$, 1,31,3-dichlorobenzenem-dichlorobenzene
$\mathrm{CH_{3}C_{6}H_{4}NO_{2}}$, 1,41-methyl-4-nitrobenzene (4-nitrotoluene)p-nitrotoluene
$\mathrm{BrC_{6}H_{4}Cl}$, 1,21-bromo-2-chlorobenzeneo-bromochlorobenzene
$\mathrm{C_{6}H_{3}(CH_{3})_{3}}$, 1,3,51,3,5-trimethylbenzenemesitylene
$\mathrm{C_{6}H_{5}CH(CH_{3})_{2}}$(propan-2-yl)benzeneisopropylbenzene, cumene
📐 Result 15.21 — Number of isomers of substituted benzenes

Because all six positions of benzene are equivalent, the number of structural isomers depends only on the pattern of substituents:

  • $\mathrm{C_{6}H_{5}X}$: $1$  ·  $\mathrm{C_{6}H_{4}X_{2}}$ or $\mathrm{C_{6}H_{4}XY}$: $3$ (o, m, p)
  • $\mathrm{C_{6}H_{3}X_{3}}$: $3$ (1,2,3; 1,2,4; 1,3,5)  ·  $\mathrm{C_{6}H_{3}X_{2}Y}$: $6$  ·  $\mathrm{C_{6}H_{3}XYZ}$: $10$
  • $\mathrm{C_{6}H_{2}X_{4}}$: $3$ (as for $\mathrm{C_{6}H_{4}X_{2}}$ — count the H atoms instead)

Aromatic isomers of $\mathrm{C_{8}H_{10}}$: $4$ (ethylbenzene and the three xylenes); of $\mathrm{C_{9}H_{12}}$: $8$ (propylbenzene, isopropylbenzene, three ethyltoluenes, three trimethylbenzenes).

Kekulé's structure and its problem. In 1865 August Kekulé proposed a six-membered ring of carbon atoms with alternating single and double bonds, one H on each carbon. It explains the formula and the fact that benzene gives only one monosubstitution product. But it predicts two different 1,2-dibromobenzenes — one with the two Br atoms across a double bond, one across a single bond — and only one is known. Kekulé suggested the double bonds oscillate rapidly between the two positions. Neither the two-isomer problem nor benzene's resistance to addition is really explained by alternating bonds.

Resonance. Benzene is the resonance hybrid of the two Kekulé structures, which differ only in the placing of the π electrons. Neither structure exists; each C–C bond is a "one-and-a-half" bond. X-ray diffraction confirms it: all six C–C bonds are $139\ \mathrm{pm}$ — between C–C ($154\ \mathrm{pm}$) and C=C ($134\ \mathrm{pm}$) — and the ring is a regular hexagon. The hybrid is drawn as a hexagon with a circle.

The orbital picture. Each carbon is $sp^{2}$ hybridised, forming σ bonds to two neighbouring carbons and one hydrogen at $120^{\circ}$; the whole molecule, all twelve atoms, is flat. Each carbon keeps one $p$ orbital perpendicular to the ring, holding one electron. Each $p$ orbital overlaps equally with both neighbours, so the six π electrons are not localised in three double bonds but spread over the whole ring as two doughnut-shaped clouds, above and below the plane. In molecular-orbital language, the six $p$ orbitals combine into six π molecular orbitals: three bonding and three antibonding. The six π electrons exactly fill the three bonding orbitals — a closed shell with no electrons in non-bonding or antibonding levels — which is the source of the extra stability.

Resonance energy. Adding $\mathrm{H_{2}}$ to cyclohexene releases $120\ \mathrm{kJ\,mol^{-1}}$. A ring with three localised double bonds ("cyclohexatriene") should release $3\times120=360\ \mathrm{kJ\,mol^{-1}}$; benzene actually releases only $208\ \mathrm{kJ\,mol^{-1}}$. Benzene is therefore about $150\ \mathrm{kJ\,mol^{-1}}$ more stable than any single Kekulé structure: this is its resonance (delocalisation) energy. Reactions that destroy the π sextet (additions) give up this energy, so benzene prefers reactions that keep it (substitutions).

Where benzene comes from. Benzene and its homologues are obtained from coal tar and from petroleum (catalytic reforming). In the laboratory: (i) cyclic trimerisation of ethyne through a red-hot iron tube ($\mathrm{3C_{2}H_{2}\rightarrow C_{6}H_{6}}$, Section 15.3); (ii) heating sodium benzoate with soda lime (decarboxylation), $\mathrm{C_{6}H_{5}COONa+NaOH\xrightarrow{CaO,\ \Delta}C_{6}H_{6}+Na_{2}CO_{3}}$; (iii) heating phenol with zinc dust, $\mathrm{C_{6}H_{5}OH+Zn\rightarrow C_{6}H_{6}+ZnO}$.

✏️ Example 1 — Naming and counting isomers
(a) Name $\mathrm{ClC_{6}H_{4}NO_{2}}$ (1,4) and $\mathrm{BrC_{6}H_{4}CH_{3}}$ (1,3) by IUPAC rules. (b) How many structural isomers have the formula $\mathrm{C_{6}H_{3}Cl_{2}Br}$ (a benzene ring with two Cl and one Br)? Name them.
Find the number of isomers in (b) first:
(a) Locants $\{1,4\}$ either way; chloro comes before nitro alphabetically: 1-chloro-4-nitrobenzene. The second: 1-bromo-3-methylbenzene, or as a derivative of toluene, 3-bromotoluene (the $\mathrm{CH_{3}}$ is C1).
Cl,Cl ortho Br next to a Cl or one place further: 1-bromo-2,3-dichlorobenzene and 4-bromo-1,2-dichlorobenzene — $2$.
Cl,Cl meta Br between them, next to one, or opposite: 2-bromo-1,3-dichlorobenzene, 1-bromo-2,4-dichlorobenzene, 1-bromo-3,5-dichlorobenzene — $3$.
Cl,Cl para All four free positions are equivalent: 2-bromo-1,4-dichlorobenzene — $1$. Total $2+3+1=6$.
Check This is the $\mathrm{C_{6}H_{3}X_{2}Y}$ entry of Result 15.21.
✏️ Example 2 — Measuring the resonance energy
Enthalpies of hydrogenation (to cyclohexane) are: cyclohexene $-120\ \mathrm{kJ\,mol^{-1}}$, cyclohexa-1,3-diene $-232\ \mathrm{kJ\,mol^{-1}}$, benzene $-208\ \mathrm{kJ\,mol^{-1}}$. (a) Find the resonance energy of benzene. (b) Find the extra stabilisation of the conjugated diene. (c) Use your answers to explain why hydrogenating benzene to cyclohexa-1,3-diene is endothermic, and why benzene does not stop at a diene or an alkene when hydrogenated.
Find the resonance energy (a):
(a) Expected for three isolated C=C: $3(-120)=-360\ \mathrm{kJ\,mol^{-1}}$. Benzene: $-208$. Resonance energy $=360-208=152\ \mathrm{kJ\,mol^{-1}}$.
(b) Expected for two isolated C=C: $-240$; found $-232$: conjugation gives only $8\ \mathrm{kJ\,mol^{-1}}$. Delocalisation round a closed ring of six is worth almost twenty times more than along an open diene.
(c) By Hess's law, benzene + $\mathrm{H_{2}}$ → cyclohexa-1,3-diene has $\Delta H=-208-(-232)=+24\ \mathrm{kJ\,mol^{-1}}$: the first step costs energy because it destroys the aromatic sextet. Once it happens, the diene and the alkene are hydrogenated faster than benzene itself, so no intermediate builds up and cyclohexane is the product ($\mathrm{C_{6}H_{6}+3H_{2}\xrightarrow{Ni,\ \Delta}C_{6}H_{12}}$).

All C–C bonds in benzene are $139\ \mathrm{pm}$ long. The best explanation is that

Aromaticity and Hückel's rule

Benzene's special stability is shared by many other rings — some neutral, some ions, some containing nitrogen, oxygen or sulphur. What they have in common was found by Erich Hückel in 1931 from molecular-orbital theory: in a flat, fully conjugated ring the π molecular orbitals come as one lowest level followed by degenerate pairs, so a closed shell (every bonding level full, nothing half-filled) needs $2,6,10,14,\dots$ π electrons.

📘 Definition 15.11 — Aromatic, antiaromatic and non-aromatic

A molecule or ion is aromatic if it has all four features: (1) it is cyclic; (2) the ring is planar (or nearly so); (3) it is fully conjugated — every ring atom has a $p$ orbital perpendicular to the ring (no $sp^{3}$ ring atom); (4) the ring holds $(4n+2)$ π electrons, $n=0,1,2,\dots$ (Hückel's rule). Aromatic compounds are unusually stable and react by substitution rather than addition.

A cyclic, planar, fully conjugated system with $4n$ π electrons is antiaromatic — less stable than the open-chain analogue (e.g. cyclobutadiene, which exists only fleetingly). A ring that fails (1), (2) or (3) is non-aromatic: it behaves like an ordinary alkene.

📐 Rule 15.22 — Hückel's rule

A planar, cyclic, fully conjugated system is aromatic when its number of π electrons is

$$N_{\pi}=4n+2\qquad(n=0,1,2,\dots):\ 2,\ 6,\ 10,\ 14,\ \dots$$

and antiaromatic when $N_{\pi}=4n$ ($4,8,\dots$). Rules for counting $N_{\pi}$: each C=C in the ring gives $2$; a ring carbanion ($\mathrm{\ddot{C}^{-}}$) gives $2$ (its lone pair is in the $p$ orbital); a ring carbocation gives $0$ (empty $p$ orbital) but keeps conjugation; a ring heteroatom gives $2$ if its lone pair has to be in the $p$ orbital (pyrrole N–H, furan O, thiophene S) and $0$ extra if it already has a π bond and its lone pair lies in the ring plane (pyridine N). An $sp^{3}$ ring atom ($\mathrm{CH_{2}}$) breaks the conjugation.

SpeciesRing$N_{\pi}$Verdict
benzene, pyridine66 ($n=1$)aromatic
cyclopentadienyl anion $\mathrm{C_{5}H_{5}^{-}}$; pyrrole, furan, thiophene56aromatic
tropylium (cycloheptatrienyl) cation $\mathrm{C_{7}H_{7}^{+}}$76aromatic
cyclopropenyl cation $\mathrm{C_{3}H_{3}^{+}}$32 ($n=0$)aromatic
naphthalene; cyclooctatetraene dianion $\mathrm{C_{8}H_{8}^{2-}}$10 / 810 ($n=2$)aromatic
cyclobutadiene; cyclopentadienyl cation $\mathrm{C_{5}H_{5}^{+}}$4 / 54antiaromatic
cyclopentadiene; cycloheptatriene5 / 7(4 / 6)non-aromatic ($sp^{3}$ $\mathrm{CH_{2}}$)
cyclooctatetraene $\mathrm{C_{8}H_{8}}$88non-aromatic (tub-shaped, not planar)

Two consequences show the rule at work. Cyclopentadiene ($\mathrm{p}K_{a}\approx16$) is about as acidic as water — astonishing for a hydrocarbon — because its conjugate base, $\mathrm{C_{5}H_{5}^{-}}$, is aromatic. And cyclooctatetraene avoids being antiaromatic by puckering into a tub, so it behaves as an ordinary polyene that adds bromine readily; with two extra electrons ($\mathrm{C_{8}H_{8}^{2-}}$, $10$ π electrons) it becomes planar and aromatic.

🧭 Problem-solving strategy — Is it aromatic?
  1. Ring? Look for one closed loop of atoms (for fused rings, the outer periphery).
  2. Every ring atom $sp^{2}$ (or $sp$)? A $\mathrm{CH_{2}}$ or other $sp^{3}$ atom in the ring → non-aromatic. A carbocation or carbanion centre counts as $sp^{2}$.
  3. Planar? Small rings are; large ($\ge8$) neutral $4n$ rings usually pucker.
  4. Count π electrons (Rule 15.22) — don't count a lone pair that lies in the ring plane.
  5. $4n+2$ → aromatic; $4n$ (and planar, conjugated) → antiaromatic.
✏️ Example 3 — Classifying eight rings
Classify each as aromatic, antiaromatic or non-aromatic, giving $N_{\pi}$: (a) cyclopentadienyl anion, (b) cyclopentadiene, (c) cycloheptatrienyl cation, (d) cyclooctatetraene, (e) cyclopropenyl cation, (f) cyclobutadiene, (g) pyridine, (h) furan. How many are aromatic?
(a), (b) $\mathrm{C_{5}H_{5}^{-}}$: two C=C ($4$) + the carbanion pair ($2$) = $6$, planar, conjugated → aromatic. Cyclopentadiene: the $\mathrm{CH_{2}}$ is $sp^{3}$ → non-aromatic.
(c), (d) $\mathrm{C_{7}H_{7}^{+}}$: three C=C ($6$) + empty $p$ ($0$) = $6$ → aromatic. $\mathrm{C_{8}H_{8}}$: $8$ π electrons, but tub-shaped → non-aromatic.
(e), (f) $\mathrm{C_{3}H_{3}^{+}}$: $2$ ($n=0$) → aromatic. Cyclobutadiene: $4$, planar, conjugated → antiaromatic.
(g), (h) Pyridine: three C=C/C=N give $6$; the N lone pair is in an $sp^{2}$ orbital in the ring plane and is not counted → aromatic. Furan: two C=C ($4$) + one O lone pair in the $p$ orbital ($2$) = $6$ → aromatic (the second O lone pair lies in the plane).
Count Aromatic: (a), (c), (e), (g), (h) — $5$.

In the Hückel explorer choose the cyclopentadienyl cation, $\mathrm{C_{5}H_{5}^{+}}$. What will the Frost diagram and the readouts show?

Choose the cyclopentadienyl cation: the readouts show π electrons $4$, Hückel count "$4 = 4n$ ($n=1$)", unpaired electrons (Frost) $2$ and verdict "antiaromatic". On the Frost circle (a pentagon standing on one vertex), the lowest level takes $2$ electrons and the next level is a degenerate pair; with only $2$ more electrons Hund's rule puts one in each. Switch to the cyclopentadienyl anion: $6$ electrons fill that pair, $0$ unpaired, aromatic — the same ring, two electrons apart.
Interactive 1 — Hückel's Rule and the Frost Circle

Choose a ring. Left: the structure, with its π electrons drawn as dots (an $sp^{3}$ atom that breaks the conjugation is marked in red). Right: the Frost circle — a polygon of the ring drawn point-down inside a circle; each corner gives the energy of one π molecular orbital (below the dashed line: bonding). Press Play to feed the electrons in, lowest level first, one per orbital before pairing. A closed shell with no unpaired electrons is the mark of $4n+2$.

π electrons—
Hückel count—
unpaired e⁻ (Frost)—
verdict—

Pyrrole ($\mathrm{C_{4}H_{4}NH}$) is aromatic, but pyrrole is a much weaker base than pyridine. Why?

Electrophilic aromatic substitution

The delocalised π cloud makes benzene electron-rich, so it is attacked by electrophiles. But where an alkene would add the electrophile and a nucleophile, benzene loses a proton instead and gets its aromatic sextet back. Overall, an $\mathrm{H}$ on the ring is replaced by an $\mathrm{E}$: electrophilic aromatic substitution (EAS).

📐 Rule 15.23 — Mechanism of electrophilic aromatic substitution
  1. Generation of the electrophile $\mathrm{E^{+}}$ from the reagent, usually with a catalyst (a Lewis acid such as $\mathrm{FeCl_{3}}$ or $\mathrm{AlCl_{3}}$, or concentrated $\mathrm{H_{2}SO_{4}}$).
  2. Formation of the σ-complex (slow, rate-determining): two π electrons of the ring form a σ bond to $\mathrm{E}$. The attacked carbon becomes $sp^{3}$, aromaticity is lost, and the positive charge is delocalised over the remaining five carbons — mainly on the carbons ortho and para to the $sp^{3}$ carbon (three resonance structures). This carbocation is called the arenium ion or σ-complex (Wheland intermediate).
  3. Loss of a proton (fast): a base ($\mathrm{HSO_{4}^{-}}$, $\mathrm{FeCl_{4}^{-}}$, $\mathrm{AlCl_{4}^{-}}$) removes $\mathrm{H^{+}}$ from the $sp^{3}$ carbon; the C–H electron pair returns to the ring, restoring the aromatic sextet. The catalyst is regenerated.

The σ-complex is a true intermediate (an energy minimum between two transition states). Losing $\mathrm{H^{+}}$ (substitution) rather than adding a nucleophile (addition) is favoured because it regains about $150\ \mathrm{kJ\,mol^{-1}}$ of resonance energy.

1. Halogenation. Chlorine or bromine alone is not electrophilic enough. A Lewis acid (anhydrous $\mathrm{FeCl_{3}}$, $\mathrm{FeBr_{3}}$ or $\mathrm{AlCl_{3}}$, or iron filings, which form $\mathrm{FeBr_{3}}$ with bromine) polarises the X–X bond and in effect delivers $\mathrm{X^{+}}$. The reaction is done in the dark, at room temperature:

$$\mathrm{Cl_{2}+FeCl_{3}\rightarrow Cl^{+}+[FeCl_{4}]^{-}}$$ $$\mathrm{C_{6}H_{6}+Cl_{2}\xrightarrow{\text{anhyd. }FeCl_{3},\ \text{dark}}C_{6}H_{5}Cl+HCl}$$

(In bright sunlight and without a catalyst, chlorine instead adds to benzene by a free-radical route: $\mathrm{C_{6}H_{6}+3Cl_{2}\xrightarrow{h\nu}C_{6}H_{6}Cl_{6}}$, benzene hexachloride (BHC), whose γ-isomer was used as the insecticide gammexane/lindane. Iodination is reversible and needs an oxidising agent such as $\mathrm{HNO_{3}}$ to remove the HI.)

2. Nitration. A mixture of concentrated nitric and sulphuric acids (the nitrating mixture) at $323$–$333\ \mathrm{K}$ converts benzene into nitrobenzene. Sulphuric acid, the stronger acid, protonates nitric acid, which loses water to give the electrophile, the nitronium ion $\mathrm{NO_{2}^{+}}$ (linear, $\mathrm{O{=}\overset{+}{N}{=}O}$):

$$\mathrm{HNO_{3}+2H_{2}SO_{4}\rightleftharpoons NO_{2}^{+}+H_{3}O^{+}+2HSO_{4}^{-}}$$ $$\mathrm{C_{6}H_{6}+HNO_{3}\xrightarrow[323{-}333\ K]{conc.\ H_{2}SO_{4}}C_{6}H_{5}NO_{2}+H_{2}O}$$

At higher temperatures the product is nitrated again (to 1,3-dinitrobenzene — meta, see below).

3. Sulphonation. Heating benzene with concentrated sulphuric acid, or better with fuming sulphuric acid (oleum, $\mathrm{H_{2}SO_{4}+SO_{3}}$), gives benzenesulphonic acid. The electrophile is sulphur trioxide (electron-poor S) or its protonated form $\mathrm{HSO_{3}^{+}}$:

$$\mathrm{2H_{2}SO_{4}\rightleftharpoons SO_{3}+H_{3}O^{+}+HSO_{4}^{-}}$$ $$\mathrm{C_{6}H_{6}+H_{2}SO_{4}(SO_{3})\xrightarrow{\Delta}C_{6}H_{5}SO_{3}H+H_{2}O}$$

Unlike the others, sulphonation is reversible: heating benzenesulphonic acid with dilute acid (steam) removes the $\mathrm{{-}SO_{3}H}$ group again.

4. Friedel–Crafts alkylation. An alkyl halide with anhydrous $\mathrm{AlCl_{3}}$ alkylates the ring (Charles Friedel and James Crafts, 1877). $\mathrm{AlCl_{3}}$ pulls the halide off to give a carbocation (or a strongly polarised $\mathrm{R^{\delta+}\cdots Cl\cdots AlCl_{3}^{\delta-}}$ complex):

$$\mathrm{CH_{3}Cl+AlCl_{3}\rightarrow CH_{3}^{+}+[AlCl_{4}]^{-}}$$ $$\mathrm{C_{6}H_{6}+CH_{3}Cl\xrightarrow{\text{anhyd. }AlCl_{3}}C_{6}H_{5}CH_{3}+HCl}$$

Alkenes with an acid (e.g. propene with HF or $\mathrm{H_{3}PO_{4}}$, or with $\mathrm{AlCl_{3}/HCl}$) also alkylate benzene, through the carbocation formed by protonation; this is how cumene is made industrially.

📐 Rule 15.24 — Limitations of Friedel–Crafts alkylation
  1. Rearrangement. The carbocation can rearrange (1,2-hydride or methyl shift) to a more stable one before it attacks. 1-Chloropropane gives mainly isopropylbenzene (cumene): $\mathrm{CH_{3}CH_{2}\overset{+}{C}H_{2}\rightarrow CH_{3}\overset{+}{C}HCH_{3}}$; 1-chloro-2-methylpropane gives tert-butylbenzene. A straight chain of three or more carbons cannot be attached this way.
  2. Polyalkylation. The alkyl group activates the ring (+I, hyperconjugation), so the product is more reactive than benzene and is alkylated again (di-, trialkylbenzenes). A large excess of benzene is used to favour the monoalkyl product.
  3. Strongly deactivated rings do not react (nitrobenzene is inert enough to be used as a solvent). Rings carrying $\mathrm{{-}NH_{2}}$, $\mathrm{{-}NHR}$ or $\mathrm{{-}NR_{2}}$ do not react either: the nitrogen lone pair binds the Lewis acid $\mathrm{AlCl_{3}}$, and the resulting $\mathrm{{-}\overset{+}{N}H_{2}{-}\overset{-}{Al}Cl_{3}}$ group strongly deactivates the ring.
  4. Aryl and vinyl halides cannot be used as the alkylating agent: their C–X bonds (on $sp^{2}$ carbon) do not give carbocations.

5. Friedel–Crafts acylation. An acyl chloride ($\mathrm{RCOCl}$) or acid anhydride with anhydrous $\mathrm{AlCl_{3}}$ gives an aryl ketone. The electrophile is the acylium ion $\mathrm{R{-}C{\equiv}O^{+}}$, stabilised by resonance ($\mathrm{R{-}\overset{+}{C}{=}O\leftrightarrow R{-}C{\equiv}\overset{+}{O}}$):

$$\mathrm{CH_{3}COCl+AlCl_{3}\rightarrow CH_{3}CO^{+}+[AlCl_{4}]^{-}}$$ $$\mathrm{C_{6}H_{6}+CH_{3}COCl\xrightarrow{\text{anhyd. }AlCl_{3}}C_{6}H_{5}COCH_{3}+HCl}$$ $$\mathrm{C_{6}H_{6}+(CH_{3}CO)_{2}O\xrightarrow{\text{anhyd. }AlCl_{3}}C_{6}H_{5}COCH_{3}+CH_{3}COOH}$$

Acylation is free of both main problems of alkylation: the acylium ion does not rearrange, and the C=O group of the product deactivates the ring, so only one acyl group goes in. (The product ketone binds $\mathrm{AlCl_{3}}$, so at least one mole of catalyst per mole of ketone is needed.) Acylation followed by reduction of C=O to $\mathrm{CH_{2}}$ (Clemmensen or Wolff–Kishner reduction, Chapter 17) is the standard route to straight-chain alkylbenzenes: benzene $\xrightarrow{\mathrm{CH_{3}CH_{2}COCl/AlCl_{3}}}$ $\mathrm{C_{6}H_{5}COCH_{2}CH_{3}}$ $\xrightarrow{\mathrm{Zn(Hg)/HCl}}$ propylbenzene.

Other reactions. Under forcing conditions benzene does add: $\mathrm{C_{6}H_{6}+3H_{2}\xrightarrow{Ni,\ 473\ K}C_{6}H_{12}}$ (cyclohexane). It burns with a very sooty flame (high carbon content): $\mathrm{2C_{6}H_{6}+15O_{2}\rightarrow12CO_{2}+6H_{2}O}$.

ReactionReagent / catalystElectrophileProduct from benzene
chlorination / bromination$\mathrm{Cl_{2}/FeCl_{3}}$; $\mathrm{Br_{2}/FeBr_{3}}$, dark$\mathrm{Cl^{+}}$, $\mathrm{Br^{+}}$ (complexed)$\mathrm{C_{6}H_{5}Cl}$, $\mathrm{C_{6}H_{5}Br}$
nitrationconc. $\mathrm{HNO_{3}}$ + conc. $\mathrm{H_{2}SO_{4}}$$\mathrm{NO_{2}^{+}}$$\mathrm{C_{6}H_{5}NO_{2}}$
sulphonationoleum ($\mathrm{H_{2}SO_{4}+SO_{3}}$)$\mathrm{SO_{3}}$ / $\mathrm{HSO_{3}^{+}}$$\mathrm{C_{6}H_{5}SO_{3}H}$
F–C alkylation$\mathrm{RCl}$ + anhyd. $\mathrm{AlCl_{3}}$$\mathrm{R^{+}}$$\mathrm{C_{6}H_{5}R}$ (may rearrange)
F–C acylation$\mathrm{RCOCl}$ + anhyd. $\mathrm{AlCl_{3}}$$\mathrm{RCO^{+}}$$\mathrm{C_{6}H_{5}COR}$
✏️ Example 4 — Friedel–Crafts: what really forms?
Predict the main product, with a reason: (a) benzene + 1-chloropropane / $\mathrm{AlCl_{3}}$; (b) benzene + 1-chloro-2-methylpropane / $\mathrm{AlCl_{3}}$; (c) benzene + propanoyl chloride / $\mathrm{AlCl_{3}}$. (d) Give a route from benzene to propylbenzene. (e) Why is the alkylation in (a) done with a large excess of benzene?
(a) $\mathrm{CH_{3}CH_{2}CH_{2}^{+}}$ (1°) rearranges by a 1,2-hydride shift to $\mathrm{(CH_{3})_{2}CH^{+}}$ (2°): main product isopropylbenzene (cumene), with some propylbenzene.
(b) $\mathrm{(CH_{3})_{2}CHCH_{2}^{+}}$ (1°) → hydride shift → $\mathrm{(CH_{3})_{3}C^{+}}$ (3°): tert-butylbenzene, $\mathrm{C_{6}H_{5}C(CH_{3})_{3}}$.
(c) $\mathrm{CH_{3}CH_{2}CO^{+}}$ does not rearrange: 1-phenylpropan-1-one (propiophenone), $\mathrm{C_{6}H_{5}COCH_{2}CH_{3}}$, monosubstituted only.
(d) Acylate as in (c), then reduce C=O to $\mathrm{CH_{2}}$ (Clemmensen: Zn–Hg, conc. HCl): $\mathrm{C_{6}H_{5}CH_{2}CH_{2}CH_{3}}$.
(e) Cumene is more reactive than benzene (alkyl groups activate), so it would be alkylated again; a large excess of benzene makes it far more likely that each carbocation meets a benzene molecule.

In the nitration of benzene, the role of concentrated sulphuric acid is to

Directive influence of substituents

When a benzene ring already carries a group G, an electrophile can attack ortho, meta or para to it. Experiment shows two clear patterns. Toluene nitrates about 25 times faster than benzene and gives mainly 2- and 4-nitrotoluene; nitrobenzene nitrates millions of times more slowly and gives mainly 1,3-dinitrobenzene. The group decides both the rate and the position.

📘 Definition 15.12 — Activating and deactivating groups; ortho/para and meta directors

A substituent is activating if the substituted benzene undergoes electrophilic substitution faster than benzene, and deactivating if slower. It is an ortho/para director if the new group enters mainly at the 2- and 4-positions, and a meta director if it enters mainly at the 3-position.

📐 Rule 15.25 — Directive influence of substituents
ClassGroups (strongest first)Electronic effect
o/p directing, activating$\mathrm{{-}NH_{2},\ {-}NHR,\ {-}NR_{2},\ {-}OH,\ {-}OCH_{3},\ {-}NHCOCH_{3},\ {-}CH_{3}}$ and other alkyl, $\mathrm{{-}C_{6}H_{5}}$$+M$ (lone pair on the atom next to the ring) outweighs $-I$; alkyl: $+I$ and hyperconjugation
o/p directing, deactivating$\mathrm{{-}F,\ {-}Cl,\ {-}Br,\ {-}I}$$-I$ outweighs $+M$ (rate), but $+M$ decides the position
meta directing, deactivating$\mathrm{{-}NO_{2},\ {-}N(CH_{3})_{3}^{+},\ {-}CN,\ {-}SO_{3}H,\ {-}CHO,\ {-}COR,\ {-}COOH,\ {-}COOR,\ {-}CCl_{3}}$$-M$ and/or $-I$; the atom next to the ring is $\delta+$ or $+$ and has no lone pair

Rule of thumb: a group whose first atom carries a lone pair, or an alkyl group, directs ortho/para; a group whose first atom is part of a multiple bond to a more electronegative atom, or carries a positive charge, directs meta. All activating groups are ortho/para directors; all meta directors are deactivating.

Why — the σ-complex decides. The rate-determining step makes the σ-complex, whose positive charge sits on the carbons ortho and para to the point of attack. Compare the three possible σ-complexes for a ring carrying G:

Electron density view. Resonance of a donor with the ring ($\mathrm{\ddot{N}H_{2}}$, $\mathrm{\ddot{O}H}$) places $\delta-$ on the ortho and para carbons of the starting compound; a withdrawing group ($\mathrm{NO_{2}}$, $\mathrm{CHO}$) places $\delta+$ there, leaving the meta carbons the least electron-poor. Both pictures lead to the same rules.

Halogens — the odd case. Chlorine and bromine are strongly electronegative ($-I$), so they withdraw electron density from the whole ring through the σ bond: chlorobenzene reacts more slowly than benzene. But when the electrophile attacks ortho or para, the halogen's lone pair can stabilise the σ-complex ($+M$): so they direct ortho/para. Rate is decided by $-I$, orientation by $+M$.

Ortho or para? There are two ortho positions and one para, but para usually wins for bulky groups or bulky electrophiles (steric hindrance at ortho): nitration of toluene gives about $58\%$ ortho and $38\%$ para; of tert-butylbenzene, mainly para. When a ring carries two groups, the more strongly activating group controls the position, and substitution between two groups that are meta to each other is rare (crowding).

✏️ Example 5 — The order of steps matters
(a) Starting from benzene, prepare 1-bromo-3-nitrobenzene and 1-bromo-4-nitrobenzene. (b) Give the main products of nitrating toluene, chlorobenzene and benzaldehyde. (c) Arrange benzene, toluene, chlorobenzene, nitrobenzene and methoxybenzene in order of decreasing rate of nitration.
(a) meta Nitrate first ($\mathrm{HNO_{3}/H_{2}SO_{4}}$) → nitrobenzene; then $\mathrm{Br_{2}/FeBr_{3}}$: $\mathrm{{-}NO_{2}}$ directs meta → 1-bromo-3-nitrobenzene.
(a) para Brominate first → bromobenzene; then nitrate: Br directs o/p → 1-bromo-2-nitro + 1-bromo-4-nitrobenzene; separate the para isomer (higher melting point, less soluble — it crystallises out).
(b) Toluene → 2- and 4-nitrotoluene; chlorobenzene → 1-chloro-2-nitro- and 1-chloro-4-nitrobenzene (mainly para), slower than benzene; benzaldehyde → 3-nitrobenzaldehyde, much slower.
(c) methoxybenzene ($+M$) $\gt$ toluene ($+I$, hyperconjugation) $\gt$ benzene $\gt$ chlorobenzene ($-I\gt+M$) $\gt$ nitrobenzene ($-M$, $-I$).
✏️ Example 6 — Counting substitution products (JEE Main level)
(a) How many different ring-monobromination products (structural isomers) can be formed from each of o-xylene, m-xylene and p-xylene? (b) Which xylene could be identified by giving only one mononitro derivative? (c) 4-Methylanisole (1-methoxy-4-methylbenzene) is nitrated. Where does the nitro group go, and why?
Find the total number of monobromo products for the three xylenes together:
o-xylene Free positions 3, 4, 5, 6; by symmetry $3\equiv6$, $4\equiv5$: $2$ products (3-bromo- and 4-bromo-1,2-dimethylbenzene).
m-xylene Free positions 2, 4, 5, 6; $4\equiv6$: $3$ products (positions 2, 4, 5).
p-xylene All four H are equivalent: $1$ product. Total $2+3+1=6$. (b) p-Xylene.
(c) Both groups direct o/p; the positions para to each are blocked by the other, so the choice is ortho to $\mathrm{OCH_{3}}$ (C2) or ortho to $\mathrm{CH_{3}}$ (C3). $\mathrm{{-}OCH_{3}}$ ($+M$) is the stronger activator and wins: 1-methoxy-4-methyl-2-nitrobenzene.

In the directing-effect explorer choose –NO₂ and ortho attack. In how many of the σ-complex structures is the positive charge on the ring carbon that carries the nitro group?

With –NO₂ and ortho attack the readouts show effect "−M and −I", rate "strongly deactivating", directs "meta", and σ-complex "3 structures (one puts + on C–NO₂)"; that structure is boxed in red. Switch to meta: "3 structures (+ never on C–NO₂)" — no red box, so meta is the least slowed. Now try –OCH₃ with para attack: "4 structures (extra: + on O)", the fourth boxed in green. Every activating group behaves this way at ortho and para; –CH₃ gives a tertiary carbocation instead of a fourth structure.
Interactive 2 — Directing Effects: Inside the σ-Complex

Choose the group G already on the ring and where the electrophile E attacks (always drawn at the top carbon). The row shows the resonance structures of the σ-complex: the $+$ charge visits the carbons ortho and para to the attacked carbon. If one structure puts $+$ on the carbon carrying G, it is boxed — green if G stabilises it (lone pair or alkyl), red if G is electron-withdrawing. Press Play to watch the charge move. The scale below places G by its effect on the rate.

effect of G—
rate vs benzene—
G directs to—
σ-complex—

Toxicity and carcinogenicity. Benzene and many polynuclear aromatic hydrocarbons are toxic. Long exposure to benzene vapour damages the bone marrow and can cause leukaemia, which is why its use as a solvent is now strictly limited and toluene is used instead. Hydrocarbons with four or more fused benzene rings — such as 1,2-benzanthracene, 3-methylcholanthrene and benzo[a]pyrene — are carcinogenic. They form in the incomplete combustion of organic matter (tobacco smoke, coal tar, vehicle exhaust, charred food). In the body they are oxidised to reactive epoxides that bind to DNA and cause mutations.

⚠️ JEE Main traps

1. Counting π electrons. Pyridine's N lone pair is not in the sextet; pyrrole's and furan's (one pair) are. A ring $\mathrm{CH_{2}}$ (cyclopentadiene, cycloheptatriene) kills aromaticity; the ions $\mathrm{C_{5}H_{5}^{-}}$ and $\mathrm{C_{7}H_{7}^{+}}$ are aromatic. Cyclooctatetraene is non-aromatic (tub), not antiaromatic.

2. Friedel–Crafts alkylation rearranges. 1-Chloropropane gives mainly cumene; 1-chloro-2-methylpropane gives tert-butylbenzene. For a straight chain use acylation + reduction.

3. Halogens are o/p directors but deactivating. Do not put chlorobenzene above benzene in a reactivity order; do not call Cl a meta director.

4. Aniline (and amines) fail Friedel–Crafts; nitrobenzene is too deactivated. Order of steps in a synthesis decides meta versus ortho/para.

5. Chlorine and benzene: $\mathrm{FeCl_{3}}$, dark → substitution ($\mathrm{C_{6}H_{5}Cl}$); sunlight, no catalyst → addition ($\mathrm{C_{6}H_{6}Cl_{6}}$, 3 mol $\mathrm{Cl_{2}}$).

Chlorobenzene undergoes nitration more slowly than benzene, yet gives mainly ortho and para products. This is because chlorine

Exercises

Atomic masses: H 1, C 12, N 14, O 16, S 32, Cl 35.5, Br 80. Molar volume at STP $22.7\ \mathrm{L\,mol^{-1}}$.

I
Nomenclature, isomers and the structure of benzene.
  • 1 Give IUPAC names: (a) m-xylene, (b) p-nitrotoluene, (c) o-chlorotoluene.
  • 2 Draw 1-bromo-3-chloro-5-iodobenzene and 2,4,6-trinitrotoluene.
  • 3 How many isomeric dichlorobenzenes are there?
  • 4 How many isomeric trichlorobenzenes are there? Name them.
  • 5 How many structural isomers have the formula $\mathrm{C_{6}H_{3}(CH_{3})ClBr}$ (three different substituents on one ring)?
  • 6 How many aromatic isomers have the formula $\mathrm{C_{8}H_{10}}$?
  • 7 How many σ bonds are there in a benzene molecule? How many π bonds (in one Kekulé structure)?
  • 8 Give two experimental facts that a single Kekulé structure cannot explain, and explain them.
1 (a) 1,3-dimethylbenzene; (b) 1-methyl-4-nitrobenzene (4-nitrotoluene); (c) 1-chloro-2-methylbenzene (2-chlorotoluene).
2 A ring with Br, Cl, I on alternate carbons 1, 3, 5; a toluene ring with $\mathrm{NO_{2}}$ at 2, 4 and 6 (both positions ortho and the one para to $\mathrm{CH_{3}}$).
3 $3$: 1,2-, 1,3- and 1,4-dichlorobenzene.
4 $3$: 1,2,3-, 1,2,4- and 1,3,5-trichlorobenzene.
5 $\mathrm{C_{6}H_{3}XYZ}$: $10$. (Fix X at C1; Y and Z can occupy two of the five other positions in $5\times4=20$ ways, and the mirror line through C1 pairs them up: $20/2=10$.)
6 $4$: ethylbenzene and o-, m-, p-xylene.
7 $6$ C–C + $6$ C–H = $12$ σ bonds; $3$ π bonds.
8 (i) Only one 1,2-disubstituted isomer exists (Kekulé predicts two); (ii) all C–C bonds are $139\ \mathrm{pm}$; (iii) benzene resists addition and its hydrogenation enthalpy is $152\ \mathrm{kJ\,mol^{-1}}$ smaller than expected. All follow from delocalisation of the six π electrons (resonance hybrid).
II
Aromaticity.
  • 1 How many π electrons does the tropylium ion $\mathrm{C_{7}H_{7}^{+}}$ have? Is it aromatic?
  • 2 Classify the cyclopropenyl cation and the cyclopropenyl anion.
  • 3 How many π electrons does naphthalene have? Is it aromatic?
  • 4 For the cyclooctatetraene dianion, find the value of $n$ in $4n+2$.
  • 5 Explain why the nitrogen of pyridine is basic but that of pyrrole is not.
  • 6 How many of the following are aromatic: benzene, cyclopentadiene, cyclopentadienyl anion, tropylium ion, cyclobutadiene, furan, cyclooctatetraene, thiophene?
  • 7 Cyclopentadiene ($\mathrm{p}K_{a}\approx16$) is about $10^{34}$ times more acidic than cyclopentane ($\mathrm{p}K_{a}\approx50$). Explain.
  • 8 Why does cyclooctatetraene decolourise bromine water while benzene does not?
1 Three C=C give $6$; the cationic carbon has an empty $p$ orbital, so the ring is fully conjugated: aromatic ($n=1$).
2 Cation: $2$ π electrons ($n=0$) → aromatic. Anion: $4$ → antiaromatic (planar, conjugated, $4n$).
3 Five C=C in a Kekulé structure: $10$ π electrons over the 10-carbon periphery, $n=2$ → aromatic.
4 $8+2=10=4n+2$, so $n=2$.
5 Pyridine's lone pair is in an $sp^{2}$ orbital in the ring plane, not part of the sextet, so it can bind $\mathrm{H^{+}}$ without loss of aromaticity. Pyrrole's lone pair is part of the sextet; protonating it would destroy aromaticity.
6 Benzene, cyclopentadienyl anion, tropylium, furan, thiophene: $5$.
7 Loss of $\mathrm{H^{+}}$ from the $\mathrm{CH_{2}}$ gives the aromatic cyclopentadienyl anion ($6$ π electrons): a very stable conjugate base. The cyclopentyl anion gets no such stabilisation. ($10^{50-16}=10^{34}$.)
8 Cyclooctatetraene is tub-shaped and non-aromatic: its four C=C behave as ordinary alkene bonds and add $\mathrm{Br_{2}}$. Addition to benzene would destroy its aromatic stabilisation.
III
Electrophilic substitution reactions.
  • 1 Write the equation for the formation of the nitronium ion in the nitrating mixture.
  • 2 $15.6\ \mathrm{g}$ of benzene is nitrated with an $80\%$ yield. What mass of nitrobenzene is obtained?
  • 3 Give the main product of benzene with 1-chloropropane and anhydrous $\mathrm{AlCl_{3}}$, and explain.
  • 4 What forms from benzene and 2-chloro-2-methylpropane / $\mathrm{AlCl_{3}}$? Would 1-chloro-2-methylpropane give a different product?
  • 5 Give the product of benzene with ethanoyl chloride / $\mathrm{AlCl_{3}}$ and explain why a second acyl group does not enter.
  • 6 How many moles of $\mathrm{Cl_{2}}$ add to one mole of benzene in bright sunlight? Name the product.
  • 7 How many moles of $\mathrm{H_{2}}$ are needed to hydrogenate one mole of styrene ($\mathrm{C_{6}H_{5}CH{=}CH_{2}}$) completely?
  • 8 $7.80\ \mathrm{g}$ of benzene is completely converted into toluene with $\mathrm{CH_{3}Cl/AlCl_{3}}$. What volume of HCl (at STP) is released?
  • 9 Why can chlorobenzene not be used to make diphenyl ($\mathrm{C_{6}H_{5}{-}C_{6}H_{5}}$) by a Friedel–Crafts reaction with benzene?
1 $\mathrm{HNO_{3}+2H_{2}SO_{4}\rightleftharpoons NO_{2}^{+}+H_{3}O^{+}+2HSO_{4}^{-}}$.
2 $\dfrac{15.6}{78}=0.200\ \mathrm{mol}$; $0.200\times123\times0.80=19.7\ \mathrm{g}$ ($M(\mathrm{C_{6}H_{5}NO_{2}})=72+5+14+32=123$).
3 Isopropylbenzene (cumene): the 1° propyl cation rearranges to the 2° isopropyl cation by a hydride shift.
4 tert-Butylbenzene. 1-Chloro-2-methylpropane gives the same product, because its 1° cation rearranges to the tert-butyl cation.
5 Acetophenone, $\mathrm{C_{6}H_{5}COCH_{3}}$; the C=O group ($-M$) deactivates the ring (and the ketone ties up $\mathrm{AlCl_{3}}$), so a second acylation does not occur.
6 $3$ mol: 1,2,3,4,5,6-hexachlorocyclohexane, $\mathrm{C_{6}H_{6}Cl_{6}}$ (BHC) — an addition, not a substitution.
7 $1$ (side-chain C=C) $+3$ (ring) $=4$ mol, giving ethylcyclohexane.
8 $0.100\ \mathrm{mol}$ benzene → $0.100\ \mathrm{mol}$ HCl → $2.27\ \mathrm{L}$.
9 The C–Cl bond is on an $sp^{2}$ carbon (strengthened by resonance with the ring), and the phenyl cation is far too unstable to form with $\mathrm{AlCl_{3}}$.
IV
Directive influence and synthesis.
  • 1 Classify as o/p or meta directors, activating or deactivating: $\mathrm{{-}OH}$, $\mathrm{{-}CHO}$, $\mathrm{{-}Cl}$, $\mathrm{{-}CH_{3}}$, $\mathrm{{-}NO_{2}}$, $\mathrm{{-}NHCOCH_{3}}$, $\mathrm{{-}CN}$, $\mathrm{{-}OCH_{3}}$.
  • 2 How many of the groups in part 1 are ortho/para directors?
  • 3 Arrange in order of decreasing reactivity towards bromination: benzene, phenol, nitrobenzene, toluene, chlorobenzene.
  • 4 Give the main product(s) of nitrating (a) bromobenzene, (b) benzoic acid, (c) acetanilide ($\mathrm{C_{6}H_{5}NHCOCH_{3}}$).
  • 5 How many different ring-monochloro derivatives of toluene are possible?
  • 6 How many ring-monobromo derivatives can 1,2,4-trimethylbenzene give? And mesitylene?
  • 7 The $\mathrm{{-}N(CH_{3})_{3}^{+}}$ group has no π bond, yet it is a strong meta director. Explain.
  • 8 Starting from benzene, outline syntheses of (a) 3-nitroacetophenone, (b) 4-nitrotoluene.
1 o/p, activating: $\mathrm{{-}OH}$, $\mathrm{{-}CH_{3}}$, $\mathrm{{-}NHCOCH_{3}}$, $\mathrm{{-}OCH_{3}}$. o/p, deactivating: $\mathrm{{-}Cl}$. meta, deactivating: $\mathrm{{-}CHO}$, $\mathrm{{-}NO_{2}}$, $\mathrm{{-}CN}$.
2 $5$ ($\mathrm{OH,\ Cl,\ CH_{3},\ NHCOCH_{3},\ OCH_{3}}$).
3 Phenol $\gt$ toluene $\gt$ benzene $\gt$ chlorobenzene $\gt$ nitrobenzene.
4 (a) 1-bromo-2-nitro- and 1-bromo-4-nitrobenzene; (b) 3-nitrobenzoic acid; (c) mainly 4-nitroacetanilide (para, the bulky group hinders ortho), some ortho.
5 $3$: 2-, 3- and 4-chlorotoluene (2 and 6 are equivalent, as are 3 and 5).
6 1,2,4-Trimethylbenzene: free positions 3, 5, 6, all different → $3$. Mesitylene: the three free positions are equivalent → $1$.
7 The positive nitrogen withdraws electrons strongly by $-I$ and has no lone pair to donate. Ortho/para σ-complexes would put $+$ next to $\mathrm{N^{+}}$ — very unfavourable — so meta attack is least slowed.
8 (a) $\mathrm{CH_{3}COCl/AlCl_{3}}$ → acetophenone; then $\mathrm{HNO_{3}/H_{2}SO_{4}}$ (the acetyl group directs meta). (Nitrating first would fail: nitrobenzene does not undergo Friedel–Crafts reactions.) (b) $\mathrm{CH_{3}Cl/AlCl_{3}}$ (excess benzene) → toluene; then nitrate and separate the para isomer from the ortho.
🎯 Exam corner JEE Main · MCQJEE Main · Numerical

E1. JEE Main · MCQ Which of the following is aromatic? (A) cyclopenta-1,3-diene (B) cycloocta-1,3,5,7-tetraene (C) cyclopropenyl cation (D) cyclobuta-1,3-diene

Check each (A) has an $sp^{3}$ $\mathrm{CH_{2}}$: non-aromatic. (B) 8 π electrons, tub-shaped: non-aromatic. (C) 2 π electrons, planar, every carbon $sp^{2}$: $4(0)+2$ — aromatic. (D) 4 π electrons: antiaromatic.
Answer (C).

E2. JEE Main · Numerical How many structural isomers are possible for a benzene ring carrying two chlorine atoms and one methyl group, $\mathrm{C_{6}H_{3}Cl_{2}CH_{3}}$? Give the answer to the nearest integer.

Place Cl, Cl o-dichloro: the methyl can go to 2 distinct places; m-dichloro: 3; p-dichloro: 1.
Total $2+3+1=6$ (the $\mathrm{C_{6}H_{3}X_{2}Y}$ pattern).
Answer $6$.
⏱ Shortcut Learn the series for 3 substituents: $\mathrm{X_{3}}$ 3, $\mathrm{X_{2}Y}$ 6, $\mathrm{XYZ}$ 10.

E3. JEE Main · MCQ Benzene is treated with 1-chloro-2-methylpropane in the presence of anhydrous $\mathrm{AlCl_{3}}$. The major product is (A) tert-butylbenzene (B) isobutylbenzene (C) sec-butylbenzene (D) butylbenzene

Carbocation $\mathrm{(CH_{3})_{2}CH{-}CH_{2}^{+}}$ (1°) undergoes a 1,2-hydride shift to $\mathrm{(CH_{3})_{3}C^{+}}$ (3°), which alkylates the ring.
Answer (A).
⏱ Shortcut In F–C alkylation, expect the most stable cation reachable by one shift.

E4. JEE Main · Numerical $39.0\ \mathrm{g}$ of benzene is nitrated with a mixture of concentrated nitric and sulphuric acids; the yield of nitrobenzene is $80\%$. Find the mass of nitrobenzene obtained, in grams ($\mathrm{H}=1$, $\mathrm{C}=12$, $\mathrm{N}=14$, $\mathrm{O}=16$). Give the answer to the nearest integer.

Moles $\dfrac{39.0}{78}=0.500\ \mathrm{mol}$ benzene → $0.500\ \mathrm{mol}$ nitrobenzene at $100\%$.
Mass $0.500\times123\times0.80=49.2\ \mathrm{g}$.
Answer $49$.

E5. JEE Main · MCQ The correct order of reactivity towards electrophilic substitution is (A) benzene $\gt$ toluene $\gt$ chlorobenzene $\gt$ nitrobenzene (B) toluene $\gt$ chlorobenzene $\gt$ benzene $\gt$ nitrobenzene (C) nitrobenzene $\gt$ chlorobenzene $\gt$ benzene $\gt$ toluene (D) toluene $\gt$ benzene $\gt$ chlorobenzene $\gt$ nitrobenzene

Effects $\mathrm{CH_{3}}$ activates (+I, hyperconjugation); Cl deactivates ($-I\gt+M$); $\mathrm{NO_{2}}$ deactivates strongly ($-M$, $-I$).
Answer (D).

E6. JEE Main · Numerical How many of the following substituents are ortho/para directors in electrophilic aromatic substitution: $\mathrm{{-}NH_{2}}$, $\mathrm{{-}SO_{3}H}$, $\mathrm{{-}Br}$, $\mathrm{{-}C_{2}H_{5}}$, $\mathrm{{-}COCH_{3}}$, $\mathrm{{-}NO_{2}}$, $\mathrm{{-}OC_{2}H_{5}}$, $\mathrm{{-}CN}$? Give the answer to the nearest integer.

Sort o/p: $\mathrm{{-}NH_{2}}$ (lone pair), $\mathrm{{-}Br}$ (lone pair, though deactivating), $\mathrm{{-}C_{2}H_{5}}$ (alkyl), $\mathrm{{-}OC_{2}H_{5}}$ (lone pair). meta: $\mathrm{{-}SO_{3}H}$, $\mathrm{{-}COCH_{3}}$, $\mathrm{{-}NO_{2}}$, $\mathrm{{-}CN}$.
Answer $4$.
⏱ Shortcut First atom with a lone pair, or alkyl → o/p. First atom multiply bonded to O/N, or positive → meta.
🔬 Research–Teaching NexusResearch-tutored · optional, about 45 minutes

Research question. How much benzene do people in a city actually breathe, where does it come from, and how does it compare with the limits set to protect against leukaemia?

Why it matters. Benzene is a known human carcinogen with no completely safe level. Petrol contains up to about $1\%$ benzene by volume; it escapes at fuel stations and in exhaust, and it is also present in tobacco smoke. India's National Ambient Air Quality Standards set an annual average limit of $5\ \mu\mathrm{g\,m^{-3}}$ for benzene, the same value as the European Union's limit.

What to do.

  1. Find published monitoring data (a pollution-control board, a city air-quality report, or a peer-reviewed study) giving benzene concentrations near a busy road, near a fuel station and in a residential area.
  2. Convert the values to ppb by volume: at $298\ \mathrm{K}$ and $1\ \mathrm{atm}$, $1\ \mathrm{ppb}$ of benzene is $\dfrac{78}{24.5}\approx3.2\ \mu\mathrm{g\,m^{-3}}$.
  3. An adult breathes about $20\ \mathrm{m^{3}}$ of air a day. Estimate the daily intake (in µg) in each place, and compare with the intake of a smoker (find a value for the benzene delivered per cigarette).
  4. Explain, using what you know about aromatic rings, why benzene is very stable in air yet harmful once oxidised in the liver (look up "benzene oxide" and its metabolites).
  5. List two engineering measures that reduce exposure (vapour recovery at fuel pumps, limits on benzene in petrol) and find when they were introduced in one country.

Tools: Published air-quality data and reports, a spreadsheet.

Hand in: A table of concentrations (µg m⁻³ and ppb) and daily intakes; a bar chart comparing the places and a smoker; one paragraph of recommendations.

Going further. Toluene has largely replaced benzene as an industrial solvent. Its side chain gives the liver an easier route (oxidation of $\mathrm{CH_{3}}$ to benzoic acid, which is excreted). Why does that make it much less carcinogenic?

Instructor note: roadside urban values in many studies are a few µg m⁻³ (often 1–10), higher near fuel stations; a smoker inhales tens of µg per cigarette, so smoking usually dominates personal exposure. The ppb conversion and the intake arithmetic are short; the main learning is in reading monitoring reports critically (averaging period, location of the monitor).

🧪 Self-check quiz

0/5 correct

Q1. The carbon–carbon bond length in benzene is

Q2. A planar, cyclic, fully conjugated species is aromatic if its number of π electrons is

Q3. The electrophile in the nitration of benzene is

Q4. Which group is a meta director?

Q5. Friedel–Crafts methylation of benzene gives some dimethylbenzenes as well as toluene because