2.1 Light, the Photoelectric Effect and Atomic Spectra
Light travels as a wave but is absorbed and emitted in packets of energy $E=h\nu$. That one idea explains why only some colours knock electrons out of a metal, and why hot hydrogen glows at a few sharp wavelengths that one formula — Rydberg's — predicts to six figures.
A sodium street lamp bathes a road in one shade of orange-yellow; a neon sign glows red; a mercury lamp looks bluish-white but, seen through a prism, splits into a handful of sharp coloured lines. In 1868 astronomers watching a solar eclipse saw a yellow line in the light of the Sun's edge that matched no element known on Earth, and named the unknown element helium after the Greek for Sun — twenty-seven years before it was found in a rock. Every element sends out its own fixed set of wavelengths, as personal as a fingerprint, and chemists and astronomers read those fingerprints to find out what a flame, a steel sample or a distant star is made of.
Why should an atom emit only certain wavelengths? The answer took three steps, and they are the subject of this section. First we describe light as an electromagnetic wave, with a wavelength, a frequency and a wavenumber. Then we meet the experiments that a wave cannot explain — the glow of hot bodies and the photoelectric effect — and the explanation by Planck and Einstein: light is absorbed and emitted in packets, photons, of energy $E=h\nu$. Finally we study atomic spectra, above all the line spectrum of hydrogen, whose wavelengths fit a strikingly simple formula. Explaining that formula is the job of Bohr's model in Section 2.2.
Electromagnetic radiation as a wave
Light, radio waves, X-rays and the heat you feel from a fire are all the same kind of thing: an electromagnetic wave, in which an electric field and a magnetic field oscillate at right angles to each other and to the direction in which the wave travels. Maxwell showed in the 1860s that such a wave carries energy, needs no medium, and in a vacuum always travels at the same speed, the speed of light $c=3.0\times10^{8}\ \mathrm{m\,s^{-1}}$. The waves differ only in how rapidly the fields oscillate.
For a wave travelling through space:
- the wavelength $\lambda$ is the distance between two neighbouring crests (or any two neighbouring points in the same phase); units m, nm ($1\ \mathrm{nm}=10^{-9}\ \mathrm{m}$), pm, or ångström ($1\ \text{Å}=10^{-10}\ \mathrm{m}$);
- the frequency $\nu$ is the number of complete waves that pass a fixed point per second; unit hertz, $1\ \mathrm{Hz}=1\ \mathrm{s^{-1}}$;
- the wavenumber $\bar{\nu}$ is the number of wavelengths in unit length, $\bar{\nu}=1/\lambda$; spectroscopists quote it in $\mathrm{cm^{-1}}$;
- the amplitude is the height of a crest; the intensity (brightness) of the radiation depends on the square of the amplitude, not on the frequency.
Since one wavelength passes a point in each oscillation, the speed is wavelength × frequency:
$$c=\nu\lambda,\qquad \bar{\nu}=\frac{1}{\lambda}=\frac{\nu}{c}.$$Frequency and wavenumber are directly proportional to each other and inversely proportional to the wavelength.
When light passes from air into glass or water it slows down and its wavelength shrinks, but its frequency stays the same — the frequency is set by the source, which is why the colour (and, as we shall see, the photon energy) does not change. In this course "wavelength" always means the wavelength in a vacuum (air is close enough).
The electromagnetic spectrum. Arranged in order of wavelength, electromagnetic waves form one continuous family. The human eye responds only to a narrow band, roughly $400\ \mathrm{nm}$ (violet) to $750\ \mathrm{nm}$ (red). Shorter wavelengths, invisible to us, are ultraviolet, X-rays and gamma rays; longer ones are infrared, microwaves and radio waves. The names are labels for convenience — the boundaries between regions are not sharp.
The wave picture explains interference and diffraction — the rainbow colours on a CD, the bright and dark bands behind two narrow slits — so completely that by 1890 it seemed beyond question. It was about to be overturned by experiments in which light hands over its energy to matter.
Light of wavelength $600\ \mathrm{nm}$ in air enters a block of glass, where it travels more slowly. Which quantity is the same inside the glass as in air?
Planck's quantum theory and the photon
Black-body radiation. Heat an iron rod and it glows dull red, then orange, then yellow-white: the hotter the body, the shorter the wavelength at which it radiates most strongly. An ideal "black body" — one that absorbs every wavelength falling on it — gives out a spread of wavelengths that depends only on its temperature. Classical wave theory predicted that such a body should radiate ever more strongly at shorter and shorter wavelengths, without limit (the "ultraviolet catastrophe"). Experiment showed the opposite: the intensity rises to a peak and then falls to zero at short wavelengths.
In 1900 Max Planck found that he could reproduce the measured curves exactly if he made one strange assumption: the oscillating charges in the hot body can gain or lose energy only in whole-number multiples of a smallest packet, and the size of the packet is proportional to the frequency.
- Atoms and molecules emit or absorb radiant energy not continuously but in discrete packets called quanta (singular quantum). A quantum of light is called a photon.
- The energy of one quantum is proportional to the frequency of the radiation: $$E=h\nu=\frac{hc}{\lambda}=hc\,\bar{\nu},$$ where $h=6.626\times10^{-34}\ \mathrm{J\,s}$ is Planck's constant.
- A body can emit or absorb energy only as a whole number of quanta: $E_\text{total}=n\,h\nu$ with $n=1,2,3,\dots$ — never $1.5$ quanta.
Energy is therefore quantised: it changes in steps. The steps are tiny on an everyday scale ($h$ is very small), which is why we never notice them in a cup of tea cooling down.
In 1905 Einstein went further: light does not merely exchange energy in packets; it travels as a stream of photons. A photon has no mass at rest, moves at speed $c$, and carries energy $h\nu$. A brighter beam of the same colour has more photons per second, not bigger photons. So light shows a dual nature: interference and diffraction need the wave description, while emission, absorption and the photoelectric effect need the particle description.
Energy units. Photon energies are tiny in joules, so chemists also use the electronvolt — the energy an electron gains when accelerated through a potential difference of one volt: $1\ \mathrm{eV}=1.602\times10^{-19}\ \mathrm{J}$. With $hc=(6.626\times10^{-34})(3.0\times10^{8})$, i.e. $hc=1.988\times10^{-25}\ \mathrm{J\,m}$, a very handy form is
$$E\,(\text{in eV})\approx\frac{1240}{\lambda\,(\text{in nm})}.$$For chemistry it is also useful to know the energy carried by one mole of photons, $N_{A}h\nu$ (sometimes called one einstein), which can be compared directly with bond enthalpies in $\mathrm{kJ\,mol^{-1}}$.
Two lamps each give out $10\ \mathrm{W}$ of light: one red ($700\ \mathrm{nm}$), one violet ($400\ \mathrm{nm}$). Which statement is correct?
The photoelectric effect
In 1887 Heinrich Hertz noticed that a spark jumped more easily when ultraviolet light shone on the metal electrodes. Careful experiments in the next twenty years (by Hallwachs, Lenard and finally Millikan) showed what was happening: light falling on a clean metal surface can knock electrons out of it. This is the photoelectric effect, and the ejected electrons are called photoelectrons. In the apparatus a metal plate (the emitter) and a collector sit in an evacuated tube; light falls on the emitter, and a sensitive meter records the current of photoelectrons reaching the collector. Making the collector negative repels the electrons; the smallest negative voltage that stops even the fastest of them is the stopping potential $V_{0}$, and it measures their maximum kinetic energy: $eV_{0}=K_{\max}$.
What the experiments show.
- For each metal there is a threshold frequency $\nu_{0}$. Light of lower frequency ejects no electrons, however intense it is and however long it shines.
- Above the threshold, electrons come out instantly (within about $10^{-9}\ \mathrm{s}$), even in very faint light.
- The maximum kinetic energy of the photoelectrons increases linearly with the frequency of the light and does not depend on its intensity.
- The number of electrons ejected per second (the photocurrent) is proportional to the intensity of the light.
Why the wave picture fails. In a wave, energy is spread smoothly over the wavefront and grows with the amplitude. A bright enough beam of any colour should therefore eject electrons, brighter light should give faster electrons, and in faint light an electron should need time to soak up enough energy. All three predictions are wrong.
Einstein's explanation (1905). Each photon gives all its energy $h\nu$ to one electron, in a single event. Part of that energy is used to pull the electron out of the metal; the rest appears as kinetic energy. If $h\nu$ is too small, the electron cannot escape — no matter how many photons arrive, since each one acts alone. A brighter beam means more photons, hence more electrons, but each electron still receives just one photon's worth.
The work function $W_{0}$ (also written $\phi$) of a metal is the minimum energy needed to remove an electron from its surface. The threshold frequency $\nu_{0}$ is the smallest frequency of light that can eject electrons, and the threshold wavelength $\lambda_{0}$ is the largest wavelength that can; they are linked by
$$W_{0}=h\nu_{0}=\frac{hc}{\lambda_{0}}.$$Photoemission happens only if $\nu\ge\nu_{0}$, i.e. only if $\lambda\le\lambda_{0}$. Metals with loosely held outer electrons (the alkali metals: caesium about $2.1\ \mathrm{eV}$, sodium about $2.3\ \mathrm{eV}$) respond to visible light; most others (zinc about $4.3\ \mathrm{eV}$, platinum about $5.6\ \mathrm{eV}$) need ultraviolet.
When light of frequency $\nu\ge\nu_{0}$ falls on a metal of work function $W_{0}$, the maximum kinetic energy of the ejected electrons is
$$K_{\max}=\tfrac12m_{e}v_{\max}^{2}=h\nu-W_{0}=h(\nu-\nu_{0}),$$ $$eV_{0}=K_{\max}.$$Electrons from deeper inside the metal lose some energy on the way out, so the photoelectrons have a spread of energies from zero up to $K_{\max}$. The equation holds for each photon–electron event; the number of events per second is set by the intensity.
The graph. A plot of $K_{\max}$ (or $eV_{0}$) against $\nu$ is a straight line of slope $h$ — the same for every metal — that cuts the frequency axis at $\nu_{0}$ and, extended backwards, cuts the energy axis at $-W_{0}$. Millikan's measurements of this slope (1916) gave a value of $h$ agreeing with Planck's.
In the photoelectric lab choose sodium ($W_{0}=2.3\ \mathrm{eV}$) and $\lambda=400\ \mathrm{nm}$ at intensity 1; the maximum kinetic energy reads $0.80\ \mathrm{eV}$. Now raise the intensity to 5. What happens to $K_{\max}$?
Light of frequency $\nu$ (above the threshold) ejects photoelectrons with maximum kinetic energy $K$. If the frequency is doubled to $2\nu$, the maximum kinetic energy becomes
Atomic spectra and the hydrogen spectrum
A spectrum is the pattern obtained when radiation is spread out by wavelength with a prism or a diffraction grating. White light from a hot solid gives a continuous spectrum — a rainbow in which every wavelength is present and one colour merges into the next. Hot gases of atoms behave quite differently.
An emission spectrum is the spectrum of the radiation given out by a substance that has been given extra energy (by heating, an electric discharge or a flame). An absorption spectrum is the spectrum of continuous (white) light after it has passed through the substance: it shows dark lines or bands at the wavelengths the substance absorbs.
Free atoms (a gas or vapour at low pressure) give line spectra: only a few sharp wavelengths, separated by dark gaps. An element absorbs exactly the wavelengths it emits, so its absorption lines and emission lines coincide. Each element has its own unique set of lines, and lines are used to identify elements — atomic spectroscopy. Rubidium and caesium (1860–61) and helium (1868) were discovered this way.
The two kinds of spectrum are the negative and positive of one photograph: an emission spectrum is bright lines on a dark background; an absorption spectrum is dark lines on a bright rainbow. The dark Fraunhofer lines in sunlight are the absorption spectrum of the cooler gases in the Sun's outer layers, and they tell us the Sun contains hydrogen, sodium, iron, calcium and dozens of other elements.
The spectrum of hydrogen. Hydrogen, the simplest atom, has the simplest spectrum. When an electric discharge is passed through hydrogen gas at low pressure, the $\mathrm{H_{2}}$ molecules break into atoms and the excited atoms glow pink. In the visible region there are four lines, at $656$ (red), $486$ (blue-green), $434$ (blue) and $410\ \mathrm{nm}$ (violet), getting closer together towards the violet end. In 1885 the Swiss schoolteacher Johann Balmer noticed that their wavelengths fit a formula with whole numbers; Johannes Rydberg put it in the general form that covers every hydrogen line found since, in the ultraviolet and the infrared as well.
Every line in the spectrum of the hydrogen atom has a wavenumber
$$\bar{\nu}=\frac{1}{\lambda}=R_{H}\left(\frac{1}{n_{1}^{2}}-\frac{1}{n_{2}^{2}}\right),$$where $n_{1}$ and $n_{2}$ are positive integers with $n_{2}\gt n_{1}$, and $R_{H}$ is the Rydberg constant:
$$R_{H}=109\,677\ \mathrm{cm^{-1}}=1.097\times10^{7}\ \mathrm{m^{-1}}.$$Lines with the same $n_{1}$ form a series; $n_{2}$ runs over $n_{1}+1,\ n_{1}+2,\dots$. The first line ($n_{2}=n_{1}+1$) has the smallest wavenumber, i.e. the longest wavelength; as $n_{2}\to\infty$ the lines crowd together towards the series limit, $\bar{\nu}=R_{H}/n_{1}^{2}$, which is the shortest wavelength of the series.
The formula was found from measurements (it is empirical). Its explanation — what $n_{1}$ and $n_{2}$ mean — is Bohr's model, Section 2.2.
| Series | $n_{1}$ | $n_{2}$ | Region | Longest λ (first line) | Shortest λ (limit) |
|---|---|---|---|---|---|
| Lyman | 1 | 2, 3, 4, … | ultraviolet | 121.6 nm | 91.2 nm |
| Balmer | 2 | 3, 4, 5, … | visible (and near UV) | 656.5 nm | 364.7 nm |
| Paschen | 3 | 4, 5, 6, … | infrared | 1876 nm | 821 nm |
| Brackett | 4 | 5, 6, 7, … | infrared | 4052 nm | 1459 nm |
| Pfund | 5 | 6, 7, 8, … | infrared | 7460 nm | 2279 nm |
(Wavelengths from $R_{H}=109\,677\ \mathrm{cm^{-1}}$; measured values in air are about $0.03\%$ smaller, which is why you may see $656.3\ \mathrm{nm}$ quoted for the red line.) Only the Balmer series lies largely in the visible region, which is why it was found first. Notice that the series start to overlap from Brackett onwards: the shortest Brackett line ($1459\ \mathrm{nm}$) is shorter than the longest Paschen line ($1876\ \mathrm{nm}$).
- Identify the series from $n_{1}$ (Lyman 1, Balmer 2, Paschen 3, Brackett 4, Pfund 5) — or, for an unknown line, from its region: below $122\ \mathrm{nm}$ only Lyman; $365$–$656\ \mathrm{nm}$ Balmer; $821$–$1876\ \mathrm{nm}$ Paschen.
- First line or limit? "Longest wavelength", "lowest energy" or "first line" means $n_{2}=n_{1}+1$; "shortest wavelength", "highest energy" or "series limit" means $n_{2}=\infty$, i.e. $1/n_{2}^{2}=0$.
- Compute $\bar{\nu}$ in $\mathrm{cm^{-1}}$ with $R_{H}=109\,677\ \mathrm{cm^{-1}}$, then $\lambda=1/\bar{\nu}$ (in cm; multiply by $10^{7}$ for nm).
- Ratios: $R_{H}$ cancels. Work with the brackets $\left(\tfrac{1}{n_{1}^{2}}-\tfrac{1}{n_{2}^{2}}\right)$ only — fast and safe.
In the hydrogen-spectrum explorer choose the Balmer series and move the slider from $n_{2}=3$ up to $n_{2}=10$. Where do the lines crowd together?
1. Intensity versus frequency. Brighter light gives more photoelectrons, never faster ones; and light below the threshold frequency ejects nothing however bright it is. $K_{\max}$ and $V_{0}$ depend only on $\nu$ and the metal.
2. $K_{\max}$ is linear in $\nu$, not proportional to it. Doubling $\nu$ more than doubles $K_{\max}$ ($K'=2K+W_{0}$). With wavelengths, $K_{\max}=hc\left(\tfrac{1}{\lambda}-\tfrac{1}{\lambda_{0}}\right)$ — subtract the reciprocals, not the wavelengths.
3. Units. Put $\lambda$ in metres in $E=hc/\lambda$; put $\lambda$ in cm when using $R_{H}=109\,677\ \mathrm{cm^{-1}}$ (or use $1.097\times10^{7}\ \mathrm{m^{-1}}$). Convert eV to J with $1.602\times10^{-19}$ before using $\tfrac12mv^{2}$ in SI units. Per photon and per mole differ by $N_{A}$.
4. Longest and shortest lines of a series. The longest wavelength is the first line, $n_{2}=n_{1}+1$; the shortest is the series limit, $n_{2}=\infty$. Candidates often swap them because the limit "comes last".
5. Threshold inequalities. Emission needs $\nu\ge\nu_{0}$ but $\lambda\le\lambda_{0}$ — the inequality flips when you change from frequency to wavelength.
Which of these hydrogen lines has the highest wavenumber?
Exercises
Use $h=6.626\times10^{-34}\ \mathrm{J\,s}$, $c=3.0\times10^{8}\ \mathrm{m\,s^{-1}}$, $1\ \mathrm{eV}=1.602\times10^{-19}\ \mathrm{J}$, $m_{e}=9.11\times10^{-31}\ \mathrm{kg}$, $N_{A}=6.022\times10^{23}\ \mathrm{mol^{-1}}$ and $R_{H}=109\,677\ \mathrm{cm^{-1}}$ unless a part says otherwise.
- 1 An FM radio station broadcasts at $98.3\ \mathrm{MHz}$. Find the wavelength.
- 2 Find the wavenumber, in $\mathrm{cm^{-1}}$, of blue light of wavelength $450\ \mathrm{nm}$.
- 3 An infrared absorption occurs at $2000\ \mathrm{cm^{-1}}$. Find its frequency and wavelength.
- 4 Copper X-rays used in crystallography have $\lambda=0.154\ \mathrm{nm}$. Find the energy of one photon in joules and in keV.
- 5 Find the energy of one mole of photons of wavelength $400\ \mathrm{nm}$, in $\mathrm{kJ\,mol^{-1}}$.
- 6 A $60\ \mathrm{W}$ lamp converts $5.0\%$ of its power into visible light of average wavelength $550\ \mathrm{nm}$. How many visible photons does it emit per second?
- 7 How many photons of wavelength $500\ \mathrm{nm}$ carry a total energy of $1.0\ \mathrm{J}$?
- 8 The $\mathrm{Cl{-}Cl}$ bond enthalpy is $242\ \mathrm{kJ\,mol^{-1}}$. Find the longest wavelength of light that can break this bond, one photon per molecule.
- 1 Zinc has a work function of $4.3\ \mathrm{eV}$. Find its threshold frequency and threshold wavelength.
- 2 Light of wavelength $200\ \mathrm{nm}$ falls on zinc. Find the maximum kinetic energy of the photoelectrons in eV.
- 3 Find the stopping potential in part 2.
- 4 The threshold wavelength of a metal is $600\ \mathrm{nm}$. Light of $400\ \mathrm{nm}$ falls on it. Find $K_{\max}$ in eV.
- 5 Find the maximum speed of the photoelectrons in part 4.
- 6 In part 4 the intensity of the light is tripled. What happens to $K_{\max}$ and to the photocurrent? Explain using photons.
- 7 Light of frequency $1.2\times10^{15}\ \mathrm{Hz}$ ejects electrons with a maximum kinetic energy of $1.5\ \mathrm{eV}$ from a metal. Find the work function in eV.
- 8 For the metal of part 7, what frequency of light would give $K_{\max}=3.0\ \mathrm{eV}$?
- 1 Find the wavenumber and wavelength of the first line of the Lyman series.
- 2 Find the wavelength of the Lyman series limit.
- 3 Find the wavelength of the second line of the Balmer series ($n_{2}=4$). What colour is it?
- 4 Find the shortest wavelength in the Paschen series.
- 5 A hydrogen line is observed at $102.6\ \mathrm{nm}$. Identify $n_{1}$ and $n_{2}$.
- 6 Find the photon energy, in eV, of the first line of the Paschen series.
- 7 Find the ratio of the longest wavelength of the Lyman series to the longest wavelength of the Paschen series.
- 8 White light is passed through cool sodium vapour and then through a prism. Describe what is seen, and explain why the dark lines appear at exactly the wavelengths of the bright lines of a sodium flame.
- 1 Light from a hydrogen lamp falls on caesium ($W_{0}=2.1\ \mathrm{eV}$). Does the red Balmer line ($656.5\ \mathrm{nm}$) eject electrons? Does the blue-green line ($486.3\ \mathrm{nm}$)? Find $K_{\max}$ where it does.
- 2 The first Lyman line of hydrogen ($121.6\ \mathrm{nm}$) falls on platinum ($W_{0}=5.6\ \mathrm{eV}$). Find $K_{\max}$ in eV.
- 3 Light of $250\ \mathrm{nm}$ falls on two metals with work functions $2.0\ \mathrm{eV}$ and $4.0\ \mathrm{eV}$. Find the ratio of the maximum speeds of their photoelectrons.
- 4 (Modelling) A $100\ \mathrm{W}$ sodium street lamp turns $30\%$ of its power into $589\ \mathrm{nm}$ light. How many photons does it emit per second?
- 5 When a metal is lit with light of wavelength $300\ \mathrm{nm}$ the stopping potential is $V$; with $600\ \mathrm{nm}$ it is $V/4$. Find the threshold wavelength of the metal.
- 6 (Modelling) A dark-adapted human eye can just detect a flash in which $2.5\times10^{-17}\ \mathrm{J}$ of $500\ \mathrm{nm}$ light reaches the retina. How many photons is that?
- 7 Show from the Rydberg formula that the wavenumber of the line $3\to1$ equals the sum of the wavenumbers of the lines $2\to1$ and $3\to2$, and use it to find the wavelength of the $3\to1$ line.
- 8 Find the wavelength of the first line of the Brackett series and name the region of the spectrum.
E1. JEE Main · MCQ Graphs of the maximum kinetic energy of photoelectrons against the frequency of the incident light are drawn for two metals A and B, with $W_{A}\lt W_{B}$. Which statement is correct? (A) The line for B is steeper. (B) The lines meet on the frequency axis. (C) The lines are parallel, and B's line cuts the frequency axis at the larger frequency. (D) The slope of each line equals its work function.
E2. JEE Main · Numerical Ultraviolet light of wavelength $248\ \mathrm{nm}$ falls on a metal of work function $2.0\ \mathrm{eV}$. The maximum speed of the photoelectrons is $x\times10^{5}\ \mathrm{m\,s^{-1}}$. Find $x$. Take $hc=1240\ \mathrm{eV\,nm}$, $m_{e}=9.11\times10^{-31}\ \mathrm{kg}$, $1\ \mathrm{eV}=1.602\times10^{-19}\ \mathrm{J}$. Give the answer to the nearest integer.
E3. JEE Main · MCQ The ratio of the longest wavelength of the Balmer series to the shortest wavelength of the Balmer series of hydrogen is (A) $\tfrac95$ (B) $\tfrac54$ (C) $\tfrac43$ (D) $\tfrac{36}{5}$
E4. JEE Main · Numerical Find the energy, in $\mathrm{kJ\,mol^{-1}}$, of one mole of photons of wavelength $300\ \mathrm{nm}$. Take $h=6.626\times10^{-34}\ \mathrm{J\,s}$, $c=3.0\times10^{8}\ \mathrm{m\,s^{-1}}$ and $N_{A}=6.022\times10^{23}\ \mathrm{mol^{-1}}$. Give the answer to the nearest integer.
E5. JEE Main · MCQ Which statement about the photoelectric effect is incorrect? (A) Below the threshold frequency no electrons are emitted, whatever the intensity. (B) The photocurrent is proportional to the intensity of the light above the threshold. (C) Emission begins with no measurable time lag. (D) The stopping potential increases when the intensity of light of a fixed frequency is increased.
E6. JEE Main · Numerical How many lines of the Balmer series of hydrogen have wavelengths greater than $400\ \mathrm{nm}$? Use $R_{H}=109\,677\ \mathrm{cm^{-1}}$. Give the answer as an integer.
Research question. Can a home-made spectroscope, built from a piece of an old CD or DVD and a phone camera, measure the wavelengths of the lines in a street lamp or a compact fluorescent lamp well enough to identify the element that produces them?
Why it matters. Atomic emission spectroscopy is how steel works check alloy compositions in seconds, how environmental labs measure lead or arsenic in drinking water (in a hot argon plasma), how forensic scientists match glass fragments, and how astronomers learn what stars and exoplanet atmospheres contain. Low-cost spectrometers built from phones are now used in schools and in field testing in many countries. The physics is the same in all of them: a grating spreads the light, and each element's lines sit at fixed wavelengths.
What to do.
- Cut a square from a CD or DVD (the DVD's tracks are about $740\ \mathrm{nm}$ apart, a CD's about $1600\ \mathrm{nm}$) and peel off the label layer, so it acts as a transmission grating. Fix it at one end of a cardboard tube with a narrow slit at the other end.
- Calibrate: look at a light of known lines. A compact fluorescent lamp shows the mercury lines at $436$ (blue), $546$ (green) and $578\ \mathrm{nm}$ (yellow pair). Photograph the spectrum with the phone held at the grating.
- On the photograph, measure the position (in pixels) of each calibration line and fit a straight line of wavelength against position.
- Photograph the spectra of other sources: a sodium street lamp, a neon indicator lamp, a white LED, sunlight (look for dark lines), and a flame coloured by a pinch of table salt.
- Use your calibration to find the wavelengths of the lines and compare them with values from a published atomic-line database.
Tools: An old CD or DVD, cardboard, black tape, a phone camera, free image software that shows pixel positions (or a free spectrometer app), a spreadsheet.
Hand in: Photographs of your spectroscope and of four spectra; the calibration graph; a table of measured and accepted wavelengths with percentage errors; a paragraph on which sources gave line spectra and which gave continuous spectra, and why.
Going further. If your school has a hydrogen discharge tube, measure the four visible Balmer lines and use the Rydberg formula to find your own value of $R_{H}$ from a graph of $1/\lambda$ against $1/n_{2}^{2}$ (the slope is $-R_{H}$ and the intercept is $R_{H}/4$).
🧪 Self-check quiz
Q1. Arrange the photons of these radiations in order of increasing energy: X-rays, microwaves, visible light, ultraviolet.
Q2. The threshold wavelength of a metal is $500\ \mathrm{nm}$. Its work function is closest to
Q3. A hydrogen line has $n_{1}=3$. In which region of the spectrum does it lie?
Q4. A radiation has wavenumber $2.0\times10^{4}\ \mathrm{cm^{-1}}$. Its wavelength is
Q5. Light above the threshold frequency falls on a metal. If its intensity is doubled at the same frequency,