17.1 Alcohols
An –OH group on an $sp^{3}$ carbon turns a hydrocarbon into an alcohol: a molecule that hydrogen-bonds, behaves as a very weak acid and a weak base, and reacts either by breaking its O–H bond or its C–O bond. The class of the alcohol — 1°, 2° or 3° — decides how it is made, how fast it forms a carbocation and what it gives on oxidation.
Petrol pumps across India now sell E20 fuel — petrol with 20% ethanol made by fermenting sugar-cane molasses and grain. Hand sanitiser is about 70% ethanol or propan-2-ol, cough syrups and perfumes use ethanol as a solvent, antifreeze is ethane-1,2-diol, and glycerol (propane-1,2,3-triol) keeps soaps and creams moist. Methanol looks and smells almost exactly like ethanol, yet a few tens of millilitres can blind or kill — the body oxidises it to methanal and methanoic acid. All of these are alcohols: compounds in which a hydroxyl group is attached to a saturated carbon atom.
Alcohols are the crossroads of organic synthesis. They are made from alkenes, from carbonyl compounds and from haloalkanes, and they in turn give haloalkanes, alkenes, ethers, esters, aldehydes, ketones and acids. In this section we classify and name them, learn four general routes to them, explain their high boiling points and weak acidity by hydrogen bonding and electronic effects, and then study their reactions in two families — those that break the O–H bond and those that break the C–O bond — including the Lucas test for telling 1°, 2° and 3° alcohols apart and the full mechanism of acid-catalysed dehydration with carbocation rearrangement. You will need IUPAC naming from Section 14.1, carbocations and electronic effects from Section 14.3, additions to alkenes from Section 15.2, the substitution mechanisms of Section 16.2 and $\mathrm{p}K_{a}$ from Section 6.3.
Structure, classification and naming
Replace one hydrogen of an alkane by –OH and you have an alcohol, general formula $\mathrm{C_{n}H_{2n+1}OH}$ (or $\mathrm{R{-}OH}$) for the saturated open-chain ones. The carbon atom that carries the –OH group is called the carbinol carbon. Everything about the classification of an alcohol is decided by that one carbon.
An alcohol is a compound in which one or more hydroxyl groups are bonded to $sp^{3}$-hybridised carbon atoms. An –OH group on an $sp^{2}$ carbon of a C=C is an enol (usually unstable), and one on a benzene-ring carbon makes a phenol (Section 17.2) — neither is an alcohol.
- By the number of –OH groups: monohydric (one –OH: ethanol), dihydric or diols (two: ethane-1,2-diol, "glycol"), trihydric or triols (three: propane-1,2,3-triol, "glycerol"), polyhydric (more).
- By the carbinol carbon: an alcohol is primary (1°), secondary (2°) or tertiary (3°) when the carbinol carbon is bonded to one, two or three other carbon atoms: $\mathrm{RCH_{2}OH}$, $\mathrm{R_{2}CHOH}$, $\mathrm{R_{3}COH}$. Methanol, $\mathrm{CH_{3}OH}$, with no carbon on the carbinol carbon, is grouped with the 1° alcohols.
- Allylic alcohols have the –OH on an $sp^{3}$ carbon next to a C=C ($\mathrm{CH_{2}{=}CH{-}CH_{2}OH}$); benzylic alcohols have it on an $sp^{3}$ carbon next to a benzene ring ($\mathrm{C_{6}H_{5}CH_{2}OH}$). Each can itself be 1°, 2° or 3°.
Structure. The oxygen of an alcohol has two σ bonds and two lone pairs, so it is $sp^{3}$ hybridised and the molecule is bent at oxygen like water. In methanol the C–O–H angle is $108.9^\circ$ — slightly less than the tetrahedral $109.5^\circ$ because the two lone pairs repel the bonding pairs more strongly than bonding pairs repel each other (VSEPR, Section 3.2). The C–O bond (142 pm) and the O–H bond are both polar, with oxygen the negative end; this polarity and the O–H hydrogen are the source of everything that follows — hydrogen bonding, acidity and the reactions at both bonds.
- Choose the longest carbon chain that contains the carbon bearing –OH (for several –OH groups, the chain containing as many of them as possible).
- Number the chain so that the carbon bearing –OH gets the lowest locant — –OH outranks C=C, C≡C, halogens and alkyl groups.
- Replace the final -e of the alkane name by -ol and put the locant just before it: $\mathrm{CH_{3}CH(OH)CH_{3}}$ is propan-2-ol. For two or three –OH groups keep the -e and add -diol, -triol: ethane-1,2-diol, propane-1,2,3-triol.
- Name and number the other substituents as prefixes in alphabetical order (2-methylpropan-2-ol); a ring alcohol is a cycloalkanol, with C1 at the –OH carbon (2-methylcyclohexanol).
Common names use the alkyl group + "alcohol": isopropyl alcohol (propan-2-ol), tert-butyl alcohol (2-methylpropan-2-ol), benzyl alcohol (phenylmethanol), allyl alcohol (prop-2-en-1-ol).
| Condensed formula | IUPAC name | Common name | Class |
|---|---|---|---|
| $\mathrm{CH_{3}OH}$ | methanol | methyl alcohol, wood spirit | 1° (methanol) |
| $\mathrm{CH_{3}CH_{2}CH_{2}CH_{2}OH}$ | butan-1-ol | n-butyl alcohol | 1° |
| $\mathrm{CH_{3}CH(OH)CH_{2}CH_{3}}$ | butan-2-ol | sec-butyl alcohol | 2° |
| $\mathrm{(CH_{3})_{2}CHCH_{2}OH}$ | 2-methylpropan-1-ol | isobutyl alcohol | 1° |
| $\mathrm{(CH_{3})_{3}COH}$ | 2-methylpropan-2-ol | tert-butyl alcohol | 3° |
| $\mathrm{HOCH_{2}CH(OH)CH_{2}OH}$ | propane-1,2,3-triol | glycerol | two 1° and one 2° –OH |
Which of the following is a tertiary alcohol?
General methods of preparation
Four routes cover almost every alcohol you will meet in JEE Main: add water across a C=C, reduce a C=O, add a Grignard reagent to a C=O, or substitute the halogen of a haloalkane. The first two decide where the –OH ends up; the third also builds new C–C bonds, and so makes the carbon skeleton bigger.
1. From alkenes — acid-catalysed hydration. An alkene adds water in the presence of an acid catalyst (dilute $\mathrm{H_{2}SO_{4}}$) to give an alcohol, following Markovnikov's rule (Section 15.2). The mechanism has three steps: the π bond takes a proton from $\mathrm{H_{3}O^{+}}$ to make the more stable carbocation; water attacks the carbocation; and a proton is lost.
Because a carbocation is formed, hydration can be accompanied by a rearrangement (a 1,2-shift of H or $\mathrm{CH_{3}}$, see below), and it gives the 1° alcohol only from ethene.
2. From alkenes — hydroboration–oxidation. Diborane, $\mathrm{(BH_{3})_{2}}$ (usually as $\mathrm{BH_{3}}$ in tetrahydrofuran, THF), adds across the C=C with boron going to the less substituted carbon and hydrogen to the more substituted one; three alkene molecules use up the three B–H bonds to give a trialkylborane. Hydrogen peroxide in aqueous NaOH then replaces each C–B bond by C–OH with the same geometry:
$$\mathrm{3\,CH_{3}CH{=}CH_{2}\xrightarrow{(BH_{3})_{2}/THF}(CH_{3}CH_{2}CH_{2})_{3}B\xrightarrow[\text{NaOH(aq)}]{3\,H_{2}O_{2}}3\,CH_{3}CH_{2}CH_{2}OH+B(OH)_{3}}$$The net result is addition of H and OH across the double bond in the anti-Markovnikov sense, without a carbocation — so no rearrangement occurs, and H and OH add to the same face (syn addition).
- Acid-catalysed hydration ($\mathrm{H_{2}O/H^{+}}$): Markovnikov — –OH on the carbon that gives the more stable carbocation; rearrangement possible whenever a 1,2-H or 1,2-$\mathrm{CH_{3}}$ shift gives a more stable carbocation.
- Hydroboration–oxidation ($\mathrm{(BH_{3})_{2}}$, then $\mathrm{H_{2}O_{2}/OH^{-}}$): anti-Markovnikov — –OH on the less substituted carbon; no carbocation, no rearrangement; syn addition. A terminal alkene $\mathrm{RCH{=}CH_{2}}$ gives the 1° alcohol $\mathrm{RCH_{2}CH_{2}OH}$.
- The two methods give the same alcohol only when the two alkene carbons are equivalent (ethene, but-2-ene, cyclohexene).
3. From carbonyl compounds — reduction. Hydrogen adds across C=O just as across C=C. Catalytic hydrogenation ($\mathrm{H_{2}}$ with finely divided Pt, Pd or Ni) or the hydride reagents sodium borohydride, $\mathrm{NaBH_{4}}$, and lithium aluminium hydride, $\mathrm{LiAlH_{4}}$ (followed by water), convert aldehydes to 1° alcohols and ketones to 2° alcohols:
$$\mathrm{RCHO\xrightarrow{NaBH_{4}\ or\ H_{2}/Pd}RCH_{2}OH\ (1^{\circ})},$$ $$\mathrm{R_{2}CO\xrightarrow{NaBH_{4}\ or\ H_{2}/Ni}R_{2}CHOH\ (2^{\circ})}.$$Carboxylic acids are harder to reduce: only the powerful $\mathrm{LiAlH_{4}}$ reduces them, to 1° alcohols ($\mathrm{RCOOH\rightarrow RCH_{2}OH}$). Industrially the acid is first converted into an ester, which is hydrogenated over a catalyst. $\mathrm{NaBH_{4}}$ leaves C=C and –COOH untouched, so it reduces a C=O selectively.
4. From carbonyl compounds — Grignard reagents. An alkylmagnesium halide $\mathrm{RMgX}$ (made from RX and Mg in dry ether) behaves as a source of the carbanion $\mathrm{R^{-}}$. It adds to the carbon of C=O, and the magnesium alkoxide formed is hydrolysed by dilute acid. The chemistry of this nucleophilic addition is developed in Section 17.3; here we only need the product classes:
$$\mathrm{R_{2}C{=}O+R'MgX\rightarrow R_{2}C(R'){-}OMgX}$$ $$\mathrm{R_{2}C(R'){-}OMgX\xrightarrow{H_{3}O^{+}}R_{2}C(R'){-}OH+Mg(OH)X}$$- $\mathrm{R'MgX}$ + methanal, $\mathrm{HCHO}$ → 1° alcohol $\mathrm{R'CH_{2}OH}$ (one carbon added).
- $\mathrm{R'MgX}$ + any other aldehyde $\mathrm{RCHO}$ → 2° alcohol $\mathrm{RCH(OH)R'}$.
- $\mathrm{R'MgX}$ + ketone $\mathrm{R_{2}CO}$ → 3° alcohol $\mathrm{R_{2}C(OH)R'}$.
- An ester $\mathrm{RCOOR''}$ uses two moles of $\mathrm{R'MgX}$ (the first gives a ketone, which reacts again) → 3° alcohol $\mathrm{RC(OH)R'_{2}}$ with two identical groups from the reagent.
Conditions: the reagent and the carbonyl compound must contain no acidic hydrogen (–OH, –NH, –COOH, ≡C–H, water) — these destroy $\mathrm{RMgX}$, giving the alkane $\mathrm{RH}$. The solvent is dry ether.
Other routes. Haloalkanes give alcohols with aqueous KOH by nucleophilic substitution (Section 16.2) — useful for 1° halides, but 3° halides give mainly alkenes. Two alcohols are made on a huge scale: methanol by catalytic hydrogenation of carbon monoxide, $\mathrm{CO(g)+2H_{2}(g)\rightarrow CH_{3}OH(g)}$ over $\mathrm{ZnO{-}Cr_{2}O_{3}}$ at 573–673 K and 200–300 atm, and ethanol by fermentation: sucrose is hydrolysed by the enzyme invertase to glucose and fructose, which the enzyme zymase of yeast converts to ethanol and carbon dioxide, $\mathrm{C_{6}H_{12}O_{6}\rightarrow 2C_{2}H_{5}OH+2CO_{2}}$, in the absence of air.
Which reagent(s) convert propanone into 2-methylpropan-2-ol?
Physical properties, hydrogen bonding and acidity
Boiling points. Ethanol ($M=46$) boils at 351 K, while propane ($M=44$) boils at 231 K and its isomer methoxymethane ($M=46$) at 248 K. The difference is intermolecular hydrogen bonding (Section 3.4): the strongly polar O–H hydrogen of one molecule is attracted to a lone pair on the oxygen of a neighbour, $\mathrm{O{-}H\cdots O}$. These bonds (about 20–25 kJ mol⁻¹ each) must be broken to boil the liquid. An ether has lone pairs but no O–H hydrogen, so it cannot hydrogen-bond with itself; an alkane has neither.
- Within a homologous series boiling point rises with chain length (larger dispersion forces): 338, 351, 370, 391 K for methanol to butan-1-ol.
- Among isomers it falls with branching (smaller surface area): butan-1-ol 391 K, 2-methylpropan-1-ol 381 K, butan-2-ol 373 K, 2-methylpropan-2-ol 355 K.
- Solubility in water: alcohols hydrogen-bond with water too, so methanol, ethanol and propanol mix with water in all proportions. As the hydrocarbon part grows, the molecule becomes more like an alkane: butan-1-ol dissolves to only about 8 g per 100 g of water, hexan-1-ol to under 1 g. Branching (a more compact hydrocarbon part) and more –OH groups raise solubility.
In the boiling-point lab set $n=4$ (butan-1-ol, $M=74$). Pentane has almost the same molar mass ($M=72$). By about how much does the alcohol's boiling point exceed the alkane's?
Acidic nature. The O–H bond is polar, so an alcohol can give up its proton — but only to a very strong base or to an active metal. Sodium and potassium react (gently, compared with water) to give hydrogen and a metal alkoxide:
$$\mathrm{2CH_{3}CH_{2}OH(l)+2Na(s)\rightarrow 2CH_{3}CH_{2}O^{-}Na^{+}(sol)+H_{2}(g)}$$Every O–H group can react, so with excess sodium one mole of a monohydric alcohol gives $\tfrac12$ mol $\mathrm{H_{2}}$, a diol 1 mol and a triol $\tfrac32$ mol. Aluminium reacts similarly when warmed, giving aluminium alkoxides. Alcohols do not react appreciably with NaOH: the hydroxide ion is too weak a base to remove a proton that is held about as firmly as water's.
In water, ethanol ($\mathrm{p}K_{a}\approx15.9$) is slightly weaker as an acid than water itself ($\mathrm{p}K_{a}=15.7$), while methanol ($\mathrm{p}K_{a}\approx15.5$) is slightly stronger. The conjugate base explains why. In $\mathrm{RO^{-}}$ the negative charge sits on oxygen; alkyl groups push electron density towards it (+I effect, Section 14.3), which intensifies the charge, and bulky groups also keep solvent molecules away, so the ion is less stabilised by hydrogen bonding to water. Both effects grow with the number of alkyl groups on the carbinol carbon.
In solution the acid strength order is $$\mathrm{CH_{3}OH\gt RCH_{2}OH\ (1^{\circ})\gt R_{2}CHOH\ (2^{\circ})\gt R_{3}COH\ (3^{\circ})}$$ with approximate $\mathrm{p}K_{a}$ values 15.5 (methanol), 15.9 (ethanol), about 17 (propan-2-ol) and about 18 (2-methylpropan-2-ol); water ($15.7$) lies between methanol and ethanol. Electron-withdrawing groups near the –OH raise acidity: 2,2,2-trifluoroethanol has $\mathrm{p}K_{a}\approx12.4$.
Consequently alkoxide ions are stronger bases than hydroxide: $\mathrm{RO^{-}+H_{2}O\rightarrow ROH+OH^{-}}$ goes essentially to completion, and sodium ethoxide must be made and used in dry ethanol. Alcohols are also weak bases: the oxygen lone pairs accept a proton from strong acids to give oxonium ions $\mathrm{R{-}\overset{+}{O}H_{2}}$ — the first step of every acid-catalysed C–O cleavage below.
Ethanol ($M=46$) boils at 351 K but methoxymethane ($M=46$) boils at 248 K. The main reason is that
Reactions of alcohols
An alcohol can react in two ways. It can lose the hydrogen of O–H (acting as an acid or as a nucleophile through its oxygen) — then the C–O bond survives, and the order of reactivity is $1^{\circ}\gt2^{\circ}\gt3^{\circ}$. Or it can lose the whole –OH group by breaking C–O — then a carbocation (or a carbocation-like transition state) is involved, and the order is reversed, $3^{\circ}\gt2^{\circ}\gt1^{\circ}$. Oxidation is a third family, in which the carbinol carbon loses hydrogen.
Reactions breaking O–H. Besides the reaction with Na, K and Al above, alcohols form esters.
Esterification is the reaction of an alcohol with a carboxylic acid (or with an acid chloride or anhydride) to give an ester. With a carboxylic acid it needs an acid catalyst (a few drops of conc. $\mathrm{H_{2}SO_{4}}$) and is reversible; water is removed as it forms to drive the equilibrium to the right:
$$\mathrm{RCOOH+R'OH\ \overset{H^{+}}{\rightleftharpoons}\ RCOOR'+H_{2}O}$$With an acid chloride the reaction goes to completion; a base such as pyridine is added to remove the HCl formed: $\mathrm{RCOCl+R'OH\rightarrow RCOOR'+HCl}$. Isotope labelling with $\mathrm{^{18}O}$ in the alcohol shows the label ends up in the ester: the alcohol keeps its oxygen and loses only its H, while the acid loses its OH.
Reactions breaking C–O. $\mathrm{OH^{-}}$ is a very poor leaving group, so the –OH must first be converted into something that leaves easily — either protonated by a strong acid (it then leaves as $\mathrm{H_{2}O}$) or bonded to phosphorus or sulphur.
- Hydrogen halides: $\mathrm{ROH+HX\rightarrow RX+H_{2}O}$. The order of reactivity is $\mathrm{HI\gt HBr\gt HCl}$ and $3^{\circ}\gt2^{\circ}\gt1^{\circ}$. A 3° alcohol reacts with conc. HCl at room temperature by the $\mathrm{S_{N}1}$ path: protonation, loss of water to give a carbocation, attack by $\mathrm{Cl^{-}}$. 1° and 2° alcohols need anhydrous $\mathrm{ZnCl_{2}}$ as a Lewis-acid catalyst (it bonds to the oxygen and helps C–O break).
- Phosphorus halides: $\mathrm{3ROH+PX_{3}\rightarrow3RX+H_{3}PO_{3}}$ ($\mathrm{PBr_{3}}$, $\mathrm{PI_{3}}$ made in situ from red P and $\mathrm{Br_{2}}$ or $\mathrm{I_{2}}$); $\mathrm{ROH+PCl_{5}\rightarrow RCl+POCl_{3}+HCl}$.
- Thionyl chloride: $\mathrm{ROH+SOCl_{2}\rightarrow RCl+SO_{2}(g)+HCl(g)}$ — the best way to a pure chloroalkane, because both by-products are gases that escape (Section 16.1).
Lucas reagent is a solution of anhydrous $\mathrm{ZnCl_{2}}$ in concentrated HCl. Alcohols of low molar mass dissolve in it, but the chloroalkanes they form do not: the solution turns cloudy (turbid) as the insoluble chloride separates. The time taken measures how fast the carbocation forms:
- 3° alcohol: turbidity immediately at room temperature;
- 2° alcohol: turbidity within about 5 minutes;
- 1° alcohol: no turbidity at room temperature (only on heating).
Allylic and benzylic alcohols, whose carbocations are resonance-stabilised, react as fast as 3° alcohols. The test works for alcohols that are soluble in the reagent (up to about six carbons).
Dehydration. Heated with a strong acid, an alcohol loses a molecule of water to give an alkene — the reverse of hydration. The ease of dehydration follows the stability of the carbocation, which shows up in the conditions needed:
$$\mathrm{C_{2}H_{5}OH\xrightarrow[443\ K]{conc.\ H_{2}SO_{4}}CH_{2}{=}CH_{2}+H_{2}O}$$ $$\mathrm{CH_{3}CH(OH)CH_{3}\xrightarrow[440\ K]{85\%\ H_{3}PO_{4}}CH_{3}CH{=}CH_{2}+H_{2}O}$$ $$\mathrm{(CH_{3})_{3}COH\xrightarrow[358\ K]{20\%\ H_{3}PO_{4}}(CH_{3})_{2}C{=}CH_{2}+H_{2}O}$$The mechanism (shown for ethanol) has three steps. The slow step is the formation of the carbocation, so the rate follows carbocation stability, $3^{\circ}\gt2^{\circ}\gt1^{\circ}$. For a 1° alcohol a free 1° carbocation is very unstable, and the loss of water and of the β-hydrogen probably happen together; but the stepwise picture predicts the products correctly and is the one used in JEE Main.
- Protonation of the –OH oxygen (fast, reversible) gives the oxonium ion $\mathrm{R{-}\overset{+}{O}H_{2}}$.
- Loss of water gives the carbocation — the slow, rate-determining step. Ease of dehydration: $3^{\circ}\gt2^{\circ}\gt1^{\circ}$.
- If a hydrogen, methyl or other group on the neighbouring carbon can move with its electron pair (1,2-shift) to give a more stable carbocation (2° → 3°, or to an allylic/benzylic cation), it does so before the next step.
- Loss of a β-hydrogen (from a carbon next to the positive carbon) gives the alkene and regenerates the acid. When there is a choice, the more substituted alkene is the major product (Saytzeff rule), and trans is preferred to cis.
Conditions matter: with excess ethanol at a lower temperature (conc. $\mathrm{H_{2}SO_{4}}$, 413 K) a second alcohol molecule attacks the oxonium ion instead, and ethoxyethane (diethyl ether) is formed — see Section 17.2.
Oxidation. Oxidation of an alcohol removes the hydrogen of O–H and a hydrogen from the carbinol carbon, creating C=O. So the product depends on how many hydrogens the carbinol carbon carries:
$$\mathrm{RCH_{2}OH\xrightarrow{[O]}RCHO\xrightarrow{[O]}RCOOH};\qquad\mathrm{R_{2}CHOH\xrightarrow{[O]}R_{2}CO}$$- Strong oxidants — acidified potassium dichromate, $\mathrm{K_{2}Cr_{2}O_{7}/H_{2}SO_{4}}$, or potassium permanganate, $\mathrm{KMnO_{4}}$: 1° alcohol → carboxylic acid (via the aldehyde); 2° alcohol → ketone; 3° alcohols resist oxidation (only under drastic conditions do they break up into smaller acids). The orange dichromate is reduced to green $\mathrm{Cr^{3+}}$ — the basis of the old breath-analyser test.
- Mild, anhydrous oxidants stop a 1° alcohol at the aldehyde: pyridinium chlorochromate, PCC ($\mathrm{C_{5}H_{5}NH^{+}ClCrO_{3}^{-}}$) in dichloromethane, or $\mathrm{CrO_{3}}$ in an anhydrous medium. 2° alcohols still give ketones.
- Heated copper, 573 K (dehydrogenation, no oxygen added): 1° → aldehyde + $\mathrm{H_{2}}$; 2° → ketone + $\mathrm{H_{2}}$; 3° alcohols, having no H on the carbinol carbon, are dehydrated to alkenes instead.
Electron bookkeeping (Section 7.1): $\mathrm{RCH_{2}OH\rightarrow RCHO}$ and $\mathrm{R_{2}CHOH\rightarrow R_{2}CO}$ each release $2e^{-}$; $\mathrm{RCH_{2}OH\rightarrow RCOOH}$ releases $4e^{-}$; $\mathrm{Cr_{2}O_{7}^{2-}\rightarrow2Cr^{3+}}$ takes $6e^{-}$ and $\mathrm{MnO_{4}^{-}\rightarrow Mn^{2+}}$ takes $5e^{-}$.
For example, the breath-analyser reaction (ethanol to ethanal) is
$$\mathrm{3CH_{3}CH_{2}OH+Cr_{2}O_{7}^{2-}+8H^{+}\rightarrow3CH_{3}CHO+2Cr^{3+}+7H_{2}O},$$and the copper reactions are
$$\mathrm{CH_{3}CH_{2}OH\xrightarrow{Cu,\ 573\ K}CH_{3}CHO+H_{2}};\qquad\mathrm{(CH_{3})_{3}COH\xrightarrow{Cu,\ 573\ K}(CH_{3})_{2}C{=}CH_{2}+H_{2}O}.$$Uses. Methanol is a solvent and the raw material for methanal (formaldehyde) and many chemicals; it is highly poisonous. Ethanol is a solvent for paints, varnishes, perfumes and medicines, the starting point for ethanal, ethanoic acid and esters, a fuel and fuel additive (E20 petrol), and the active ingredient of sanitisers; industrial ethanol is made unfit for drinking ("denatured") by adding copper sulphate and pyridine. Ethane-1,2-diol is an antifreeze and makes polyester; glycerol is used in cosmetics, foods, inks and explosives (nitroglycerine).
In the carbocation lab choose 3,3-dimethylbutan-2-ol. Which alkene is the major product of acid-catalysed dehydration?
1. "Hydration" is not one reaction. $\mathrm{H_{2}O/H^{+}}$ gives the Markovnikov alcohol and may rearrange; $\mathrm{(BH_{3})_{2}}$ then $\mathrm{H_{2}O_{2}/OH^{-}}$ gives the anti-Markovnikov alcohol and never rearranges. Read the reagent before you write the product.
2. Stopping at the aldehyde. Acidified $\mathrm{K_{2}Cr_{2}O_{7}}$ and $\mathrm{KMnO_{4}}$ take a 1° alcohol all the way to the acid. Only PCC (or anhydrous $\mathrm{CrO_{3}}$, or Cu at 573 K) stops at the aldehyde.
3. Two opposite orders. Acidity of alcohols: $1^{\circ}\gt2^{\circ}\gt3^{\circ}$ (O–H cleavage). Reactivity with HX, Lucas test and dehydration: $3^{\circ}\gt2^{\circ}\gt1^{\circ}$ (C–O cleavage, carbocation). Decide first which bond breaks.
4. Forgetting the shift. Whenever the first carbocation is 2° (or 1°) and the next carbon is more substituted, look for a 1,2-H or 1,2-$\mathrm{CH_{3}}$ shift before choosing the alkene. Neopentyl-type and 3,3-dimethylbutan-2-yl systems are favourite JEE examples.
5. Lucas test details. 1° alcohols give no turbidity at room temperature (not "after a long time"); allylic and benzylic alcohols behave like 3°; 3° alcohols over copper are dehydrated, not dehydrogenated.
An alcohol $\mathrm{C_{5}H_{12}O}$ gives turbidity with Lucas reagent after about 5 minutes and is oxidised by acidified dichromate to a ketone. It could be
Exercises
Use $M$: H 1, C 12, O 16, Na 23, Cr 52, K 39. Gas volumes at STP: $22.4\ \mathrm{L\,mol^{-1}}$. "Excess sodium" means every O–H group reacts.
- 1 Classify as 1°, 2° or 3° (and as allylic or benzylic where it applies): (a) propan-2-ol (b) 2-methylbutan-2-ol (c) phenylmethanol (d) prop-2-en-1-ol (e) cyclohexanol. How many of them are 2°?
- 2 Give the IUPAC name of $\mathrm{CH_{3}CH(CH_{3})CH_{2}CH(OH)CH_{3}}$.
- 3 Name $\mathrm{HOCH_{2}CH_{2}OH}$ and $\mathrm{HOCH_{2}CH(OH)CH_{2}OH}$ by IUPAC rules and say why the "e" of the alkane name is kept.
- 4 Give the IUPAC name of $\mathrm{(CH_{3})_{2}C(OH)CH_{2}CH(CH_{3})_{2}}$ and classify it.
- 5 Draw 3-ethylpentan-3-ol and classify it.
- 6 How many structural isomers of $\mathrm{C_{5}H_{12}O}$ are alcohols?
- 7 How many of the alcohols in part 6 are secondary?
- 8 How many lone pairs are there on the oxygen of ethanol? Why is the C–O–H angle in methanol ($108.9^\circ$) less than $109.5^\circ$?
- 1 Give the product of propene with water in the presence of dilute $\mathrm{H_{2}SO_{4}}$.
- 2 Give the product of propene with $\mathrm{(BH_{3})_{2}}$ in THF followed by $\mathrm{H_{2}O_{2}}$/NaOH.
- 3 Give both products for 2-methylpropene (acid-catalysed hydration; hydroboration–oxidation).
- 4 What do $\mathrm{NaBH_{4}}$ and butanone give? What does $\mathrm{LiAlH_{4}}$ give with propanoic acid?
- 5 Give the products (after $\mathrm{H_{3}O^{+}}$) of (a) $\mathrm{CH_{3}MgBr}$ + methanal (b) $\mathrm{C_{2}H_{5}MgBr}$ + ethanal (c) $\mathrm{CH_{3}MgBr}$ + propanone. How many of the three products are 2° alcohols?
- 6 How many moles of $\mathrm{CH_{3}MgBr}$ does 1 mol of ethyl ethanoate consume when it is converted into 2-methylpropan-2-ol?
- 7 Phenylmagnesium bromide reacts with methanal; the product is hydrolysed. Name the alcohol and find its molar mass.
- 8 What mass of ethanol can be obtained by fermentation of $360\ \mathrm{g}$ of glucose ($\mathrm{C_{6}H_{12}O_{6}\rightarrow2C_{2}H_{5}OH+2CO_{2}}$), assuming complete conversion?
- 1 Arrange in order of increasing boiling point: propane, methoxymethane, ethanol, ethane-1,2-diol. What is the position of ethanol (1 = lowest)?
- 2 Explain why butan-1-ol (391 K) boils higher than its isomer 2-methylpropan-2-ol (355 K).
- 3 Arrange water, ethanol, methanol and 2-methylpropan-2-ol in order of decreasing acid strength. What is the position of water (1 = strongest)?
- 4 What volume of hydrogen (in mL, at STP) is evolved when $6.2\ \mathrm{g}$ of ethane-1,2-diol reacts with excess sodium?
- 5 $0.37\ \mathrm{g}$ of a monohydric alcohol gives $56\ \mathrm{mL}$ of hydrogen at STP with excess sodium. Find its molar mass and write its molecular formula.
- 6 Using $\mathrm{p}K_{a}$ values 15.5 and 15.9, how many times larger is $K_{a}$ of methanol than that of ethanol?
- 7 Sodium ethoxide is a stronger base than sodium hydroxide. Explain, and write the equation for its reaction with water.
- 8 Sorbitol is hexane-1,2,3,4,5,6-hexol. How many moles of $\mathrm{H_{2}}$ does 1 mol of sorbitol give with excess sodium?
- 1 Predict the result of the Lucas test at room temperature for butan-1-ol, butan-2-ol and 2-methylpropan-2-ol, and explain the order.
- 2 Give the products of ethanol with (a) $\mathrm{SOCl_{2}}$ (b) $\mathrm{PCl_{5}}$ (c) red P and $\mathrm{I_{2}}$. Which gives the purest chloroethane, and why?
- 3 Butan-2-ol is heated with conc. $\mathrm{H_{2}SO_{4}}$. How many different alkenes (counting cis and trans separately) can form? Which is the major one?
- 4 Give the major and minor alkenes from 2-methylbutan-2-ol with 20% $\mathrm{H_{3}PO_{4}}$ at 358 K.
- 5 Give the major alkene from 2,2-dimethylpropan-1-ol (neopentyl alcohol) heated with conc. $\mathrm{H_{2}SO_{4}}$, and explain.
- 6 Give the products: (a) butan-1-ol + PCC in $\mathrm{CH_{2}Cl_{2}}$ (b) butan-1-ol + $\mathrm{K_{2}Cr_{2}O_{7}/H_{2}SO_{4}}$ (c) propan-2-ol over Cu at 573 K.
- 7 How many moles of $\mathrm{K_{2}Cr_{2}O_{7}}$ (acidified) are needed to oxidise $0.30\ \mathrm{mol}$ of ethanol to ethanoic acid?
- 8 $46\ \mathrm{g}$ of ethanol and $60\ \mathrm{g}$ of ethanoic acid are heated with a little conc. $\mathrm{H_{2}SO_{4}}$ until equilibrium; $K_{c}=4.0$. What mass of ethyl ethanoate ($M=88$) is present?
- 9 (Modelling) A breath-analyser tube oxidises ethanol to ethanal with acidified dichromate (equation in the text). What mass (in mg) of $\mathrm{K_{2}Cr_{2}O_{7}}$ ($M=294$) is reduced by $0.46\ \mathrm{mg}$ of ethanol?
E1. JEE Main · MCQ Which of the following isomers of $\mathrm{C_{4}H_{10}O}$ produces turbidity immediately with a solution of anhydrous $\mathrm{ZnCl_{2}}$ in concentrated HCl at room temperature? (A) butan-1-ol (B) butan-2-ol (C) 2-methylpropan-1-ol (D) 2-methylpropan-2-ol
E2. JEE Main · Numerical How many of the structurally isomeric alcohols of formula $\mathrm{C_{5}H_{12}O}$ give a ketone when oxidised with acidified potassium dichromate? Give the answer to the nearest integer.
E3. JEE Main · MCQ 2,2-Dimethylpropan-1-ol, $\mathrm{(CH_{3})_{3}CCH_{2}OH}$, is heated with concentrated sulphuric acid. The major product is (A) 3-methylbut-1-ene (B) 2-methylbut-1-ene (C) 2-methylbut-2-ene (D) 2,2-dimethylpropene
E4. JEE Main · Numerical $0.92\ \mathrm{g}$ of glycerol (propane-1,2,3-triol) reacts completely with excess sodium metal. Find the volume of hydrogen evolved at STP in mL (molar volume $22.4\ \mathrm{L}$). Give the answer to the nearest integer.
E5. JEE Main · MCQ Propene $\xrightarrow{\text{(i) }(BH_{3})_{2}\text{, THF; (ii) }H_{2}O_{2}/OH^{-}}$ X $\xrightarrow{\text{PCC, }CH_{2}Cl_{2}}$ Y. Y is (A) propanone (B) propanal (C) propanoic acid (D) propan-2-ol
E6. JEE Main · Numerical What volume (in mL) of $0.10\ \mathrm{M}$ acidified $\mathrm{K_{2}Cr_{2}O_{7}}$ is needed to oxidise $0.46\ \mathrm{g}$ of ethanol completely to ethanoic acid? Give the answer to the nearest integer.
Research question. Can the cooling produced by an evaporating liquid be used to rank the strength of the intermolecular forces in a series of alcohols — and does an ether or an alkane of similar molar mass fit the same pattern?
Why it matters. A drop of sanitiser feels cold because evaporation takes the enthalpy of vaporisation from your skin. Fuel engineers blending ethanol into petrol (E10, E20) care about volatility: hydrogen bonding makes ethanol evaporate more slowly than petrol hydrocarbons of similar size, yet ethanol–petrol blends can be more volatile than either, because ethanol's hydrogen-bond network is broken up by the hydrocarbons. Pharmacists choose evaporating solvents for sprays, and climate scientists model the evaporation of water from leaves in the same way.
What to do.
- Wrap a small square of filter paper round the bulb of a thermometer (or a digital temperature probe) and fix it with a thin rubber band.
- Dip it in methanol, ethanol, propan-1-ol or butan-1-ol (each in a stoppered tube, under teacher supervision, no flames anywhere near), lift it out and record the temperature every 10 s for 3 minutes. Dry the paper between liquids.
- Record the largest temperature drop $\Delta T$ for each alcohol. Repeat each one three times.
- If available, repeat with hexane (an alkane) as a comparison — your teacher handles it; do not use ethers in an open room.
- Plot $\Delta T$ against molar mass and against the boiling point, and look for a trend.
Tools: Thermometer or temperature probe with a phone/USB logger, filter paper, rubber bands, small stoppered tubes, a stopwatch, a spreadsheet; gloves and goggles.
Hand in: A table of $\Delta T$ values with their spread, the two graphs, and a paragraph explaining the trend using hydrogen bonding, chain length and the rate of evaporation.
Going further. Why does methanol cool the bulb most even though butan-1-ol has the larger enthalpy of vaporisation per mole? (Think about how fast each evaporates and what "per gram" means.) Predict where propan-2-ol, the sanitiser alcohol, will fall, and test it.
🧪 Self-check quiz
Q1. Propene is treated with diborane in THF and then with alkaline hydrogen peroxide. The product is
Q2. The correct order of acid strength in solution is
Q3. Excess ethanol heated with concentrated H₂SO₄ at 413 K gives mainly
Q4. 2-Methylpropan-2-ol vapour is passed over heated copper at 573 K. The product is
Q5. In the acid-catalysed dehydration of an alcohol, the rate-determining step is