Chapter 13 · Purification and Characterisation of Organic Compounds

13.2 Qualitative and Quantitative Analysis

Fusing an organic compound with sodium turns its covalently bound nitrogen, sulphur and halogens into ions that simple colour tests can find. Weighing the $\mathrm{CO_{2}}$, $\mathrm{H_{2}O}$, $\mathrm{N_{2}}$, $\mathrm{NH_{3}}$, $\mathrm{AgX}$ or $\mathrm{BaSO_{4}}$ it gives turns those elements into percentages, and the percentages into empirical and molecular formulae.

A purified compound sits in a vial: a white powder, a colourless oil. What is it? The first two questions an analyst asks are which elements does it contain? and in what proportions? Only then can a formula be written, a structure proposed, and the compound compared with every substance known. Long before modern instruments, chemists answered both questions with test tubes and a good balance — and the same methods are still used to set the protein content printed on a food label and to check the purity of a fertiliser.

The difficulty is that in organic compounds the elements are held by covalent bonds. A chloroalkane gives no precipitate with silver nitrate, because it contains no chloride ions; an amine gives no reaction typical of nitrogen. So every method in this section begins by breaking the molecule apart — by fusing it with sodium, burning it with copper(II) oxide, digesting it in sulphuric acid or oxidising it with fuming nitric acid — so that each element ends up in a simple inorganic form we can recognise or weigh. We first detect the elements (qualitative analysis), then estimate them (quantitative analysis), and finally turn the percentages into empirical and molecular formulae, using the methods of Section 1.2. The same detection tests return as laboratory practice in Section 20.1; here we concentrate on the chemistry behind them and on the calculations.

Detecting carbon and hydrogen; the sodium fusion extract

Carbon and hydrogen are detected together. The compound is mixed with dry copper(II) oxide and heated in a hard-glass tube. Copper(II) oxide is an oxidising agent: it turns the carbon into carbon dioxide and the hydrogen into water, and is itself reduced to copper.

$$\mathrm{C\ (in\ compound) + 2CuO(s) \xrightarrow{\Delta} 2Cu(s) + CO_{2}(g)}$$ $$\mathrm{2H\ (in\ compound) + CuO(s) \xrightarrow{\Delta} Cu(s) + H_{2}O(g)}$$

The gas turns lime water milky, showing carbon; droplets on the cool part of the tube turn white anhydrous copper(II) sulphate blue, showing hydrogen:

$$\mathrm{Ca(OH)_{2}(aq) + CO_{2}(g)\rightarrow CaCO_{3}(s) + H_{2}O(l)}$$ $$\mathrm{CuSO_{4}(s) + 5H_{2}O(l)\rightarrow CuSO_{4}\cdot5H_{2}O(s)}$$

Nitrogen, sulphur, the halogens and phosphorus need a more drastic treatment.

📘 Definition 13.8 — Lassaigne's test and the sodium fusion extract

In Lassaigne's test a little of the organic compound is heated strongly with a small piece of sodium metal in a fusion tube until red hot. Sodium, a powerful reducing agent, breaks the molecule and converts the covalently bound elements into ionic sodium salts:

$$\mathrm{Na + C + N \xrightarrow{\Delta} NaCN}$$ $$\mathrm{2Na + S \xrightarrow{\Delta} Na_{2}S}$$ $$\mathrm{Na + X \xrightarrow{\Delta} NaX}\ \ (\mathrm{X=Cl,\ Br,\ I})$$

The red-hot tube is plunged into distilled water, the mixture is boiled and filtered. The clear, alkaline filtrate — containing $\mathrm{CN^{-}}$, $\mathrm{S^{2-}}$ and $\mathrm{X^{-}}$ ions if the elements were present — is the sodium fusion extract (Lassaigne's extract). If the compound contains both nitrogen and sulphur and too little sodium is used, sodium thiocyanate forms instead:

$$\mathrm{Na + C + N + S \xrightarrow{\Delta} NaSCN}$$

and with excess sodium the thiocyanate is broken down again:

$$\mathrm{NaSCN + 2Na \xrightarrow{\Delta} NaCN + Na_{2}S}$$

Two features of the nitrogen chemistry are easy to miss. First, nitrogen is detected as cyanide, so the compound must also contain carbon: hydrazine ($\mathrm{H_{2}N{-}NH_{2}}$) and hydroxylamine ($\mathrm{NH_{2}OH}$) give no cyanide and fail the test, although they contain nitrogen. Secondly, compounds that release their nitrogen as $\mathrm{N_{2}}$ gas before the sodium can attack — diazonium salts, for instance — also fail. Ionic halides are not needed for the halogen test; the fusion makes them.

compound + Na fuse (red hot) NaCN, Na₂S, NaX (NaSCN if Na is too little) water, boil, filter sodium fusion extract test for N tests for S test for X

Hydrazine, $\mathrm{N_{2}H_{4}}$, gives a negative result in Lassaigne's test for nitrogen. The reason is that

Tests for nitrogen, sulphur, halogens and phosphorus

The sodium fusion extract is divided into portions, each tested for one element. The table summarises the tests; the chemistry of each follows.

📐 Result 13.5 — Tests on the sodium fusion extract
ElementTreatment of the extractPositive result
Nboil with freshly prepared $\mathrm{FeSO_{4}}$ solution, cool, acidify with conc. $\mathrm{H_{2}SO_{4}}$Prussian blue colour or precipitate
N and S together(little sodium) add $\mathrm{FeCl_{3}}$ solutionblood-red colour, $\mathrm{[Fe(SCN)]^{2+}}$
S(i) acidify with ethanoic acid, add lead ethanoate; (ii) add sodium nitroprusside(i) black precipitate of $\mathrm{PbS}$; (ii) violet colour
Cl, Br, Iacidify with $\mathrm{HNO_{3}}$, boil (if N or S present), add $\mathrm{AgNO_{3}}$$\mathrm{AgCl}$ white, soluble in $\mathrm{NH_{3}(aq)}$; $\mathrm{AgBr}$ pale yellow, sparingly soluble; $\mathrm{AgI}$ yellow, insoluble
Pcompound heated with $\mathrm{Na_{2}O_{2}}$; solution boiled with $\mathrm{HNO_{3}}$, ammonium molybdate addedcanary-yellow precipitate of ammonium phosphomolybdate

Nitrogen — Prussian blue. The extract is alkaline (excess sodium gives NaOH), so the added iron(II) first precipitates as hydroxide. Cyanide ions bind iron(II) as the very stable hexacyanidoferrate(II) ion; on boiling in air, part of the iron(II) is oxidised to iron(III). Acidifying dissolves the hydroxides, and iron(III) combines with hexacyanidoferrate(II) to give the intensely coloured mixed-valence solid Prussian blue, iron(III) hexacyanidoferrate(II):

$$\mathrm{6CN^{-}(aq) + Fe^{2+}(aq) \rightarrow [Fe(CN)_{6}]^{4-}(aq)}$$ $$\mathrm{3[Fe(CN)_{6}]^{4-}(aq) + 4Fe^{3+}(aq)}$$ $$\mathrm{\rightarrow Fe_{4}[Fe(CN)_{6}]_{3}\cdot xH_{2}O(s)}$$

In this solid four iron atoms are $+3$ (outside the complex) and three are $+2$ (inside it); the blue colour comes from electron transfer between the two kinds of iron.

Nitrogen and sulphur together — blood red. If the extract contains thiocyanate rather than cyanide, there is no free $\mathrm{CN^{-}}$ for Prussian blue. Iron(III) instead gives the blood-red thiocyanato complex:

$$\mathrm{Fe^{3+}(aq) + SCN^{-}(aq)\rightarrow [Fe(SCN)]^{2+}(aq)}$$

With excess sodium the thiocyanate is decomposed into cyanide and sulphide, and the separate tests for N and S both work.

Sulphur. Sulphide ions give a black precipitate with lead(II) ethanoate in ethanoic acid, $\mathrm{S^{2-}(aq) + Pb^{2+}(aq)\rightarrow PbS(s)}$, and a violet complex with sodium nitroprusside, $\mathrm{Na_{2}[Fe(CN)_{5}NO]}$ (iron is $+2$, the NO ligand counted as $\mathrm{NO^{+}}$):

$$\mathrm{S^{2-}(aq) + [Fe(CN)_{5}NO]^{2-}(aq)}$$ $$\mathrm{\rightarrow [Fe(CN)_{5}NOS]^{4-}(aq)}\ \ (\text{violet})$$

Halogens. Silver ions precipitate the halides, $\mathrm{X^{-}(aq) + Ag^{+}(aq)\rightarrow AgX(s)}$. But silver also precipitates cyanide (white $\mathrm{AgCN}$) and sulphide (black $\mathrm{Ag_{2}S}$), which would give a false result. So if N or S is present the extract is first boiled with dilute nitric acid, which drives these ions off as gases: $\mathrm{NaCN + HNO_{3}\rightarrow NaNO_{3} + HCN\uparrow}$, $\ \mathrm{Na_{2}S + 2HNO_{3}\rightarrow 2NaNO_{3} + H_{2}S\uparrow}$. Nitric acid (not HCl or $\mathrm{H_{2}SO_{4}}$) is used because nitrate does not precipitate silver. The halide is then identified by colour and by its behaviour with ammonia: silver chloride dissolves,

$$\mathrm{AgCl(s) + 2NH_{3}(aq)\rightarrow [Ag(NH_{3})_{2}]^{+}(aq) + Cl^{-}(aq)}$$

silver bromide dissolves only slightly, and silver iodide does not dissolve.

Phosphorus. Phosphorus does not give a useful ion on sodium fusion, so the compound is heated with an oxidising agent, sodium peroxide, which converts it into phosphate:

$$\mathrm{2P + 5Na_{2}O_{2} \xrightarrow{\Delta} 2Na_{3}PO_{4} + 2Na_{2}O}$$

The solution is boiled with nitric acid, which gives phosphoric acid, and ammonium molybdate is added; a canary-yellow precipitate of ammonium phosphomolybdate shows phosphorus:

$$\mathrm{Na_{3}PO_{4} + 3HNO_{3} \rightarrow H_{3}PO_{4} + 3NaNO_{3}}$$ $$\begin{aligned}&\mathrm{H_{3}PO_{4} + 12(NH_{4})_{2}MoO_{4} + 21HNO_{3}}\\ &\quad\rightarrow\mathrm{(NH_{4})_{3}PO_{4}\cdot12MoO_{3}}\\ &\qquad\mathrm{{}+ 21NH_{4}NO_{3} + 12H_{2}O}\end{aligned}$$
✏️ Example 1 — Reading a set of Lassaigne results
A compound $X$ is fused with a small piece of sodium. Its extract (i) gives a blood-red colour with iron(III) chloride, (ii) gives no black precipitate with lead ethanoate, (iii) after boiling with nitric acid, gives a white precipitate with silver nitrate that dissolves in aqueous ammonia. (a) Which elements does $X$ contain? (b) Why is test (ii) negative? (c) What would the nitrogen test with $\mathrm{FeSO_{4}}$ show if the fusion were repeated with excess sodium?
(a) Blood red with $\mathrm{Fe^{3+}}$ means $\mathrm{SCN^{-}}$, so $X$ contains N and S (and carbon). A white precipitate soluble in ammonia is $\mathrm{AgCl}$: $X$ also contains chlorine.
(b) With too little sodium, the sulphur is tied up in thiocyanate; there is little free $\mathrm{S^{2-}}$ to precipitate $\mathrm{PbS}$. The negative result does not mean sulphur is absent.
(c) Excess sodium converts $\mathrm{NaSCN}$ into $\mathrm{NaCN + Na_{2}S}$, so the $\mathrm{FeSO_{4}}$/acid test gives Prussian blue, and lead ethanoate now gives black $\mathrm{PbS}$.
Check Boiling with $\mathrm{HNO_{3}}$ before the silver test was essential here: without it, cyanide or sulphide from the extract could have precipitated with $\mathrm{Ag^{+}}$ and been mistaken for a halide.
✏️ Example 2 — Counting the iron in Prussian blue
(a) How many moles of iron(II) sulphate and of sodium cyanide are needed, in all, to make one mole of $\mathrm{Fe_{4}[Fe(CN)_{6}]_{3}}$ by the reactions above, assuming the $\mathrm{Fe^{3+}}$ comes from aerial oxidation of $\mathrm{FeSO_{4}}$? (b) Show that the formula is electrically neutral. (c) What is the average oxidation number of iron in it?
(a) Three $\mathrm{[Fe(CN)_{6}]^{4-}}$ need $3$ mol $\mathrm{Fe^{2+}}$ and $18$ mol $\mathrm{CN^{-}}$; four $\mathrm{Fe^{3+}}$ come from $4$ mol $\mathrm{Fe^{2+}}$ by oxidation. Total: $7$ mol $\mathrm{FeSO_{4}}$ and $18$ mol $\mathrm{NaCN}$.
(b) $4(+3)+3(-4)=+12-12=0$ ✓.
(c) Inside each complex: $x+6(-1)=-4$, $x=+2$. Average: $\dfrac{4(+3)+3(+2)}{7}=\dfrac{18}{7}=+2.57$.
Check Atoms: $\mathrm{Fe_{4+3}C_{18}N_{18}}$ on both sides of the second equation ✓; charge $-12+12=0$ ✓.

Thiourea, $\mathrm{(NH_{2})_{2}CS}$, contains N and S. It is fused with too little sodium. What do the $\mathrm{FeSO_{4}}$/acid tube and the lead ethanoate tube show?

Choose thiourea and sodium too little. The readout says the extract contains mainly $\mathrm{SCN^{-}}$; tube 1 turns blood red ($\mathrm{[Fe(SCN)]^{2+}}$) and tubes 2 and 3 stay negative because there is no free sulphide. Switch to excess sodium: $\mathrm{SCN^{-}}$ is split into $\mathrm{CN^{-}}$ and $\mathrm{S^{2-}}$, and you see Prussian blue, black $\mathrm{PbS}$ and the violet nitroprusside colour.
Interactive 1 — Lassaigne's Test Bench

Choose a compound, how much sodium is used for the fusion, and whether the extract is boiled with nitric acid before silver nitrate is added. Press Play to add the reagents to the five tubes one after another: (1) $\mathrm{FeSO_{4}}$ then acid — nitrogen; (2) lead ethanoate and (3) sodium nitroprusside — sulphur; (4) $\mathrm{AgNO_{3}}$ — halogens; (5) ammonium molybdate after $\mathrm{Na_{2}O_{2}}$ fusion — phosphorus.

ions in the extract—
nitrogen—
sulphur—
halogen / phosphorus—

Before silver nitrate is added to a sodium fusion extract of a compound containing N and Cl, the extract is boiled with dilute nitric acid. This is done to

Estimating carbon, hydrogen and nitrogen

Quantitative analysis converts a weighed sample completely into products that can be weighed or measured, and works back to the mass of each element. Every calculation has the same shape:

$$\%\ \text{of element}=\frac{\text{mass of element in product}}{\text{mass of sample}}\times100$$
📐 Result 13.6 — Carbon and hydrogen (Liebig's combustion method)

A weighed sample $m$ is burnt completely in a stream of dry oxygen over heated copper(II) oxide: $\mathrm{C_{x}H_{y}}$ (and any O) $+\ \mathrm{O_{2}}\rightarrow x\mathrm{CO_{2}} + \tfrac{y}{2}\mathrm{H_{2}O}$. The gases pass first through a weighed U-tube of anhydrous calcium chloride (absorbs water), then through weighed bulbs of concentrated potassium hydroxide solution (absorbs $\mathrm{CO_{2}}$: $\mathrm{2KOH + CO_{2}\rightarrow K_{2}CO_{3} + H_{2}O}$). From the gains in mass,

$$\%\mathrm{C}=\frac{12}{44}\times\frac{m(\mathrm{CO_{2}})}{m}\times100$$ $$\%\mathrm{H}=\frac{2}{18}\times\frac{m(\mathrm{H_{2}O})}{m}\times100$$

The order matters: KOH solution would also absorb water, so the water absorber comes first.

O₂ → sample CuO heat CaCl₂ takes H₂O KOH(aq) takes CO₂ →
✏️ Example 3 — Carbon and hydrogen from a combustion
$0.264$ g of a compound containing C, H and O gave $0.528$ g of carbon dioxide and $0.216$ g of water on combustion. (a) Find the percentages of C, H and O. (b) Find the empirical formula. (c) Its vapour density is $44$; find the molecular formula.
Find the percentage of carbon first:
(a) $m_{\mathrm{C}}=\tfrac{12}{44}\times0.528=0.144$ g: $\%\mathrm{C}=\tfrac{0.144}{0.264}\times100=54.5\%$. $\ m_{\mathrm{H}}=\tfrac{2}{18}\times0.216=0.024$ g: $\%\mathrm{H}=9.1\%$. $\ \%\mathrm{O}=100-54.5-9.1=36.4\%$ (by difference).
(b) Moles per 100 g: C $54.5/12=4.54$; H $9.1/1=9.1$; O $36.4/16=2.27$. Divide by $2.27$: $2.00:4.0:1$, i.e. $2:4:1$. Empirical formula $\mathrm{C_{2}H_{4}O}$ (formula mass $44$).
(c) $M=2\times44=88\ \mathrm{g\,mol^{-1}}$; $n=88/44=2$: $\mathrm{C_{4}H_{8}O_{2}}$ (for example ethyl ethanoate).
Check $0.264$ g of $\mathrm{C_{4}H_{8}O_{2}}$ is $0.003$ mol, giving $0.012$ mol $\mathrm{CO_{2}}$ ($0.528$ g) and $0.012$ mol $\mathrm{H_{2}O}$ ($0.216$ g) ✓.

Nitrogen can be estimated in two ways. In Dumas' method the nitrogen is set free as $\mathrm{N_{2}}$ gas and its volume measured; in Kjeldahl's method it is converted to ammonia, which is titrated.

📘 Definition 13.9 — Aqueous tension

A gas collected over water (or an aqueous solution) is saturated with water vapour. The partial pressure of that water vapour — the aqueous tension — depends only on the temperature. By Dalton's law the pressure of the dry gas is

$$p_{\text{dry gas}}=P_{\text{atm}}-\text{aqueous tension}.$$
📐 Result 13.7 — Estimating nitrogen

Dumas' method. The weighed sample $m$ is heated with copper(II) oxide in an atmosphere of carbon dioxide: $\mathrm{C}\rightarrow\mathrm{CO_{2}}$, $\mathrm{H}\rightarrow\mathrm{H_{2}O}$ and $\mathrm{N}\rightarrow\mathrm{N_{2}}$,

$$\begin{aligned}&\mathrm{C_{x}H_{y}N_{z} + \left(2x+\tfrac{y}{2}\right)CuO}\\ &\quad\rightarrow\mathrm{xCO_{2} + \tfrac{y}{2}H_{2}O + \tfrac{z}{2}N_{2}}\\ &\qquad\mathrm{{}+ \left(2x+\tfrac{y}{2}\right)Cu}\end{aligned}$$

Any oxides of nitrogen are reduced to $\mathrm{N_{2}}$ over a heated copper gauze. The gases pass into an inverted graduated tube (nitrometer) over concentrated KOH solution, which absorbs $\mathrm{CO_{2}}$; nitrogen collects above it. Its volume is corrected to STP ($273$ K, $760$ mmHg) with $\dfrac{p_{1}V_{1}}{T_{1}}=\dfrac{p_{0}V_{0}}{T_{0}}$, using the dry-gas pressure. Since $22\,400$ mL of $\mathrm{N_{2}}$ at STP weigh $28$ g,

$$\%\mathrm{N}=\frac{28}{22\,400}\times\frac{V_{0}\ (\text{mL at STP})}{m}\times100 .$$

Kjeldahl's method. The sample is heated with concentrated $\mathrm{H_{2}SO_{4}}$ (with $\mathrm{K_{2}SO_{4}}$ to raise the boiling point and $\mathrm{CuSO_{4}}$ as catalyst) until its nitrogen becomes ammonium sulphate. Excess NaOH then liberates ammonia, which is distilled into a known, excess volume of standard acid; the unused acid is titrated with standard alkali:

$$\mathrm{(NH_{4})_{2}SO_{4} + 2NaOH \rightarrow Na_{2}SO_{4} + 2NH_{3} + 2H_{2}O}$$ $$\mathrm{2NH_{3} + H_{2}SO_{4}\rightarrow (NH_{4})_{2}SO_{4}}$$

If $n(\mathrm{NH_{3}})$ is in mol, $\%\mathrm{N}=\dfrac{14\,n(\mathrm{NH_{3}})}{m}\times100$; with $V$ mL of acid of normality $N$ used up by the ammonia,

$$\%\mathrm{N}=\frac{1.4\times N\times V}{m}$$

(for sulphuric acid, $N=2\times$ molarity).

Limitation: Kjeldahl's method does not apply to nitro and azo compounds or to nitrogen in a ring (pyridine, quinoline), because their nitrogen is not converted into ammonium sulphate. Dumas' method works for all nitrogen compounds.

✏️ Example 4 — JEE level: Dumas nitrogen collected over water
$0.300$ g of an organic compound gave $50.0$ mL of nitrogen, collected over water at $300$ K and $715$ mmHg. The aqueous tension at $300$ K is $27$ mmHg. Find the percentage of nitrogen in the compound.
Find the percentage of nitrogen before you open the solution:
Dry pressure $p_{\mathrm{N_{2}}}=715-27=688$ mmHg.
Volume at STP $V_{0}=50.0\times\dfrac{688}{760}\times\dfrac{273}{300}=41.2$ mL.
Mass of N $\dfrac{28}{22\,400}\times41.2=0.0515$ g; $\ \%\mathrm{N}=\dfrac{0.0515}{0.300}\times100=17.2\%$.
Check Forgetting the aqueous tension gives $V_{0}=44.9$ mL and $18.7\%$ — an error of about $9\%$ of the answer, enough to pick the wrong option.
✏️ Example 5 — JEE level: a Kjeldahl back-titration
The ammonia evolved from $0.600$ g of an organic compound by Kjeldahl's method was passed into $50.0$ mL of $0.500$ M $\mathrm{H_{2}SO_{4}}$. The excess acid required $60.0$ mL of $0.500$ M NaOH for neutralisation. (a) Find the percentage of nitrogen. (b) Which of urea ($\mathrm{CH_{4}N_{2}O}$), ethanamide ($\mathrm{C_{2}H_{5}NO}$) and nitrobenzene could the compound be? (c) Why could this method not be used for nitrobenzene?
Find the amount of ammonia, in mmol:
Acid taken $\mathrm{H_{2}SO_{4}}$: $50.0\times0.500=25.0$ mmol, i.e. $50.0$ mmol of $\mathrm{H^{+}}$.
Back-titration NaOH: $60.0\times0.500=30.0$ mmol of $\mathrm{OH^{-}}$ neutralised the excess. So $\mathrm{H^{+}}$ used by ammonia $=50.0-30.0=20.0$ mmol $=n(\mathrm{NH_{3}})$.
(a) Mass of N $=20.0\times10^{-3}\times14=0.280$ g; $\ \%\mathrm{N}=\dfrac{0.280}{0.600}\times100=46.7\%$. (Formula: acid used $=20.0$ mL of $1.00$ N, so $\tfrac{1.4\times1.00\times20.0}{0.600}=46.7$.)
(b), (c) Urea: $\tfrac{28}{60}=46.7\%$ ✓; ethanamide $\tfrac{14}{59}=23.7\%$; nitrobenzene $11.4\%$. The compound could be urea. Nitro nitrogen is not converted into ammonium sulphate by hot sulphuric acid, so Kjeldahl's method fails for nitrobenzene — Dumas' method must be used.

$0.30$ g of ethanamide ($M=59$) is analysed by Kjeldahl's method in the lab below ($50.0$ mL of $0.250$ M $\mathrm{H_{2}SO_{4}}$, back-titration with $0.500$ M NaOH). Roughly what volume of NaOH will the back-titration need?

Choose ethanamide, Kjeldahl, mass $0.30$ g. The readouts show $5.08$ mmol of N (one N per molecule: $0.30/59$ mol), so $25.0-5.08=19.9$ mmol of $\mathrm{H^{+}}$ remain, needing $39.8$ mL of $0.500$ M NaOH; $\%\mathrm{N}$ found $=23.7\%$. A large back-titration volume means little ammonia — try urea ($46.7\%$ N) at the same mass and watch the NaOH volume fall to $30.0$ mL.
Interactive 2 — Nitrogen Estimation Lab

Pick a compound, a method and the mass of sample, and press Play. Kjeldahl: the sample is digested, its ammonia is absorbed in $50.0$ mL of $0.250$ M $\mathrm{H_{2}SO_{4}}$ ($25.0$ mmol $\mathrm{H^{+}}$) and the excess acid is titrated with $0.500$ M NaOH — the bar shows how the acid is shared between ammonia and NaOH. Dumas: the nitrogen is collected as $\mathrm{N_{2}}$ and its volume shown at STP. Compare the %N found with the true value.

0.30 g
measured—
N in sample—
%N found—
%N from formula—

For which compound would Kjeldahl's method give a reliable percentage of nitrogen?

Estimating halogens, sulphur and phosphorus; from analysis to formula

For the remaining elements the sample is oxidised completely, the element is converted into an ion, and the ion is precipitated as an insoluble compound of known formula that is filtered, washed, dried and weighed (gravimetric analysis).

📐 Result 13.8 — Halogens, sulphur and phosphorus

Halogens (Carius method). A weighed sample is heated with fuming nitric acid and silver nitrate in a sealed hard-glass tube (Carius tube) in a furnace. Carbon and hydrogen are oxidised to $\mathrm{CO_{2}}$ and $\mathrm{H_{2}O}$; the halogen forms $\mathrm{AgX}$, which is weighed:

$$\%\mathrm{X}=\frac{A_{r}(\mathrm{X})}{M(\mathrm{AgX})}\times\frac{m(\mathrm{AgX})}{m}\times100$$

with $M=143.5$ for AgCl, $188$ for AgBr and $235$ for AgI.

Sulphur. The sample is heated in a Carius tube with fuming nitric acid (or sodium peroxide); sulphur is oxidised to sulphuric acid, which is precipitated with barium chloride: $\mathrm{H_{2}SO_{4} + BaCl_{2}\rightarrow BaSO_{4} + 2HCl}$.

$$\%\mathrm{S}=\frac{32}{233}\times\frac{m(\mathrm{BaSO_{4}})}{m}\times100 .$$

Phosphorus. The sample is heated with fuming nitric acid; phosphorus becomes phosphoric acid. It is precipitated either as ammonium phosphomolybdate, $\mathrm{(NH_{4})_{3}PO_{4}\cdot12MoO_{3}}$ ($M=1877$), or with magnesia mixture as $\mathrm{MgNH_{4}PO_{4}}$, which on ignition gives magnesium pyrophosphate, $\mathrm{2MgNH_{4}PO_{4}\rightarrow Mg_{2}P_{2}O_{7} + 2NH_{3} + H_{2}O}$ ($M=222$):

$$\%\mathrm{P}=\frac{31}{1877}\times\frac{m(\text{phosphomolybdate})}{m}\times100$$

or

$$\%\mathrm{P}=\frac{62}{222}\times\frac{m(\mathrm{Mg_{2}P_{2}O_{7}})}{m}\times100 .$$

Oxygen is usually found by difference: $\%\mathrm{O}=100-(\text{sum of all the other percentages})$.

Notice the pattern in every factor: (mass of the element in one formula unit of the weighed product) ÷ (molar mass of that product). For magnesium pyrophosphate the factor is $62/222$, not $31/222$, because each $\mathrm{Mg_{2}P_{2}O_{7}}$ contains two phosphorus atoms.

🧭 Problem-solving strategy — From analysis data to molecular formula
  1. Each element separately. Turn each measured product into the mass, then the percentage, of its element (Results 13.6–13.8). Different analyses may use different sample masses — work in percentages.
  2. Oxygen by difference, if the percentages do not add to 100 and oxygen is possible.
  3. Empirical formula. Divide each percentage by the atomic mass, divide by the smallest, and multiply to whole numbers ($1.5\to\times2$, $1.33\to\times3$, $1.25\to\times4$).
  4. Molecular formula. $n=M/(\text{empirical formula mass})$, with $M=2\times$ vapour density if that is given.
  5. Check by recomputing one measured mass from your formula.
✏️ Example 6 — JEE level: a bromo compound from three analyses
An organic compound contains C, H and Br. (i) $0.2350$ g of it, on complete combustion, gave $0.1100$ g of $\mathrm{CO_{2}}$ and $0.0450$ g of $\mathrm{H_{2}O}$. (ii) In a Carius determination, $0.2350$ g gave $0.4700$ g of silver bromide. (iii) Its vapour density is $94$. Find the percentages of C, H and Br, and the empirical and molecular formulae. ($\mathrm{Ag}=108$, $\mathrm{Br}=80$.)
C and H $\%\mathrm{C}=\tfrac{12}{44}\times\tfrac{0.1100}{0.2350}\times100=12.77\%$; $\ \%\mathrm{H}=\tfrac{2}{18}\times\tfrac{0.0450}{0.2350}\times100=2.13\%$.
Br $\%\mathrm{Br}=\tfrac{80}{188}\times\tfrac{0.4700}{0.2350}\times100=85.11\%$. Sum $=12.77+2.13+85.11=100.0\%$: no oxygen.
Empirical Moles per 100 g: C $1.064$, H $2.13$, Br $1.064$; ratio $1:2:1$ — $\mathrm{CH_{2}Br}$, formula mass $94$.
Molecular $M=2\times94=188$; $n=188/94=2$: $\mathrm{C_{2}H_{4}Br_{2}}$ (a dibromoethane).
Check $0.2350$ g of $\mathrm{C_{2}H_{4}Br_{2}}$ is $1.25\times10^{-3}$ mol; it holds $2.50\times10^{-3}$ mol Br, giving $2.50\times10^{-3}\times188=0.4700$ g AgBr ✓.
⚠️ JEE Main traps

1. Colours of the tests. Prussian blue = N; blood red = N and S together (thiocyanate, too little sodium); violet with nitroprusside and black with lead ethanoate = S; canary yellow with molybdate = P. AgCl white and soluble in ammonia, AgBr pale yellow and only slightly soluble, AgI yellow and insoluble.

2. Lassaigne's test needs carbon for nitrogen. Hydrazine, hydroxylamine and other carbon-free nitrogen compounds — and diazonium salts, which lose $\mathrm{N_{2}}$ on heating — do not give Prussian blue.

3. Kjeldahl's limitation. Not for nitro, azo or ring nitrogen (pyridine). In a back-titration, $n(\mathrm{NH_{3}})=n(\mathrm{H^{+}}\ \text{taken})-n(\mathrm{OH^{-}}\ \text{used})$, and one mole of $\mathrm{H_{2}SO_{4}}$ supplies two moles of $\mathrm{H^{+}}$.

4. Dumas corrections. Subtract the aqueous tension before converting to STP, and use $T$ in kelvin. $22\,400$ mL of $\mathrm{N_{2}}$ at STP weighs $28$ g (not $14$).

5. Gravimetric factors. $12/44$ for C, $2/18$ for H, $32/233$ for S, $A_{r}(\mathrm{X})/M(\mathrm{AgX})$ for halogens, $62/222$ for P in $\mathrm{Mg_{2}P_{2}O_{7}}$, $31/1877$ in phosphomolybdate. Oxygen is found by difference, never from the $\mathrm{CO_{2}}$ and $\mathrm{H_{2}O}$.

In a Carius determination, $0.250$ g of an organic compound gives $0.287$ g of silver chloride ($\mathrm{Ag}=108$, $\mathrm{Cl}=35.5$). The percentage of chlorine is

Exercises

Atomic masses: H 1, C 12, N 14, O 16, P 31, S 32, Cl 35.5, Mg 24, Br 80, Mo 96, Ag 108, I 127, Ba 137. STP: $273$ K, $760$ mmHg; $22\,400$ mL of gas per mole.

I
Qualitative analysis.
  • 1 Why must an organic compound be fused with sodium before testing for N, S and halogens? Write the equations for the formation of the three sodium salts.
  • 2 How many iron atoms are there in one formula unit of Prussian blue, and what are their oxidation states?
  • 3 What is the oxidation state of iron in sodium nitroprusside, $\mathrm{Na_{2}[Fe(CN)_{5}NO]}$ (NO counted as $\mathrm{NO^{+}}$)?
  • 4 Why is the sodium fusion extract boiled with nitric acid before the silver nitrate test, and why is HCl not used to acidify it?
  • 5 How would you tell whether a halogen is Cl, Br or I from the silver halide precipitate?
  • 6 Explain why benzenediazonium chloride and hydrazine both fail Lassaigne's test for nitrogen, for different reasons.
  • 7 Calculate the molar mass of ammonium phosphomolybdate, $\mathrm{(NH_{4})_{3}PO_{4}\cdot12MoO_{3}}$.
  • 8 A sodium fusion extract (excess sodium) gives Prussian blue, a violet colour with nitroprusside, and a white precipitate soluble in ammonia with $\mathrm{AgNO_{3}}$ (after boiling with $\mathrm{HNO_{3}}$). The phosphorus test is negative. How many of the elements N, S, Cl, Br, I, P does the compound contain?
1 In the compound these elements are covalently bonded and give no ionic reactions. Fusion with sodium converts them into ions: $\mathrm{Na + C + N\rightarrow NaCN}$, $\mathrm{2Na + S\rightarrow Na_{2}S}$, $\mathrm{Na + X\rightarrow NaX}$.
2 $\mathrm{Fe_{4}[Fe(CN)_{6}]_{3}}$: $4+3=7$ iron atoms — four $\mathrm{Fe(+3)}$ outside and three $\mathrm{Fe(+2)}$ inside the complex ions.
3 $\mathrm{[Fe(CN)_{5}NO]^{2-}}$: $x+5(-1)+(+1)=-2$, so $x=+2$.
4 To expel $\mathrm{CN^{-}}$ and $\mathrm{S^{2-}}$ as HCN and $\mathrm{H_{2}S}$, which would otherwise precipitate $\mathrm{AgCN}$ (white) and $\mathrm{Ag_{2}S}$ (black). HCl would add chloride and give a white AgCl precipitate whatever the compound.
5 White, readily soluble in dilute ammonia → Cl; pale yellow, sparingly soluble → Br; yellow, insoluble → I.
6 The diazonium salt loses its nitrogen as $\mathrm{N_{2}}$ gas on heating before NaCN can form; hydrazine contains no carbon, so cyanide cannot form.
7 $3(18)+31+64+12(96+48)=54+95+1728=1877\ \mathrm{g\,mol^{-1}}$.
8 N (Prussian blue), S (violet), Cl (white AgCl, soluble in NH₃): 3.
II
Carbon, hydrogen and nitrogen (Liebig and Dumas).
  • 1 $0.300$ g of an organic compound gave $0.220$ g of $\mathrm{CO_{2}}$ and $0.180$ g of $\mathrm{H_{2}O}$. Find the percentages of carbon and hydrogen.
  • 2 $0.140$ g of a hydrocarbon gave $0.440$ g of $\mathrm{CO_{2}}$. Find its percentage of carbon and its empirical formula.
  • 3 In Liebig's method, why is the calcium chloride tube placed before the potash bulbs? What would go wrong if they were swapped?
  • 4 In a Dumas determination, $0.250$ g of a compound gave $40.0$ mL of nitrogen at STP. Find the percentage of nitrogen.
  • 5 $0.200$ g of a compound gave $31.2$ mL of moist nitrogen at $300$ K and $758$ mmHg. The aqueous tension at $300$ K is $26$ mmHg. Find the percentage of nitrogen.
  • 6 In Dumas' method, what are the roles of the copper(II) oxide, the heated copper gauze and the potassium hydroxide solution?
  • 7 What volume of nitrogen (in mL at STP) would $0.150$ g of aniline, $\mathrm{C_{6}H_{5}NH_{2}}$, give in a Dumas determination?
  • 8 What mass of $\mathrm{CO_{2}}$ (in g) is formed when $0.184$ g of ethanol, $\mathrm{C_{2}H_{5}OH}$, is burnt completely?
1 $\%\mathrm{C}=\tfrac{12}{44}\times\tfrac{0.220}{0.300}\times100=20.0\%$; $\ \%\mathrm{H}=\tfrac{2}{18}\times\tfrac{0.180}{0.300}\times100=6.67\%$. (These are the values for urea, $\mathrm{CH_{4}N_{2}O}$.)
2 $m_{\mathrm{C}}=\tfrac{12}{44}\times0.440=0.120$ g: $85.7\%$ C, so $14.3\%$ H. Moles: $7.14:14.3=1:2$ → $\mathrm{CH_{2}}$.
3 Concentrated KOH solution absorbs water as well as $\mathrm{CO_{2}}$. If it came first it would take up both, the $\mathrm{CaCl_{2}}$ tube would gain nothing, and %C would come out too high and %H zero.
4 $\tfrac{28}{22\,400}\times40.0=0.0500$ g N; $\ \tfrac{0.0500}{0.250}\times100=20.0\%$.
5 $p=758-26=732$ mmHg; $V_{0}=31.2\times\tfrac{732}{760}\times\tfrac{273}{300}=27.3$ mL; mass $=\tfrac{28}{22\,400}\times27.3=0.0342$ g; $\%\mathrm{N}=17.1\%$.
6 CuO oxidises C to $\mathrm{CO_{2}}$ and H to $\mathrm{H_{2}O}$ (setting N free as $\mathrm{N_{2}}$); hot copper reduces any oxides of nitrogen to $\mathrm{N_{2}}$; KOH solution absorbs the $\mathrm{CO_{2}}$ so that only $\mathrm{N_{2}}$ is measured.
7 $n(\mathrm{N})=\tfrac{0.150}{93}=1.613\times10^{-3}$ mol; $n(\mathrm{N_{2}})=8.06\times10^{-4}$ mol; $V=8.06\times10^{-4}\times22\,400=18.1$ mL.
8 $\tfrac{0.184}{46}=0.00400$ mol ethanol → $0.00800$ mol $\mathrm{CO_{2}}$ $=0.352$ g.
III
Kjeldahl, Carius, sulphur and phosphorus.
  • 1 In a Kjeldahl determination, the ammonia from $0.750$ g of a compound exactly neutralised $30.0$ mL of $0.250$ M $\mathrm{H_{2}SO_{4}}$. Find the percentage of nitrogen.
  • 2 The ammonia from $0.800$ g of a fertiliser was absorbed in $50.0$ mL of $0.500$ M $\mathrm{H_{2}SO_{4}}$; the excess acid needed $60.0$ mL of $0.500$ M NaOH. Find the percentage of nitrogen.
  • 3 For how many of the following can Kjeldahl's method be used: nitrobenzene, pyridine, azobenzene, aniline, urea, glycine, ethanamide?
  • 4 $0.150$ g of an organic compound gave $0.287$ g of silver chloride in a Carius determination. Find the percentage of chlorine.
  • 5 $0.250$ g of a compound gave $0.376$ g of silver bromide. Find the percentage of bromine.
  • 6 $0.160$ g of a compound gave $0.466$ g of barium sulphate. Find the percentage of sulphur.
  • 7 $0.310$ g of an organophosphorus compound gave $0.111$ g of $\mathrm{Mg_{2}P_{2}O_{7}}$. Find the percentage of phosphorus.
  • 8 Why is the Carius method carried out in a sealed tube with fuming nitric acid, and why is silver nitrate put in the tube from the start?
1 $n(\mathrm{H_{2}SO_{4}})=7.50$ mmol, so $n(\mathrm{NH_{3}})=15.0$ mmol; N $=0.210$ g; $\%\mathrm{N}=\tfrac{0.210}{0.750}\times100=28.0\%$. (Or $\tfrac{1.4\times0.500\times30.0}{0.750}=28.0$.)
2 $\mathrm{H^{+}}$ taken $=50.0$ mmol; $\mathrm{OH^{-}}$ used $=30.0$ mmol; $\mathrm{NH_{3}}=20.0$ mmol $=0.280$ g N; $\ \tfrac{0.280}{0.800}\times100=35.0\%$ (ammonium nitrate has $35.0\%$ N).
3 Aniline, urea, glycine and ethanamide: 4. Nitro, ring and azo nitrogen are not converted into ammonium sulphate.
4 $\tfrac{35.5}{143.5}\times\tfrac{0.287}{0.150}\times100=47.3\%$.
5 $\tfrac{80}{188}\times\tfrac{0.376}{0.250}\times100=64.0\%$.
6 $\tfrac{32}{233}\times\tfrac{0.466}{0.160}\times100=40.0\%$.
7 $\tfrac{62}{222}\times\tfrac{0.111}{0.310}\times100=10.0\%$.
8 Fuming nitric acid must oxidise the whole organic framework, which needs a high temperature; sealing the tube keeps the acid and any volatile halogen compounds inside under pressure, so nothing is lost. Silver nitrate traps each halide ion as AgX the moment it forms, so all the halogen ends up in the weighed precipitate.
IV
From analysis to formula.
  • 1 A compound contains $54.5\%$ C, $9.1\%$ H and the rest oxygen; its vapour density is $44$. Find its molar mass and molecular formula.
  • 2 An amine contains $61.0\%$ C, $15.3\%$ H and $23.7\%$ N. Find its empirical formula. How many H atoms does it have if its molar mass is $59\ \mathrm{g\,mol^{-1}}$?
  • 3 $0.236$ g of a compound of C, H, N and O gave $0.352$ g of $\mathrm{CO_{2}}$ and $0.180$ g of $\mathrm{H_{2}O}$. The ammonia from another $0.236$ g (Kjeldahl) exactly neutralised $20.0$ mL of $0.100$ M $\mathrm{H_{2}SO_{4}}$. Find the percentages of C, H, N and O and the empirical formula.
  • 4 $0.198$ g of a compound of C, H and Cl gave $0.176$ g of $\mathrm{CO_{2}}$, $0.072$ g of $\mathrm{H_{2}O}$ and $0.574$ g of AgCl. Its vapour density is $49.5$. Find the molecular formula.
  • 5 A liquid of molar mass $84$ contains $57.1\%$ C, $4.8\%$ H and $38.1\%$ S. Find its molecular formula and the total number of atoms in one molecule.
  • 6 A protein contains $0.32\%$ sulphur by mass. What is its minimum molar mass, assuming each molecule contains at least one sulphur atom?
  • 7 A saturated amine with one nitrogen atom per molecule contains $19.2\%$ nitrogen. Find its molar mass and suggest a molecular formula $\mathrm{C_{n}H_{2n+3}N}$.
  • 8 A compound contains $10.04\%$ C, $0.84\%$ H and $89.12\%$ Cl. Find its empirical formula. Is it the molecular formula too, if $M=119.5$?
1 $M=2\times44=88$. Moles: C $4.54$, H $9.1$, O $2.27$ → $2:4:1$, $\mathrm{C_{2}H_{4}O}$ ($44$); $n=2$: $\mathrm{C_{4}H_{8}O_{2}}$.
2 Moles: C $5.08$, H $15.3$, N $1.69$ → $3.00:9.04:1$: $\mathrm{C_{3}H_{9}N}$ (formula mass $59$), so the molecular formula is the same: 9 H atoms (e.g. propan-1-amine or trimethylamine).
3 $\%\mathrm{C}=\tfrac{12}{44}\times\tfrac{0.352}{0.236}\times100=40.7\%$; $\%\mathrm{H}=\tfrac{2}{18}\times\tfrac{0.180}{0.236}\times100=8.5\%$; $\mathrm{NH_{3}}=2\times2.00=4.00$ mmol, N $=0.0560$ g, $\%\mathrm{N}=23.7\%$; $\%\mathrm{O}=100-40.7-8.5-23.7=27.1\%$. Moles: $3.39:8.5:1.69:1.69$ → $2:5:1:1$, $\mathrm{C_{2}H_{5}NO}$ (ethanamide).
4 $\%\mathrm{C}=24.2$, $\%\mathrm{H}=4.04$, $\%\mathrm{Cl}=\tfrac{35.5}{143.5}\times\tfrac{0.574}{0.198}\times100=71.7$ (sum $100$). Moles $2.02:4.04:2.02$ → $\mathrm{CH_{2}Cl}$ ($49.5$); $M=99$, $n=2$: $\mathrm{C_{2}H_{4}Cl_{2}}$.
5 Moles: C $4.76$, H $4.8$, S $1.19$ → $4:4:1$, $\mathrm{C_{4}H_{4}S}$ ($84$) = molecular formula (thiophene); $4+4+1=9$ atoms.
6 At least $32$ g of S per mole: $0.0032M=32$, $M_{\min}=10\,000\ \mathrm{g\,mol^{-1}}$.
7 $M=\tfrac{14}{0.192}=72.9\approx73$; $14n+17=73$ gives $n=4$: $\mathrm{C_{4}H_{11}N}$ (e.g. butan-1-amine).
8 Moles: C $0.837$, H $0.84$, Cl $2.51$ → $1:1:3$, $\mathrm{CHCl_{3}}$, formula mass $119.5$ — equal to $M$, so it is also the molecular formula (trichloromethane, chloroform).
🎯 Exam corner JEE Main · MCQJEE Main · Numerical

E1. JEE Main · MCQ An organic compound containing nitrogen and sulphur is fused with an insufficient amount of sodium. Its sodium fusion extract gives a blood-red colour with iron(III) chloride. The species responsible for the colour is formed from (A) $\mathrm{CN^{-}}$ (B) $\mathrm{SCN^{-}}$ (C) $\mathrm{S^{2-}}$ (D) $\mathrm{[Fe(CN)_{6}]^{4-}}$

Fusion With little sodium, N and S combine with carbon and sodium as $\mathrm{NaSCN}$.
Colour $\mathrm{Fe^{3+} + SCN^{-}\rightarrow[Fe(SCN)]^{2+}}$, blood red.
Answer (B).
⏱ Shortcut (A) and (D) lead to Prussian blue, (C) to black PbS or violet nitroprusside — only thiocyanate is red.

E2. JEE Main · Numerical In Kjeldahl's method, the ammonia evolved from $0.35$ g of an organic compound exactly neutralised $25$ mL of $0.20$ M $\mathrm{H_{2}SO_{4}}$. Find the percentage of nitrogen in the compound. Give the answer to the nearest integer.

Ammonia $n(\mathrm{H_{2}SO_{4}})=25\times0.20=5.0$ mmol, so $n(\mathrm{NH_{3}})=10.0$ mmol.
Nitrogen Mass $=10.0\times10^{-3}\times14=0.14$ g; $\%\mathrm{N}=\tfrac{0.14}{0.35}\times100=40\%$.
Answer $40$.
⏱ Shortcut $\%\mathrm{N}=\dfrac{1.4\,NV}{m}=\dfrac{1.4\times0.40\times25}{0.35}=40$ (normality $=2\times0.20$).

E3. JEE Main · MCQ Kjeldahl's method cannot be used to estimate nitrogen in (A) aniline (B) ethanamide (C) urea (D) pyridine

Idea Nitrogen in a ring, like nitro and azo nitrogen, is not converted into ammonium sulphate by digestion with sulphuric acid.
Answer (D). Aniline, ethanamide and urea give all their nitrogen as ammonia.

E4. JEE Main · Numerical In a Carius determination, $0.40$ g of an organic compound gave $0.47$ g of silver bromide ($\mathrm{Ag}=108$, $\mathrm{Br}=80$). Find the percentage of bromine in the compound. Give the answer to the nearest integer.

Factor $M(\mathrm{AgBr})=188$; mass of Br $=\tfrac{80}{188}\times0.47=0.20$ g.
Percentage $\tfrac{0.20}{0.40}\times100=50\%$.
Answer $50$.

E5. JEE Main · MCQ $0.30$ g of a gaseous hydrocarbon gives $0.88$ g of $\mathrm{CO_{2}}$ on complete combustion. Its vapour density is $15$. The hydrocarbon is (A) $\mathrm{CH_{4}}$ (B) $\mathrm{C_{2}H_{4}}$ (C) $\mathrm{C_{2}H_{6}}$ (D) $\mathrm{C_{2}H_{2}}$

Carbon $m_{\mathrm{C}}=\tfrac{12}{44}\times0.88=0.24$ g: $80\%$ C, so $20\%$ H.
Formula Moles $6.67:20=1:3$ → $\mathrm{CH_{3}}$ ($15$); $M=2\times15=30$, $n=2$: $\mathrm{C_{2}H_{6}}$.
Answer (C).
⏱ Shortcut $M=30$ alone leaves only ethane among the options ($\mathrm{CH_{4}}$ 16, $\mathrm{C_{2}H_{4}}$ 28, $\mathrm{C_{2}H_{2}}$ 26).

E6. JEE Main · Numerical In a Dumas determination, $0.30$ g of an organic compound gave $56.0$ mL of dry nitrogen measured at STP. Find the percentage of nitrogen in the compound. Give the answer to the nearest integer.

Mass of N₂ $\tfrac{28}{22\,400}\times56.0=0.0700$ g.
Percentage $\tfrac{0.0700}{0.30}\times100=23.3\%$.
Answer $23$.
⏱ Shortcut $\%\mathrm{N}=\dfrac{V_{0}}{8m}$ with $V_{0}$ in mL and $m$ in g (since $\tfrac{28}{22\,400}\times100=\tfrac18$): $\tfrac{56}{8\times0.30}=23.3$.
🔬 Research–Teaching NexusResearch-tutored · optional, about 45 minutes

Research question. How is the "protein" figure on a food label measured — and how can a nitrogen analysis be fooled?

Why it matters. Food regulators in most countries accept Kjeldahl or Dumas nitrogen analysis as the reference method for protein: the nitrogen percentage is multiplied by a conversion factor (6.25 for many foods, since proteins average about 16% N). The method sees nitrogen, not protein, which is why adulteration of milk products with nitrogen-rich non-protein compounds has caused serious public-health crises — and why laboratories now add specific tests.

What to do.

  1. Collect the nutrition labels of five foods (milk powder, lentils, a cereal, an egg product, a protein supplement). Note the protein per 100 g.
  2. Using the factor 6.25, compute the %N each label implies. Then, for a 1.00 g sample, compute the volume of $0.0500$ M $\mathrm{H_{2}SO_{4}}$ the released ammonia would neutralise in a Kjeldahl analysis.
  3. Compute the %N of urea ($\mathrm{CH_{4}N_{2}O}$) and of melamine ($\mathrm{C_{3}H_{6}N_{6}}$). How much "apparent protein" would 1 g of each add to 100 g of a food?
  4. Find out which other conversion factors are used (for example for wheat or for milk) and why they differ from 6.25.

Tools: Food labels, a calculator or spreadsheet, a periodic table.

Hand in: A table of label protein, implied %N and acid volume for each food; the "apparent protein" added by urea and melamine; and a paragraph on what an analyst could add to the method to detect non-protein nitrogen.

Going further. Dumas analysers now dominate food laboratories because they are fast and avoid hot concentrated acid. Which nitrogen compounds in food might Kjeldahl's method miss that Dumas' method would count?

Instructor note: milk powder near 26 g protein per 100 g implies about 4.2% N, i.e. 3.0 mmol of NH₃ from 1 g, neutralising 30 mL of 0.0500 M H₂SO₄. Urea (46.7% N) adds 2.9 g and melamine (66.7% N) 4.2 g of apparent protein per gram added — a striking result for discussion. Nitrates and nitro compounds are counted by Dumas but largely missed by Kjeldahl.

🧪 Self-check quiz

0/5 correct

Q1. The Prussian blue formed in Lassaigne's test for nitrogen is

Q2. In Kjeldahl's method, potassium sulphate is added to the digestion mixture to

Q3. A sodium fusion extract, acidified with nitric acid, gives a yellow precipitate with silver nitrate that does not dissolve in concentrated ammonia. The compound contains

Q4. In the estimation of sulphur, $m$ g of compound gives $w$ g of $\mathrm{BaSO_{4}}$. The percentage of sulphur is

Q5. A violet colour with sodium nitroprusside in Lassaigne's extract shows the presence of