Chapter 3 · Introduction

Chapter 3 — Chemical Bonding and Molecular Structure

Why atoms stick together, and what shape the result takes. Electron transfer gives ionic crystals, whose energy the Born–Haber cycle measures; electron sharing gives molecules whose polarity, shape and hybridisation follow from counting electron pairs; and molecular orbitals explain bond order and magnetism, alongside metallic and hydrogen bonds.

Common salt melts only at $801\ ^{\circ}\mathrm{C}$; methane, with a smaller molar mass than water, boils at $-161\ ^{\circ}\mathrm{C}$; water itself boils at $100\ ^{\circ}\mathrm{C}$, while hydrogen sulphide — almost twice as heavy — is a gas at room temperature. Ice floats on water, carbon dioxide is a straight molecule with no dipole while water is bent and strongly polar, and a stream of water bends towards a charged comb while a stream of carbon tetrachloride does not. A medicine works only if its molecule has the right shape to fit a protein. None of these facts is about the atoms themselves; all of them are about how atoms are bonded — by what kind of bond, how strongly, and in what geometry.

This chapter answers those questions in four steps. It begins with the octet rule of Kossel and Lewis and with ionic bonds, where electrons move from one atom to another and a crystal lattice locks the ions together; the Born–Haber cycle measures the lattice enthalpy that pays for it. Next comes the covalent bond: Lewis structures and formal charge, electronegativity and Fajans' rules for how unevenly electrons are shared, the dipole moment that measures it, and VSEPR theory, which turns a count of electron pairs into the shape of a molecule. Valence bond theory then explains bonds as overlapping orbitals — σ and π bonds, hybridisation from $sp$ to $sp^{3}d^{2}$, and resonance. Finally molecular orbital theory predicts bond order, bond length and the magnetism of $\mathrm{O_{2}}$, and the chapter closes with metallic bonding and the hydrogen bond. Shapes, hybridisation, dipole moments and bond orders appear in almost every JEE Main chemistry paper, and every later unit — the p-block, coordination compounds and all of organic chemistry — is written in this language.

Octet rule→Ionic bond→Born–Haber cycle→Covalent bond, formal charge→Fajans' rules, $\mu=q\times d$→VSEPR shapes→σ and π overlap→Hybridisation→Resonance→MO theory, bond order→Metallic and hydrogen bonds
🎯 By the end of this chapter you can…
  • apply the octet rule and recognise its exceptions, and draw Lewis structures with formal charges $\text{FC}=V-L-\tfrac12B$;
  • state the conditions that favour ionic bonding, use a Born–Haber cycle to find a lattice enthalpy, electron gain enthalpy or enthalpy of formation, and compare lattice enthalpies through $\dfrac{z_{+}z_{-}}{r_{+}+r_{-}}$;
  • rank bonds by covalent character with Fajans' rules, and use dipole moments (as vector sums of bond moments) to decide molecular polarity and percentage ionic character;
  • predict the shape of a molecule or ion and the trend of its bond angles with VSEPR theory;
  • count σ and π bonds, and find the hybridisation ($sp$, $sp^{2}$, $sp^{3}$, $sp^{3}d$, $sp^{3}d^{2}$) of a central atom from its steric number $H=\tfrac12(V+M-c+a)$;
  • write resonance structures and find the average bond order and charge distribution of the hybrid;
  • write MO configurations of $\mathrm{H_{2}}$ to $\mathrm{Ne_{2}}$ and their ions (with the correct energy order), and deduce bond order, bond length, bond enthalpy and magnetic behaviour;
  • explain metallic bonding with the electron-sea model and the effects of inter- and intramolecular hydrogen bonds on boiling points, solubility and structure;
  • solve JEE Main MCQ and numerical-answer problems on chemical bonding.

Sulphur tetrafluoride, $\mathrm{SF_{4}}$, has five electron pairs round sulphur. What is the shape of the molecule, and is it polar?

Choose $\mathrm{SF_{4}}$. The count reads $H=\tfrac12(6+4-0+0)=5$: the readouts show steric number 5 → $sp^{3}d$, 4 bond pairs + 1 lone pair, and shape see-saw. In a trigonal bipyramid the lone pair takes an equatorial position, where it meets only two pairs at $90^{\circ}$ (Sections 3.2 and 3.3). The four S–F bond moments do not cancel, so the net dipole reads non-zero (polar). Now try $\mathrm{XeF_{4}}$: steric number $6$, two lone pairs opposite each other, square planar and non-polar — four bonds, like $\mathrm{SF_{4}}$, but a different shape.
Teaser — From Formula to Shape

Pick a molecule or ion with one central atom. The lab counts the electron pairs round the central atom with $H=\tfrac12(V+M-c+a)$ ($V$ valence electrons of the central atom, $M$ monovalent atoms attached, $c$ positive and $a$ negative charge), places bond pairs and lone pairs (purple lobes) as far apart as possible, and names the hybridisation and the shape. Press Play to turn the model.

steric number → hybridisation—
bond pairs + lone pairs—
shape—
net dipole—

Sections in this chapter

🎯 Chapter mixed test JEE Main · MCQJEE Main · Numerical

Eight problems drawn from all four sections and shuffled, as in the real paper; several need two sections at once. Answer each one and press Submit (NTA marking: $+4$ correct, $-1$ wrong, $0$ unanswered), or press ⏱ Take as a timed test for the real-exam experience: $8$ questions at the JEE Main pace of $2.4$ minutes each, with the NTA question palette. For any shape question, count the electron pairs first.

E1. JEE Main · MCQ Which molecule is planar and has zero dipole moment? (A) $\mathrm{NF_{3}}$ (B) $\mathrm{BCl_{3}}$ (C) $\mathrm{SF_{4}}$ (D) $\mathrm{ClF_{3}}$

Shapes (Rule 3.13) $\mathrm{NF_{3}}$: $H=4$, one lone pair, trigonal pyramidal. $\mathrm{BCl_{3}}$: $H=3$, no lone pair, trigonal planar. $\mathrm{SF_{4}}$: $H=5$, one lone pair, see-saw. $\mathrm{ClF_{3}}$: $H=5$, two lone pairs, T-shaped.
Polarity Only the symmetric trigonal planar $\mathrm{BCl_{3}}$ has its three bond moments cancel (Result 3.6). $\mathrm{ClF_{3}}$ is planar too, but its T shape leaves a net dipole.
Answer (B).

E2. JEE Main · Numerical For lithium fluoride (all values in $\mathrm{kJ\,mol^{-1}}$): enthalpy of sublimation of Li $+161$, ionisation enthalpy of Li $+520$, bond dissociation enthalpy of $\mathrm{F_{2}}$ $+158$, electron gain enthalpy of F $-328$, lattice enthalpy of LiF $+1037$. Find the magnitude of the standard enthalpy of formation of $\mathrm{LiF(s)}$, in $\mathrm{kJ\,mol^{-1}}$. Give the answer to the nearest integer.

Cycle For $\mathrm{Li(s)+\tfrac12F_{2}(g)\rightarrow LiF(s)}$ (Principle 3.3): $\Delta_{f}H^{\circ}=\Delta_\text{sub}H+\Delta_{i}H+\tfrac12\Delta_\text{bond}H+\Delta_{eg}H-\Delta_\text{lattice}H$.
Numbers $\Delta_{f}H^{\circ}=161+520+79-328-1037=-605\ \mathrm{kJ\,mol^{-1}}$.
Answer $605$.
⏱ Shortcut One mole of LiF needs only one F atom: half the $\mathrm{F{-}F}$ bond enthalpy. Using all $158$ gives $526$; adding the lattice enthalpy instead of subtracting gives a positive, absurd value.

E3. JEE Main · MCQ Which species has the highest bond order and is also paramagnetic? (A) $\mathrm{N_{2}}$ (B) $\mathrm{C_{2}}$ (C) $\mathrm{O_{2}}$ (D) $\mathrm{O_{2}^{+}}$

MO configurations (Rule 3.17) $\mathrm{N_{2}}$ ($14$ e): B.O. $3$, all electrons paired. $\mathrm{C_{2}}$ ($12$ e, $\pi2p$ below $\sigma2p_{z}$): $\pi2p^{4}$, B.O. $2$, diamagnetic. $\mathrm{O_{2}}$ ($16$ e): $\pi^{*}2p^{2}$, B.O. $2$, two unpaired. $\mathrm{O_{2}^{+}}$ ($15$ e): $\pi^{*}2p^{1}$, B.O. $2.5$, one unpaired.
Both conditions $\mathrm{N_{2}}$ has the highest bond order but is diamagnetic; of the paramagnetic species $\mathrm{O_{2}^{+}}$ has the highest (Definition 3.15).
Answer (D).
⏱ Shortcut Removing an electron from $\mathrm{O_{2}}$ takes it from an antibonding $\pi^{*}$ orbital, so the bond order rises to $2.5$ and one electron stays unpaired.

E4. JEE Main · Numerical In but-1-en-3-yne, $\mathrm{CH_{2}{=}CH{-}C{\equiv}CH}$, let $x$ be the number of σ bonds and $y$ the number of π bonds. Find $x+2y$. Give the answer to the nearest integer.

σ bonds Every bond between two atoms contains exactly one σ bond (Rule 3.11): $4$ C–H and $3$ C–C, so $x=7$.
π bonds The double bond has one π, the triple bond two: $y=3$. (The two $\mathrm{CH_{2}{=}CH}$ carbons are $sp^{2}$, the two alkyne carbons $sp$.)
Answer $x+2y=7+6=13$.
⏱ Shortcut σ bonds $=$ (number of atoms $-1$) for any open-chain molecule: $8-1=7$.

E5. JEE Main · MCQ Which statement is correct? (A) The lattice enthalpy of $\mathrm{MgO}$ is about four times that of $\mathrm{NaF}$, mainly because both ionic charges are doubled. (B) $\mathrm{LiI}$ is less covalent than $\mathrm{LiF}$. (C) $\mathrm{AlCl_{3}}$ is less covalent than $\mathrm{NaCl}$. (D) $\mathrm{KCl}$ has a larger lattice enthalpy than $\mathrm{NaCl}$.

Lattice enthalpy $\Delta_\text{lattice}H\propto\dfrac{z_{+}z_{-}}{r_{+}+r_{-}}$ (Result 3.4). $\mathrm{NaF}$ and $\mathrm{MgO}$ have similar ion sizes, and $z_{+}z_{-}$ goes from $1$ to $4$: $932$ against $3845\ \mathrm{kJ\,mol^{-1}}$. So (A) is right, and (D) is wrong — the larger $\mathrm{K^{+}}$ gives the smaller value.
Fajans' rules (Rule 3.5) A large anion is more polarisable, so $\mathrm{LiI}$ is more covalent than $\mathrm{LiF}$; a small, highly charged cation polarises more, so $\mathrm{AlCl_{3}}$ is more covalent than $\mathrm{NaCl}$. (B) and (C) are reversed.
Answer (A).

E6. JEE Main · Numerical Find the total number of lone pairs of electrons on all the atoms of a $\mathrm{XeF_{4}}$ molecule. Give the answer to the nearest integer.

Central atom Xe has $8$ valence electrons and uses $4$ in the four Xe–F bonds: $2$ lone pairs (square planar, Section 3.2).
Fluorine atoms Each F has $7$ valence electrons, uses $1$ in its bond and keeps $3$ lone pairs: $4\times3=12$.
Answer $2+12=14$.
⏱ Shortcut Check by electron count: $36$ valence electrons $=4$ bond pairs $+\ 14$ lone pairs ($8+28=36$). Counting only the central atom gives $2$.

E7. JEE Main · MCQ Which hydride has the highest boiling point? (A) $\mathrm{HF}$ (B) $\mathrm{NH_{3}}$ (C) $\mathrm{H_{2}O}$ (D) $\mathrm{H_{2}S}$

Hydrogen bonding $\mathrm{H_{2}S}$ forms no significant hydrogen bonds (S is too large and not electronegative enough), so it boils lowest. $\mathrm{HF}$, $\mathrm{H_{2}O}$ and $\mathrm{NH_{3}}$ are all hydrogen-bonded (Rule 3.19).
Number of hydrogen bonds The H–F bond is the most polar, but each HF molecule has one H to give, so on average it forms only about two hydrogen bonds (chains). Each water molecule has two H atoms and two lone pairs and can form four — a three-dimensional network. Water boils at $100\ ^{\circ}\mathrm{C}$, HF at about $20\ ^{\circ}\mathrm{C}$, $\mathrm{NH_{3}}$ at $-33\ ^{\circ}\mathrm{C}$.
Answer (C).
⏱ Shortcut The strongest single hydrogen bond (HF) is not the same as the highest boiling point: count the bonds per molecule.

E8. JEE Main · Numerical How many of the following have a bond order of $1.5$ for the bond named? $\mathrm{O_{2}^{-}}$ (O–O), $\mathrm{NO_{2}^{-}}$ (N–O), $\mathrm{O_{3}}$ (O–O), $\mathrm{CO_{3}^{2-}}$ (C–O), benzene (C–C), $\mathrm{N_{2}^{+}}$ (N–N), $\mathrm{NO_{3}^{-}}$ (N–O), $\mathrm{F_{2}^{+}}$ (F–F). Give the answer to the nearest integer.

Resonance (Section 3.3) Average bond order $=\dfrac{\text{total bonds shared}}{\text{number of equivalent links}}$: $\mathrm{NO_{2}^{-}}$ $\tfrac32$, $\mathrm{O_{3}}$ $\tfrac32$, benzene $\tfrac32$; but $\mathrm{CO_{3}^{2-}}$ and $\mathrm{NO_{3}^{-}}$ are $\tfrac43\approx1.33$.
MO theory (Section 3.4) $\mathrm{O_{2}^{-}}$ ($17$ e): $\tfrac12(10-7)=1.5$; $\mathrm{F_{2}^{+}}$ ($17$ e): $\tfrac12(10-7)=1.5$; $\mathrm{N_{2}^{+}}$ ($13$ e): $\tfrac12(9-4)=2.5$.
Answer $\mathrm{O_{2}^{-}}$, $\mathrm{NO_{2}^{-}}$, $\mathrm{O_{3}}$, benzene and $\mathrm{F_{2}^{+}}$: $5$.
⏱ Shortcut $\mathrm{O_{2}^{-}}$ and $\mathrm{F_{2}^{+}}$ are isoelectronic ($17$ electrons), so they must have the same bond order.
✅ Before you start
Bonding is built on the electronic configurations of atoms and ions — the valence electrons, the Aufbau, Pauli and Hund rules and the count of unpaired electrons (Section 2.4). Valence bond and MO theory use the shapes of s, p and d orbitals and the signs (phases) of their lobes (Section 2.4, Section 2.3). The Born–Haber cycle uses ionisation enthalpy and electron gain enthalpy, which Section 3.1 defines where it needs them (their periodic trends follow in Section 9.2). From physics and mathematics: Coulomb's law (attraction grows with the charges and falls with distance), adding two vectors at an angle, $\mu_\text{R}=\sqrt{\mu_{1}^{2}+\mu_{2}^{2}+2\mu_{1}\mu_{2}\cos\theta}$, and simple solid geometry — the tetrahedron, trigonal bipyramid and octahedron.