3.4 Molecular Orbital Theory, Metallic and Hydrogen Bonding
Combine atomic orbitals into molecular orbitals that spread over the whole molecule, fill them like atomic orbitals, and read off the bond order, bond length, bond energy and magnetism of $\mathrm{H_{2}}$ to $\mathrm{Ne_{2}}$ and their ions. Then meet the two other kinds of attraction JEE Main asks about: metallic bonding and the hydrogen bond.
Pour liquid oxygen between the poles of a strong magnet and it does something no Lewis structure predicts: it sticks there, bridging the gap like a pale-blue liquid bead. Oxygen is paramagnetic — its molecules carry unpaired electrons — yet the Lewis structure $\mathrm{O{=}O}$, and the valence bond picture built on it, pair every electron. Other puzzles point the same way. The hydrogen molecule-ion $\mathrm{H_{2}^{+}}$ exists with a single bonding electron; $\mathrm{He_{2}}$ does not exist at all; and removing an electron from $\mathrm{O_{2}}$ makes its bond stronger, while removing one from $\mathrm{N_{2}}$ makes its bond weaker.
Molecular orbital theory explains all of these by letting electrons belong to the molecule as a whole. Atomic orbitals combine into molecular orbitals; electrons fill them by the same rules that fill atomic orbitals (Section 2.4); and one number, the bond order, predicts stability, bond length, bond energy and — with the count of unpaired electrons — magnetism. JEE Main asks about these every year, almost always for the homonuclear diatomics of the first two periods and their ions. The section ends with two other kinds of attraction: the metallic bond, which holds the atoms of a metal together, and the hydrogen bond, which gives water its unusual properties and holds the two strands of DNA together.
Molecular orbitals by linear combination of atomic orbitals
In molecular orbital (MO) theory (Hund and Mulliken, 1932):
- Atomic orbitals of comparable energy and matching symmetry on the bonded atoms combine to form molecular orbitals, which extend over the whole molecule (they are polycentric) and are influenced by all the nuclei.
- The number of molecular orbitals formed equals the number of atomic orbitals combined. Two atomic orbitals give one bonding MO (lower in energy) and one antibonding MO (higher in energy).
- Each molecular orbital holds at most two electrons of opposite spin (Pauli principle). Electrons fill the MOs in order of increasing energy (aufbau principle), and degenerate MOs are first singly occupied with parallel spins (Hund's rule).
The shapes and energies of the MOs are found approximately by the linear combination of atomic orbitals (LCAO). For two identical atoms A and B with atomic orbitals $\psi_{A}$ and $\psi_{B}$, the two combinations are
$$\psi_{\text{b}}=\psi_{A}+\psi_{B}\qquad\text{and}\qquad\psi_{\text{a}}=\psi_{A}-\psi_{B}.$$The electron density is the square of the wave function: $\psi_{\text{b}}^{2}=\psi_{A}^{2}+\psi_{B}^{2}+2\psi_{A}\psi_{B}$. The extra term $2\psi_{A}\psi_{B}$ is positive between the nuclei, where both orbitals are large: the two waves reinforce (constructive interference) and pile up charge between the nuclei, which attracts both and holds them together. For $\psi_{\text{a}}^{2}=\psi_{A}^{2}+\psi_{B}^{2}-2\psi_{A}\psi_{B}$ the waves cancel between the nuclei: there is a nodal plane perpendicular to the axis, half-way between them, where the density is zero, and the bare nuclei repel each other.
A bonding molecular orbital ($\sigma$ or $\pi$) is formed by in-phase (additive) combination of atomic orbitals; it has increased electron density between the nuclei and lies below the parent atomic orbitals in energy. An antibonding molecular orbital ($\sigma^{*}$ or $\pi^{*}$) is formed by out-of-phase (subtractive) combination; it has a nodal plane between the nuclei and lies above the parent atomic orbitals. Electrons in bonding MOs strengthen the bond; electrons in antibonding MOs weaken it.
- Comparable energy. $1s$ combines with $1s$, $2s$ with $2s$, $2p$ with $2p$ of the other atom; $1s$ of one atom does not combine appreciably with $2p$ of a second-period atom of the same kind.
- Same symmetry about the molecular axis ($z$). $2p_{z}$ combines with $2p_{z}$ (or $2s$); $2p_{x}$ combines only with $2p_{x}$. $2s$ and $2p_{x}$ give zero net overlap and do not combine.
- Adequate overlap. The greater the overlap, the further the bonding MO is lowered and the antibonding MO raised.
The antibonding MO is raised slightly more than the bonding MO is lowered. So when both are full (as in $\mathrm{He_{2}}$), the net effect is repulsive and no bond forms.
With $z$ as the molecular axis, the second-period atomic orbitals give two kinds of molecular orbital. Combinations of $s$ orbitals, and of $p_{z}$ orbitals end-on, are symmetric about the axis: σ MOs ($\sigma1s$, $\sigma^{*}1s$, $\sigma2s$, $\sigma^{*}2s$, $\sigma2p_{z}$, $\sigma^{*}2p_{z}$). Sideways combinations of $p_{x}$ with $p_{x}$ and $p_{y}$ with $p_{y}$ give π MOs ($\pi2p_{x}$, $\pi2p_{y}$ and $\pi^{*}2p_{x}$, $\pi^{*}2p_{y}$), which have a nodal plane containing the axis; the two π MOs are degenerate (equal in energy), and so are the two π* MOs. Each π* MO also has a second nodal plane between the nuclei.
Take $z$ as the molecular axis of a homonuclear diatomic molecule of the second period. Which pair of atomic orbitals does not combine to form a molecular orbital?
MO energy diagrams, bond order and magnetism
For the homonuclear diatomic molecules of the first two periods the molecular orbitals, in order of increasing energy, are filled from the bottom up. Two orders are found.
(i) For $\mathrm{O_{2}}$, $\mathrm{F_{2}}$, $\mathrm{Ne_{2}}$ (and their ions):
(ii) For $\mathrm{Li_{2}}$, $\mathrm{Be_{2}}$, $\mathrm{B_{2}}$, $\mathrm{C_{2}}$, $\mathrm{N_{2}}$ (and their ions): $\sigma2p_{z}$ lies above the $\pi2p$ pair:
Reason (s–p mixing): in B, C and N the $2s$ and $2p$ orbitals are close in energy, so $\sigma2s$ and $\sigma2p_{z}$ (both σ, same symmetry) interact; $\sigma2s$ is pushed down and $\sigma2p_{z}$ pushed up, above $\pi2p$. From O onwards the $2s$–$2p$ gap is large, mixing is weak and order (i) holds.
The two orders give different configurations only for 10 to 13 electrons (e.g. $\mathrm{B_{2}}$, $\mathrm{C_{2}}$, $\mathrm{B_{2}^{-}}$, $\mathrm{C_{2}^{+}}$, $\mathrm{N_{2}^{2+}}$); for 14 or more electrons, $\sigma2p_{z}$ and both π MOs are full either way. The inner pair $(\sigma1s)^{2}(\sigma^{*}1s)^{2}$ is often written $\mathrm{KK}$.
If $N_{b}$ electrons occupy bonding MOs and $N_{a}$ occupy antibonding MOs, the bond order is
$$\text{B.O.}=\tfrac12\left(N_{b}-N_{a}\right).$$It may be a whole number or a half-integer. For molecules described by a single Lewis structure it agrees with the number of shared pairs (1 for $\mathrm{F_{2}}$, 2 for $\mathrm{O_{2}}$, 3 for $\mathrm{N_{2}}$).
- Stability. B.O. $\gt0$: the molecule (or ion) can exist; B.O. $=0$ ($N_{b}=N_{a}$): no stable molecule ($\mathrm{He_{2}}$, $\mathrm{Be_{2}}$, $\mathrm{Ne_{2}}$).
- Bond enthalpy and bond length. For bonds between the same pair of atoms, the higher the bond order, the greater the bond dissociation enthalpy and the shorter the bond.
- Equal bond orders. Of two species with the same bond order, the one with fewer antibonding electrons is usually the more stable (for example $\mathrm{N_{2}^{+}}$ more than $\mathrm{N_{2}^{-}}$, and $\mathrm{H_{2}^{+}}$ more than $\mathrm{H_{2}^{-}}$).
- Magnetism. Any unpaired electron makes the species paramagnetic (drawn into a magnetic field); if all electrons are paired it is diamagnetic (weakly repelled). The spin-only magnetic moment is $\mu=\sqrt{n(n+2)}\ \mathrm{BM}$ for $n$ unpaired electrons — $2.83\ \mathrm{BM}$ for $\mathrm{O_{2}}$ ($n=2$).
| Molecule | electrons | valence configuration (after KK) | B.O. | unpaired | magnetism | bond length / pm | bond enthalpy / kJ mol⁻¹ |
|---|---|---|---|---|---|---|---|
| $\mathrm{H_{2}}$ | 2 | $(\sigma1s)^{2}$ | 1 | 0 | dia | 74 | 436 |
| $\mathrm{He_{2}}$ | 4 | $(\sigma1s)^{2}(\sigma^{*}1s)^{2}$ | 0 | 0 | — | does not exist | |
| $\mathrm{Li_{2}}$ | 6 | $(\sigma2s)^{2}$ | 1 | 0 | dia | 267 | ≈101 |
| $\mathrm{Be_{2}}$ | 8 | $(\sigma2s)^{2}(\sigma^{*}2s)^{2}$ | 0 | 0 | — | not stable | |
| $\mathrm{B_{2}}$ | 10 | $\ldots(\pi2p_{x})^{1}(\pi2p_{y})^{1}$ | 1 | 2 | para | 159 | ≈290 |
| $\mathrm{C_{2}}$ | 12 | $\ldots(\pi2p_{x})^{2}(\pi2p_{y})^{2}$ | 2 | 0 | dia | 124 | ≈600 |
| $\mathrm{N_{2}}$ | 14 | $\ldots(\pi2p)^{4}(\sigma2p_{z})^{2}$ | 3 | 0 | dia | 110 | 945 |
| $\mathrm{O_{2}}$ | 16 | $\ldots(\sigma2p_{z})^{2}(\pi2p)^{4}(\pi^{*}2p_{x})^{1}(\pi^{*}2p_{y})^{1}$ | 2 | 2 | para | 121 | 498 |
| $\mathrm{F_{2}}$ | 18 | $\ldots(\sigma2p_{z})^{2}(\pi2p)^{4}(\pi^{*}2p)^{4}$ | 1 | 0 | dia | 142 | 159 |
| $\mathrm{Ne_{2}}$ | 20 | all bonding and antibonding MOs full | 0 | 0 | — | does not exist | |
The "…" stands for $(\sigma2s)^{2}(\sigma^{*}2s)^{2}$. Read down the table: bond order rises from $\mathrm{B_{2}}$ to a maximum of 3 at $\mathrm{N_{2}}$ and falls again; the bond enthalpy follows the bond order and the bond length does the opposite. $\mathrm{N_{2}}$, with the shortest and strongest bond, is famously unreactive. In $\mathrm{C_{2}}$ both bonds are π bonds (there is no σ2p electron pair) — something no Lewis structure shows.
$\mathrm{B_{2}}$ has 10 electrons. In Interactive 1, how many unpaired electrons will it show with the automatic (s–p mixed) order, and how many if you force the $\mathrm{O_{2}}$-type order?
Which species has the same bond order as the superoxide ion, $\mathrm{O_{2}^{-}}$?
Metallic bonding
A lump of sodium is held together although sodium atoms have only one valence electron each — far too few to form electron-pair bonds to the eight or twelve neighbours each atom has in the metal. Metals also share properties that neither ionic nor covalent solids have: they conduct electricity and heat in the solid state, they are lustrous, and they can be hammered into sheets (malleable) and drawn into wires (ductile) without shattering.
In a metal each atom releases its valence electrons into a common pool. The solid is a regular lattice of positive kernels (metal ions: the nucleus plus inner electrons) immersed in a "sea" of delocalised valence electrons that move freely through the whole crystal. The metallic bond is the electrostatic attraction between the kernels and this mobile electron sea. It is non-directional, and it holds the whole crystal together rather than linking particular pairs of atoms.
The model explains the typical properties at once. Electrical conductivity: under a potential difference the free electrons drift towards the positive end; as temperature rises the kernels vibrate more and scatter the electrons, so the conductivity of a metal falls on heating. Thermal conductivity: the mobile electrons carry kinetic energy quickly from hot to cold regions. Lustre: the free electrons absorb and re-emit light of almost all visible wavelengths at the surface. Malleability and ductility: when one layer of kernels slides over another, the electron sea simply flows with it and every kernel is still surrounded by electrons — no bonds are broken; in an ionic crystal the same slip brings like charges face to face and the crystal cracks.
Strength of the metallic bond. The bond is stronger (higher melting point, greater hardness) when there are more delocalised electrons per atom and the kernels are smaller. Across period 3, $\mathrm{Na}$ (1 valence electron, m.p. $98\ ^{\circ}\mathrm{C}$) $\lt$ $\mathrm{Mg}$ (2, $650\ ^{\circ}\mathrm{C}$) $\lt$ $\mathrm{Al}$ (3, $660\ ^{\circ}\mathrm{C}$). Down group 1, the kernels grow while the charge stays $+1$, so the bond weakens: Li $181$, Na $98$, K $63$, Rb $39$, Cs $28\ ^{\circ}\mathrm{C}$. Transition metals, whose $(n-1)d$ electrons also take part, have very strong metallic bonding — tungsten melts at $3422\ ^{\circ}\mathrm{C}$ — while mercury, with a filled and tightly held $5d^{10}6s^{2}$ shell, is a liquid at room temperature.
Not in the JEE Main 2026 list (only "elementary" metallic bonding is). Molecular orbital theory explains the electron sea: $N$ atoms in a crystal combine $N$ valence orbitals into $N$ molecular orbitals so closely spaced that they form a continuous band. In sodium the $3s$ band is only half full, so electrons can move into empty levels just above the filled ones with a tiny push — the metal conducts. In an insulator such as diamond the filled band is separated from the next empty band by a large energy gap; in a semiconductor such as silicon the gap is small enough for heat or light to lift some electrons across.
Why does a metal bend when hammered, while a crystal of sodium chloride shatters?
Hydrogen bonding
Water should be a gas at room temperature. Its heavier relatives $\mathrm{H_{2}S}$, $\mathrm{H_{2}Se}$ and $\mathrm{H_{2}Te}$ boil at $-60$, $-41$ and $-2\ ^{\circ}\mathrm{C}$, and following that trend downwards suggests a boiling point near $-90\ ^{\circ}\mathrm{C}$ for $\mathrm{H_{2}O}$. It actually boils at $100\ ^{\circ}\mathrm{C}$. $\mathrm{HF}$ and $\mathrm{NH_{3}}$ are similarly out of line with their groups. The extra attraction responsible is the hydrogen bond.
A hydrogen bond is the attraction between a hydrogen atom covalently bonded to a small, highly electronegative atom X (F, O or N) and a lone pair on another small, highly electronegative atom Y (F, O or N). It is written with a dotted line: $\mathrm{X{-}H\cdots Y}$. The polar $\mathrm{X^{\delta-}{-}H^{\delta+}}$ bond leaves the tiny hydrogen almost a bare proton, which is strongly attracted by the lone pair on $\mathrm{Y^{\delta-}}$.
- Intermolecular hydrogen bonds link different molecules (water, HF, alcohols, carboxylic acids, $\mathrm{NH_{3}}$): they associate the molecules.
- Intramolecular hydrogen bonds form within one molecule when the donor and acceptor groups are close (usually closing a five- or six-membered ring), as in 2-nitrophenol (o-nitrophenol) and 2-hydroxybenzaldehyde (salicylaldehyde).
- Nature. Mainly electrostatic (a strong dipole–dipole attraction) with a small covalent contribution; it is directional, strongest when $\mathrm{X{-}H\cdots Y}$ is close to linear.
- Strength. Typically about $10$–$40\ \mathrm{kJ\,mol^{-1}}$ — much weaker than a covalent bond ($\sim400\ \mathrm{kJ\,mol^{-1}}$) but much stronger than ordinary van der Waals attractions. Order for the same kind of partner: $\mathrm{F{-}H\cdots F}\gt\mathrm{O{-}H\cdots O}\gt\mathrm{N{-}H\cdots N}$, following the electronegativity of X.
- Intermolecular hydrogen bonding raises boiling points, enthalpies of vaporisation, viscosity and surface tension, increases solubility in water (when the solute can hydrogen-bond with water) and can make molecules associate (dimers, chains).
- Intramolecular hydrogen bonding ties up the donor and acceptor inside one molecule, so the molecules associate less with each other and with water: it lowers the boiling point and the solubility in water and makes the compound more volatile.
Water and ice. Each water molecule has two O–H bonds (two donors) and two lone pairs (two acceptors), so it can take part in four hydrogen bonds. In ice every molecule is hydrogen-bonded tetrahedrally to four others, giving an open, cage-like lattice with much empty space; ice ($0.917\ \mathrm{g\,cm^{-3}}$) is therefore less dense than liquid water ($1.000\ \mathrm{g\,cm^{-3}}$ at $4\ ^{\circ}\mathrm{C}$) and floats. On melting, part of the network collapses and the molecules pack closer, so liquid water is densest at $4\ ^{\circ}\mathrm{C}$ — which lets lakes freeze from the top while fish survive below.
Why $\mathrm{H_{2}O}\ (100\ ^{\circ}\mathrm{C})\gt\mathrm{HF}\ (20\ ^{\circ}\mathrm{C})\gt\mathrm{NH_{3}}\ (-33\ ^{\circ}\mathrm{C})$ although $\mathrm{F{-}H\cdots F}$ is the strongest hydrogen bond: the number of hydrogen bonds per molecule is limited by the smaller of (donor H atoms, acceptor lone pairs). Water has 2 and 2, so it averages two hydrogen bonds per molecule; HF has 1 H and 3 lone pairs, and $\mathrm{NH_{3}}$ 3 H and 1 lone pair, so each averages only one — and N–H···N is the weakest of the three.
Other consequences and applications. HF forms zig-zag chains $\mathrm{(HF)}_{n}$ and the very strong $\mathrm{[F{-}H{-}F]^{-}}$ ion (so $\mathrm{KHF_{2}}$ exists, but there is no $\mathrm{KHCl_{2}}$). Ethanoic and benzoic acids exist as hydrogen-bonded dimers in the vapour and in benzene, so their molar masses measured there appear doubled. Ethanol (b.p. $78\ ^{\circ}\mathrm{C}$) boils far above its isomer methoxymethane ($-24\ ^{\circ}\mathrm{C}$), and lower alcohols, amines, sugars and ammonia dissolve readily in water. Glycerol, with three $\mathrm{OH}$ groups per molecule, is very viscous. In biology, hydrogen bonds hold the two strands of DNA together — two between adenine and thymine, three between guanine and cytosine — and stabilise the α-helix and β-sheet of proteins; they are strong enough to keep these structures in shape, yet weak enough to be opened by enzymes during copying.
For each group, extend the trend of the three heavier hydrides back to period 2. Which first-row hydride lies furthest above the extrapolated line?
1. Using the wrong energy order. For $\mathrm{B_{2}}$, $\mathrm{C_{2}}$, $\mathrm{N_{2}}$ and their ions, $\pi2p$ lies below $\sigma2p_{z}$. Getting this wrong does not change the bond order but flips the magnetism of 10–13-electron species: $\mathrm{B_{2}}$ is paramagnetic, $\mathrm{C_{2}}$ diamagnetic.
2. "Same bond order, same stability". $\mathrm{N_{2}^{+}}$ and $\mathrm{N_{2}^{-}}$ both have B.O. 2.5, but $\mathrm{N_{2}^{-}}$ has an extra antibonding electron and is less stable; likewise $\mathrm{H_{2}^{+}}$ beats $\mathrm{H_{2}^{-}}$.
3. Assuming ionisation always weakens a bond. $\mathrm{O_{2}\to O_{2}^{+}}$ and $\mathrm{F_{2}\to F_{2}^{+}}$ remove an antibonding electron: the bond gets stronger and shorter. $\mathrm{N_{2}\to N_{2}^{+}}$ removes a bonding electron: weaker.
4. Expecting HF to boil highest. Strongest hydrogen bond ≠ most hydrogen bonds. Boiling points: $\mathrm{H_{2}O}\gt\mathrm{HF}\gt\mathrm{NH_{3}}$.
5. Mixing up intra- and intermolecular effects. Intramolecular hydrogen bonding (2-nitrophenol, salicylaldehyde) lowers the boiling point and the solubility in water. Hydrogen bonding needs H on F, O or N: $\mathrm{CH_{3}OCH_{3}}$ and $\mathrm{CH_{3}F}$ cannot hydrogen-bond with themselves.
Which compound has the lower boiling point because of intramolecular hydrogen bonding?
Exercises
Use the s–p mixed order for $\mathrm{Li_{2}}$ to $\mathrm{N_{2}}$ and their ions, and the $\mathrm{O_{2}}$-type order for $\mathrm{O_{2}}$ to $\mathrm{Ne_{2}}$. Counts of bonding and antibonding electrons include the $1s$ MOs. $N_{A}=6.022\times10^{23}\ \mathrm{mol^{-1}}$.
- 1 How many molecular orbitals are formed when the $2s$ and three $2p$ orbitals of each of two atoms combine?
- 2 With $z$ as the axis, state which pairs combine and what MOs they give: (a) $2s+2s$; (b) $2p_{z}+2p_{z}$; (c) $2p_{y}+2p_{y}$; (d) $2s+2p_{y}$.
- 3 How many nodal planes does each of these MOs have: $\sigma1s$, $\sigma^{*}1s$, $\pi2p_{x}$, $\pi^{*}2p_{x}$?
- 4 Why does $\mathrm{He_{2}}$ not exist even though it has two bonding electrons?
- 5 Write the LCAO wave functions of the bonding and antibonding MOs of $\mathrm{H_{2}}$ and the electron density of each. What does the term $2\psi_{A}\psi_{B}$ represent?
- 6 Compare σ and π molecular orbitals: where is the electron density, and which has a nodal plane containing the axis?
- 7 How many electrons does $\mathrm{N_{2}}$ have in bonding MOs, and how many in antibonding MOs? Use them to find its bond order.
- 1 Find the bond orders of $\mathrm{Li_{2}}$ and $\mathrm{Be_{2}}$. Which does not exist?
- 2 Write the configurations of $\mathrm{N_{2}^{+}}$ and $\mathrm{N_{2}^{-}}$, find their bond orders, and say which is more stable.
- 3 Give the number of unpaired electrons in $\mathrm{B_{2}}$, $\mathrm{C_{2}}$, $\mathrm{O_{2}}$ and $\mathrm{O_{2}^{+}}$.
- 4 Find the bond order of the acetylide ion, $\mathrm{C_{2}^{2-}}$.
- 5 Arrange $\mathrm{O_{2}^{2-}}$, $\mathrm{O_{2}^{-}}$, $\mathrm{O_{2}}$, $\mathrm{O_{2}^{+}}$ in order of increasing bond dissociation enthalpy.
- 6 Compare $\mathrm{F_{2}}$ and $\mathrm{F_{2}^{+}}$: bond orders, magnetic behaviour and which has the shorter bond.
- 7 Classify as paramagnetic or diamagnetic: $\mathrm{He_{2}^{+}}$, $\mathrm{Li_{2}}$, $\mathrm{Be_{2}^{+}}$, $\mathrm{B_{2}^{2-}}$. Give the bond order of $\mathrm{Be_{2}^{+}}$.
- 8 How many electrons does $\mathrm{O_{2}}$ have in antibonding molecular orbitals altogether?
- 9 Find the spin-only magnetic moment of $\mathrm{O_{2}}$ in BM.
- 1 Use the electron-sea model to explain why metals conduct electricity, and why the conductivity of a metal falls as it is heated.
- 2 Explain why gold can be beaten into very thin sheets while a crystal of potassium chloride shatters when struck.
- 3 Explain the order of melting points $\mathrm{Na}\ (98\ ^{\circ}\mathrm{C})\lt\mathrm{Mg}\ (650\ ^{\circ}\mathrm{C})\lt\mathrm{Al}\ (660\ ^{\circ}\mathrm{C})$.
- 4 Explain why the melting points of the alkali metals fall from lithium to caesium.
- 5 Tungsten melts at $3422\ ^{\circ}\mathrm{C}$, but mercury is a liquid at room temperature. Suggest reasons in terms of metallic bonding.
- 6 Copper has density $8.96\ \mathrm{g\,cm^{-3}}$ and molar mass $63.5\ \mathrm{g\,mol^{-1}}$. Taking one free electron per atom, find the number of free electrons per $\mathrm{cm^{3}}$, in units of $10^{22}$.
- 7 (a) How many moles of delocalised electrons does $5.4\ \mathrm{g}$ of aluminium ($27\ \mathrm{g\,mol^{-1}}$) contain, if each atom gives three? (b) How many delocalised electrons are there in $1.0\ \mathrm{g}$ of magnesium ($24.3\ \mathrm{g\,mol^{-1}}$), in units of $10^{22}$?
- 1 How many of these can form hydrogen bonds between their own molecules: $\mathrm{CH_{3}OH}$, $\mathrm{CH_{3}OCH_{3}}$, $\mathrm{CH_{3}NH_{2}}$, $\mathrm{(CH_{3})_{3}N}$, $\mathrm{HF}$, $\mathrm{CH_{3}F}$, $\mathrm{CH_{3}COOH}$, $\mathrm{CHCl_{3}}$?
- 2 Ethanol and methoxymethane are isomers ($\mathrm{C_{2}H_{6}O}$) boiling at $78\ ^{\circ}\mathrm{C}$ and $-24\ ^{\circ}\mathrm{C}$. Find the difference in boiling points and explain it.
- 3 Ice has density $0.917\ \mathrm{g\,cm^{-3}}$ and water $1.000\ \mathrm{g\,cm^{-3}}$. By what percentage does the volume of a sample of water increase when it freezes? Explain the low density of ice.
- 4 Which is more volatile and which more soluble in water: 2-hydroxybenzaldehyde or 4-hydroxybenzaldehyde? Explain.
- 5 What molar mass would be found for benzoic acid, $\mathrm{C_{6}H_{5}COOH}$ ($122\ \mathrm{g\,mol^{-1}}$), in benzene if it were completely dimerised?
- 6 $\mathrm{KHF_{2}}$ is a known compound, but $\mathrm{KHCl_{2}}$ is not. Explain.
- 7 One strand of a short DNA segment reads $\mathrm{5'{-}AGCTTG{-}3'}$. Pairing A with T and G with C, how many hydrogen bonds hold this segment to its complementary strand?
- 8 Explain why glycerol, $\mathrm{CH_{2}(OH)CH(OH)CH_{2}OH}$, is far more viscous than propan-1-ol.
- 9 Ammonia is extremely soluble in water but phosphine, $\mathrm{PH_{3}}$, is only slightly soluble. Explain.
E1. JEE Main · MCQ Which set contains only paramagnetic species? (A) $\mathrm{O_{2}}$, $\mathrm{O_{2}^{2-}}$, $\mathrm{B_{2}}$ (B) $\mathrm{N_{2}^{+}}$, $\mathrm{O_{2}^{-}}$, $\mathrm{B_{2}}$ (C) $\mathrm{C_{2}}$, $\mathrm{O_{2}}$, $\mathrm{F_{2}^{+}}$ (D) $\mathrm{Li_{2}}$, $\mathrm{O_{2}^{+}}$, $\mathrm{N_{2}^{-}}$
E2. JEE Main · Numerical How many of the following species have a bond order of exactly 2.5? $\mathrm{N_{2}^{+}}$, $\mathrm{N_{2}^{-}}$, $\mathrm{O_{2}^{+}}$, $\mathrm{C_{2}^{-}}$, $\mathrm{O_{2}^{-}}$, $\mathrm{F_{2}^{+}}$, $\mathrm{B_{2}^{+}}$, $\mathrm{N_{2}^{2+}}$. Give the answer to the nearest integer.
E3. JEE Main · MCQ The correct order of increasing O–O bond length is (A) $\mathrm{O_{2}^{+}}\lt\mathrm{O_{2}}\lt\mathrm{O_{2}^{-}}\lt\mathrm{O_{2}^{2-}}$ (B) $\mathrm{O_{2}^{2-}}\lt\mathrm{O_{2}^{-}}\lt\mathrm{O_{2}}\lt\mathrm{O_{2}^{+}}$ (C) $\mathrm{O_{2}}\lt\mathrm{O_{2}^{+}}\lt\mathrm{O_{2}^{-}}\lt\mathrm{O_{2}^{2-}}$ (D) $\mathrm{O_{2}^{+}}\lt\mathrm{O_{2}^{-}}\lt\mathrm{O_{2}}\lt\mathrm{O_{2}^{2-}}$
E4. JEE Main · Numerical Find the total number of electrons present in antibonding molecular orbitals of the peroxide ion, $\mathrm{O_{2}^{2-}}$ (count all antibonding MOs, including $\sigma^{*}1s$). Give the answer to the nearest integer.
E5. JEE Main · MCQ A mixture of 2-nitrophenol and 4-nitrophenol is separated by steam distillation. The correct explanation is that (A) 4-nitrophenol has intramolecular hydrogen bonding and is steam volatile (B) both isomers have only intermolecular hydrogen bonding (C) 2-nitrophenol forms stronger intermolecular hydrogen bonds and is steam volatile (D) 2-nitrophenol has intramolecular hydrogen bonding and is steam volatile
E6. JEE Main · Numerical How many of the following show intramolecular hydrogen bonding? 2-nitrophenol, 4-nitrophenol, 2-hydroxybenzaldehyde, 2-hydroxybenzoic acid (salicylic acid), 1-(2-hydroxyphenyl)ethanone (2-hydroxyacetophenone), phenol, ethanol, 4-hydroxybenzoic acid. Give the answer to the nearest integer.
Research question. How much of the "anomalous" boiling point of water, ammonia and hydrogen fluoride can be put down to hydrogen bonding — and does the answer depend on how you extrapolate?
Why it matters. Hydrogen bonding sets the boiling point of water, and with it the climate of the Earth, the design of cooling systems and steam turbines, and the stability of DNA and proteins used in biotechnology and medicine. Climate models, drug-binding software and refrigerant design all depend on estimating the strength of these interactions from measured data.
What to do.
- Collect boiling points and enthalpies of vaporisation of the hydrides of groups 14–17 from an open data source (for example the NIST Chemistry WebBook).
- Plot both against period, and against molar mass, for each group.
- Extrapolate the heavier hydrides back to period 2 in two ways — a straight line through periods 3–5, and a straight line through periods 4–5 only — and compare the "expected" values for $\mathrm{CH_{4}}$, $\mathrm{NH_{3}}$, $\mathrm{H_{2}O}$ and $\mathrm{HF}$.
- Divide the excess enthalpy of vaporisation by the number of hydrogen bonds broken per molecule (2 for water, 1 for HF and $\mathrm{NH_{3}}$) to estimate the strength of one hydrogen bond in each.
Tools: NIST Chemistry WebBook or a data handbook, a spreadsheet for the plots and fits.
Hand in: The plots, a table of expected and measured values for both extrapolations, your estimated hydrogen-bond strengths, and a short discussion of how sensitive the conclusions are to the extrapolation method.
Going further. Heavy water, $\mathrm{D_{2}O}$, boils at $101.4\ ^{\circ}\mathrm{C}$. Does a slightly stronger deuterium bond fit your numbers? Look up how hydrogen-bond strength is measured directly (infrared shifts of the O–H stretch).
🧪 Self-check quiz
Q1. Which of the following is diamagnetic?
Q2. The bond order of $\mathrm{He_{2}^{+}}$ is
Q3. s–p mixing in the molecular orbitals of second-period diatomics is responsible for
Q4. In the electron-sea model, a metal consists of
Q5. Water boils at a higher temperature than hydrogen fluoride mainly because