Chapter 3 · Chemical Bonding and Molecular Structure

3.2 Covalent Bonding, Polarity and VSEPR Theory

When neither atom can take an electron from the other, they share. Lewis structures and formal charges tell you how the electrons are shared, electronegativity and Fajans' rules tell you how unevenly, dipole moments measure the result — and VSEPR theory turns the count of electron pairs into the shape of the molecule.

Water and carbon dioxide are both small molecules made of three atoms, both contain bonds to oxygen, and both are gases or vapours at the temperature of a flame. Yet water dissolves salt, climbs up paper and bends a thin stream towards a charged comb, while carbon dioxide does none of these. The difference is not in the atoms but in the geometry: the water molecule is bent, carbon dioxide is straight, and that single fact decides whether the molecule as a whole has positive and negative ends. Shape and polarity control boiling points, solubility, the way drugs fit enzymes, and why microwave ovens heat food.

Ionic bonding (Section 3.1) needs one atom that gives up electrons cheaply and another that accepts them eagerly. Most pairs of atoms — two chlorine atoms, carbon and hydrogen, nitrogen and oxygen — are too alike for that. They share electrons instead. In this section we learn to draw the shared and unshared electrons as Lewis structures, to judge them with formal charges, to measure the unevenness of sharing with electronegativity and the dipole moment, to see with Fajans' rules how even ionic bonds acquire covalent character, and finally to predict the three-dimensional shapes of molecules with VSEPR theory. Valence bond theory and hybridisation, which explain why these shapes have the bonds they do, follow in Section 3.3.

Covalent bonds, Lewis structures and formal charge

Two chlorine atoms each have seven valence electrons. Neither can pull an electron away from the other, but if each contributes one electron to a shared pair, the pair is attracted by both nuclei and counts towards the octet of both atoms: $\mathrm{Cl{-}Cl}$, each chlorine now surrounded by one shared pair and three unshared pairs. This was Lewis's idea (1916), extended by Langmuir (1919).

📘 Definition 3.4 — Covalent bond, bond pairs and lone pairs

A covalent bond is formed when two atoms share a pair of electrons, each atom usually contributing one electron. Sharing one, two or three pairs gives a single, double or triple bond ($\mathrm{H{-}H}$, $\mathrm{O{=}O}$, $\mathrm{N{\equiv}N}$). The shared pairs are bond pairs; valence electron pairs that belong to one atom only and take no part in bonding are lone pairs (non-bonding pairs).

A Lewis structure shows all the valence electrons of a molecule or ion: each bond pair as a line between the atoms, each lone pair as two dots on its atom.

📘 Definition 3.5 — Coordinate (dative) bond

A coordinate bond is a covalent bond in which both electrons of the shared pair come from the same atom (the donor), which has a lone pair, while the other atom (the acceptor) has a vacant orbital. It is shown by an arrow from donor to acceptor, $\mathrm{H_{3}N\rightarrow BF_{3}}$, or as an ordinary line with formal charges. Once formed, a coordinate bond is identical to any other covalent bond: the four $\mathrm{N{-}H}$ bonds of $\mathrm{NH_{4}^{+}}$, formed from $\mathrm{NH_{3}+H^{+}}$, are indistinguishable.

🧭 Problem-solving strategy — Drawing a Lewis structure
  1. Count the valence electrons of all atoms; add one per negative charge, subtract one per positive charge. ($\mathrm{CO_{3}^{2-}}$: $4+3\times6+2=24$.)
  2. Choose the skeleton: the least electronegative atom (never H or F) is usually central; hydrogen is always terminal; in oxoacids H is attached to O.
  3. Join the atoms by single bonds, then complete the octets of the outer atoms with lone pairs.
  4. Put any electrons left over on the central atom (as lone pairs; a period-3 or later central atom may exceed eight).
  5. If the central atom still lacks an octet, turn lone pairs of outer atoms into double or triple bonds.
  6. Check with formal charges (below) and pick the structure with the smallest formal charges.

A Lewis structure is a book-keeping device, and like any book-keeping it can be done in more than one way. Formal charges tell us which way is most sensible. The idea is to compare the electrons an atom "owns" in the structure with the valence electrons of the free atom, assigning every lone pair entirely to its atom and every bond pair half-and-half.

📘 Definition 3.6 — Formal charge

The formal charge on an atom in a Lewis structure is

$$\text{FC}=V-L-\tfrac12B ,$$

where $V$ is the number of valence electrons of the free atom, $L$ the number of electrons in its lone pairs (non-bonding electrons) and $B$ the number of electrons in the bonds it forms (bonding electrons). The formal charges of all atoms add up to the overall charge of the species.

Among possible Lewis structures of the same species, the most likely one has (i) the smallest formal charges, preferably zero; (ii) any negative formal charge on the more electronegative atom; (iii) no adjacent atoms with formal charges of the same sign. Formal charges are not the real charges on the atoms; they are a guide to the best structure.

✏️ Example 1 — Formal charges in CO, O₃ and NH₄⁺
Draw the Lewis structures of (a) carbon monoxide, (b) ozone and (c) the ammonium ion with an octet on every atom other than hydrogen, and calculate the formal charge of every atom. Check that the formal charges add up to the charge of the species.
Find the formal charge on the central oxygen atom of ozone before you open the solution:
(a) CO $4+6=10$ valence electrons. Only $\mathrm{:C{\equiv}O:}$ gives both atoms an octet (three bond pairs, one lone pair each). C: $4-2-\tfrac12(6)=-1$; O: $6-2-\tfrac12(6)=+1$. Sum $0$ ✓.
(b) O₃ $3\times6=18$ electrons. Skeleton O–O–O; octets need one double bond: $\mathrm{O{=}O{-}O}$ with 2, 1 and 3 lone pairs. Left O: $6-4-\tfrac12(4)=0$; centre: $6-2-\tfrac12(6)=+1$; right O: $6-6-\tfrac12(2)=-1$. Sum $0$ ✓.
(c) NH₄⁺ $5+4-1=8$ electrons: four N–H bonds, no lone pairs. N: $5-0-\tfrac12(8)=+1$; each H: $1-0-\tfrac12(2)=0$. Sum $+1$ ✓, the charge of the ion.
Meaning The formal charges in CO do not mean that carbon is negative in reality: the electronegativity difference pulls the other way, and the two effects nearly cancel — CO has a very small dipole moment ($0.11\ \mathrm{D}$) with, surprisingly, its negative end on carbon.
✏️ Example 2 — Choosing the skeleton: is dinitrogen oxide NNO or NON?
Dinitrogen oxide, $\mathrm{N_{2}O}$ (laughing gas), has 16 valence electrons. Compare by formal charges the octet structures (a) $\mathrm{N{=}N{=}O}$, (b) $\mathrm{N{\equiv}N{-}O}$ and (c) $\mathrm{N{=}O{=}N}$, and decide which atom is central and which structure contributes most.
(a) $\mathrm{\ddot{N}{=}N{=}\ddot{O}}$: terminal N has 2 lone pairs, central N none, O 2 lone pairs. FC: terminal N $5-4-2=-1$; central N $5-0-4=+1$; O $6-4-2=0$.
(b) $\mathrm{:N{\equiv}N{-}O}$ with 1, 0 and 3 lone pairs: terminal N $5-2-3=0$; central N $5-0-4=+1$; O $6-6-1=-1$.
(c) $\mathrm{N{=}O{=}N}$ with 2, 0, 2 lone pairs: each N $5-4-2=-1$; O $6-0-4=+2$. A $+2$ on the most electronegative atom — the worst possible arrangement. So N is central: the atom order is NNO.
Best (a) and (b) both have formal charges $\pm1$. (b) puts the negative charge on oxygen, the more electronegative atom, so it is slightly preferred; the real molecule is between (a) and (b), with an N–N bond between double and triple. (Experiment: N–N $113\ \mathrm{pm}$, between $\mathrm{N{=}N}$ $125$ and $\mathrm{N{\equiv}N}$ $110\ \mathrm{pm}$.)
Rule Formal charges explain the general rule "the least electronegative atom goes in the middle".

In the octet Lewis structure of carbon monoxide, $\mathrm{:C{\equiv}O:}$, the formal charges on C and O are

Electronegativity, polar bonds and Fajans' rules

In $\mathrm{H_{2}}$ or $\mathrm{Cl_{2}}$ the shared pair is shared equally. In HCl it is not: chlorine attracts the pair more strongly, so the electron density is shifted towards Cl. The chlorine end carries a small negative charge $\delta-$ and the hydrogen end an equal positive charge $\delta+$: $\mathrm{\overset{\delta+}{H}{-}\overset{\delta-}{Cl}}$. Such a bond is a polar covalent bond.

📘 Definition 3.7 — Electronegativity; polar and non-polar covalent bonds

The electronegativity $\chi$ of an element is the tendency of its atom, in a molecule, to attract a shared pair of electrons towards itself. It is a relative, dimensionless number — not a measurable energy of an isolated atom like the electron gain enthalpy. On the Pauling scale fluorine, the most electronegative element, has $4.0$.

A covalent bond between identical atoms ($\Delta\chi=0$) is non-polar. A bond between atoms of different electronegativity is polar: the more electronegative atom carries a partial negative charge. The larger $\Delta\chi$, the more polar the bond; for $\Delta\chi$ above about $1.7$ the bond is more than half ionic and is usually described as ionic.

ElementHLiNaKMgAlBCNOFPSClBrI
$\chi$ (Pauling)2.11.00.90.81.21.52.02.53.03.54.02.12.53.02.82.5

Electronegativity increases across a period (rising effective nuclear charge, shrinking radius) and decreases down a group (larger atoms hold shared electrons less tightly). The four most electronegative elements are F, O, N and Cl. Bond polarity therefore follows simple patterns: $\mathrm{H{-}F}\gt\mathrm{H{-}Cl}\gt\mathrm{H{-}Br}\gt\mathrm{H{-}I}$ ($\Delta\chi=1.9,\ 0.9,\ 0.7,\ 0.4$) and $\mathrm{F{-}H}\gt\mathrm{O{-}H}\gt\mathrm{N{-}H}\gt\mathrm{C{-}H}$.

The other side of the coin: covalent character in ionic bonds. Polar covalent bonds are partly ionic; equally, ionic bonds are partly covalent. A cation pulls the electron cloud of a neighbouring anion towards itself and distorts it — it polarises the anion. If the distortion is large, electron density accumulates between the nuclei, which is exactly what a shared pair is. The ability of a cation to distort an anion is its polarising power, which grows with its charge density, roughly measured by the ionic potential $\phi=z/r$. The ease with which the anion is distorted is its polarisability, which grows with its size and charge, because the outer electrons of a large anion are far from its nucleus and loosely held.

📐 Rule 3.5 — Fajans' rules

The covalent character of a bond between a cation and an anion increases when:

  1. the cation is small (high polarising power): $\mathrm{LiCl}\gt\mathrm{NaCl}\gt\mathrm{KCl}$ in covalent character;
  2. the cation has a high charge: $\mathrm{AlCl_{3}}\gt\mathrm{MgCl_{2}}\gt\mathrm{NaCl}$; $\mathrm{SnCl_{4}}\gt\mathrm{SnCl_{2}}$;
  3. the anion is large (high polarisability): $\mathrm{LiI}\gt\mathrm{LiBr}\gt\mathrm{LiCl}\gt\mathrm{LiF}$;
  4. the anion has a high charge: oxides and sulphides are more covalent than the corresponding halides, e.g. $\mathrm{Na_{2}S}$ more than NaCl;
  5. the cation has a non-noble-gas configuration, especially the 18-electron configuration $(n-1)d^{10}$ of $\mathrm{Cu^{+}}$, $\mathrm{Ag^{+}}$, $\mathrm{Zn^{2+}}$, $\mathrm{Cd^{2+}}$, $\mathrm{Hg^{2+}}$: the $d$ electrons shield the nucleus poorly, so the cation polarises more strongly than a noble-gas cation of the same size and charge — AgCl is more covalent than NaCl although $\mathrm{Ag^{+}}$ ($115\ \mathrm{pm}$) is larger than $\mathrm{Na^{+}}$ ($102\ \mathrm{pm}$).

Comparisons are valid when the other factors are similar. Greater covalent character shows up as lower melting point, lower solubility in water and higher solubility in non-polar solvents, and often as colour.

The rules explain many facts. $\mathrm{NaCl}$ melts at $801\ ^{\circ}\mathrm{C}$, $\mathrm{MgCl_{2}}$ at $714\ ^{\circ}\mathrm{C}$, while anhydrous $\mathrm{AlCl_{3}}$ sublimes near $180\ ^{\circ}\mathrm{C}$: the tiny, triply charged $\mathrm{Al^{3+}}$ polarises chloride so strongly that the "salt" behaves like a covalent molecular compound. Lithium chloride, unlike the other alkali chlorides, dissolves in ethanol and acetone. Among the silver halides only AgF dissolves freely in water; AgCl, AgBr and AgI are progressively less soluble and more deeply coloured (white, pale yellow, yellow) as the anion grows more polarisable. And NaCl melts at $801\ ^{\circ}\mathrm{C}$ while CuCl, with an 18-electron cation, melts at only $423\ ^{\circ}\mathrm{C}$.

✏️ Example 3 — Fajans' rules in action
Arrange each set in order of increasing covalent character and give the deciding factor: (a) $\mathrm{CsCl}$, $\mathrm{NaCl}$, $\mathrm{LiCl}$, $\mathrm{KCl}$; (b) $\mathrm{NaF}$, $\mathrm{NaI}$, $\mathrm{NaBr}$; (c) $\mathrm{NaCl}$, $\mathrm{AgCl}$; (d) $\mathrm{FeCl_{2}}$, $\mathrm{FeCl_{3}}$. Then (e) explain why $\mathrm{BeCl_{2}}$ has much more covalent character than $\mathrm{BaCl_{2}}$, using $\phi=z/r$ with $r(\mathrm{Be^{2+}})=45\ \mathrm{pm}$ and $r(\mathrm{Ba^{2+}})=135\ \mathrm{pm}$.
(a) $\mathrm{CsCl}\lt\mathrm{KCl}\lt\mathrm{NaCl}\lt\mathrm{LiCl}$ — same anion and charge; the smaller the cation, the greater its polarising power.
(b) $\mathrm{NaF}\lt\mathrm{NaBr}\lt\mathrm{NaI}$ — same cation; the larger anion is more polarisable.
(c) $\mathrm{NaCl}\lt\mathrm{AgCl}$ — similar sizes and equal charges, but $\mathrm{Ag^{+}}$ ($[\mathrm{Kr}]4d^{10}$) has an 18-electron shell that shields its nucleus poorly. This is why AgCl is insoluble in water while NaCl dissolves.
(d) $\mathrm{FeCl_{2}}\lt\mathrm{FeCl_{3}}$ — $\mathrm{Fe^{3+}}$ has a higher charge and a smaller radius than $\mathrm{Fe^{2+}}$. ($\mathrm{FeCl_{3}}$ sublimes near $315\ ^{\circ}\mathrm{C}$; $\mathrm{FeCl_{2}}$ melts at $677\ ^{\circ}\mathrm{C}$.)
(e) $\phi(\mathrm{Be^{2+}})=2/45=0.044\ \mathrm{pm^{-1}}$; $\phi(\mathrm{Ba^{2+}})=2/135=0.015\ \mathrm{pm^{-1}}$ — three times smaller. The very high charge density of $\mathrm{Be^{2+}}$ distorts chloride so much that $\mathrm{BeCl_{2}}$ is essentially covalent (it is a chain polymer in the solid and a linear molecule in the vapour).

Which of the following compounds has the greatest covalent character?

Dipole moment and molecular polarity

A polar bond has separated charges $+q$ and $-q$ a distance $d$ apart. Physics calls such an arrangement an electric dipole and measures its strength by the product $q\times d$. Molecules with permanent dipoles line up in an electric field, and this lets their dipole moments be measured.

📘 Definition 3.8 — Dipole moment; percentage ionic character

The dipole moment of a pair of equal and opposite charges $\pm q$ separated by a distance $d$ is

$$\mu=q\times d .$$

It is a vector. In chemistry it is drawn as an arrow from the positive towards the negative end, with a small cross on the tail at the positive end ($\mathrm{H}$ ⟼ $\mathrm{Cl}$). The SI unit is the coulomb metre; chemists use the debye: $1\ \mathrm{D}=3.336\times10^{-30}\ \mathrm{C\,m}$. A full electronic charge at $1\ \text{Å}$ gives $1.602\times10^{-19}\times10^{-10}\ \mathrm{C\,m}=4.80\ \mathrm{D}$.

If the bond were completely ionic, the charges would be $\pm e$ and the dipole moment $\mu_\text{ionic}=e\times d$. The percentage ionic character of a bond is estimated as

$$\%\ \text{ionic character}=\frac{\mu_\text{observed}}{e\times d}\times100 .$$

For HCl ($\mu=1.03\ \mathrm{D}$, $d=127\ \mathrm{pm}$), $e\times d=4.80\times1.27=6.10\ \mathrm{D}$, so HCl is about $17\%$ ionic: the partial charges are about $\pm0.17e$. A bond has a bond moment; a polyatomic molecule has a dipole moment equal to the vector sum of its bond moments (plus a contribution from lone pairs, which are electron density pointing away from the nucleus).

📐 Result 3.6 — Dipole moment of a polyatomic molecule

The dipole moment of a molecule is the vector sum of its bond moments and lone-pair moments. For two bond moments $\mu_{1}$, $\mu_{2}$ at an angle $\theta$,

$$\mu_\text{R}=\sqrt{\mu_{1}^{2}+\mu_{2}^{2}+2\mu_{1}\mu_{2}\cos\theta},$$

which for equal moments becomes $\mu_\text{R}=2\mu\cos\tfrac{\theta}{2}$.

  • A molecule whose identical bonds are arranged symmetrically around a central atom with no lone pairs (linear $\mathrm{CO_{2}}$, $\mathrm{BeF_{2}}$; trigonal planar $\mathrm{BF_{3}}$; tetrahedral $\mathrm{CH_{4}}$, $\mathrm{CCl_{4}}$; trigonal bipyramidal $\mathrm{PCl_{5}}$; octahedral $\mathrm{SF_{6}}$) has zero dipole moment, however polar its bonds. So do square planar $\mathrm{XeF_{4}}$ and linear $\mathrm{XeF_{2}}$, where the lone pairs are also arranged symmetrically.
  • A non-zero dipole moment therefore proves an unsymmetrical shape: $\mu(\mathrm{H_{2}O})=1.85\ \mathrm{D}$ shows that water is bent, $\mu(\mathrm{CO_{2}})=0$ that carbon dioxide is linear.

Lone pairs matter: $\mathrm{NH_{3}}$ and $\mathrm{NF_{3}}$. Both are pyramidal with a lone pair on nitrogen, and the N–F bonds are more polar than the N–H bonds ($\Delta\chi=1.0$ against $0.9$). Yet $\mu(\mathrm{NH_{3}})=1.47\ \mathrm{D}$ while $\mu(\mathrm{NF_{3}})$ is only $0.23\ \mathrm{D}$. In $\mathrm{NH_{3}}$ the three bond moments point towards N (N is the negative end), in the same direction as the lone-pair moment, so they reinforce. In $\mathrm{NF_{3}}$ the bond moments point away from N towards the fluorine atoms, opposite to the lone-pair moment, and the two nearly cancel.

Isomers and dipole moments. The dipole moment distinguishes isomers. If the C–Cl bond moment in chlorobenzene is $\mu$, the three dichlorobenzenes have moments with the angle between the C–Cl bonds equal to $60^\circ$ (1,2-), $120^\circ$ (1,3-) and $180^\circ$ (1,4-): $\mu_\text{R}=\sqrt3\,\mu$, $\mu$ and $0$. Likewise trans-1,2-dichloroethene has $\mu=0$ while the cis isomer is polar. Among the chloromethanes, $\mathrm{CH_{3}Cl}$ ($1.86\ \mathrm{D}$) $\gt$ $\mathrm{CH_{2}Cl_{2}}$ ($1.60$) $\gt$ $\mathrm{CHCl_{3}}$ ($1.04$) $\gt$ $\mathrm{CCl_{4}}$ ($0$): adding chlorines makes the molecule more symmetrical.

✏️ Example 4 — Percentage ionic character of HCl and HF
The dipole moments and bond lengths are HCl $1.03\ \mathrm{D}$, $127\ \mathrm{pm}$ and HF $1.82\ \mathrm{D}$, $92\ \mathrm{pm}$. (a) Find the percentage ionic character of each bond. (b) Express the partial charge on H in HF in coulombs. (c) Which bond is more polar, and is this consistent with electronegativities? Use $e=1.602\times10^{-19}\ \mathrm{C}$ and $1\ \mathrm{D}=3.336\times10^{-30}\ \mathrm{C\,m}$.
Find the percentage ionic character of HCl before you open the solution:
μ(ionic) $e\times d$ in debye: $\dfrac{1.602\times10^{-19}\times1.27\times10^{-10}}{3.336\times10^{-30}}=6.10\ \mathrm{D}$ for HCl; for HF $\dfrac{1.602\times10^{-19}\times0.92\times10^{-10}}{3.336\times10^{-30}}=4.42\ \mathrm{D}$.
(a) HCl: $\dfrac{1.03}{6.10}\times100=16.9\%$. HF: $\dfrac{1.82}{4.42}\times100=41.2\%$.
(b) $q=0.412e=0.412\times1.602\times10^{-19}=6.6\times10^{-20}\ \mathrm{C}$ (equivalently $q=\mu/d=\dfrac{1.82\times3.336\times10^{-30}}{0.92\times10^{-10}}$).
(c) HF is far more polar, as $\Delta\chi$ predicts ($1.9$ against $0.9$). Note that HF has the larger percentage ionic character even though its bond is shorter — the dipole moment depends on both charge and distance, so compare percentages, not moments.
✏️ Example 5 — Bond moments from molecular dipole moments
(a) Water has $\mu=1.85\ \mathrm{D}$ and a bond angle of $104.5^\circ$. Find the O–H bond moment, ignoring the lone-pair contribution. (b) If the bond angle were $90^\circ$ with the same bond moment, what would $\mu$ be? (c) Taking the C–Cl bond moment as $1.6\ \mathrm{D}$ (and C–H as negligible), find the dipole moments of 1,2-, 1,3- and 1,4-dichlorobenzene.
Find the O–H bond moment in (a) first:
(a) $\mu_\text{R}=2\mu_\text{OH}\cos52.25^\circ$: $\mu_\text{OH}=\dfrac{1.85}{2\times0.612}=1.51\ \mathrm{D}$.
(b) $\mu=2(1.51)\cos45^\circ=2.14\ \mathrm{D}$ — a smaller angle lines the two bond moments up better.
(c) 1,2- ($60^\circ$): $2(1.6)\cos30^\circ=\sqrt3(1.6)=2.77\ \mathrm{D}$. 1,3- ($120^\circ$): $2(1.6)\cos60^\circ=1.6\ \mathrm{D}$. 1,4- ($180^\circ$): $0$.
Check Measured values are about $2.5$, $1.7$ and $0\ \mathrm{D}$. The 1,2-isomer is lower than predicted because the two neighbouring C–Cl dipoles also polarise each other — vector addition of fixed bond moments is an approximation.
JEE use Order of dipole moments $o\gt m\gt p$ for identical substituents; the $p$-isomer of a symmetrically disubstituted benzene is non-polar.

In the Dipole Adder choose custom and set $\mu_{1}=\mu_{2}=1.50\ \mathrm{D}$ and $\theta=120^\circ$. What is the resultant dipole moment?

With $\mu_{1}=\mu_{2}=1.50\ \mathrm{D}$ and $\theta=120^\circ$ the readout shows $\mu_\text{R}=1.50\ \mathrm{D}$ ($5.00\times10^{-30}\ \mathrm{C\,m}$), at $60.0^\circ$ from bond 1: $2\mu\cos60^\circ=\mu$. The parallelogram is made of two equilateral triangles. Now move $\theta$: at $90^\circ$ the resultant is $2.12\ \mathrm{D}$, at $180^\circ$ it is $0.00\ \mathrm{D}$ (the $\mathrm{CO_{2}}$ case), and only at $0^\circ$ does it reach $3.00\ \mathrm{D}$. Cancellation needs exactly opposite directions; at $120^\circ$ two bonds still leave a full bond's worth — which is why it takes a third bond at $120^\circ$ (as in $\mathrm{BF_{3}}$) to cancel them.
Interactive 1 — Dipole Adder: Bond Moments and Molecular Shape

Two bond moments (blue, drawn from $\delta+$ to $\delta-$) leave the central atom at an angle $\theta$. The lab completes the parallelogram and draws the resultant $\mu_\text{R}$ (red). Pick a molecule to load measured bond angles and bond moments (lone-pair contributions ignored), or choose custom and move the sliders. Press Play to replay the head-to-tail construction.

1.51 D1.51 D104.5°
resultant $\mu_\text{R}$—
in SI units—
direction (from bond 1)—
molecule is—

$\mathrm{NH_{3}}$ and $\mathrm{NF_{3}}$ are both pyramidal, yet $\mu(\mathrm{NH_{3}})=1.47\ \mathrm{D}$ and $\mu(\mathrm{NF_{3}})=0.23\ \mathrm{D}$. The best explanation is that

VSEPR theory and the shapes of molecules

Lewis structures say which atoms are bonded, but not where they are in space. In 1940 Sidgwick and Powell noticed that the shape of a molecule could be predicted simply by counting the electron pairs around the central atom; Gillespie and Nyholm (1957) refined the idea into the valence shell electron pair repulsion (VSEPR) theory.

📐 Principle 3.7 — Postulates of VSEPR theory
  1. The shape of a molecule is determined by the number of electron pairs — bond pairs and lone pairs — in the valence shell of the central atom.
  2. Electron pairs repel one another, because their electron clouds are negatively charged.
  3. The pairs arrange themselves as far apart as possible, to minimise the total repulsion. This fixes the electron-pair geometry: 2 pairs linear, 3 trigonal planar, 4 tetrahedral, 5 trigonal bipyramidal, 6 octahedral.
  4. A multiple bond is treated as one electron domain (a "super pair") for geometry, although it repels somewhat more than a single bond.
  5. When a species has two or more equivalent Lewis structures (resonance), VSEPR can be applied to any one of them.
  6. The shape of the molecule is described by the positions of the atoms only; lone pairs are invisible to experiment but take up space.
📐 Rule 3.8 — Order of electron-pair repulsions

A lone pair is held by one nucleus only, so its cloud is fatter and closer to the central atom than that of a bond pair, which is pulled out between two nuclei. Hence

$$\text{lone pair–lone pair}\gt\text{lone pair–bond pair}\gt\text{bond pair–bond pair}.$$

Consequences: (i) lone pairs squeeze bond angles below the ideal values; (ii) in a trigonal bipyramid lone pairs take equatorial positions (an equatorial position has only two neighbours at $90^\circ$; an axial one has three); (iii) in an octahedron a second lone pair goes opposite (trans to) the first.

PairsBond pairsLone pairsElectron-pair geometryShapeExamples (bond angle)
220linearlinear$\mathrm{BeCl_{2}}$, $\mathrm{CO_{2}}$ ($180^\circ$)
330trigonal planartrigonal planar$\mathrm{BF_{3}}$, $\mathrm{SO_{3}}$ ($120^\circ$)
321trigonal planarbent (V-shaped)$\mathrm{SO_{2}}$ ($119.5^\circ$), $\mathrm{SnCl_{2}}$
440tetrahedraltetrahedral$\mathrm{CH_{4}}$, $\mathrm{NH_{4}^{+}}$ ($109.5^\circ$)
431tetrahedraltrigonal pyramidal$\mathrm{NH_{3}}$ ($107^\circ$), $\mathrm{XeO_{3}}$
422tetrahedralbent (V-shaped)$\mathrm{H_{2}O}$ ($104.5^\circ$)
550trigonal bipyramidaltrigonal bipyramidal$\mathrm{PCl_{5}}$ ($120^\circ$, $90^\circ$)
541trigonal bipyramidalsee-saw$\mathrm{SF_{4}}$ (about $102^\circ$, $173^\circ$)
532trigonal bipyramidalT-shaped$\mathrm{ClF_{3}}$ (about $87.5^\circ$)
523trigonal bipyramidallinear$\mathrm{XeF_{2}}$, $\mathrm{I_{3}^{-}}$ ($180^\circ$)
660octahedraloctahedral$\mathrm{SF_{6}}$ ($90^\circ$)
651octahedralsquare pyramidal$\mathrm{BrF_{5}}$, $\mathrm{IF_{5}}$ (about $85^\circ$)
642octahedralsquare planar$\mathrm{XeF_{4}}$, $\mathrm{ICl_{4}^{-}}$ ($90^\circ$)
🧭 Problem-solving strategy — Predicting a shape with VSEPR
  1. Valence electrons of the central atom $V$ (its group number minus 10 for Groups 13–18); add one per negative charge, subtract one per positive charge.
  2. Subtract the electrons it uses for bonding: one for each monovalent atom (H, F, Cl, Br, I) and two for each doubly bonded O or S.
  3. Lone pairs $=$ remainder $\div2$; electron domains (steric number) $=$ number of bonded atoms $+$ lone pairs. In one line: $\text{lp}=\tfrac12\,(V-\text{charge}-n_{1}-2n_{2})$.
  4. Geometry from the number of domains; put the lone pairs where they repel least (equatorial in a trigonal bipyramid, trans in an octahedron).
  5. Name the shape from the atoms only, and adjust the angles: each lone pair squeezes the bond angles.

Bond angles: three trends. VSEPR also explains small differences in bond angle between molecules of the same shape.

📐 Result 3.9 — Trends in bond angles
  1. Lone pairs: with four electron pairs, each lone pair reduces the angle — $\mathrm{CH_{4}}$ $109.5^\circ$ $\gt$ $\mathrm{NH_{3}}$ $107^\circ$ $\gt$ $\mathrm{H_{2}O}$ $104.5^\circ$.
  2. Electronegativity of the central atom (same ligands, same number of lone pairs): a more electronegative central atom pulls the bond pairs closer to itself, where they repel more, so the angle is larger — $\mathrm{NH_{3}}$ $107^\circ$ $\gt$ $\mathrm{PH_{3}}$ $93.5^\circ$; $\mathrm{H_{2}O}$ $104.5^\circ$ $\gt$ $\mathrm{H_{2}S}$ $92^\circ$.
  3. Electronegativity of the outer atoms (same central atom): more electronegative ligands pull the bond pairs away from the central atom, they repel less, and the angle closes — $\mathrm{NH_{3}}$ $107^\circ$ $\gt$ $\mathrm{NF_{3}}$ $102^\circ$; $\mathrm{H_{2}O}$ $104.5^\circ$ $\gt$ $\mathrm{OF_{2}}$ $103^\circ$.

These are tendencies for molecules of the same type; compare only like with like. The very small angles near $90^\circ$ in $\mathrm{PH_{3}}$ and $\mathrm{H_{2}S}$ are better explained by hybridisation (Section 3.3).

✏️ Example 6 — Shapes from pair counts
(a) Predict the shapes of $\mathrm{SF_{4}}$, $\mathrm{ClF_{3}}$, $\mathrm{XeF_{4}}$ and $\mathrm{I_{3}^{-}}$, giving the number of lone pairs on the central atom. (b) Explain why the lone pair in $\mathrm{SF_{4}}$ is equatorial and not axial. (c) Arrange $\mathrm{NH_{3}}$, $\mathrm{NF_{3}}$, $\mathrm{PH_{3}}$ and $\mathrm{NH_{4}^{+}}$ in order of decreasing H–X–H or F–X–F bond angle. (d) Which of the four species in (a) have zero dipole moment?
SF₄ $\text{lp}=\tfrac12(6-4)=1$; 5 domains, trigonal bipyramidal; lone pair equatorial → see-saw.
ClF₃ $\text{lp}=\tfrac12(7-3)=2$; 5 domains; both lone pairs equatorial → T-shaped, F–Cl–F about $87.5^\circ$ (squeezed below $90^\circ$).
XeF₄, I₃⁻ $\mathrm{XeF_{4}}$: $\text{lp}=\tfrac12(8-4)=2$; 6 domains; lone pairs trans → square planar. $\mathrm{I_{3}^{-}}$: central I, $\text{lp}=\tfrac12(7+1-2)=3$; 5 domains; three equatorial lone pairs leave the two outer I atoms axial → linear.
(b) Count the $90^\circ$ interactions of the lone pair (the strongest repulsions). Equatorial: two lp–bp at $90^\circ$ (with the axial bonds). Axial: three lp–bp at $90^\circ$ (with the equatorial bonds). Fewer strong repulsions → equatorial.
(c) $\mathrm{NH_{4}^{+}}$ ($109.5^\circ$, no lone pair) $\gt$ $\mathrm{NH_{3}}$ ($107^\circ$) $\gt$ $\mathrm{NF_{3}}$ ($102^\circ$, electronegative ligands) $\gt$ $\mathrm{PH_{3}}$ ($93.5^\circ$, less electronegative central atom).
(d) $\mathrm{XeF_{4}}$ and $\mathrm{I_{3}^{-}}$ (both bonds and lone pairs arranged symmetrically). $\mathrm{SF_{4}}$ and $\mathrm{ClF_{3}}$ are polar.

In the VSEPR Shape Builder select $\mathrm{ClF_{3}}$. Chlorine has five electron domains. Which shape will the lab show?

Select $\mathrm{ClF_{3}}$: the readouts show "Cl: 7 valence e⁻ − 3 used → 2 lone pairs", "5 domains → trigonal bipyramidal", shape "T-shaped" and bond angle "≈ 87.5°". The two lone pairs (purple) sit in the equatorial plane at $120^\circ$ to each other, leaving one equatorial and two axial F atoms — a T. Trigonal planar would need only three domains (as in $\mathrm{BF_{3}}$); see-saw has one lone pair ($\mathrm{SF_{4}}$). Compare $\mathrm{XeF_{2}}$: three equatorial lone pairs leave a linear molecule.
Interactive 2 — VSEPR Shape Builder

Choose a molecule or ion. The lab counts the electrons on the central atom, finds the lone pairs and the number of electron domains, places the domains as far apart as possible (lone pairs, purple, where they repel least) and draws a 3-D model: central atom grey, outer atoms blue, double bonds as double lines. The shape is named from the atoms alone. Press Play to rotate the model, or drag the slider.

electron count—
domains → geometry—
shape—
bond angle—
⚠️ JEE Main traps

1. Polar bonds, non-polar molecule. $\mathrm{CO_{2}}$, $\mathrm{BF_{3}}$, $\mathrm{CCl_{4}}$, $\mathrm{PCl_{5}}$, $\mathrm{SF_{6}}$, $\mathrm{XeF_{2}}$ and $\mathrm{XeF_{4}}$ all have polar bonds and zero dipole moment. Decide polarity from the shape, never from the bonds alone.

2. Shape is not geometry. $\mathrm{H_{2}O}$ has a tetrahedral electron-pair geometry but a bent shape; $\mathrm{XeF_{2}}$ has a trigonal bipyramidal geometry but is linear; $\mathrm{SF_{4}}$ is see-saw, not tetrahedral. Lone pairs count for the geometry but not for the name of the shape.

3. Where the lone pairs go. Trigonal bipyramid: always equatorial. Octahedron: the second lone pair trans to the first (square planar $\mathrm{XeF_{4}}$, not see-saw).

4. Formal charge, oxidation number and real charge are three different things. In CO the formal charges are $-1$ (C) and $+1$ (O); the oxidation numbers are $+2$ and $-2$; the real partial charges are tiny.

5. Fajans' exceptions to "bigger cation = more ionic". $\mathrm{Ag^{+}}$ and $\mathrm{Cu^{+}}$ (18-electron shells) polarise more than $\mathrm{Na^{+}}$ and $\mathrm{K^{+}}$ of similar size: AgCl and CuCl are more covalent than NaCl. And the dipole arrow in chemistry points from $+$ to $-$; physics draws the dipole moment vector from $-$ to $+$ — read the convention before adding arrows.

What is the shape of $\mathrm{SF_{4}}$?

Exercises

Use the Pauling electronegativities in the table above, $1\ \mathrm{D}=3.336\times10^{-30}\ \mathrm{C\,m}$ and $e\times(1\ \text{Å})=4.80\ \mathrm{D}$.

I
Lewis structures and formal charge.
  • 1 Find the total number of valence electrons in $\mathrm{SO_{4}^{2-}}$, and draw a Lewis structure with an octet on every atom.
  • 2 Draw the Lewis structure of HCN. How many lone pairs and how many bond pairs does it contain?
  • 3 Find the formal charge on nitrogen in the nitronium ion, $[\mathrm{O{=}N{=}O}]^{+}$.
  • 4 In the Lewis structure of nitric acid, $\mathrm{HO{-}N({=}O){-}O}$, with an octet on N and every O, find the formal charge on each atom.
  • 5 How many lone pairs are there in total (on all atoms) in the Lewis structure of $\mathrm{XeF_{4}}$?
  • 6 Ammonia and boron trifluoride combine to form the adduct $\mathrm{H_{3}N\rightarrow BF_{3}}$. Identify the donor and acceptor and find the formal charge on B.
  • 7 For the cyanate ion $\mathrm{OCN^{-}}$ (C central) compare the structures $\mathrm{[O{=}C{=}N]^{-}}$, $\mathrm{[O{\equiv}C{-}N]^{-}}$ and $\mathrm{[O{-}C{\equiv}N]^{-}}$ by formal charges, and say which is best.
  • 8 The formal charges in CO are $-1$ on C and $+1$ on O, yet the molecule is almost non-polar. Explain why formal charges are not real charges.
1 $6+4\times6+2=$ 32. Octet structure: S at the centre with four S–O single bonds, each O with three lone pairs (FC: S $+2$, each O $-1$). Because S is in period 3, structures with two S=O bonds (S with 12 electrons, FC S $0$, two O $-1$) have smaller formal charges and are often preferred.
2 $\mathrm{H{-}C{\equiv}N{:}}$ ($1+4+5=10$ electrons): 4 bond pairs (one C–H, three C–N) and 1 lone pair (on N).
3 N has no lone pairs and two double bonds: $5-0-\tfrac12(8)=$ $+1$; each O: $6-4-2=0$. Total $+1$ ✓.
4 N (four bonds, no lone pair): $5-0-4=+1$. Double-bonded O: $6-4-2=0$. Singly bonded O (three lone pairs): $6-6-1=-1$. O of OH (two bonds, two lone pairs): $0$. H: $0$. Sum $0$ ✓.
5 Xe has $\tfrac12(8-4)=2$ lone pairs; each F has 3. Total $2+4\times3=$ 14.
6 N (lone pair) is the donor, B (vacant orbital, only 6 electrons in $\mathrm{BF_{3}}$) the acceptor. In the adduct B has four bonds and no lone pairs: $3-0-4=$ $-1$; N: $5-0-4=+1$.
7 $\mathrm{[O{=}C{=}N]^{-}}$: O $0$, C $0$, N $-1$. $\mathrm{[O{\equiv}C{-}N]^{-}}$: O $+1$, C $0$, N $-2$. $\mathrm{[O{-}C{\equiv}N]^{-}}$: O $-1$, C $0$, N $0$. The first and third have the smallest formal charges; the third puts $-1$ on the more electronegative oxygen and is the best single structure (the real ion lies between them).
8 Formal charge assumes every bond pair is shared exactly equally. In reality O pulls the bond pairs towards itself (higher electronegativity), which works against the formal $+1$ on O. The two effects almost cancel, leaving $\mu=0.11\ \mathrm{D}$.
II
Electronegativity, polar bonds and Fajans' rules.
  • 1 Arrange the bonds C–H, N–H, O–H and F–H in order of increasing polarity, with $\Delta\chi$ for each.
  • 2 Find $\Delta\chi$ for the K–F bond and classify the bond.
  • 3 Arrange LiCl, NaCl, KCl and CsCl in order of decreasing covalent character.
  • 4 Arrange NaCl, $\mathrm{MgCl_{2}}$ and $\mathrm{AlCl_{3}}$ in order of decreasing melting point and explain.
  • 5 Explain why AgF is soluble in water but AgI is not, and why AgI is yellow.
  • 6 Calculate the ratio of the ionic potentials $\phi=z/r$ of $\mathrm{Mg^{2+}}$ ($72\ \mathrm{pm}$) and $\mathrm{Li^{+}}$ ($76\ \mathrm{pm}$), $\phi(\mathrm{Mg^{2+}})/\phi(\mathrm{Li^{+}})$.
  • 7 $\mathrm{SnCl_{2}}$ is a solid melting at $247\ ^{\circ}\mathrm{C}$; $\mathrm{SnCl_{4}}$ is a liquid boiling at $114\ ^{\circ}\mathrm{C}$. Explain.
  • 8 Which is more covalent in each pair: (a) $\mathrm{CaF_{2}}$ or $\mathrm{CaI_{2}}$, (b) $\mathrm{ZnCl_{2}}$ or $\mathrm{CaCl_{2}}$ (similar cation radii), (c) $\mathrm{Na_{2}O}$ or NaF?
1 C–H ($0.4$) $\lt$ N–H ($0.9$) $\lt$ O–H ($1.4$) $\lt$ F–H ($1.9$).
2 $\Delta\chi=4.0-0.8=$ $3.2$ — far above $1.7$: an ionic bond.
3 $\mathrm{LiCl}\gt\mathrm{NaCl}\gt\mathrm{KCl}\gt\mathrm{CsCl}$: the polarising power falls as the cation grows.
4 $\mathrm{NaCl}$ ($801\ ^{\circ}\mathrm{C}$) $\gt$ $\mathrm{MgCl_{2}}$ ($714$) $\gt$ $\mathrm{AlCl_{3}}$ (sublimes about $180\ ^{\circ}\mathrm{C}$). Cation charge rises and radius falls ($\mathrm{Na^{+}}$ 102, $\mathrm{Mg^{2+}}$ 72, $\mathrm{Al^{3+}}$ 54 pm), so polarisation and covalent character rise and the melting point falls.
5 $\mathrm{F^{-}}$ is small and hardly polarisable, so AgF is essentially ionic and dissolves (hydration repays the lattice). $\mathrm{I^{-}}$ is large and easily polarised by $\mathrm{Ag^{+}}$ (18-electron cation): AgI has much covalent character, a lattice that water cannot break, and electronic transitions shifted into the visible — hence the yellow colour.
6 $\dfrac{2/72}{1/76}=\dfrac{152}{72}=$ $2.11$. Mg²⁺ is the stronger polariser; it resembles $\mathrm{Al^{3+}}$ rather than $\mathrm{Li^{+}}$ in this respect.
7 $\mathrm{Sn^{4+}}$ has twice the charge of $\mathrm{Sn^{2+}}$ and is smaller, so it polarises chloride far more: $\mathrm{SnCl_{4}}$ is a covalent molecular compound held only by weak intermolecular forces, hence volatile.
8 (a) $\mathrm{CaI_{2}}$ (larger, more polarisable anion). (b) $\mathrm{ZnCl_{2}}$ ($\mathrm{Zn^{2+}}$ has an 18-electron $3d^{10}$ shell). (c) $\mathrm{Na_{2}O}$ ($\mathrm{O^{2-}}$ has a higher charge than $\mathrm{F^{-}}$ and is more polarisable).
III
Dipole moments.
  • 1 HBr has $\mu=0.79\ \mathrm{D}$ and a bond length of $141\ \mathrm{pm}$. Find its percentage ionic character.
  • 2 A gaseous KCl molecule has $\mu=10.27\ \mathrm{D}$ and a bond length of $267\ \mathrm{pm}$. Find its percentage ionic character and comment.
  • 3 Two equal bond moments of $1.20\ \mathrm{D}$ make an angle of $90^\circ$. Find the resultant.
  • 4 $\mathrm{H_{2}S}$ has $\mu=0.97\ \mathrm{D}$ and a bond angle of $92^\circ$. Find the S–H bond moment (ignore lone pairs).
  • 5 How many of these have zero dipole moment: $\mathrm{CO_{2}}$, $\mathrm{SO_{2}}$, $\mathrm{BF_{3}}$, $\mathrm{NF_{3}}$, $\mathrm{CH_{4}}$, $\mathrm{CHCl_{3}}$, $\mathrm{SF_{4}}$, $\mathrm{XeF_{4}}$?
  • 6 Arrange $\mathrm{CH_{3}Cl}$, $\mathrm{CH_{2}Cl_{2}}$, $\mathrm{CHCl_{3}}$ and $\mathrm{CCl_{4}}$ in order of decreasing dipole moment and explain the trend.
  • 7 Taking the C–Cl bond moment as $1.6\ \mathrm{D}$, find the dipole moment of 1,2-dichlorobenzene by vector addition.
  • 8 Express the dipole moment of water, $1.85\ \mathrm{D}$, in $\mathrm{C\,m}$. If water's dipole were a pair of charges $\pm q$ $0.1\ \mathrm{nm}$ apart, what would $q$ be as a fraction of $e$?
1 $e\times d=4.80\times1.41=6.77\ \mathrm{D}$; $\dfrac{0.79}{6.77}\times100=$ $11.7\%$.
2 $e\times d=4.80\times2.67=12.82\ \mathrm{D}$; $\dfrac{10.27}{12.82}\times100=$ $80.1\%$. Even an isolated K–Cl molecule is mostly ionic; the remaining 20% reflects polarisation of $\mathrm{Cl^{-}}$ by $\mathrm{K^{+}}$.
3 $\mu_\text{R}=\sqrt{1.20^{2}+1.20^{2}}=1.20\sqrt2=$ $1.70\ \mathrm{D}$.
4 $\mu_\text{SH}=\dfrac{0.97}{2\cos46^\circ}=\dfrac{0.97}{1.389}=$ $0.70\ \mathrm{D}$ — less than half the O–H moment, as $\Delta\chi$ ($0.4$ vs $1.4$) suggests.
5 Zero: $\mathrm{CO_{2}}$ (linear), $\mathrm{BF_{3}}$ (trigonal planar), $\mathrm{CH_{4}}$ (tetrahedral), $\mathrm{XeF_{4}}$ (square planar) — 4. Polar: $\mathrm{SO_{2}}$ (bent), $\mathrm{NF_{3}}$ (pyramidal), $\mathrm{CHCl_{3}}$ (unsymmetrical tetrahedron), $\mathrm{SF_{4}}$ (see-saw).
6 $\mathrm{CH_{3}Cl}$ ($1.86$) $\gt$ $\mathrm{CH_{2}Cl_{2}}$ ($1.60$) $\gt$ $\mathrm{CHCl_{3}}$ ($1.04$) $\gt$ $\mathrm{CCl_{4}}$ ($0$). Each added C–Cl bond partly opposes the others in the tetrahedron; with four identical bonds they cancel exactly.
7 Angle between the C–Cl bonds $60^\circ$: $\mu=2(1.6)\cos30^\circ=$ $2.77\ \mathrm{D}$.
8 $1.85\times3.336\times10^{-30}=6.17\times10^{-30}\ \mathrm{C\,m}$. $q=\dfrac{6.17\times10^{-30}}{1.0\times10^{-10}}=6.17\times10^{-20}\ \mathrm{C}=0.39e$.
IV
VSEPR theory, shapes and bond angles.
  • 1 Predict the shapes of $\mathrm{BeCl_{2}}$ (gas), $\mathrm{BCl_{3}}$, $\mathrm{SiCl_{4}}$, $\mathrm{AsF_{5}}$, $\mathrm{H_{2}S}$ and $\mathrm{PH_{3}}$.
  • 2 Find the total number of lone pairs on the central atoms of $\mathrm{IF_{5}}$, $\mathrm{ICl_{2}^{-}}$, $\mathrm{XeO_{3}}$ and $\mathrm{SO_{3}}$ taken together.
  • 3 How many F–S–F bond angles of $90^\circ$ are there in $\mathrm{SF_{6}}$?
  • 4 How many Cl–P–Cl angles of $90^\circ$ are there in $\mathrm{PCl_{5}}$, and how many of $120^\circ$?
  • 5 Arrange $\mathrm{CH_{4}}$, $\mathrm{NH_{3}}$, $\mathrm{H_{2}O}$ and $\mathrm{NH_{4}^{+}}$ in order of decreasing bond angle.
  • 6 Arrange $\mathrm{H_{2}O}$, $\mathrm{H_{2}S}$ and $\mathrm{OF_{2}}$ in order of decreasing bond angle and explain each step.
  • 7 Explain why $\mathrm{XeF_{4}}$ is square planar rather than tetrahedral, although it has four Xe–F bonds.
  • 8 How many of the following are T-shaped: $\mathrm{ClF_{3}}$, $\mathrm{BrF_{3}}$, $\mathrm{NH_{3}}$, $\mathrm{ICl_{3}}$ (monomer), $\mathrm{BF_{3}}$?
1 $\mathrm{BeCl_{2}}$ linear (2, 0); $\mathrm{BCl_{3}}$ trigonal planar (3, 0); $\mathrm{SiCl_{4}}$ tetrahedral (4, 0); $\mathrm{AsF_{5}}$ trigonal bipyramidal (5, 0); $\mathrm{H_{2}S}$ bent (2, 2); $\mathrm{PH_{3}}$ trigonal pyramidal (3, 1). (Bond pairs, lone pairs.)
2 $\mathrm{IF_{5}}$: $\tfrac12(7-5)=1$. $\mathrm{ICl_{2}^{-}}$: $\tfrac12(7+1-2)=3$. $\mathrm{XeO_{3}}$: $\tfrac12(8-6)=1$. $\mathrm{SO_{3}}$: $\tfrac12(6-6)=0$. Total 5.
3 Each F has four neighbours at $90^\circ$ (all except the one opposite it): $\tfrac12\times6\times4=$ 12 (and three angles of $180^\circ$).
4 Each of the 2 axial Cl makes $90^\circ$ with the 3 equatorial Cl: 6. The equatorial Cl atoms make 3 angles of $120^\circ$; the two axial Cl make one of $180^\circ$. Check: $6+3+1=10=\binom52$ ✓.
5 $\mathrm{CH_{4}}=\mathrm{NH_{4}^{+}}$ ($109.5^\circ$) $\gt$ $\mathrm{NH_{3}}$ ($107^\circ$) $\gt$ $\mathrm{H_{2}O}$ ($104.5^\circ$): no, one and two lone pairs.
6 $\mathrm{H_{2}O}$ ($104.5^\circ$) $\gt$ $\mathrm{OF_{2}}$ ($103^\circ$) $\gt$ $\mathrm{H_{2}S}$ ($92^\circ$). Replacing H by electronegative F pulls the bond pairs away from O, reducing their repulsion; replacing O by the less electronegative, larger S lets the bond pairs spread out far from the centre, reducing it much more.
7 Xe has $\tfrac12(8-4)=2$ lone pairs: six domains, octahedral. The two lone pairs go trans to each other (lp–lp at $180^\circ$ instead of $90^\circ$), and the four F atoms are left in a square.
8 $\mathrm{ClF_{3}}$, $\mathrm{BrF_{3}}$ and $\mathrm{ICl_{3}}$ (3 bond pairs + 2 lone pairs each) are T-shaped: 3. $\mathrm{NH_{3}}$ is pyramidal and $\mathrm{BF_{3}}$ trigonal planar.
🎯 Exam corner JEE Main · MCQJEE Main · Numerical

E1. JEE Main · MCQ Which pair of species has the same shape but a different number of lone pairs on the central atom? (A) $\mathrm{XeF_{2}}$ and $\mathrm{CO_{2}}$ (B) $\mathrm{SF_{4}}$ and $\mathrm{CH_{4}}$ (C) $\mathrm{H_{2}O}$ and $\mathrm{BeCl_{2}}$ (D) $\mathrm{BF_{3}}$ and $\mathrm{NH_{3}}$

Count $\mathrm{XeF_{2}}$: $\tfrac12(8-2)=3$ lone pairs, linear. $\mathrm{CO_{2}}$: $\tfrac12(4-4)=0$, linear. Same shape, different lone pairs.
Others (B) see-saw vs tetrahedral; (C) bent vs linear; (D) trigonal planar vs pyramidal — different shapes.
Answer (A).
⏱ Shortcut Linear molecules come from 2 domains (no lone pairs) or 5 domains (three equatorial lone pairs) — a favourite JEE pairing.

E2. JEE Main · Numerical The total number of lone pairs of electrons on the central atoms of $\mathrm{XeF_{4}}$, $\mathrm{ClF_{3}}$, $\mathrm{SF_{4}}$, $\mathrm{I_{3}^{-}}$ and $\mathrm{BrF_{5}}$ taken together is ______. Give the answer to the nearest integer.

Each $\mathrm{XeF_{4}}$ $\tfrac12(8-4)=2$; $\mathrm{ClF_{3}}$ $\tfrac12(7-3)=2$; $\mathrm{SF_{4}}$ $\tfrac12(6-4)=1$; $\mathrm{I_{3}^{-}}$ $\tfrac12(7+1-2)=3$; $\mathrm{BrF_{5}}$ $\tfrac12(7-5)=1$.
Sum $2+2+1+3+1=9$.
Answer $9$.
⏱ Shortcut $\text{lp}=\tfrac12(V-\text{charge}-n)$ for monovalent ligands — remember the extra electron of the negative charge in $\mathrm{I_{3}^{-}}$.

E3. JEE Main · MCQ The correct order of dipole moments is (A) $\mathrm{NF_{3}}\gt\mathrm{NH_{3}}\gt\mathrm{BF_{3}}$ (B) $\mathrm{BF_{3}}\gt\mathrm{NF_{3}}\gt\mathrm{NH_{3}}$ (C) $\mathrm{NH_{3}}\gt\mathrm{NF_{3}}\gt\mathrm{BF_{3}}$ (D) $\mathrm{NH_{3}}\gt\mathrm{BF_{3}}\gt\mathrm{NF_{3}}$

BF₃ Trigonal planar with three identical bonds: $\mu=0$, the smallest.
NH₃ vs NF₃ Both pyramidal; in $\mathrm{NH_{3}}$ the bond moments reinforce the lone-pair moment ($1.47\ \mathrm{D}$), in $\mathrm{NF_{3}}$ they oppose it ($0.23\ \mathrm{D}$).
Answer (C).

E4. JEE Main · Numerical A diatomic molecule has a dipole moment of $1.20\ \mathrm{D}$ and a bond length of $100\ \mathrm{pm}$. Taking $e=1.6\times10^{-19}\ \mathrm{C}$ and $1\ \mathrm{D}=3.33\times10^{-30}\ \mathrm{C\,m}$, the percentage ionic character of the bond is ______. Give the answer to the nearest integer.

μ(ionic) $e\times d=1.6\times10^{-19}\times1.00\times10^{-10}=1.6\times10^{-29}\ \mathrm{C\,m}=\dfrac{1.6\times10^{-29}}{3.33\times10^{-30}}=4.80\ \mathrm{D}$.
Ratio $\dfrac{1.20}{4.80}\times100=25.0\%$.
Answer $25$.
⏱ Shortcut $e\times(1\ \text{Å})=4.8\ \mathrm{D}$; here $d=1\ \text{Å}$, so $\%=\mu/4.8\times100$.

E5. JEE Main · MCQ The correct order of covalent character is (A) $\mathrm{NaCl}\gt\mathrm{MgCl_{2}}\gt\mathrm{AlCl_{3}}$ (B) $\mathrm{AlCl_{3}}\gt\mathrm{MgCl_{2}}\gt\mathrm{NaCl}$ (C) $\mathrm{LiF}\gt\mathrm{LiCl}\gt\mathrm{LiI}$ (D) $\mathrm{KCl}\gt\mathrm{NaCl}\gt\mathrm{LiCl}$

Fajans Covalent character grows with cation charge and with decreasing cation size: $\mathrm{Al^{3+}}\gt\mathrm{Mg^{2+}}\gt\mathrm{Na^{+}}$ in polarising power, so (B) is right and (A) is reversed.
Others (C) and (D) are both reversed: covalent character is $\mathrm{LiI}\gt\mathrm{LiCl}\gt\mathrm{LiF}$ (larger anion) and $\mathrm{LiCl}\gt\mathrm{NaCl}\gt\mathrm{KCl}$ (smaller cation).
Answer (B).

E6. JEE Main · Numerical The number of species with zero dipole moment among $\mathrm{SF_{6}}$, $\mathrm{NH_{3}}$, $\mathrm{CO_{2}}$, $\mathrm{SO_{2}}$, $\mathrm{BCl_{3}}$, $\mathrm{CHCl_{3}}$, $\mathrm{XeF_{2}}$, $\mathrm{SF_{4}}$, $\mathrm{ICl_{4}^{-}}$ and $\mathrm{H_{2}S}$ is ______. Give the answer to the nearest integer.

Symmetric $\mathrm{SF_{6}}$ (octahedral), $\mathrm{CO_{2}}$ (linear), $\mathrm{BCl_{3}}$ (trigonal planar), $\mathrm{XeF_{2}}$ (linear, three equatorial lone pairs), $\mathrm{ICl_{4}^{-}}$ (square planar, trans lone pairs).
Polar $\mathrm{NH_{3}}$ (pyramidal), $\mathrm{SO_{2}}$ and $\mathrm{H_{2}S}$ (bent), $\mathrm{CHCl_{3}}$ (unsymmetrical), $\mathrm{SF_{4}}$ (see-saw).
Answer $5$.
⏱ Shortcut Zero dipole needs identical ligands and either no lone pairs, or lone pairs placed symmetrically (AX₂E₃ linear, AX₄E₂ square planar).
🔬 Research–Teaching NexusResearch-tutored · optional, about 60 minutes

Research question. How well do the qualitative VSEPR trends — lone pairs squeeze angles; electronegative central atoms open them; electronegative ligands close them — hold up against measured bond angles across whole families of molecules?

Why it matters. Molecular shape decides how a drug molecule fits the pocket of an enzyme, how refrigerant and anaesthetic gases behave, and how greenhouse gases absorb infrared radiation (a bending vibration of $\mathrm{CO_{2}}$ is what absorbs Earth's heat radiation). Chemists in pharmaceutical and materials laboratories worldwide use quick VSEPR-style reasoning before running expensive quantum-chemical calculations; knowing where the simple model fails is part of using it well.

What to do.

  1. From an open database of experimental molecular geometries (for example the NIST Computational Chemistry Comparison and Benchmark Database, CCCBDB), collect bond angles for the hydrides $\mathrm{XH_{3}}$ (X = N, P, As, Sb), $\mathrm{XH_{2}}$ (X = O, S, Se, Te) and for $\mathrm{NF_{3}}$, $\mathrm{PF_{3}}$, $\mathrm{PCl_{3}}$, $\mathrm{OF_{2}}$, $\mathrm{Cl_{2}O}$.
  2. Plot the bond angle of each hydride family against the Pauling electronegativity of the central atom.
  3. For each central atom, compare the hydride with the halides. Which pairs obey Result 3.9(3) and which do not?
  4. Look up the dipole moments of the same molecules and test whether a larger angle goes with a larger or smaller dipole moment.

Tools: Internet access to an experimental geometry database, a spreadsheet for plots.

Hand in: Two graphs (angle vs electronegativity for each hydride family), a table of hydride/halide comparisons marked "obeys" or "fails", and a paragraph on what the failures have in common.

Going further. $\mathrm{PF_{3}}$ ($97.8^\circ$) has a larger angle than $\mathrm{PH_{3}}$ ($93.3^\circ$), and $\mathrm{Cl_{2}O}$ ($111^\circ$) a larger angle than $\mathrm{H_{2}O}$. Suggest two effects VSEPR leaves out (the size of the outer atoms; changes in hybridisation, Section 3.3) and test which one fits your data.

Instructor note: the hydride trends are clean (NH₃ 107°, PH₃ 93°, AsH₃ 92°, SbH₃ 92°; H₂O 104.5°, H₂S 92°, H₂Se 91°, H₂Te 90°), with angles levelling off near 90° once the central atom stops "hybridising". The ligand-electronegativity rule works for N and O compounds but fails for P, As and S, where the larger central atom and possible π-back-donation from the halogen open the angle — a good opening for discussing the limits of a qualitative model.

🧪 Self-check quiz

0/5 correct

Q1. In the octet Lewis structure of $\mathrm{SO_{2}}$ with one $\mathrm{S{=}O}$ and one $\mathrm{S{-}O}$ bond and a lone pair on sulphur, the formal charge on sulphur is

Q2. Which bond is the most polar?

Q3. Which molecule has a non-zero dipole moment?

Q4. The shape of $\mathrm{ClF_{3}}$ is

Q5. The H–O–H angle in water ($104.5^\circ$) is smaller than the H–C–H angle in methane ($109.5^\circ$) mainly because