Chapter 6 · Equilibrium

6.3 Acids, Bases, Ionisation and pH

Acids and bases are described by three ever-wider definitions — Arrhenius, Brønsted–Lowry and Lewis. In water, how far an acid or base ionises is measured by $K_{a}$ or $K_{b}$, water itself sets $K_{w}=[\mathrm{H^{+}}][\mathrm{OH^{-}}]$, and the pH scale turns all of it into one number you can calculate for strong, weak, polyprotic and very dilute solutions.

Lemon juice, vinegar and car-battery acid are all acids, yet a drop of battery acid burns skin while vinegar goes on salads. Human blood is held between pH 7.35 and 7.45 — a shift of half a unit either way is a medical emergency. Farmers lime acidic soil, dentists worry about the pH in your mouth after a sugary drink, and a swimming-pool engineer adds acid or alkali every day to keep chlorine working. Behind all of these is one question: how many hydrogen ions are there in the solution?

The answer depends on ionic equilibria — equilibria between molecules and the ions they form in water. In Section 6.1 and Section 6.2 we set up the equilibrium constant and learnt how to use it; here we apply exactly the same law to acids, bases and water. We first sort substances into strong and weak electrolytes and meet the three definitions of acids and bases. Then we define the ionisation constants $K_{a}$ and $K_{b}$ and the ionic product of water $K_{w}$, build the pH scale, and calculate the pH of strong and weak acids and bases — including the traps of very dilute solutions and of acids that release more than one proton. Section 6.4 continues with salts, buffers and solubility.

Electrolytes and the three acid–base concepts

Pure water hardly conducts electricity. Dissolve a little sodium chloride and it conducts well; dissolve the same amount of acetic acid and it conducts only weakly; dissolve sugar and nothing changes. Conduction needs mobile ions, so the experiment tells us how far each solute breaks into ions.

📘 Definition 6.8 — Strong and weak electrolytes; degree of ionisation

An electrolyte is a substance whose aqueous solution (or melt) conducts electricity because it contains ions. A strong electrolyte is (practically) completely ionised in dilute aqueous solution — most salts, the strong acids ($\mathrm{HCl}$, $\mathrm{HBr}$, $\mathrm{HI}$, $\mathrm{HNO_{3}}$, $\mathrm{HClO_{4}}$, the first proton of $\mathrm{H_{2}SO_{4}}$) and the strong bases (the hydroxides of group 1 and $\mathrm{Ca(OH)_{2}}$, $\mathrm{Sr(OH)_{2}}$, $\mathrm{Ba(OH)_{2}}$). A weak electrolyte is only partly ionised; its molecules and ions coexist in a dynamic equilibrium — weak acids such as $\mathrm{CH_{3}COOH}$ and $\mathrm{HCN}$, and weak bases such as $\mathrm{NH_{3}}$.

The degree of ionisation $\alpha$ is the fraction of the dissolved electrolyte present as ions at equilibrium: $$\alpha=\frac{\text{amount ionised}}{\text{total amount dissolved}},\qquad 0\le\alpha\le1 .$$ For a strong electrolyte $\alpha\approx1$; for a weak one $\alpha\ll1$ in all but very dilute solutions. Unlike an equilibrium constant, $\alpha$ depends on the concentration.

Note the difference between "strong" and "concentrated". A $10^{-4}\ \mathrm{M}$ solution of hydrochloric acid is dilute but strong (fully ionised); a $5\ \mathrm{M}$ solution of acetic acid is concentrated but weak (about $0.2\%$ ionised).

Arrhenius (1884). The first useful definition tied acids and bases to the ions they release in water.

📘 Definition 6.9 — Arrhenius acids and bases

An Arrhenius acid is a substance that increases the concentration of hydrogen ions in water: $\mathrm{HA(aq)\rightarrow H^{+}(aq)+A^{-}(aq)}$. An Arrhenius base increases the concentration of hydroxide ions: $\mathrm{MOH(aq)\rightarrow M^{+}(aq)+OH^{-}(aq)}$. Neutralisation is then simply $\mathrm{H^{+}(aq)+OH^{-}(aq)\rightarrow H_{2}O(l)}$.

A bare proton is far too small and too strongly charged to exist alone in water; it attaches to a water molecule as the hydronium ion $\mathrm{H_{3}O^{+}}$ (itself further hydrated, e.g. $\mathrm{H_{9}O_{4}^{+}}$). We write $\mathrm{H^{+}(aq)}$ and $\mathrm{H_{3}O^{+}(aq)}$ interchangeably. The Arrhenius picture has two limitations: it works only in water, and it cannot explain why ammonia, which contains no $\mathrm{OH}$ group, is a base, or why sodium carbonate solution is alkaline.

Brønsted and Lowry (1923) shifted attention from the ions released to the proton that is transferred.

📘 Definition 6.10 — Brønsted–Lowry acids and bases; conjugate pairs

A Brønsted–Lowry acid is a proton ($\mathrm{H^{+}}$) donor; a Brønsted–Lowry base is a proton acceptor. Every acid–base reaction is a proton transfer from an acid to a base.

When an acid $\mathrm{HA}$ loses a proton, the species left, $\mathrm{A^{-}}$, can accept a proton back, so it is a base — the conjugate base of $\mathrm{HA}$. Likewise a base $\mathrm{B}$ that accepts a proton becomes its conjugate acid $\mathrm{BH^{+}}$. Two species that differ by exactly one proton form a conjugate acid–base pair: $$\mathrm{HA+B\rightleftharpoons A^{-}+BH^{+}}$$ ($\mathrm{HA/A^{-}}$ and $\mathrm{BH^{+}/B}$ are the two pairs). A species that can act both as a proton donor and a proton acceptor — $\mathrm{H_{2}O}$, $\mathrm{HCO_{3}^{-}}$, $\mathrm{HS^{-}}$, $\mathrm{H_{2}PO_{4}^{-}}$ — is called amphiprotic.

NH3 + H2O ⇌ NH4+ + OH− baseacidconj. acidconj. base conjugate pair NH₄⁺ / NH₃ conjugate pair H₂O / OH⁻
Water is the acid here: it gives a proton to ammonia. With $\mathrm{HCl}$, water is the base. Water is amphiprotic.

The Brønsted–Lowry idea explains ammonia at once — it is a base because it takes a proton from water — and it works in any solvent. But it still needs a proton. In 1923 G. N. Lewis looked one step deeper, at the electron pair that forms the new bond: when $\mathrm{NH_{3}}$ accepts $\mathrm{H^{+}}$, its lone pair becomes the $\mathrm{N{-}H}$ bond.

📘 Definition 6.11 — Lewis acids and bases

A Lewis acid is an electron-pair acceptor; a Lewis base is an electron-pair donor. Their reaction forms a coordinate bond and an adduct: $$\mathrm{BF_{3}+{:}NH_{3}\rightarrow F_{3}B{\leftarrow}NH_{3}}$$

  • Lewis acids: molecules with an incomplete octet ($\mathrm{BF_{3}}$, $\mathrm{AlCl_{3}}$), metal cations ($\mathrm{Fe^{3+}}$, $\mathrm{Co^{3+}}$, $\mathrm{Ag^{+}}$ — they bind ligands), molecules with a multiple bond to an electronegative atom that can accept a pair ($\mathrm{CO_{2}}$, $\mathrm{SO_{3}}$), and of course $\mathrm{H^{+}}$ itself.
  • Lewis bases: species with a lone pair — $\mathrm{NH_{3}}$, $\mathrm{H_{2}O}$, $\mathrm{ROH}$, $\mathrm{OH^{-}}$, $\mathrm{Cl^{-}}$, $\mathrm{CN^{-}}$. Every Brønsted base is a Lewis base.
ConceptAcidBaseScope / limitation
Arrheniusgives $\mathrm{H^{+}}$ in watergives $\mathrm{OH^{-}}$ in wateraqueous only; misses $\mathrm{NH_{3}}$, $\mathrm{Na_{2}CO_{3}}$
Brønsted–Lowryproton donorproton acceptorany solvent; conjugate pairs; needs a proton
Lewiselectron-pair acceptorelectron-pair donorwidest; includes $\mathrm{BF_{3}}$, metal ions; gives no simple scale of strength

Each definition contains the previous one: every Arrhenius acid is a Brønsted acid, and every Brønsted base is a Lewis base. The reverse is false — $\mathrm{BF_{3}}$ is a Lewis acid but has no proton to give, so it is not a Brønsted acid.

✏️ Example 1 — Spotting acids, bases and conjugate pairs
For each reaction, name the acid and the base in the most suitable concept, and give the conjugate pairs where they exist. (a) $\mathrm{HSO_{4}^{-}(aq)+CO_{3}^{2-}(aq)\rightleftharpoons SO_{4}^{2-}(aq)+HCO_{3}^{-}(aq)}$   (b) $\mathrm{AlCl_{3}+Cl^{-}\rightarrow [AlCl_{4}]^{-}}$   (c) $\mathrm{HCO_{3}^{-}(aq)+H_{2}O(l)\rightleftharpoons H_{2}CO_{3}(aq)+OH^{-}(aq)}$. (d) In (a), which side does the equilibrium favour? ($K_{a}$: $\mathrm{HSO_{4}^{-}}$ $1.2\times10^{-2}$, $\mathrm{HCO_{3}^{-}}$ $5.6\times10^{-11}$.)
(a) A proton moves from $\mathrm{HSO_{4}^{-}}$ to $\mathrm{CO_{3}^{2-}}$: $\mathrm{HSO_{4}^{-}}$ is the Brønsted acid, $\mathrm{CO_{3}^{2-}}$ the base. Pairs: $\mathrm{HSO_{4}^{-}/SO_{4}^{2-}}$ and $\mathrm{HCO_{3}^{-}/CO_{3}^{2-}}$. Charge check: $-1-2=-2-1$ ✓.
(b) No proton moves. $\mathrm{Cl^{-}}$ donates a lone pair to the electron-deficient Al (6 valence electrons in $\mathrm{AlCl_{3}}$): $\mathrm{AlCl_{3}}$ is a Lewis acid, $\mathrm{Cl^{-}}$ a Lewis base. There are no conjugate pairs — that is a Brønsted idea.
(c) $\mathrm{H_{2}O}$ gives a proton to $\mathrm{HCO_{3}^{-}}$: here water is the acid and $\mathrm{HCO_{3}^{-}}$ the base. Pairs: $\mathrm{H_{2}CO_{3}/HCO_{3}^{-}}$ and $\mathrm{H_{2}O/OH^{-}}$. In (a) $\mathrm{HCO_{3}^{-}}$ appeared as an acid's conjugate base — it is amphiprotic.
(d) $\mathrm{HSO_{4}^{-}}$ ($K_{a}=1.2\times10^{-2}$) is a far stronger acid than $\mathrm{HCO_{3}^{-}}$ ($5.6\times10^{-11}$). The proton goes to the stronger base and the equilibrium lies on the side of the weaker acid and weaker base — the right. (In fact $K=\tfrac{1.2\times10^{-2}}{5.6\times10^{-11}}\approx2\times10^{8}$.)

Which species is a Lewis acid but not a Brønsted–Lowry acid?

Ionisation constants and the ionisation of water

A weak acid in water sets up an equilibrium, and the law of chemical equilibrium of Section 6.1 applies to it like any other. For acetic acid,

$$\mathrm{CH_{3}COOH(aq)+H_{2}O(l)\rightleftharpoons H_{3}O^{+}(aq)+CH_{3}COO^{-}(aq)} .$$

Water is the solvent; in dilute solution its concentration ($55.5\ \mathrm{mol\,L^{-1}}$) hardly changes, so it is left out of the equilibrium expression (its activity is taken as 1).

📘 Definition 6.12 — Acid and base ionisation constants

For a weak acid $\mathrm{HA(aq)+H_{2}O(l)\rightleftharpoons H_{3}O^{+}(aq)+A^{-}(aq)}$ the acid ionisation (dissociation) constant is

$$K_{a}=\frac{[\mathrm{H_{3}O^{+}}][\mathrm{A^{-}}]}{[\mathrm{HA}]} .$$

For a weak base $\mathrm{B(aq)+H_{2}O(l)\rightleftharpoons BH^{+}(aq)+OH^{-}(aq)}$ the base ionisation constant is

$$K_{b}=\frac{[\mathrm{BH^{+}}][\mathrm{OH^{-}}]}{[\mathrm{B}]} .$$

All concentrations are equilibrium values in $\mathrm{mol\,L^{-1}}$. We define $\mathrm{p}K_{a}=-\log K_{a}$ and $\mathrm{p}K_{b}=-\log K_{b}$. The larger $K_{a}$ (the smaller $\mathrm{p}K_{a}$), the stronger the acid. Like every equilibrium constant, $K_{a}$ and $K_{b}$ depend only on temperature — not on concentration.

Weak acid$K_{a}$ (298 K)$\mathrm{p}K_{a}$Weak base$K_{b}$ (298 K)$\mathrm{p}K_{b}$
hydrofluoric, $\mathrm{HF}$$6.8\times10^{-4}$3.17dimethylamine, $\mathrm{(CH_{3})_{2}NH}$$5.4\times10^{-4}$3.27
nitrous, $\mathrm{HNO_{2}}$$4.5\times10^{-4}$3.35ammonia, $\mathrm{NH_{3}}$$1.8\times10^{-5}$4.74
methanoic (formic), $\mathrm{HCOOH}$$1.8\times10^{-4}$3.74aniline, $\mathrm{C_{6}H_{5}NH_{2}}$$4.3\times10^{-10}$9.37
benzoic, $\mathrm{C_{6}H_{5}COOH}$$6.5\times10^{-5}$4.19
ethanoic (acetic), $\mathrm{CH_{3}COOH}$$1.8\times10^{-5}$4.74
hypochlorous, $\mathrm{HOCl}$$3.0\times10^{-8}$7.52
hydrocyanic, $\mathrm{HCN}$$4.9\times10^{-10}$9.31
phenol, $\mathrm{C_{6}H_{5}OH}$$1.3\times10^{-10}$9.89

These are the values used throughout this section unless a problem gives its own.

Water ionises too. Even the purest water conducts very slightly, because a tiny fraction of its molecules transfer protons to one another — water acts as acid and base at once (self-ionisation or autoprotolysis):

$$\mathrm{H_{2}O(l)+H_{2}O(l)\rightleftharpoons H_{3}O^{+}(aq)+OH^{-}(aq)} .$$
📘 Definition 6.13 — Ionic product of water

In pure water and in every aqueous solution, the concentrations of hydrogen and hydroxide ions are linked by the ionic product of water

$$K_{w}=[\mathrm{H_{3}O^{+}}][\mathrm{OH^{-}}]=1.0\times10^{-14}\quad\text{at }298\ \mathrm{K}.$$

In pure water $[\mathrm{H_{3}O^{+}}]=[\mathrm{OH^{-}}]=\sqrt{K_{w}}=1.0\times10^{-7}\ \mathrm{mol\,L^{-1}}$ at 298 K. A solution is neutral when $[\mathrm{H^{+}}]=[\mathrm{OH^{-}}]$, acidic when $[\mathrm{H^{+}}]\gt[\mathrm{OH^{-}}]$ and basic when $[\mathrm{H^{+}}]\lt[\mathrm{OH^{-}}]$. Self-ionisation is endothermic (about $+57\ \mathrm{kJ\,mol^{-1}}$, the reverse of neutralisation), so $K_{w}$ increases with temperature.

$T$ / K273298310323373
$K_{w}$$1.1\times10^{-15}$$1.0\times10^{-14}$$2.4\times10^{-14}$$5.5\times10^{-14}$$5.1\times10^{-13}$
pH of pure water7.487.006.816.636.15

A conjugate pair shares one constant. Write the ionisation of $\mathrm{HA}$ and the reaction of its conjugate base $\mathrm{A^{-}}$ with water:

$$\mathrm{HA+H_{2}O\rightleftharpoons H_{3}O^{+}+A^{-}}\qquad K_{a},$$ $$\mathrm{A^{-}+H_{2}O\rightleftharpoons HA+OH^{-}}\qquad K_{b}.$$

Adding the two equations gives $\mathrm{2H_{2}O\rightleftharpoons H_{3}O^{+}+OH^{-}}$, and when equations are added their constants multiply:

📐 Result 6.16 — $K_{a}K_{b}=K_{w}$ for a conjugate pair

For any conjugate acid–base pair in water at a given temperature,

$$K_{a}(\mathrm{HA})\times K_{b}(\mathrm{A^{-}})=K_{w},$$ $$\mathrm{p}K_{a}+\mathrm{p}K_{b}=\mathrm{p}K_{w}=14.00\ \text{at }298\ \mathrm{K}.$$

Consequences: the stronger an acid, the weaker its conjugate base, and vice versa. The conjugate base of a strong acid ($\mathrm{Cl^{-}}$, $\mathrm{NO_{3}^{-}}$, $\mathrm{ClO_{4}^{-}}$) has negligible basic strength; the conjugate base of a very weak acid ($\mathrm{CN^{-}}$, $\mathrm{C_{6}H_{5}O^{-}}$) is a noticeable base. An acid–base equilibrium lies on the side of the weaker acid and the weaker base.

What makes an acid strong? To give up $\mathrm{H^{+}}$ the $\mathrm{H{-}X}$ bond must break heterolytically and the anion $\mathrm{X^{-}}$ must be stable.

The levelling effect of water. $\mathrm{HClO_{4}}$, $\mathrm{HI}$, $\mathrm{HBr}$, $\mathrm{HCl}$ and $\mathrm{HNO_{3}}$ all appear equally strong in water: each gives its proton completely to $\mathrm{H_{2}O}$, and the strongest acid that can exist in water is $\mathrm{H_{3}O^{+}}$. Their differences show up only in a less basic solvent such as pure acetic acid.

✏️ Example 2 — $K_{a}$ from a pH measurement
A $0.10\ \mathrm{M}$ solution of a weak monobasic acid HA has pH $2.87$ at 298 K. (a) Find $[\mathrm{H^{+}}]$ and the degree of ionisation $\alpha$. (b) Find $K_{a}$ and $\mathrm{p}K_{a}$ and identify the acid from the table. (c) Find $K_{b}$ of its conjugate base. (d) What is $[\mathrm{OH^{-}}]$ in the solution?
Find $K_{a}$ before you open the solution:
(a) $[\mathrm{H^{+}}]=10^{-2.87}=1.35\times10^{-3}\ \mathrm{M}$. Each ionised HA gives one $\mathrm{H^{+}}$ and one $\mathrm{A^{-}}$ (water's share is negligible here), so $\alpha=\dfrac{1.35\times10^{-3}}{0.10}=0.0135$, i.e. $1.35\%$.
(b) $K_{a}=\dfrac{(1.35\times10^{-3})^{2}}{0.10-0.00135}=1.84\times10^{-5}$, $\mathrm{p}K_{a}=4.73$ — acetic acid ($1.8\times10^{-5}$) within the precision of the pH reading.
(c) $K_{b}(\mathrm{CH_{3}COO^{-}})=\dfrac{K_{w}}{K_{a}}=\dfrac{1.0\times10^{-14}}{1.8\times10^{-5}}=5.6\times10^{-10}$ — a very weak base.
(d) $[\mathrm{OH^{-}}]=\dfrac{K_{w}}{[\mathrm{H^{+}}]}=\dfrac{1.0\times10^{-14}}{1.35\times10^{-3}}=7.4\times10^{-12}\ \mathrm{M}$. Hydroxide ions are still present in an acidic solution — just very few.
Check $\alpha\ll1$, so the shortcut $K_{a}\approx c\alpha^{2}=0.10\times(0.0135)^{2}=1.82\times10^{-5}$ agrees to $1\%$.

$\mathrm{p}K_{a}$ of $\mathrm{HCN}$ is $9.31$ and that of $\mathrm{HF}$ is $3.17$ at 298 K. Which statement is correct?

The pH scale; strong and weak acids and bases

Hydrogen-ion concentrations in water range from about $1\ \mathrm{M}$ down to $10^{-14}\ \mathrm{M}$. In 1909 the Danish chemist S. P. L. Sørensen proposed a logarithmic scale that turns this range into the convenient numbers 0 to 14.

📘 Definition 6.14 — pH, pOH and p$K_{w}$
$$\mathrm{pH}=-\log[\mathrm{H^{+}}],\qquad \mathrm{pOH}=-\log[\mathrm{OH^{-}}],\qquad \mathrm{p}K_{w}=-\log K_{w},$$

with concentrations in $\mathrm{mol\,L^{-1}}$ (strictly, pH uses the activity of $\mathrm{H^{+}}$, which equals its molar concentration in dilute solution). Taking logarithms of $K_{w}=[\mathrm{H^{+}}][\mathrm{OH^{-}}]$:

$$\mathrm{pH}+\mathrm{pOH}=\mathrm{p}K_{w}=14.00\ \text{at }298\ \mathrm{K}.$$

At 298 K: neutral pH $=7$, acidic pH $\lt7$, basic pH $\gt7$. At other temperatures neutral pH $=\tfrac12\mathrm{p}K_{w}$, which is not 7.

Because the scale is logarithmic, one pH unit is a factor of 10 in $[\mathrm{H^{+}}]$: rain at pH 4 has ten times the hydrogen-ion concentration of rain at pH 5. A pH change of $0.30$ is a factor of 2 ($\log2=0.301$).

Strong acids and bases. A strong acid is completely ionised, so $[\mathrm{H^{+}}]$ comes straight from the stoichiometry. The water's own contribution ($\le10^{-7}\ \mathrm{M}$, and suppressed further by the acid) can be ignored as long as the acid supplies much more than $10^{-7}\ \mathrm{M}$. For very dilute solutions this fails, and the water must be counted.

📐 Result 6.17 — pH of strong acids and bases, including very dilute solutions
  • Strong acid releasing $n$ protons per formula, concentration $c$ (with $c\gg10^{-6}\ \mathrm{M}$): $[\mathrm{H^{+}}]=nc$, $\mathrm{pH}=-\log(nc)$. Example: $\mathrm{HCl}$ ($n=1$).
  • Strong base giving $n$ hydroxide ions per formula: $[\mathrm{OH^{-}}]=nc$, $\mathrm{pH}=14-\mathrm{pOH}$ at 298 K. Example: $\mathrm{Ba(OH)_{2}}$ ($n=2$).
  • Very dilute strong acid ($c\lesssim10^{-6}\ \mathrm{M}$): charge balance $[\mathrm{H^{+}}]=c+[\mathrm{OH^{-}}]=c+\dfrac{K_{w}}{[\mathrm{H^{+}}]}$ gives $$[\mathrm{H^{+}}]=\frac{c}{2}+\sqrt{\frac{c^{2}}{4}+K_{w}} .$$ The same formula gives $[\mathrm{OH^{-}}]$ for a very dilute strong base. An acid can never make water basic: as $c\to0$, $\mathrm{pH}\to7$ from below.

For example, $1.0\times10^{-8}\ \mathrm{M}$ HCl does not have pH 8 — that would be basic. The acid's $10^{-8}\ \mathrm{M}$ of $\mathrm{H^{+}}$ is small beside water's $10^{-7}\ \mathrm{M}$, and the true pH is just below 7.

✏️ Example 3 — Strong acids, from concentrated to very dilute
Find the pH at 298 K of (a) $0.020\ \mathrm{M}$ $\mathrm{HNO_{3}}$; (b) $0.0050\ \mathrm{M}$ $\mathrm{Ba(OH)_{2}}$; (c) $1.0\times10^{-8}\ \mathrm{M}$ HCl; (d) $1.0\times10^{-7}\ \mathrm{M}$ HCl. (e) In (c), what fraction of the $\mathrm{H^{+}}$ comes from the acid?
Find the pH in (c) first:
(a) $[\mathrm{H^{+}}]=0.020\ \mathrm{M}$; $\mathrm{pH}=-\log(2.0\times10^{-2})=2-0.30=1.70$.
(b) $[\mathrm{OH^{-}}]=2\times0.0050=0.010\ \mathrm{M}$; $\mathrm{pOH}=2.00$; $\mathrm{pH}=12.00$.
(c) $[\mathrm{H^{+}}]=0.5\times10^{-8}+\sqrt{0.25\times10^{-16}+1.0\times10^{-14}}=0.05\times10^{-7}+1.0012\times10^{-7}=1.05\times10^{-7}\ \mathrm{M}$; $\mathrm{pH}=6.98$.
(d) $[\mathrm{H^{+}}]=0.5\times10^{-7}+\sqrt{0.25\times10^{-14}+1.0\times10^{-14}}=(0.5+1.118)\times10^{-7}=1.62\times10^{-7}\ \mathrm{M}$; $\mathrm{pH}=6.79$ — not 7.00, because the acid's protons are comparable with water's.
(e) The acid gives $1.0\times10^{-8}$ of the $1.05\times10^{-7}\ \mathrm{M}$: about $9.5\%$. The rest comes from water, whose own ionisation is slightly suppressed ($[\mathrm{OH^{-}}]=9.5\times10^{-8}\ \mathrm{M}$, below $10^{-7}$).

Weak acids and Ostwald's dilution law. Let a weak acid HA of concentration $c$ ionise to the extent $\alpha$:

$\mathrm{HA}$$\mathrm{H^{+}}$$\mathrm{A^{-}}$
initial / M$c$$0$$0$
equilibrium / M$c(1-\alpha)$$c\alpha$$c\alpha$
📐 Law 6.18 — Ostwald's dilution law

For a weak binary electrolyte (a weak monobasic acid, a weak monoacidic base) of concentration $c$ and degree of ionisation $\alpha$, with water's own ions negligible,

$$K_{a}=\frac{(c\alpha)(c\alpha)}{c(1-\alpha)}=\frac{c\alpha^{2}}{1-\alpha} .$$

When $\alpha\ll1$ (in practice $\alpha\lt0.05$, i.e. $c/K_{a}\gtrsim400$), $1-\alpha\approx1$ and

$$\alpha\approx\sqrt{\frac{K_{a}}{c}} .$$

So $\alpha$ grows as the solution is diluted: a weak electrolyte becomes more ionised the more dilute it is, approaching $\alpha=1$ at infinite dilution. Diluting 100 times multiplies $\alpha$ by about 10. If $\alpha$ is not small, solve the quadratic $c\alpha^{2}+K_{a}\alpha-K_{a}=0$ exactly.

Ostwald's law reflects Le Chatelier's principle: dilution lowers all concentrations, and the equilibrium $\mathrm{HA\rightleftharpoons H^{+}+A^{-}}$ shifts to the side with more dissolved particles. But although $\alpha$ rises, $[\mathrm{H^{+}}]=c\alpha\approx\sqrt{K_{a}c}$ still falls on dilution, only more slowly than for a strong acid.

📐 Result 6.19 — pH of a weak acid or a weak base

For a weak acid with $\alpha\ll1$ and $c\gg10^{-6}\ \mathrm{M}$:

$$[\mathrm{H^{+}}]=c\alpha\approx\sqrt{K_{a}c},\qquad \mathrm{pH}\approx\tfrac12\left(\mathrm{p}K_{a}-\log c\right).$$

For a weak base: $[\mathrm{OH^{-}}]\approx\sqrt{K_{b}c}$, $\mathrm{pOH}\approx\tfrac12(\mathrm{p}K_{b}-\log c)$, $\mathrm{pH}=14-\mathrm{pOH}$ at 298 K.

Exactly (water still negligible): $[\mathrm{H^{+}}]=\dfrac{-K_{a}+\sqrt{K_{a}^{2}+4K_{a}c}}{2}$. A tenfold dilution raises the pH of a weak acid by about $0.5$, of a strong acid by $1$.

🧭 Problem-solving strategy — Finding the pH of a solution
  1. Classify every solute: strong acid / strong base / weak acid / weak base (salts come in Section 6.4). If strong acids and bases are mixed, first neutralise in millimoles and find what is left over, then divide by the total volume.
  2. Strong only: $[\mathrm{H^{+}}]$ or $[\mathrm{OH^{-}}]$ from stoichiometry. If it comes out below about $10^{-6}\ \mathrm{M}$, use Result 6.17 for very dilute solutions.
  3. Weak: write $K_{a}$ (or $K_{b}$) with an ICE table; try $\sqrt{Kc}$; check $\alpha\lt5\%$. If not, solve the quadratic.
  4. Convert: $\mathrm{pH}=-\log[\mathrm{H^{+}}]$, or $\mathrm{pH}=14-\mathrm{pOH}$ at 298 K (use $\mathrm{p}K_{w}$ at other temperatures).
  5. Sanity check: an acid gives pH $\lt7$, a base pH $\gt7$; a weak acid is less acidic than a strong one of the same concentration.
✏️ Example 4 — Diluting acetic acid: when the shortcut fails
Acetic acid has $K_{a}=1.8\times10^{-5}$ at 298 K. (a) Find $\alpha$ and pH for a $0.10\ \mathrm{M}$ solution. (b) The solution is diluted 100 times to $1.0\times10^{-3}\ \mathrm{M}$. Find $\alpha$ and pH with the approximation, and then exactly. (c) Compare with diluting $0.10\ \mathrm{M}$ HCl 100 times.
(a) $\alpha\approx\sqrt{\dfrac{1.8\times10^{-5}}{0.10}}=0.0134$ ($1.3\%$, small ✓). $[\mathrm{H^{+}}]=c\alpha=1.34\times10^{-3}\ \mathrm{M}$, $\mathrm{pH}=2.87$ [or $\tfrac12(4.74+1.00)=2.87$].
(b) shortcut $\alpha\approx\sqrt{\dfrac{1.8\times10^{-5}}{1.0\times10^{-3}}}=0.134$ — $13\%$, no longer small. $\mathrm{pH}\approx\tfrac12(4.74+3.00)=3.87$.
(b) exact $(1.0\times10^{-3})\alpha^{2}+1.8\times10^{-5}\alpha-1.8\times10^{-5}=0$: $\alpha=\dfrac{-1.8\times10^{-5}+\sqrt{3.24\times10^{-10}+7.2\times10^{-8}}}{2.0\times10^{-3}}=0.125$. $[\mathrm{H^{+}}]=1.25\times10^{-4}\ \mathrm{M}$, $\mathrm{pH}=3.90$.
(c) HCl: pH goes from $1.00$ to $3.00$ — up by 2. Acetic acid: from $2.87$ to $3.90$ — up by about 1, because $\alpha$ rose almost tenfold and partly made up for the dilution.
Check $K_{a}=\dfrac{c\alpha^{2}}{1-\alpha}=\dfrac{10^{-3}(0.125)^{2}}{0.875}=1.8\times10^{-5}$ ✓. The shortcut was off by only $0.03$ pH, but in $\alpha$ it was off by $7\%$ — JEE answers that ask for $\alpha$ notice.

In the dilution lab, keep $\mathrm{p}K_{a}=4.74$ (acetic acid). Start at $\log c=-1$ ($0.10\ \mathrm{M}$) and slide to $\log c=-3$ — a 100-fold dilution. By roughly how much does the pH of the weak acid rise?

At $\log c=-1$ the readouts show $\alpha=1.34\%$ and exact pH $2.87$; at $\log c=-3$, $\alpha=12.6\%$ and exact pH $3.90$ (Ostwald shortcut $3.87$). The rise is $1.03$ — about half the rise of 2 for the strong acid (blue curve), because $[\mathrm{H^{+}}]\approx\sqrt{K_{a}c}$ depends on $\sqrt{c}$. Keep sliding: below $\log c\approx-5$ the acid is almost fully ionised and the red curve joins the blue one, and below $\log c\approx-7$ both bend over to pH 7 — water itself takes over.
Interactive 1 — Dilution Lab: Weak Acid versus Strong Acid

Choose the $\mathrm{p}K_{a}$ of a weak monobasic acid and its concentration $c$ (as $\log c$). The red curve is the exact pH of the weak acid (water's ions included), the dashed red line Ostwald's shortcut $\tfrac12(\mathrm{p}K_{a}-\log c)$, and the blue curve a strong acid of the same concentration. The box on the right shows 25 acid molecules: how many have ionised into $\mathrm{H^{+}}$ (red) and $\mathrm{A^{-}}$ (blue). Press Play to dilute step by step.

4.74−1.0
concentration $c$—
degree of ionisation $\alpha$—
pH (exact)—
pH (Ostwald shortcut)—
✏️ Example 5 — A weak base and its conjugate acid
For a $0.20\ \mathrm{M}$ aqueous ammonia solution at 298 K ($K_{b}=1.8\times10^{-5}$) find (a) $[\mathrm{OH^{-}}]$ and $\alpha$, (b) pH, (c) $K_{a}$ of $\mathrm{NH_{4}^{+}}$. (d) A $0.20\ \mathrm{M}$ NaOH solution is diluted until its pH equals that of the ammonia solution. By what factor was it diluted?
(a) $\mathrm{NH_{3}(aq)+H_{2}O(l)\rightleftharpoons NH_{4}^{+}(aq)+OH^{-}(aq)}$. $[\mathrm{OH^{-}}]\approx\sqrt{K_{b}c}=\sqrt{1.8\times10^{-5}\times0.20}=1.90\times10^{-3}\ \mathrm{M}$; $\alpha=\dfrac{1.90\times10^{-3}}{0.20}=0.95\%$ (small ✓).
(b) $\mathrm{pOH}=2.72$, so $\mathrm{pH}=14.00-2.72=11.28$.
(c) $K_{a}(\mathrm{NH_{4}^{+}})=\dfrac{K_{w}}{K_{b}}=\dfrac{1.0\times10^{-14}}{1.8\times10^{-5}}=5.6\times10^{-10}$ ($\mathrm{p}K_{a}=9.26$) — a weak acid, as weak as HCN.
(d) The NaOH must have $[\mathrm{OH^{-}}]=1.90\times10^{-3}\ \mathrm{M}$: factor $=\dfrac{0.20}{1.90\times10^{-3}}=105$. Only about one ammonia molecule in a hundred has reacted with water.

A $0.01\ \mathrm{M}$ solution of a weak acid ($K_{a}=1.0\times10^{-6}$) is diluted to $0.0001\ \mathrm{M}$. Using Ostwald's dilution law, its degree of ionisation

Polyprotic acids and multistage ionisation

Some acids carry more than one ionisable hydrogen: $\mathrm{H_{2}S}$, $\mathrm{H_{2}CO_{3}}$, oxalic acid $\mathrm{H_{2}C_{2}O_{4}}$ (diprotic), $\mathrm{H_{3}PO_{4}}$ (triprotic). They do not lose all their protons at once but in stages, each with its own equilibrium and its own constant:

$$\mathrm{H_{2}S(aq)\rightleftharpoons H^{+}(aq)+HS^{-}(aq)}\qquad K_{a1}=\frac{[\mathrm{H^{+}}][\mathrm{HS^{-}}]}{[\mathrm{H_{2}S}]},$$ $$\mathrm{HS^{-}(aq)\rightleftharpoons H^{+}(aq)+S^{2-}(aq)}\qquad K_{a2}=\frac{[\mathrm{H^{+}}][\mathrm{S^{2-}}]}{[\mathrm{HS^{-}}]}.$$

Adding the steps, $\mathrm{H_{2}S\rightleftharpoons 2H^{+}+S^{2-}}$ has the overall constant $K=K_{a1}K_{a2}=\dfrac{[\mathrm{H^{+}}]^{2}[\mathrm{S^{2-}}]}{[\mathrm{H_{2}S}]}$.

Acid$K_{a1}$$K_{a2}$$K_{a3}$
oxalic, $\mathrm{H_{2}C_{2}O_{4}}$$5.6\times10^{-2}$$5.4\times10^{-5}$—
carbonic, $\mathrm{H_{2}CO_{3}}$$4.3\times10^{-7}$$5.6\times10^{-11}$—
hydrogen sulphide, $\mathrm{H_{2}S}$$9.1\times10^{-8}$$1.2\times10^{-13}$—
sulphuric, $\mathrm{H_{2}SO_{4}}$very large$1.2\times10^{-2}$—
phosphoric, $\mathrm{H_{3}PO_{4}}$$7.5\times10^{-3}$$6.2\times10^{-8}$$4.2\times10^{-13}$
📐 Result 6.20 — Stepwise ionisation of a polyprotic acid
  1. $K_{a1}\gt K_{a2}\gt K_{a3}$, usually by factors of $10^{4}$–$10^{6}$. Pulling a positive proton away from a negative ion ($\mathrm{HS^{-}}$) is much harder than from a neutral molecule ($\mathrm{H_{2}S}$), and harder still from a doubly charged ion; the higher charge of the anion formed is also less stable.
  2. When $K_{a1}\gg K_{a2}$, practically all the $\mathrm{H^{+}}$ comes from the first step: treat the acid as monobasic with $K_{a1}$. Then $[\mathrm{HA^{-}}]\approx[\mathrm{H^{+}}]$.
  3. In a solution of $\mathrm{H_{2}A}$ alone, putting $[\mathrm{H^{+}}]\approx[\mathrm{HA^{-}}]$ into $K_{a2}$ gives $$[\mathrm{A^{2-}}]\approx K_{a2},$$ independent of the acid's concentration.
  4. If a strong acid fixes $[\mathrm{H^{+}}]$, the overall constant gives $$[\mathrm{A^{2-}}]=\frac{K_{a1}K_{a2}[\mathrm{H_{2}A}]}{[\mathrm{H^{+}}]^{2}},$$ so $[\mathrm{A^{2-}}]$ falls as $1/[\mathrm{H^{+}}]^{2}$ — the basis of controlling sulphide in qualitative analysis.

Sulphuric acid is the odd one: its first step is complete (strong acid) but the second, $\mathrm{HSO_{4}^{-}\rightleftharpoons H^{+}+SO_{4}^{2-}}$, is only partial ($K_{a2}=1.2\times10^{-2}$). In dilute solution most problems take both steps as complete; a careful treatment (Exercise IV.3) gives a slightly higher pH.

✏️ Example 6 — Hydrogen sulphide, alone and in hydrochloric acid
A solution saturated with $\mathrm{H_{2}S}$ at 298 K contains $0.10\ \mathrm{M}$ $\mathrm{H_{2}S}$ ($K_{a1}=9.1\times10^{-8}$, $K_{a2}=1.2\times10^{-13}$). (a) Find its pH and $[\mathrm{S^{2-}}]$. (b) Find $[\mathrm{S^{2-}}]$ when the same solution also contains $0.30\ \mathrm{M}$ HCl. (c) By what factor has $[\mathrm{S^{2-}}]$ fallen?
Find $[\mathrm{S^{2-}}]$ in part (b) first:
(a) pH First step only: $[\mathrm{H^{+}}]\approx\sqrt{K_{a1}c}=\sqrt{9.1\times10^{-8}\times0.10}=9.5\times10^{-5}\ \mathrm{M}$, pH $=4.02$ ($\alpha=0.1\%$, small ✓). The second step adds only about $10^{-13}\ \mathrm{M}$ more $\mathrm{H^{+}}$.
(a) sulphide $[\mathrm{HS^{-}}]\approx[\mathrm{H^{+}}]$, so $K_{a2}=\dfrac{[\mathrm{H^{+}}][\mathrm{S^{2-}}]}{[\mathrm{HS^{-}}]}$ gives $[\mathrm{S^{2-}}]\approx K_{a2}=1.2\times10^{-13}\ \mathrm{M}$.
(b) Now $[\mathrm{H^{+}}]=0.30\ \mathrm{M}$ (from HCl; the $\mathrm{H_{2}S}$ adds a negligible amount and is now almost un-ionised): $[\mathrm{S^{2-}}]=\dfrac{(9.1\times10^{-8})(1.2\times10^{-13})(0.10)}{(0.30)^{2}}=\dfrac{1.09\times10^{-21}}{0.090}=1.2\times10^{-20}\ \mathrm{M}$.
(c) $\dfrac{1.2\times10^{-13}}{1.21\times10^{-20}}\approx1\times10^{7}$: ten million times less sulphide. In Section 6.4 this is exactly how only the least soluble sulphides are made to precipitate.
Check Common-ion logic: the added $\mathrm{H^{+}}$ pushes both ionisation steps back to the left, and $[\mathrm{S^{2-}}]$ depends on $[\mathrm{H^{+}}]^{2}$ because two protons stand between $\mathrm{H_{2}S}$ and $\mathrm{S^{2-}}$.

In the speciation explorer choose carbonic acid and set the pH to $8.3$ (roughly the pH of sea water and of baking-soda solution). Which species carries most of the dissolved carbon?

Set carbonic acid and pH $8.3$: the readouts show $\mathrm{H_{2}CO_{3}}$ $1.14\%$, $\mathrm{HCO_{3}^{-}}$ $97.8\%$ and $\mathrm{CO_{3}^{2-}}$ $1.09\%$. pH $8.3$ lies midway between $\mathrm{p}K_{a1}=6.37$ and $\mathrm{p}K_{a2}=10.25$, where the middle species is at its maximum. Slide to pH $6.35$: $\mathrm{H_{2}CO_{3}}$ $51.0\%$ and $\mathrm{HCO_{3}^{-}}$ $49.0\%$ — almost equal, because at $\mathrm{pH}=\mathrm{p}K_{a1}$ the ratio $K_{a1}/[\mathrm{H^{+}}]=1$. Then choose hydrogen sulphide and go to pH 1: $\mathrm{S^{2-}}$ is far too small to see — Example 6 in a picture.
Interactive 2 — Multistage Ionisation: Who Carries the Protons?

Choose a diprotic acid $\mathrm{H_{2}A}$ and set the pH of the solution (fixed by adding a strong acid or base). The curves show the fraction of the acid present as $\mathrm{H_{2}A}$ (red), $\mathrm{HA^{-}}$ (green) and $\mathrm{A^{2-}}$ (blue); dashed lines mark $\mathrm{p}K_{a1}$ and $\mathrm{p}K_{a2}$. The bar on top shows the mixture at the chosen pH. Press Play to sweep the pH from 0 to 14.

8.30
$\mathrm{H_{2}A}$—
$\mathrm{HA^{-}}$—
$\mathrm{A^{2-}}$—
$[\mathrm{HA^{-}}]/[\mathrm{H_{2}A}]$—
⚠️ JEE Main traps

1. pH of very dilute acids. $10^{-8}\ \mathrm{M}$ HCl has pH $6.98$, not 8, and $10^{-7}\ \mathrm{M}$ HCl has pH $6.79$, not 7. Whenever the acid or base supplies less than about $10^{-6}\ \mathrm{M}$, add water's ions (Result 6.17).

2. Neutral is not always pH 7. Neutral means $[\mathrm{H^{+}}]=[\mathrm{OH^{-}}]$. At 323 K pure water has pH $6.63$ and is still neutral; $\mathrm{pH}+\mathrm{pOH}=14$ holds only at 298 K.

3. Counting ions. $0.005\ \mathrm{M}$ $\mathrm{Ba(OH)_{2}}$ gives $0.010\ \mathrm{M}$ $\mathrm{OH^{-}}$; $0.005\ \mathrm{M}$ $\mathrm{H_{2}SO_{4}}$ (both steps complete) gives $0.010\ \mathrm{M}$ $\mathrm{H^{+}}$. When mixing, neutralise in millimoles and divide by the total volume.

4. Using $\sqrt{K_{a}c}$ blindly. The shortcut needs $\alpha\lt5\%$. For $0.010\ \mathrm{M}$ HF ($K_{a}=6.8\times10^{-4}$) it gives pH $2.58$; the quadratic gives $2.64$. And remember: dilution raises $\alpha$ but lowers $[\mathrm{H^{+}}]$.

5. Polyprotic acids. Do not double $[\mathrm{H^{+}}]$ for $\mathrm{H_{2}S}$ or $\mathrm{H_{2}CO_{3}}$ — the second step adds almost nothing. $[\mathrm{A^{2-}}]\approx K_{a2}$ only for the acid alone; with a strong acid present use $K_{a1}K_{a2}[\mathrm{H_{2}A}]/[\mathrm{H^{+}}]^{2}$. And the phosphorus oxoacids are traps for "basicity": $\mathrm{H_{3}PO_{3}}$ has only two ionisable H (one H is bonded to P) and $\mathrm{H_{3}PO_{2}}$ only one.

For a $0.10\ \mathrm{M}$ solution of $\mathrm{H_{2}S}$ alone, which is closest to $[\mathrm{S^{2-}}]$? ($K_{a1}=9.1\times10^{-8}$, $K_{a2}=1.2\times10^{-13}$)

Exercises

Temperature 298 K and $K_{w}=1.0\times10^{-14}$ unless stated. Use the $K_{a}$ and $K_{b}$ values in the tables of this section where none are given. $\log2=0.301$, $\log3=0.477$.

I
Acid–base concepts, ionisation constants and water.
  • 1 Write the conjugate base of $\mathrm{H_{2}PO_{4}^{-}}$, $\mathrm{HCO_{3}^{-}}$, $\mathrm{NH_{4}^{+}}$ and $\mathrm{H_{2}O}$, and the conjugate acid of $\mathrm{NH_{3}}$, $\mathrm{HPO_{4}^{2-}}$, $\mathrm{OH^{-}}$ and $\mathrm{CH_{3}COO^{-}}$.
  • 2 From $\mathrm{BF_{3}}$, $\mathrm{NH_{3}}$, $\mathrm{AlCl_{3}}$, $\mathrm{Fe^{3+}}$, $\mathrm{CN^{-}}$, $\mathrm{Cl^{-}}$, $\mathrm{SO_{3}}$, $\mathrm{CO_{2}}$: how many are Lewis acids?
  • 3 How many of the following are amphiprotic in water: $\mathrm{HCO_{3}^{-}}$, $\mathrm{H_{2}PO_{4}^{-}}$, $\mathrm{HPO_{4}^{2-}}$, $\mathrm{HS^{-}}$, $\mathrm{NH_{4}^{+}}$, $\mathrm{CH_{3}COO^{-}}$, $\mathrm{CO_{3}^{2-}}$?
  • 4 $K_{a}$ of HCN is $4.9\times10^{-10}$. Find $K_{b}$ and $\mathrm{p}K_{b}$ of $\mathrm{CN^{-}}$.
  • 5 $\mathrm{p}K_{a}$ of methanoic acid is $3.74$ and of ethanoic acid $4.74$. Which is the stronger acid, and by what factor? Find $K_{b}$ of the methanoate ion.
  • 6 Arrange in order of increasing acid strength and explain: (a) $\mathrm{HF}$, $\mathrm{HCl}$, $\mathrm{HBr}$, $\mathrm{HI}$; (b) $\mathrm{CH_{4}}$, $\mathrm{NH_{3}}$, $\mathrm{H_{2}O}$, $\mathrm{HF}$.
  • 7 Arrange $\mathrm{HClO_{4}}$, $\mathrm{HOCl}$, $\mathrm{HClO_{3}}$, $\mathrm{HClO_{2}}$ in order of increasing acid strength and explain. Why do $\mathrm{HClO_{4}}$ and $\mathrm{HCl}$ seem equally strong in water?
  • 8 $K_{w}=5.5\times10^{-14}$ at 323 K. Find the pH of pure water at 323 K. Is it acidic?
  • 9 How many hydronium ions are present in $1.0\ \mathrm{mL}$ of pure water at 298 K? ($N_{A}=6.022\times10^{23}\ \mathrm{mol^{-1}}$)
1 Conjugate bases (remove $\mathrm{H^{+}}$): $\mathrm{HPO_{4}^{2-}}$, $\mathrm{CO_{3}^{2-}}$, $\mathrm{NH_{3}}$, $\mathrm{OH^{-}}$. Conjugate acids (add $\mathrm{H^{+}}$): $\mathrm{NH_{4}^{+}}$, $\mathrm{H_{2}PO_{4}^{-}}$, $\mathrm{H_{2}O}$, $\mathrm{CH_{3}COOH}$.
2 Lewis acids: $\mathrm{BF_{3}}$, $\mathrm{AlCl_{3}}$ (incomplete octets), $\mathrm{Fe^{3+}}$ (cation), $\mathrm{SO_{3}}$, $\mathrm{CO_{2}}$ (accept a pair at S or C, e.g. $\mathrm{CO_{2}+OH^{-}\rightarrow HCO_{3}^{-}}$): 5. $\mathrm{NH_{3}}$, $\mathrm{CN^{-}}$, $\mathrm{Cl^{-}}$ are lone-pair donors (bases).
3 $\mathrm{HCO_{3}^{-}}$, $\mathrm{H_{2}PO_{4}^{-}}$, $\mathrm{HPO_{4}^{2-}}$, $\mathrm{HS^{-}}$ can both give and take a proton: 4. $\mathrm{NH_{4}^{+}}$ only gives one; $\mathrm{CH_{3}COO^{-}}$ and $\mathrm{CO_{3}^{2-}}$ only accept.
4 $K_{b}=\dfrac{1.0\times10^{-14}}{4.9\times10^{-10}}=2.0\times10^{-5}$; $\mathrm{p}K_{b}=4.69$ — cyanide is about as strong a base as ammonia.
5 Methanoic acid; $\Delta\mathrm{p}K_{a}=1$, so $K_{a}$ is 10 times larger. $\mathrm{p}K_{b}(\mathrm{HCOO^{-}})=14.00-3.74=10.26$, $K_{b}=5.5\times10^{-11}$.
6 (a) $\mathrm{HF\lt HCl\lt HBr\lt HI}$: down the group the $\mathrm{H{-}X}$ bond gets longer and weaker and the bigger anion spreads its charge; bond strength outweighs electronegativity. (b) $\mathrm{CH_{4}\lt NH_{3}\lt H_{2}O\lt HF}$: across the period electronegativity rises, the bond is more polar and the anion more stable.
7 $\mathrm{HOCl\lt HClO_{2}\lt HClO_{3}\lt HClO_{4}}$: each extra O (Cl oxidation state $+1,+3,+5,+7$) withdraws electron density from the O–H bond and lets the anion's charge spread over more O atoms by resonance. In water both $\mathrm{HClO_{4}}$ and $\mathrm{HCl}$ give up their protons completely to $\mathrm{H_{2}O}$ — the levelling effect; $\mathrm{H_{3}O^{+}}$ is the strongest acid that can exist in water.
8 $[\mathrm{H^{+}}]=\sqrt{5.5\times10^{-14}}=2.35\times10^{-7}\ \mathrm{M}$, pH $=6.63$. It is neutral — $[\mathrm{H^{+}}]=[\mathrm{OH^{-}}]$; only the neutral point has moved.
9 $1.0\times10^{-7}\ \mathrm{mol\,L^{-1}}\times1.0\times10^{-3}\ \mathrm{L}\times6.022\times10^{23}=6.0\times10^{13}$ ions — huge as a number, yet only about 2 in every $10^{9}$ water molecules.
II
Strong acids and bases, mixtures and very dilute solutions.
  • 1 Find the pH of $0.0050\ \mathrm{M}$ HCl.
  • 2 Find the pH of $0.0050\ \mathrm{M}$ $\mathrm{Ba(OH)_{2}}$.
  • 3 Find the pH of $1.0\times10^{-3}\ \mathrm{M}$ $\mathrm{H_{2}SO_{4}}$, taking both steps as complete.
  • 4 Find the pH of $2.0\times10^{-8}\ \mathrm{M}$ NaOH.
  • 5 A solution of HCl of pH 2.0 is diluted 1000 times. Find the new pH. What would the pH be after a further 1000-fold dilution?
  • 6 $50\ \mathrm{mL}$ of $0.10\ \mathrm{M}$ HCl is mixed with $50\ \mathrm{mL}$ of $0.060\ \mathrm{M}$ NaOH. Find the pH.
  • 7 Equal volumes of two HCl solutions of pH 2 and pH 4 are mixed. Find the pH.
  • 8 $40\ \mathrm{mL}$ of $0.050\ \mathrm{M}$ $\mathrm{Ba(OH)_{2}}$ is mixed with $30\ \mathrm{mL}$ of $0.10\ \mathrm{M}$ HCl. Find the pH.
  • 9 What mass of NaOH ($M=40\ \mathrm{g\,mol^{-1}}$) must be dissolved to make $250\ \mathrm{mL}$ of solution of pH $12.0$?
1 $\mathrm{pH}=-\log(5.0\times10^{-3})=3-0.70=2.30$.
2 $[\mathrm{OH^{-}}]=0.010\ \mathrm{M}$, $\mathrm{pOH}=2.00$, $\mathrm{pH}=12.00$.
3 $[\mathrm{H^{+}}]=2.0\times10^{-3}\ \mathrm{M}$, $\mathrm{pH}=2.70$.
4 Very dilute: $[\mathrm{OH^{-}}]=1.0\times10^{-8}+\sqrt{1.0\times10^{-16}+1.0\times10^{-14}}=1.10\times10^{-7}\ \mathrm{M}$; $\mathrm{pOH}=6.96$, $\mathrm{pH}=7.04$ — barely basic, not pH 6.3.
5 $[\mathrm{H^{+}}]$: $10^{-2}\to10^{-5}\ \mathrm{M}$, pH $5.0$. A further 1000-fold dilution gives $c=10^{-8}\ \mathrm{M}$: pH $6.98$ (Example 3), not 8.
6 $\mathrm{H^{+}}$: $5.0\ \mathrm{mmol}$; $\mathrm{OH^{-}}$: $3.0\ \mathrm{mmol}$. Excess $\mathrm{H^{+}}$ $2.0\ \mathrm{mmol}$ in $100\ \mathrm{mL}$: $0.020\ \mathrm{M}$, pH $1.70$.
7 $[\mathrm{H^{+}}]=\dfrac{10^{-2}+10^{-4}}{2}=5.05\times10^{-3}\ \mathrm{M}$, pH $=2.30$ — not the average 3; the stronger solution dominates.
8 $\mathrm{OH^{-}}$: $40\times0.050\times2=4.0\ \mathrm{mmol}$; $\mathrm{H^{+}}$: $3.0\ \mathrm{mmol}$. Excess $\mathrm{OH^{-}}$ $1.0\ \mathrm{mmol}$ in $70\ \mathrm{mL}$: $0.0143\ \mathrm{M}$, $\mathrm{pOH}=1.85$, $\mathrm{pH}=12.15$.
9 pH 12 → $[\mathrm{OH^{-}}]=0.010\ \mathrm{M}$; $n=0.010\times0.250=2.5\times10^{-3}\ \mathrm{mol}$; $m=0.100\ \mathrm{g}$.
III
Weak acids, weak bases and Ostwald's dilution law.
  • 1 Find the pH and $\alpha$ of $0.10\ \mathrm{M}$ methanoic acid ($K_{a}=1.8\times10^{-4}$), first by the shortcut and then exactly.
  • 2 Find the degree of ionisation and the pH of $0.050\ \mathrm{M}$ ammonia.
  • 3 A $0.020\ \mathrm{M}$ solution of a weak monobasic acid has pH $3.50$. Find $K_{a}$ and $\mathrm{p}K_{a}$.
  • 4 A $0.10\ \mathrm{M}$ weak acid ($\alpha\ll1$) is diluted 100 times. By what factor does $\alpha$ change, and by how much does the pH change?
  • 5 Find the pH of $0.010\ \mathrm{M}$ HF ($K_{a}=6.8\times10^{-4}$). Why must you not use the shortcut?
  • 6 What concentration of acetic acid has pH $3.00$?
  • 7 Find the pH of $0.10\ \mathrm{M}$ aniline ($K_{b}=4.3\times10^{-10}$).
  • 8 Two weak acids HX ($K_{a}=1.0\times10^{-5}$) and HY ($K_{a}=1.0\times10^{-7}$) are each $0.10\ \mathrm{M}$. Find the ratio of their $[\mathrm{H^{+}}]$ and the difference of their pH values.
1 Shortcut: $[\mathrm{H^{+}}]=\sqrt{1.8\times10^{-5}}=4.24\times10^{-3}$, pH $2.37$, $\alpha=4.2\%$ (borderline). Exact: $x^{2}+1.8\times10^{-4}x-1.8\times10^{-5}=0$ gives $x=4.15\times10^{-3}\ \mathrm{M}$, pH $=2.38$, $\alpha=4.2\%$.
2 $[\mathrm{OH^{-}}]=\sqrt{1.8\times10^{-5}\times0.050}=9.5\times10^{-4}\ \mathrm{M}$; $\alpha=1.9\%$; $\mathrm{pOH}=3.02$, $\mathrm{pH}=10.98$.
3 $[\mathrm{H^{+}}]=10^{-3.5}=3.16\times10^{-4}$; $K_{a}=\dfrac{(3.16\times10^{-4})^{2}}{0.020-0.000316}=5.1\times10^{-6}$; $\mathrm{p}K_{a}=5.29$.
4 $\alpha\propto1/\sqrt{c}$: $\alpha$ grows $\sqrt{100}=10$ times. $[\mathrm{H^{+}}]=c\alpha$ falls $100/10=10$ times, so the pH rises by $1$.
5 Shortcut: $\alpha\approx\sqrt{0.068}=0.26$ — far too large. Exact: $x^{2}+6.8\times10^{-4}x-6.8\times10^{-6}=0$, $x=2.29\times10^{-3}\ \mathrm{M}$, pH $=2.64$ (shortcut: $2.58$).
6 $[\mathrm{H^{+}}]=[\mathrm{A^{-}}]=1.0\times10^{-3}$; $[\mathrm{HA}]=\dfrac{(1.0\times10^{-3})^{2}}{1.8\times10^{-5}}=0.0556\ \mathrm{M}$; $c=[\mathrm{HA}]+[\mathrm{A^{-}}]=0.0566\ \mathrm{M}$.
7 $[\mathrm{OH^{-}}]=\sqrt{4.3\times10^{-11}}=6.6\times10^{-6}\ \mathrm{M}$ (still 66 times water's $10^{-7}$); $\mathrm{pOH}=5.18$, $\mathrm{pH}=8.82$ — aniline is a very weak base.
8 $[\mathrm{H^{+}}]\propto\sqrt{K_{a}}$ at equal $c$: ratio $\sqrt{100}=10$; pH values $3.00$ and $4.00$, difference $1.00$.
IV
Polyprotic acids and harder problems.
  • 1 Rain water in equilibrium with air may be treated as $1.0\times10^{-5}\ \mathrm{M}$ $\mathrm{H_{2}CO_{3}}$; soda water as $0.040\ \mathrm{M}$. Find the pH of the soda water and its $[\mathrm{CO_{3}^{2-}}]$.
  • 2 Find the pH of $0.10\ \mathrm{M}$ $\mathrm{H_{3}PO_{4}}$, considering only the first step.
  • 3 $\mathrm{H_{2}SO_{4}}$: first step complete, $K_{a2}=1.2\times10^{-2}$. Find the pH of $0.010\ \mathrm{M}$ $\mathrm{H_{2}SO_{4}}$ and compare it with the value for two complete steps.
  • 4 Find $[\mathrm{S^{2-}}]$ in $0.10\ \mathrm{M}$ $\mathrm{H_{2}S}$ that also contains $0.20\ \mathrm{M}$ HCl.
  • 5 What volume of water must be added to $1.0\ \mathrm{L}$ of $0.10\ \mathrm{M}$ acetic acid to double its degree of ionisation (use Ostwald's law with $\alpha\ll1$)?
  • 6 At body temperature, 310 K, $K_{w}=2.4\times10^{-14}$. Find the pH of neutral water at 310 K. Is blood (pH 7.4) acidic, neutral or basic?
  • 7 A $0.10\ \mathrm{M}$ solution of a weak monobasic acid is $1.0\%$ ionised. Find its pH, $K_{a}$ and the $\mathrm{p}K_{b}$ of its conjugate base.
  • 8 Explain why $\mathrm{H_{3}PO_{3}}$ is dibasic and $\mathrm{H_{3}PO_{2}}$ monobasic, although both formulas contain three H atoms.
1 $[\mathrm{H^{+}}]\approx\sqrt{4.3\times10^{-7}\times0.040}=1.31\times10^{-4}\ \mathrm{M}$, pH $=3.88$; $[\mathrm{CO_{3}^{2-}}]\approx K_{a2}=5.6\times10^{-11}\ \mathrm{M}$.
2 $\alpha$ is not small ($K_{a1}/c=0.075$): $x^{2}+7.5\times10^{-3}x-7.5\times10^{-4}=0$, $x=0.0239\ \mathrm{M}$, pH $=1.62$ (shortcut would give $1.56$).
3 After step 1: $[\mathrm{H^{+}}]=[\mathrm{HSO_{4}^{-}}]=0.010$. Step 2: $\dfrac{(0.010+x)x}{0.010-x}=0.012$, i.e. $x^{2}+0.022x-1.2\times10^{-4}=0$, $x=4.5\times10^{-3}$. $[\mathrm{H^{+}}]=0.0145\ \mathrm{M}$, pH $=1.84$ (two complete steps: $1.70$).
4 $[\mathrm{S^{2-}}]=\dfrac{(9.1\times10^{-8})(1.2\times10^{-13})(0.10)}{(0.20)^{2}}=2.7\times10^{-20}\ \mathrm{M}$.
5 $\alpha\propto1/\sqrt{c}$: doubling $\alpha$ needs $c/4$, i.e. a total volume of $4.0\ \mathrm{L}$: add $3.0\ \mathrm{L}$.
6 $[\mathrm{H^{+}}]=\sqrt{2.4\times10^{-14}}=1.55\times10^{-7}$, neutral pH $=6.81$. Blood at pH 7.4 is (slightly) basic.
7 $[\mathrm{H^{+}}]=c\alpha=1.0\times10^{-3}$, pH $3.00$; $K_{a}=\dfrac{c\alpha^{2}}{1-\alpha}=\dfrac{0.10\times10^{-4}}{0.99}=1.0\times10^{-5}$; $\mathrm{p}K_{b}=14.00-5.00=9.00$.
8 Only H atoms bonded to O (O–H) ionise. $\mathrm{H_{3}PO_{3}}$ is $\mathrm{HPO(OH)_{2}}$ — two O–H and one P–H: dibasic. $\mathrm{H_{3}PO_{2}}$ is $\mathrm{H_{2}PO(OH)}$ — one O–H: monobasic. The P–H bond is hardly polar.
🎯 Exam corner JEE Main · MCQJEE Main · Numerical

E1. JEE Main · MCQ The pH of a $1.0\times10^{-7}\ \mathrm{M}$ NaOH solution at 298 K is closest to (A) $7.00$ (B) $6.79$ (C) $7.21$ (D) $7.30$

Idea The base supplies as many $\mathrm{OH^{-}}$ as water itself, so water's ions must be included: $[\mathrm{OH^{-}}]=c+[\mathrm{H^{+}}]$.
Solve $[\mathrm{OH^{-}}]=\tfrac{c}{2}+\sqrt{\tfrac{c^{2}}{4}+K_{w}}=(0.5+1.118)\times10^{-7}=1.62\times10^{-7}\ \mathrm{M}$; $\mathrm{pOH}=6.79$, $\mathrm{pH}=7.21$.
Answer (C).
⏱ Shortcut pH must lie between 7.00 (water) and 7.30 (the naive $2\times10^{-7}$): only (C) does. (B) is the answer for $10^{-7}\ \mathrm{M}$ HCl.

E2. JEE Main · Numerical A weak monobasic acid has $K_{a}=2.0\times10^{-5}$ at 298 K. The pH of its $0.20\ \mathrm{M}$ aqueous solution is $x$. Find the value of $10x$. Give the answer to the nearest integer.

Shortcut valid? $\alpha\approx\sqrt{K_{a}/c}=\sqrt{10^{-4}}=0.01$ — yes.
pH $[\mathrm{H^{+}}]=\sqrt{2.0\times10^{-5}\times0.20}=\sqrt{4.0\times10^{-6}}=2.0\times10^{-3}\ \mathrm{M}$; $x=3-\log2=2.70$; $10x=27.0$.
Answer $27$.

E3. JEE Main · MCQ Three weak acids HA, HB and HC have $K_{a}=1\times10^{-4}$, $1\times10^{-6}$ and $1\times10^{-9}$ respectively at 298 K. The strongest base among their conjugate bases, and its $K_{b}$, are (A) $\mathrm{C^{-}}$, $1\times10^{-5}$ (B) $\mathrm{A^{-}}$, $1\times10^{-10}$ (C) $\mathrm{C^{-}}$, $1\times10^{-9}$ (D) $\mathrm{B^{-}}$, $1\times10^{-8}$

Idea The weakest acid has the strongest conjugate base: HC, so $\mathrm{C^{-}}$.
Value $K_{b}=\dfrac{K_{w}}{K_{a}}=\dfrac{10^{-14}}{10^{-9}}=1\times10^{-5}$.
Answer (A).
⏱ Shortcut $\mathrm{p}K_{b}=14-\mathrm{p}K_{a}=14-9=5$. Option (C) copies $K_{a}$ instead of $K_{b}$.

E4. JEE Main · Numerical A $0.10\ \mathrm{M}$ solution of a weak monobasic acid ($K_{a}=1.0\times10^{-5}$) is diluted with water. Using Ostwald's dilution law in its approximate form ($\alpha\ll1$), by what factor must the solution be diluted so that its pH increases by exactly one unit? Give the answer to the nearest integer.

Relation $\mathrm{pH}=\tfrac12(\mathrm{p}K_{a}-\log c)$, so $\Delta\mathrm{pH}=-\tfrac12\Delta\log c$.
Solve $\Delta\mathrm{pH}=1$ needs $\Delta\log c=-2$: the concentration must fall by $10^{2}$ (from pH $3.00$ to $4.00$; $\alpha$ goes from $1\%$ to $10\%$).
Answer $100$.
⏱ Shortcut Strong acid: 10-fold per pH unit; weak acid: 100-fold per pH unit.

E5. JEE Main · MCQ A solution is $0.10\ \mathrm{M}$ in $\mathrm{H_{2}S}$ and $0.10\ \mathrm{M}$ in HCl. For $\mathrm{H_{2}S}$, $K_{a1}=1.0\times10^{-7}$ and $K_{a2}=1.2\times10^{-13}$. The concentration of $\mathrm{S^{2-}}$ is (A) $1.2\times10^{-13}\ \mathrm{M}$ (B) $1.2\times10^{-20}\ \mathrm{M}$ (C) $6.0\times10^{-21}\ \mathrm{M}$ (D) $1.2\times10^{-19}\ \mathrm{M}$

Idea HCl fixes $[\mathrm{H^{+}}]=0.10\ \mathrm{M}$ and suppresses both steps; use the overall equilibrium $\mathrm{H_{2}S\rightleftharpoons2H^{+}+S^{2-}}$.
Solve $[\mathrm{S^{2-}}]=\dfrac{K_{a1}K_{a2}[\mathrm{H_{2}S}]}{[\mathrm{H^{+}}]^{2}}=\dfrac{(1.2\times10^{-20})(0.10)}{(0.10)^{2}}=1.2\times10^{-19}\ \mathrm{M}$.
Answer (D).
⏱ Shortcut With $[\mathrm{H_{2}S}]=[\mathrm{H^{+}}]=0.10$, $[\mathrm{S^{2-}}]=K_{a1}K_{a2}/0.10$. (A) is the answer without HCl; (B) forgets to divide by $[\mathrm{H^{+}}]^{2}$ properly.

E6. JEE Main · Numerical How many of the following species can act both as a Brønsted–Lowry acid and as a Brønsted–Lowry base in water? $\mathrm{H_{2}O}$, $\mathrm{HCO_{3}^{-}}$, $\mathrm{H_{2}PO_{4}^{-}}$, $\mathrm{HPO_{4}^{2-}}$, $\mathrm{HS^{-}}$, $\mathrm{NH_{4}^{+}}$, $\mathrm{CO_{3}^{2-}}$, $\mathrm{H_{2}PO_{2}^{-}}$, $\mathrm{HPO_{3}^{2-}}$, $\mathrm{CH_{3}COO^{-}}$

Test Each needs an ionisable (O–H or S–H) hydrogen and the ability to take a proton. Yes: $\mathrm{H_{2}O}$, $\mathrm{HCO_{3}^{-}}$, $\mathrm{H_{2}PO_{4}^{-}}$, $\mathrm{HPO_{4}^{2-}}$, $\mathrm{HS^{-}}$.
Traps $\mathrm{H_{2}PO_{2}^{-}}$ (from monobasic $\mathrm{H_{3}PO_{2}}$) and $\mathrm{HPO_{3}^{2-}}$ (from dibasic $\mathrm{H_{3}PO_{3}}$) contain H only on P, which does not ionise — they are bases only. $\mathrm{NH_{4}^{+}}$ is only an acid; $\mathrm{CO_{3}^{2-}}$ and $\mathrm{CH_{3}COO^{-}}$ only bases.
Answer $5$.
🔬 Research–Teaching NexusResearch-tutored · optional, about 60 minutes

Research question. Can a dilution series tell you whether an unknown acid is strong or weak — and give you its $K_{a}$?

Why it matters. Water-quality laboratories, food-safety inspectors and environmental agencies monitoring acid rain all meet solutions whose acid content is unknown. A single pH reading cannot distinguish "a little strong acid" from "a lot of weak acid", but the way the pH responds to dilution can: Result 6.17 predicts a slope of $1$ pH unit per tenfold dilution for a strong acid, and Result 6.19 a slope of $\tfrac12$ for a weak one.

What to do.

  1. Under supervision, prepare about $0.1\ \mathrm{M}$ solutions of a strong acid (dilute hydrochloric acid) and of white vinegar diluted to a similar acid content (vinegar is about $0.8\ \mathrm{M}$ acetic acid).
  2. Make a series of tenfold dilutions of each down to about $10^{-5}\ \mathrm{M}$, using a measuring cylinder or pipette and distilled water.
  3. Measure the pH of each with a calibrated pH meter (or narrow-range pH paper).
  4. Plot pH against $\log c$ for both acids. Fit straight lines to the first few points and compare the slopes with $1$ and $\tfrac12$.
  5. From the weak-acid line, find $\mathrm{p}K_{a}$ (its intercept: $\mathrm{pH}=\tfrac12\mathrm{p}K_{a}$ at $\log c=0$) and compare with $4.74$.

Tools: pH meter or pH paper, volumetric glassware, distilled water, dilute HCl, vinegar, a spreadsheet; the Dilution Lab above to compare your curve with theory.

Hand in: A table of $c$ and pH for both acids, the graph with fitted slopes, your $\mathrm{p}K_{a}$ estimate for acetic acid with its uncertainty, and a paragraph explaining why the curves bend at the most dilute end.

Going further. Distilled water left open to air absorbs $\mathrm{CO_{2}}$ and has pH near 5.6. How does that limit the most dilute points? Use Interactive 2 to explain why rain water is acidic even without pollution.

Instructor note: students typically find slopes near $0.9$–$1.0$ for HCl and $0.45$–$0.55$ for vinegar over the first two or three decades, and a $\mathrm{p}K_{a}$ within $0.2$ of $4.74$. Below about $10^{-4}\ \mathrm{M}$ dissolved $\mathrm{CO_{2}}$ and electrode drift dominate — a good discussion point on the limits of a model.

🧪 Self-check quiz

0/5 correct

Q1. The conjugate base of $\mathrm{H_{2}PO_{4}^{-}}$ is

Q2. The pH of $0.0010\ \mathrm{M}$ NaOH at 298 K is

Q3. A weak acid HA has $K_{a}=1.0\times10^{-5}$ at 298 K. $K_{b}$ of $\mathrm{A^{-}}$ is

Q4. A solution of a weak acid ($\alpha\ll1$) is diluted to one quarter of its original concentration. Its degree of ionisation becomes

Q5. At 323 K the ionic product of water is $5.5\times10^{-14}$ and pure water has pH $6.63$. This water is