Chapter 17 · Organic Compounds Containing Oxygen

17.3 Aldehydes and Ketones: the Carbonyl Group and Nucleophilic Addition

The $\mathrm{C{=}O}$ group is flat and polar, and its carbon is an electrophile. Nucleophiles add to it — cyanide, bisulphite, alcohols, Grignard reagents, ammonia and its derivatives — and how readily they do so is set by the electronic and steric effects of the two groups on that carbon.

The smell of almonds is benzaldehyde; cinnamon owes its flavour to cinnamaldehyde and vanilla to vanillin. Nail-polish remover is propanone (acetone), a 37–40 % solution of methanal in water (formalin) preserves biological specimens, and the hormone progesterone and the sugar fructose both carry a ketone group. One small group of atoms, a carbon joined to an oxygen by a double bond, sits at the centre of all of them — and of a large share of JEE Main organic questions.

The carbonyl group behaves very differently from the $\mathrm{C{=}C}$ bond of an alkene. Its π electrons are pulled towards oxygen, so the carbon is electron-poor and is attacked by nucleophiles, not electrophiles. In this section we look at the structure of the group, how aldehydes and ketones are named and made, and why they boil where they do. Then we follow the one mechanism that explains most of their chemistry, nucleophilic addition, and apply it to hydrogen cyanide, sodium hydrogensulphite, alcohols, Grignard reagents and ammonia derivatives. Oxidation, reduction, the reactions of the α-hydrogen and the tests are in Section 17.4. You will need the electronic effects of Section 14.3 and IUPAC naming from Section 14.1.

The carbonyl group: structure, names and physical properties

📘 Definition 17.5 — Carbonyl group, aldehydes and ketones

The carbonyl group is $\mathrm{{gt}C{=}O}$: a carbon atom joined to an oxygen atom by a double bond. In an aldehyde the carbonyl carbon carries at least one hydrogen atom, giving the group $\mathrm{{-}CHO}$ (formyl group); the other group is H (methanal only), alkyl or aryl. In a ketone the carbonyl carbon carries two carbon groups, $\mathrm{R{-}CO{-}R'}$; the ketone is simple (symmetrical) if $\mathrm{R=R'}$ and mixed if $\mathrm{R\ne R'}$. The general formula of saturated open-chain aldehydes and ketones is $\mathrm{C_{n}H_{2n}O}$ (functional isomers of each other).

The carbonyl carbon is $sp^{2}$ hybridised. Its three $sp^{2}$ orbitals form three σ bonds — to oxygen and to the two other groups — that lie in one plane at about $120^\circ$ to each other. The unhybridised $2p$ orbital of carbon overlaps sideways with a $2p$ orbital of oxygen to form the π bond, whose electron cloud lies above and below that plane. Oxygen carries two lone pairs in the plane.

Two consequences follow. First, the group is strongly polar: dipole moments are large (methanal $2.3\ \mathrm{D}$, propanone $2.9\ \mathrm{D}$), larger than those of alcohols and ethers. Second, the carbon is electrophilic and the oxygen is weakly basic (its lone pairs can take a proton or bind a Lewis acid, which makes the carbon even more positive). Because the group is flat, a reagent can reach the carbon easily from above or below the plane.

Naming aldehydes and ketones

In IUPAC names the aldehyde ending is -al and the ketone ending is -one, added to the name of the longest chain that contains the carbonyl carbon. The aldehyde carbon is always C-1, so it needs no locant; the ketone carbon gets the lowest possible locant. When $\mathrm{{-}CHO}$ is attached to a ring, the suffix -carbaldehyde is used (the CHO carbon is not counted in the ring name). If a higher-priority group is present, the aldehyde becomes the prefix formyl and a ketone the prefix oxo; between the two, the aldehyde is the principal group, so $\mathrm{CH_{3}COCH_{2}CHO}$ is 3-oxobutanal.

StructureCommon nameIUPAC name
$\mathrm{HCHO}$formaldehydemethanal
$\mathrm{CH_{3}CHO}$acetaldehydeethanal
$\mathrm{(CH_{3})_{2}CHCH_{2}CHO}$isovaleraldehyde3-methylbutanal
$\mathrm{CH_{3}CH{=}CHCHO}$crotonaldehydebut-2-enal
$\mathrm{C_{6}H_{5}CHO}$benzaldehydebenzenecarbaldehyde
$\mathrm{CH_{3}COCH_{3}}$acetonepropan-2-one (propanone)
$\mathrm{CH_{3}COCH_{2}CH_{3}}$ethyl methyl ketonebutan-2-one
$\mathrm{(CH_{3})_{2}C{=}CHCOCH_{3}}$mesityl oxide4-methylpent-3-en-2-one
$\mathrm{C_{6}H_{5}COCH_{3}}$acetophenone1-phenylethan-1-one
$\mathrm{C_{6}H_{5}COC_{6}H_{5}}$benzophenonediphenylmethanone

In common names the positions along the chain are lettered from the carbon next to the carbonyl group: α, β, γ … So $\mathrm{CH_{3}CH(Cl)CHO}$ is α-chloropropionaldehyde, 2-chloropropanal in IUPAC. The α-carbon will matter a great deal in Section 17.4.

Physical properties

Methanal is a gas at room temperature (b.p. $254\ \mathrm{K}$); ethanal boils at $294\ \mathrm{K}$, and the other lower members are liquids. Their boiling points sit between those of hydrocarbons and ethers on the one hand and alcohols on the other, for compounds of similar molar mass:

Compound$M$ / $\mathrm{g\,mol^{-1}}$b.p. / KStrongest attraction between molecules
butane, $\mathrm{CH_{3}CH_{2}CH_{2}CH_{3}}$58273dispersion forces only
methoxyethane, $\mathrm{CH_{3}OCH_{2}CH_{3}}$60281weak dipole–dipole
propanal, $\mathrm{CH_{3}CH_{2}CHO}$58322strong dipole–dipole ($\mathrm{C{=}O}$)
propanone, $\mathrm{CH_{3}COCH_{3}}$58329strong dipole–dipole ($\mathrm{C{=}O}$)
propan-1-ol, $\mathrm{CH_{3}CH_{2}CH_{2}OH}$60370hydrogen bonding ($\mathrm{O{-}H\cdots O}$)

The carbonyl dipoles line up and attract one another, so aldehydes and ketones boil well above alkanes and ethers. But they have no $\mathrm{O{-}H}$ bond, so they cannot hydrogen-bond to each other, and they boil well below alcohols. They can, however, accept hydrogen bonds from water through the oxygen lone pairs: methanal, ethanal and propanone mix with water in all proportions. Solubility falls as the hydrophobic carbon chain grows; hexanal and hexan-2-one are only slightly soluble. Lower aldehydes have sharp, pungent smells; larger aldehydes and ketones are often fragrant and are used in perfumes and flavours.

✏️ Example 1 — Names, isomers and boiling points
(a) Name $\mathrm{CH_{3}CH(CH_{3})COCH_{2}CH_{3}}$ and $\mathrm{OHC{-}CH_{2}CH_{2}{-}CHO}$. (b) How many aldehydes and ketones (structural isomers only) have the formula $\mathrm{C_{5}H_{10}O}$? (c) Arrange pentane, butanal, butan-1-ol and ethoxyethane in order of increasing boiling point, with reasons.
(a) The chain of five carbons containing $\mathrm{C{=}O}$: $\mathrm{CH_{3}CH_{2}{-}CO{-}CH(CH_{3}){-}CH_{3}}$. Numbering from the end nearer the carbonyl gives C=O at C-3 either way; the methyl then gets locant 2: 2-methylpentan-3-one. The dialdehyde is butanedial (both CHO carbons are counted; no locants are needed).
(b) Aldehydes $\mathrm{C_{4}H_{9}CHO}$, one for each $\mathrm{C_{4}H_{9}}$ group: pentanal, 2-methylbutanal, 3-methylbutanal, 2,2-dimethylpropanal — 4. Ketones: pentan-2-one, pentan-3-one, 3-methylbutan-2-one — 3. Total 7.
(c) Molar masses are all 72–74, so the forces decide: ethoxyethane ($308\ \mathrm{K}$) ≈ pentane ($309\ \mathrm{K}$) $\lt$ butanal ($348\ \mathrm{K}$) $\lt$ butan-1-ol ($391\ \mathrm{K}$). The ether's small dipole adds little to dispersion forces; butanal has strong $\mathrm{C{=}O}$ dipole–dipole attraction; the alcohol hydrogen-bonds.
Check Every $\mathrm{C_{5}H_{10}O}$ carbonyl isomer has one degree of unsaturation (the $\mathrm{C{=}O}$), as $\mathrm{C_{n}H_{2n}O}$ requires.

Which statement about propanone and propan-1-ol (molar masses 58 and 60) is correct?

Preparing aldehydes and ketones

Most routes either oxidise something at the level of an alcohol or reduce something at the level of a carboxylic acid, or else build the $\mathrm{C{-}CO}$ bond directly. The main ones on the JEE Main list are gathered below; reagents are written over the arrow and conditions under it.

📐 Rule 17.13 — General methods of preparation

1. Oxidation of alcohols. A $1^{\circ}$ alcohol gives an aldehyde, a $2^{\circ}$ alcohol a ketone; $3^{\circ}$ alcohols resist mild oxidation. Acidified dichromate oxidises an aldehyde further to the acid unless the aldehyde (lower b.p.) is distilled out as it forms; pyridinium chlorochromate (PCC) in $\mathrm{CH_{2}Cl_{2}}$ stops at the aldehyde.

$$\mathrm{RCH_{2}OH\xrightarrow{PCC,\ CH_{2}Cl_{2}}RCHO}\qquad \mathrm{R_{2}CHOH\xrightarrow{K_{2}Cr_{2}O_{7}/H^{+}}R_{2}CO}$$

2. Dehydrogenation of alcohols. Vapours passed over heated copper ($573\ \mathrm{K}$): $\mathrm{RCH_{2}OH\rightarrow RCHO+H_{2}}$, $\mathrm{R_{2}CHOH\rightarrow R_{2}CO+H_{2}}$ — used industrially.

3. Ozonolysis of alkenes. $\mathrm{O_{3}}$ adds across $\mathrm{C{=}C}$ to give an ozonide; reductive work-up with zinc dust and water cleaves it to two carbonyl compounds, each double-bonded carbon becoming a $\mathrm{C{=}O}$ (the zinc stops $\mathrm{H_{2}O_{2}}$ from oxidising aldehydes to acids).

$$\mathrm{R_{2}C{=}CHR'\xrightarrow[\text{(ii) Zn/H}_2\text{O}]{\text{(i) O}_3}R_{2}C{=}O+R'CHO}$$

4. Hydration of alkynes. With $\mathrm{HgSO_{4}}$ in dilute $\mathrm{H_{2}SO_{4}}$ ($333\ \mathrm{K}$), ethyne gives ethanal and other alkynes give ketones (Markovnikov addition, via the enol): $\mathrm{CH_{3}C{\equiv}CH\rightarrow CH_{3}COCH_{3}}$.

5. Rosenmund reduction (acyl chloride → aldehyde). Hydrogen over palladium on barium sulphate, the catalyst partly poisoned with sulphur or quinoline so that the aldehyde is not reduced further to the alcohol:

$$\mathrm{RCOCl+H_{2}\xrightarrow{Pd{-}BaSO_{4}}RCHO+HCl}$$

6. Stephen reaction (nitrile → aldehyde). Tin(II) chloride and HCl reduce the nitrile to an imine (as its hydrochloride), which water hydrolyses:

$$\mathrm{RC{\equiv}N\xrightarrow{SnCl_{2}/HCl}RCH{=}NH\xrightarrow{H_{3}O^{+}}RCHO+NH_{4}^{+}}$$

Diisobutylaluminium hydride (DIBAL-H) also reduces nitriles (and esters) only as far as the aldehyde.

7. Nitriles with Grignard reagents (nitrile → ketone). $\mathrm{R'MgX}$ adds once to the $\mathrm{C{\equiv}N}$ carbon; the imine salt is hydrolysed:

$$\mathrm{RC{\equiv}N+R'MgX\rightarrow RR'C{=}NMgX\xrightarrow{H_{3}O^{+}}RCOR'}$$

8. Etard reaction (methylbenzene → benzaldehyde). Chromyl chloride in $\mathrm{CS_{2}}$ forms a brown chromium complex (the Etard complex) that water hydrolyses to the aldehyde. Alternatively $\mathrm{CrO_{3}}$ in ethanoic anhydride gives benzylidene diacetate, $\mathrm{C_{6}H_{5}CH(OCOCH_{3})_{2}}$, hydrolysed by aqueous acid. In both, the aldehyde is protected as a complex or a diacetate and is not oxidised further.

$$\mathrm{C_{6}H_{5}CH_{3}\xrightarrow[\text{(ii) H}_3\text{O}^+]{\text{(i) CrO}_2\text{Cl}_2,\ \text{CS}_2}C_{6}H_{5}CHO}$$

9. Friedel–Crafts acylation (arene → aryl ketone). An acyl chloride with anhydrous $\mathrm{AlCl_{3}}$; the acylium ion $\mathrm{RC{\equiv}O^{+}}$ is the electrophile. The product ketone deactivates the ring, so only one acyl group goes in. With $\mathrm{CO}$ and $\mathrm{HCl}$ (anhydrous $\mathrm{AlCl_{3}}$/$\mathrm{CuCl}$) benzene gives benzaldehyde (Gattermann–Koch).

$$\mathrm{C_{6}H_{6}+RCOCl\xrightarrow{\text{anhyd. AlCl}_3}C_{6}H_{5}COR+HCl}$$
🧭 Problem-solving strategy — Choosing a route to a carbonyl compound
  1. Aldehyde or ketone? Aldehydes need a method that stops early: PCC on a $1^{\circ}$ alcohol, Rosenmund (from $\mathrm{RCOCl}$), Stephen or DIBAL-H (from $\mathrm{RCN}$), Etard (from $\mathrm{ArCH_{3}}$). Ketones come from $2^{\circ}$ alcohols, Friedel–Crafts acylation, nitrile + Grignard, or alkyne hydration.
  2. Count the carbons. Oxidation, Rosenmund, Stephen and Etard keep the carbon skeleton. Nitrile + $\mathrm{R'MgX}$ and Friedel–Crafts add carbons; ozonolysis splits the chain at $\mathrm{C{=}C}$.
  3. Run ozonolysis backwards to find an alkene: write the carbonyl products with their $\mathrm{C{=}O}$ carbons facing each other, delete both oxygens and join those two carbons by a double bond.
✏️ Example 2 — Working back from ozonolysis
(a) An alkene A, $\mathrm{C_{6}H_{12}}$, gives a single carbonyl compound on ozonolysis (Zn/H₂O work-up), and that compound is a ketone. Identify A. (b) Alkene B, also $\mathrm{C_{6}H_{12}}$, gives propanone and propanal. Identify B. (c) What is the total mass of carbonyl products from $8.4\ \mathrm{g}$ of B, if the reaction is complete?
Find (c), the total mass of propanone + propanal, before you open the solution:
(a) One product means the alkene is symmetrical about $\mathrm{C{=}C}$; each half has three carbons and must give a ketone, i.e. $\mathrm{(CH_{3})_{2}C{=}}$. So A is $\mathrm{(CH_{3})_{2}C{=}C(CH_{3})_{2}}$, 2,3-dimethylbut-2-ene, giving 2 mol of propanone. (Hex-3-ene also gives one product, but it is propanal, an aldehyde.)
(b) Face the carbonyl carbons: $\mathrm{(CH_{3})_{2}C{=}O\ \ O{=}CHCH_{2}CH_{3}}$. Remove the O atoms and join: $\mathrm{(CH_{3})_{2}C{=}CHCH_{2}CH_{3}}$, 2-methylpent-2-ene.
(c) $M(\mathrm{C_{6}H_{12}})=84\ \mathrm{g\,mol^{-1}}$, so $n=8.4/84=0.10\ \mathrm{mol}$. Products: $0.10\ \mathrm{mol}$ propanone + $0.10\ \mathrm{mol}$ propanal $=0.20\times58=11.6\ \mathrm{g}$.
Check Mass balance: $8.4\ \mathrm{g}$ of B gains $0.20\ \mathrm{mol}$ of O atoms ($3.2\ \mathrm{g}$): $8.4+3.2=11.6\ \mathrm{g}$ ✓.
✏️ Example 3 — Picking the reagent
Give reagents for: (a) benzene → 1-phenylethan-1-one; (b) methylbenzene → benzaldehyde; (c) ethanenitrile → ethanal; (d) ethanenitrile → propanone; (e) propanoyl chloride → propanal. In each case, what stops the reaction from going too far?
(a) $\mathrm{CH_{3}COCl}$, anhydrous $\mathrm{AlCl_{3}}$ (Friedel–Crafts acylation). The $\mathrm{COCH_{3}}$ group withdraws electrons from the ring, so a second acylation does not occur.
(b) $\mathrm{CrO_{2}Cl_{2}}$ in $\mathrm{CS_{2}}$, then $\mathrm{H_{3}O^{+}}$ (Etard). The aldehyde is tied up in the chromium complex until hydrolysis.
(c) $\mathrm{SnCl_{2}/HCl}$, then $\mathrm{H_{3}O^{+}}$ (Stephen) — or DIBAL-H then $\mathrm{H_{2}O}$. The intermediate is an imine, which is not reduced further.
(d) $\mathrm{CH_{3}MgBr}$ in dry ether, then $\mathrm{H_{3}O^{+}}$: $\mathrm{CH_{3}CN\rightarrow(CH_{3})_{2}C{=}NMgBr\rightarrow CH_{3}COCH_{3}}$. The negatively charged imine salt does not take a second $\mathrm{CH_{3}^{-}}$.
(e) $\mathrm{H_{2}}$, $\mathrm{Pd{-}BaSO_{4}}$ poisoned with S or quinoline (Rosenmund). The poisoned catalyst reduces $\mathrm{C{-}Cl}$ but not $\mathrm{C{=}O}$.

Which reaction gives a ketone as the final organic product?

Nucleophilic addition: mechanism and reactivity

An alkene's π electrons are attacked by electrophiles. The carbonyl π bond is already polarised towards oxygen, so the reagent that matters is the one that brings electrons to the carbon. The characteristic reaction of aldehydes and ketones is therefore an addition that begins with a nucleophile.

📘 Definition 17.6 — Nucleophilic addition

A nucleophilic addition to a carbonyl compound is a reaction in which a nucleophile $\mathrm{Nu^{-}}$ (or a neutral $\mathrm{Nu{:}}$) bonds to the carbonyl carbon and an electrophile, usually $\mathrm{H^{+}}$, bonds to the oxygen, so that the $\mathrm{C{=}O}$ double bond becomes a single bond: $\mathrm{R_{2}C{=}O+H{-}Nu\rightarrow R_{2}C(OH)Nu}$.

📐 Principle 17.14 — Mechanism of nucleophilic addition

Step 1 (slow, rate-determining). The nucleophile approaches the planar carbonyl carbon from above or below the plane and forms a σ bond to it, while the π electron pair moves on to oxygen. The carbon changes from $sp^{2}$ (trigonal planar, $120^\circ$) to $sp^{3}$ (tetrahedral, about $109.5^\circ$), giving a tetrahedral alkoxide intermediate.

Step 2 (fast). The alkoxide oxygen takes a proton from the solvent or from $\mathrm{H{-}Nu}$, giving the neutral addition product.

Acid catalysis. With weak nucleophiles (water, alcohols, $\mathrm{NH_{2}{-}Z}$) a trace of acid first protonates the carbonyl oxygen. The protonated carbonyl, $\mathrm{R_{2}C{=}OH^{+}\leftrightarrow R_{2}C^{+}{-}OH}$, has a much more electrophilic carbon. Stereochemistry: attack from the two faces is equally likely, so if the carbon becomes a new stereocentre, a racemic mixture forms.

The addition of hydrogen cyanide shows both steps clearly. $\mathrm{HCN}$ itself is a poor nucleophile and adds only very slowly. A little base turns some of it into cyanide ion, $\mathrm{HCN+OH^{-}\rightleftharpoons CN^{-}+H_{2}O}$, and the reaction becomes fast:

Why aldehydes are more reactive than ketones

Two factors set how fast — and how far — a nucleophile adds. Both are visible in the mechanism: step 1 needs a positive carbon that the nucleophile can reach, and the product squeezes three groups plus the nucleophile around one $sp^{3}$ carbon.

📐 Rule 17.15 — Relative reactivity towards nucleophilic addition

Electronic effect. Anything that increases the positive charge on the carbonyl carbon increases reactivity. Alkyl groups ($+I$, hyperconjugation) feed electrons to the carbon and reduce it; a ketone has two such groups, an aldehyde one, methanal none. An aryl group conjugated with $\mathrm{C{=}O}$ ($+R$ effect of the ring) also reduces it. Electron-withdrawing groups ($\mathrm{{-}Cl}$, $\mathrm{{-}CCl_{3}}$, $\mathrm{{-}NO_{2}}$ on a ring) increase it.

Steric effect. The nucleophile must reach a carbon shielded by two groups, and in the product the bond angles close from $120^\circ$ to about $109.5^\circ$, crowding the groups together. Two large groups (ketones) hinder this more than one large group and a small H (aldehydes).

Resulting orders (both effects act in the same direction):

$$\mathrm{HCHO\gt CH_{3}CHO\gt CH_{3}CH_{2}CHO\gt C_{6}H_{5}CHO\gt CH_{3}COCH_{3}}$$ $$\mathrm{CH_{3}COCH_{3}\gt C_{6}H_{5}COCH_{3}\gt C_{6}H_{5}COC_{6}H_{5}}$$

For substituted benzaldehydes: $\mathrm{4{-}NO_{2}\gt 4{-}Cl\gt H\gt 4{-}CH_{3}\gt 4{-}OCH_{3}}$, and among aliphatic aldehydes $\mathrm{Cl_{3}CCHO\gt ClCH_{2}CHO\gt CH_{3}CHO}$.

The cleanest evidence comes from the simplest nucleophilic addition, the addition of water. Aldehydes and ketones in water are in equilibrium with their hydrates (geminal diols), $\mathrm{R_{2}C{=}O+H_{2}O\rightleftharpoons R_{2}C(OH)_{2}}$, and the equilibrium constant $K_{\text{hyd}}=[\mathrm{R_{2}C(OH)_{2}}]/[\mathrm{R_{2}C{=}O}]$ (water's concentration taken into $K$) measures how favourable addition is. Approximate values at $298\ \mathrm{K}$:

Compound$K_{\text{hyd}}$% as hydrateWhat decides it
trichloroethanal, $\mathrm{Cl_{3}CCHO}$$2.8\times10^{4}$99.996strong $-I$ of $\mathrm{CCl_{3}}$ (chloral hydrate is a stable solid)
methanal, $\mathrm{HCHO}$$2.3\times10^{3}$99.96no electron-releasing group, no crowding
ethanal, $\mathrm{CH_{3}CHO}$$1.06$51.5one $+I$ group
2,2-dimethylpropanal, $\mathrm{(CH_{3})_{3}CCHO}$$0.23$18.7one bulky $+I$ group
benzaldehyde, $\mathrm{C_{6}H_{5}CHO}$$1.1\times10^{-2}$1.1ring conjugation ($+R$) lost on addition
propanone, $\mathrm{CH_{3}COCH_{3}}$$1.4\times10^{-3}$0.14two $+I$ groups and more crowding

The percentage follows from $\%\ \text{hydrate}=\dfrac{100\,K_{\text{hyd}}}{1+K_{\text{hyd}}}$. Across this table $K_{\text{hyd}}$ spans more than seven powers of ten — exactly the order of Rule 17.15. Interactive 1 lets you watch these equilibria.

✏️ Example 4 — Ranking reactivity
Arrange in decreasing order of reactivity towards nucleophilic addition, and give the reason for each order: (a) propanone, methanal, benzaldehyde, ethanal; (b) 4-methoxybenzaldehyde, 4-nitrobenzaldehyde, benzaldehyde, 4-methylbenzaldehyde; (c) $\mathrm{CH_{3}COCH_{3}}$, $\mathrm{CH_{3}COC(CH_{3})_{3}}$, $\mathrm{(CH_{3})_{3}CCOC(CH_{3})_{3}}$.
(a) methanal $\gt$ ethanal $\gt$ benzaldehyde $\gt$ propanone. Methanal has no $+I$ group and no crowding; ethanal has one methyl; in benzaldehyde the ring's $+R$ effect spreads the positive charge and the conjugation is lost on addition; propanone has two methyls (electronic and steric).
(b) 4-nitro $\gt$ H $\gt$ 4-methyl $\gt$ 4-methoxy. $\mathrm{NO_{2}}$ ($-R$, $-I$) pulls electrons out of the ring and from the CHO carbon; $\mathrm{CH_{3}}$ ($+I$, hyperconjugation) and especially $\mathrm{OCH_{3}}$ ($+R$ from para) push them in.
(c) $\mathrm{CH_{3}COCH_{3}\gt CH_{3}COC(CH_{3})_{3}\gt(CH_{3})_{3}CCOC(CH_{3})_{3}}$. The electronic effect of methyl and tert-butyl is similar; the difference is steric — a tert-butyl group badly crowds the tetrahedral product. Di-tert-butyl ketone does not even form a cyanohydrin.
Insight When electronic and steric effects point the same way, the order is clear-cut. In JEE Main they nearly always do — but in (c) only the steric effect differs.

Ethanal dissolves in water and reaches equilibrium with its hydrate, $\mathrm{CH_{3}CH(OH)_{2}}$. Roughly what fraction of it is present as the hydrate?

Choose ethanal: $K_{\text{hyd}}=1.06$ and the readout shows $51.5\ \%$ hydrate — about 26 of the 50 molecules in the box are diols at any moment, and they keep switching. Now try propanone: only $0.14\ \%$ (about 1 molecule in 700), and methanal: $99.96\ \%$. One methyl group brings the carbonyl carbon to a balance point; two methyl groups shift the equilibrium almost entirely back to the ketone.
Interactive 1 — Hydration Equilibrium: Electronic and Steric Control

Choose a carbonyl compound. The left panel shows its two groups and the partial positive charge on carbon (the bigger the red halo, the more electrophilic the carbon). The box on the right holds 50 molecules in water at equilibrium: red = $\mathrm{C{=}O}$ form, blue = hydrate $\mathrm{C(OH)_{2}}$. Press Play to see the equilibrium is dynamic — molecules keep adding and losing water while the numbers stay the same. The scale at the bottom places $K_{\text{hyd}}$ on a logarithmic axis.

$K_{\text{hyd}}$—
% as hydrate—
hydrate in the box—
groups on C=O—

Which compound is the most reactive towards nucleophilic addition of HCN?

Adding HCN, NaHSO₃, alcohols, Grignard reagents and ammonia derivatives

Each reaction below is Principle 17.14 with a different nucleophile. What changes is whether the adduct is stable, reversible, or loses water afterwards.

Hydrogen cyanide: cyanohydrins

Aldehydes and most ketones add $\mathrm{HCN}$ (generated from $\mathrm{NaCN}$ or $\mathrm{KCN}$ and acid, with a little base present) to give cyanohydrins, compounds with $\mathrm{{-}OH}$ and $\mathrm{{-}CN}$ on the same carbon:

$$\mathrm{CH_{3}COCH_{3}+HCN\xrightarrow{OH^{-}}(CH_{3})_{2}C(OH)CN}$$

(2-hydroxy-2-methylpropanenitrile). The reaction adds one carbon to the chain. Hydrolysis of the $\mathrm{{-}CN}$ group with aqueous acid then gives a 2-hydroxy acid: ethanal → $\mathrm{CH_{3}CH(OH)CN}$ → $\mathrm{CH_{3}CH(OH)COOH}$, 2-hydroxypropanoic acid (lactic acid), formed as a racemic mixture.

Sodium hydrogensulphite: bisulphite adducts

A saturated aqueous solution of $\mathrm{NaHSO_{3}}$ adds to aldehydes and to most methyl ketones; the sulphur atom is the nucleophile, and a proton moves to oxygen:

$$\mathrm{R_{2}C{=}O+NaHSO_{3}\rightleftharpoons R_{2}C(OH)SO_{3}^{-}Na^{+}}$$

The adduct is a crystalline salt, insoluble in the concentrated solution, so it can be filtered off. Because the addition is reversible, warming the adduct with dilute acid or with sodium carbonate solution gives the carbonyl compound back. This is used to separate and purify aldehydes from non-carbonyl impurities. The bulky hydrogensulphite ion is sensitive to crowding: the equilibrium lies on the right for most aldehydes and on the left for most ketones other than methyl ketones.

Alcohols: hemiacetals and acetals

📘 Definition 17.7 — Hemiacetal and acetal

A hemiacetal is the product of adding one molecule of an alcohol to a carbonyl group: one carbon carrying both $\mathrm{{-}OH}$ and $\mathrm{{-}OR}$, $\mathrm{R'CH(OH)OR}$. An acetal has two $\mathrm{{-}OR}$ groups on the same carbon, $\mathrm{R'CH(OR)_{2}}$ (from a ketone, $\mathrm{R'_{2}C(OR)_{2}}$, often called a ketal).

With dry hydrogen chloride as catalyst, an aldehyde adds one molecule of alcohol to form a hemiacetal; the acid then protonates the $\mathrm{{-}OH}$, water leaves, and a second alcohol molecule attacks the resulting cation to give the acetal:

$$\mathrm{CH_{3}CHO\xrightarrow[\text{dry HCl}]{\mathrm{C_{2}H_{5}OH}}CH_{3}CH(OH)OC_{2}H_{5}\xrightarrow[\text{dry HCl}]{\mathrm{C_{2}H_{5}OH}}CH_{3}CH(OC_{2}H_{5})_{2}+H_{2}O}$$

Every step is reversible. Removing water drives the reaction forward; adding aqueous acid reverses it, hydrolysing the acetal back to the carbonyl compound. Ketones react poorly with simple alcohols but readily with ethane-1,2-diol, which forms a five-membered ring (an ethylene ketal):

$$\mathrm{(CH_{3})_{2}C{=}O+HOCH_{2}CH_{2}OH\xrightarrow{\text{dry HCl}}(CH_{3})_{2}C(OCH_{2})_{2}+H_{2}O}$$

Acetals are stable to bases, Grignard reagents and hydride reducing agents, so turning a $\mathrm{C{=}O}$ group into an acetal protects it while another part of the molecule reacts; dilute aqueous acid removes the protection afterwards. In sugars, the ring forms of glucose and fructose are internal hemiacetals.

Grignard reagents: alcohols of every class

A Grignard reagent $\mathrm{RMgX}$ (made from a haloalkane and magnesium in dry ether) has a very polar $\mathrm{C^{\delta-}{-}Mg^{\delta+}}$ bond: its carbon acts as a carbanion-like nucleophile. It adds to the carbonyl carbon, forming a new $\mathrm{C{-}C}$ bond and a magnesium alkoxide, which dilute acid hydrolyses to the alcohol.

📐 Rule 17.16 — Alcohols from Grignard reagents
$$\mathrm{R_{2}'C{=}O+RMgX\xrightarrow{\text{dry ether}}R_{2}'C(R)OMgX\xrightarrow{H_{3}O^{+}}R_{2}'C(R)OH+Mg(OH)X}$$
  • Methanal gives a primary alcohol, $\mathrm{RCH_{2}OH}$ (one carbon longer than R).
  • Any other aldehyde $\mathrm{R'CHO}$ gives a secondary alcohol, $\mathrm{R'CH(OH)R}$.
  • A ketone $\mathrm{R'COR''}$ gives a tertiary alcohol, $\mathrm{R'R''C(OH)R}$.
  • Conditions: strictly dry, and no acidic hydrogen in the substrate. Water, alcohols, acids, terminal alkynes and $\mathrm{N{-}H}$ compounds destroy the reagent, $\mathrm{RMgX+H{-}OH\rightarrow R{-}H+Mg(OH)X}$: each acidic H uses up one mole of $\mathrm{RMgX}$ and releases one mole of the alkane $\mathrm{RH}$.

To plan a Grignard synthesis, look at the carbon carrying the $\mathrm{{-}OH}$ in the target. One of its carbon groups came from the Grignard reagent; the rest, together with that carbon, came from the carbonyl compound. A tertiary alcohol with three different groups can therefore be made in three ways.

✏️ Example 5 — Two routes to one alcohol
(a) Find every pair (carbonyl compound + Grignard reagent $\mathrm{RMgBr}$) that gives 2-methylbutan-2-ol, $\mathrm{(CH_{3})_{2}C(OH)CH_{2}CH_{3}}$. (b) In one route, $7.2\ \mathrm{g}$ of butan-2-one is treated with excess $\mathrm{CH_{3}MgBr}$ in dry ether and then dilute acid. With a 90 % yield, what mass of the alcohol is obtained? (c) Why would the yield fall badly if the ether were wet?
Work out (b), the mass of alcohol, before you open the solution:
(a) The carbinol carbon carries $\mathrm{CH_{3}}$, $\mathrm{CH_{3}}$ and $\mathrm{C_{2}H_{5}}$. If $\mathrm{C_{2}H_{5}}$ comes from the Grignard reagent, the ketone is $\mathrm{(CH_{3})_{2}CO}$: propanone + $\mathrm{C_{2}H_{5}MgBr}$. If a $\mathrm{CH_{3}}$ comes from it, the ketone is $\mathrm{CH_{3}COC_{2}H_{5}}$: butan-2-one + $\mathrm{CH_{3}MgBr}$. Two methyls are identical, so there are only 2 routes.
(b) $n(\mathrm{C_{4}H_{8}O})=7.2/72=0.10\ \mathrm{mol}$ → $0.10\ \mathrm{mol}$ alcohol in theory; with 90 %: $0.090\times88=7.92\ \mathrm{g}$.
(c) Water reacts with $\mathrm{CH_{3}MgBr}$ much faster than the ketone does, giving methane: $\mathrm{CH_{3}MgBr+H_{2}O\rightarrow CH_{4}+Mg(OH)Br}$. The reagent is used up before it can add to $\mathrm{C{=}O}$.
Check Atoms: $\mathrm{C_{4}H_{8}O}$ + $\mathrm{CH_{3}}$ + $\mathrm{H}$ (from $\mathrm{H_{3}O^{+}}$) $=\mathrm{C_{5}H_{12}O}$ ✓; Interactive 2 shows the same pair under "same alcohol also from".

You react benzaldehyde with $\mathrm{CH_{3}MgBr}$ and then dilute acid. Which other combination in the widget gives the same alcohol?

Choose benzaldehyde and CH₃MgBr: the readouts show 1-phenylethan-1-ol, a $2^{\circ}$ alcohol, $\mathrm{C_{8}H_{10}O}$, $M=122\ \mathrm{g\,mol^{-1}}$, and "same alcohol also from: ethanal + C₆H₅MgBr". The carbinol carbon carries H, $\mathrm{CH_{3}}$ and $\mathrm{C_{6}H_{5}}$; either carbon group may come from the Grignard reagent. Propanone + $\mathrm{C_{6}H_{5}MgBr}$ gives the $3^{\circ}$ alcohol 2-phenylpropan-2-ol, and methanal gives the $1^{\circ}$ alcohol phenylmethanol.
Interactive 2 — Grignard Synthesis Planner

Choose a carbonyl compound and a Grignard reagent, then press Play. The carbon group R (red) leaves magnesium and bonds to the carbonyl carbon; the $\mathrm{C{=}O}$ becomes $\mathrm{C{-}O^{-}\,{}^{+}MgBr}$; dilute acid then gives the alcohol. The readouts name the alcohol, give its class and molar mass ($\mathrm{C}=12$, $\mathrm{H}=1$, $\mathrm{O}=16$), and list any other pair in the menus that makes the same alcohol.

alcohol formed—
class—
formula, $M$—
same alcohol also from—

Ammonia and its derivatives: addition followed by elimination

Nitrogen nucleophiles of the type $\mathrm{H_{2}N{-}Z}$ add to the carbonyl group just as above, but the adduct (a carbinolamine, with $\mathrm{{-}OH}$ and $\mathrm{{-}NHZ}$ on one carbon) is unstable. It loses a molecule of water, and the final product contains a $\mathrm{C{=}N}$ double bond.

📘 Definition 17.8 — Addition–elimination (condensation) with $\mathrm{H_{2}N{-}Z}$
$$\mathrm{R_{2}C{=}O+H_{2}N{-}Z\rightleftharpoons R_{2}C{=}N{-}Z+H_{2}O}$$

Nucleophilic addition of the nitrogen to the carbonyl carbon is followed by elimination of water. The products are:

Reagent $\mathrm{H_{2}N{-}Z}$ZProduct $\mathrm{R_{2}C{=}N{-}Z}$$M$ of reagent
hydroxylamine$\mathrm{{-}OH}$oxime, $\mathrm{R_{2}C{=}NOH}$33
hydrazine$\mathrm{{-}NH_{2}}$hydrazone, $\mathrm{R_{2}C{=}NNH_{2}}$32
phenylhydrazine$\mathrm{{-}NHC_{6}H_{5}}$phenylhydrazone108
2,4-dinitrophenylhydrazine (2,4-DNP)$\mathrm{{-}NHC_{6}H_{3}(NO_{2})_{2}}$2,4-dinitrophenylhydrazone (yellow, orange or red solid)198
semicarbazide$\mathrm{{-}NHCONH_{2}}$semicarbazone, $\mathrm{R_{2}C{=}NNHCONH_{2}}$75
primary amine $\mathrm{R'NH_{2}}$$\mathrm{{-}R'}$imine (Schiff base), $\mathrm{R_{2}C{=}NR'}$—

Since water is lost, $M(\text{product})=M(\text{carbonyl})+M(\mathrm{H_{2}NZ})-18$.

The pH must be just right (about 4–5, often an ethanoate buffer). Acid is needed to protonate the carbonyl oxygen in the addition step and the $\mathrm{{-}OH}$ in the elimination step. But too much acid converts the nucleophile into $\mathrm{H_{3}N^{+}{-}Z}$, which has no lone pair and cannot attack. In strongly basic solution the $\mathrm{{-}OH}$ cannot be protonated and water does not leave.

Semicarbazide, $\mathrm{H_{2}N{-}NH{-}CO{-}NH_{2}}$, has three nitrogen atoms, but only the terminal $\mathrm{NH_{2}}$ farthest from $\mathrm{C{=}O}$ (N-1) reacts. The lone pairs on the other two nitrogens are delocalised into the $\mathrm{C{=}O}$ group by resonance (an amide), so they are poor nucleophiles.

Uses. These derivatives are crystalline solids with sharp melting points, used to identify aldehydes and ketones. The 2,4-DNP test, a yellow-to-red precipitate, shows that a $\mathrm{C{=}O}$ group is present (aldehyde or ketone) — the general test for a carbonyl group. Hydrazones are the intermediates of the Wolff–Kishner reduction (Section 17.4). Because $\mathrm{C{=}N}$ is a double bond, oximes and hydrazones of unsymmetrical carbonyl compounds ($\mathrm{RCHO}$ other than methanal, $\mathrm{RCOR'}$ with $\mathrm{R\ne R'}$) exist as two geometrical isomers.

Ammonia itself gives imines $\mathrm{R_{2}C{=}NH}$ that are unstable and react further. Methanal and ammonia give the cage compound hexamethylenetetramine (urotropine), used as a urinary antiseptic:

$$\mathrm{6HCHO+4NH_{3}\rightarrow(CH_{2})_{6}N_{4}+6H_{2}O}$$
✏️ Example 6 — JEE level: identifying a ketone from its reactions
A neutral compound X, $\mathrm{C_{4}H_{8}O}$, gives an orange precipitate with 2,4-DNP. With $\mathrm{CH_{3}MgBr}$ followed by dilute acid it gives a tertiary alcohol Y. With hydroxylamine X gives a mixture of two geometrically isomeric oximes. (a) Identify X and Y. (b) Why are the other carbonyl isomers of $\mathrm{C_{4}H_{8}O}$ ruled out? (c) What is the molar mass of the semicarbazone of X?
Find (c), the molar mass of the semicarbazone of X, before you open the solution:
Clues 2,4-DNP: X has a $\mathrm{C{=}O}$ group. The carbonyl isomers of $\mathrm{C_{4}H_{8}O}$ are butanal, 2-methylpropanal and butan-2-one. A tertiary alcohol from $\mathrm{CH_{3}MgBr}$ requires a ketone (Rule 17.16).
(a) X = butan-2-one, $\mathrm{CH_{3}COCH_{2}CH_{3}}$; Y = $\mathrm{(CH_{3})_{2}C(OH)CH_{2}CH_{3}}$, 2-methylbutan-2-ol.
(b) Butanal and 2-methylpropanal are aldehydes: with $\mathrm{CH_{3}MgBr}$ they give the $2^{\circ}$ alcohols pentan-2-ol and 3-methylbutan-2-ol. The two oximes fit too: butan-2-one is unsymmetrical ($\mathrm{CH_{3}}$ vs $\mathrm{C_{2}H_{5}}$), so $\mathrm{C{=}NOH}$ has two geometrical forms (the aldehydes would also give two, so this clue alone would not decide).
(c) $72+75-18=129\ \mathrm{g\,mol^{-1}}$ for $\mathrm{CH_{3}C(C_{2}H_{5}){=}NNHCONH_{2}}$, $\mathrm{C_{5}H_{11}N_{3}O}$.
Check $\mathrm{C_{5}H_{11}N_{3}O}$: $60+11+42+16=129$ ✓.
⚠️ JEE Main traps

1. Benzaldehyde is not "an aldehyde, so very reactive". Ring conjugation makes aromatic aldehydes less reactive than aliphatic ones: $\mathrm{CH_{3}CHO\gt C_{6}H_{5}CHO}$. It is still more reactive than propanone.

2. Wrong alcohol class from Grignard reagents. Only methanal gives a $1^{\circ}$ alcohol; every other aldehyde gives $2^{\circ}$; ketones give $3^{\circ}$. With a nitrile the product is a ketone, not an alcohol. Any O–H or N–H in the substrate consumes one extra mole of $\mathrm{RMgX}$.

3. Semicarbazide's reacting nitrogen. Only the terminal $\mathrm{NH_{2}}$ (not attached to $\mathrm{C{=}O}$) attacks; the product is $\mathrm{R_{2}C{=}N{-}NH{-}CO{-}NH_{2}}$.

4. "More acid is better". Formation of oximes, hydrazones and semicarbazones is fastest near pH 4–5; strong acid protonates the nitrogen nucleophile and stops the reaction.

5. Acetal conditions. Acetals form with dry HCl (water removed) and are hydrolysed by aqueous acid; they are stable to base. Forgetting the $-18$ (loss of water) is the commonest slip in molar-mass questions on derivatives.

Propanone reacts with semicarbazide in an ethanoate buffer (pH ≈ 4.5). The product is

Exercises

Use $\mathrm{C}=12$, $\mathrm{H}=1$, $\mathrm{N}=14$, $\mathrm{O}=16\ \mathrm{g\,mol^{-1}}$. "Isomers" means structural isomers unless a part says otherwise.

I
Structure, names and physical properties.
  • 1 How many σ bonds and how many π bonds are there in propanal, $\mathrm{CH_{3}CH_{2}CHO}$? State the hybridisation of each carbon atom.
  • 2 Give IUPAC names: (a) $\mathrm{CH_{3}CH_{2}CH(CH_{3})CHO}$; (b) $\mathrm{CH_{3}COCH(CH_{3})_{2}}$; (c) $\mathrm{C_{6}H_{5}CH{=}CHCHO}$; (d) $\mathrm{CH_{3}COCH_{2}COCH_{3}}$.
  • 3 Draw condensed structures of: (a) 4-methylpentan-2-one; (b) cyclohexanecarbaldehyde; (c) 2-hydroxypropanal; (d) 1,3-diphenylpropan-2-one.
  • 4 How many aldehydes and ketones have the formula $\mathrm{C_{4}H_{8}O}$? Name them.
  • 5 How many ketones have the formula $\mathrm{C_{6}H_{12}O}$?
  • 6 Arrange in order of increasing boiling point and explain: ethanal, ethanol, propane, methoxymethane.
  • 7 Propanone mixes with water in all proportions, but hexan-2-one is only slightly soluble. Explain both facts.
  • 8 Calculate the percentage by mass of oxygen in propanone.
1 Bonds: 2 C–C, 6 C–H, and C=O (one σ + one π). So 9 σ and 1 π. C-1 (CHO) is $sp^{2}$; C-2 and C-3 are $sp^{3}$.
2 (a) 2-methylbutanal; (b) 3-methylbutan-2-one; (c) 3-phenylprop-2-enal (cinnamaldehyde); (d) pentane-2,4-dione.
3 (a) $\mathrm{CH_{3}COCH_{2}CH(CH_{3})_{2}}$; (b) $\mathrm{C_{6}H_{11}{-}CHO}$ (CHO on a cyclohexane ring); (c) $\mathrm{CH_{3}CH(OH)CHO}$; (d) $\mathrm{C_{6}H_{5}CH_{2}COCH_{2}C_{6}H_{5}}$.
4 3: butanal, 2-methylpropanal, butan-2-one.
5 $\mathrm{CH_{3}CO{-}C_{4}H_{9}}$ with four butyl groups: hexan-2-one, 4-methylpentan-2-one, 3-methylpentan-2-one, 3,3-dimethylbutan-2-one; $\mathrm{C_{2}H_{5}CO{-}C_{3}H_{7}}$ with two propyl groups: hexan-3-one, 2-methylpentan-3-one. Total 6.
6 propane ($231\ \mathrm{K}$) $\lt$ methoxymethane ($249\ \mathrm{K}$) $\lt$ ethanal ($293\ \mathrm{K}$) $\lt$ ethanol ($351\ \mathrm{K}$). All have $M=44$–$46$; dispersion only $\lt$ weak dipole $\lt$ strong $\mathrm{C{=}O}$ dipole $\lt$ hydrogen bonding.
7 The carbonyl oxygen accepts hydrogen bonds from water; in propanone this outweighs the small hydrocarbon part. In hexan-2-one the long hydrophobic chain disrupts the hydrogen-bonded structure of water more than one $\mathrm{C{=}O}$ can compensate.
8 $\dfrac{16}{58}\times100=27.6\ \%$.
II
Preparation.
  • 1 Give the organic product, if any: (a) propan-1-ol + PCC in $\mathrm{CH_{2}Cl_{2}}$; (b) propan-2-ol + acidified $\mathrm{K_{2}Cr_{2}O_{7}}$; (c) 2-methylpropan-2-ol + PCC.
  • 2 3-Methylpent-2-ene, $\mathrm{CH_{3}CH{=}C(CH_{3})CH_{2}CH_{3}}$, is ozonised and worked up with Zn/H₂O. Name the products and give the molar mass of the ketone.
  • 3 An alkene $\mathrm{C_{5}H_{10}}$ gives methanal and 2-methylpropanal on ozonolysis. Identify it.
  • 4 Write the Rosenmund reduction of benzoyl chloride. Why is the palladium catalyst poisoned?
  • 5 Ethanenitrile ($4.1\ \mathrm{g}$) is converted into ethanal by the Stephen reaction with an 80 % yield. Give the reagents and the mass of ethanal.
  • 6 Benzonitrile is treated with $\mathrm{C_{2}H_{5}MgBr}$ in dry ether and the product hydrolysed. Name the product and give its molar mass.
  • 7 In an Etard reaction $9.2\ \mathrm{g}$ of methylbenzene gives benzaldehyde in 75 % yield. What mass of benzaldehyde is obtained?
  • 8 Show how benzophenone is made from benzene. Why does the reaction stop after one acyl group has entered the ring?
  • 9 Ethyne gives ethanal, but propyne gives propanone (not propanal), with $\mathrm{HgSO_{4}}$ in dilute $\mathrm{H_{2}SO_{4}}$. Explain.
1 (a) propanal, $\mathrm{CH_{3}CH_{2}CHO}$ (PCC stops at the aldehyde); (b) propanone; (c) no reaction — a $3^{\circ}$ alcohol has no H on the carbinol carbon.
2 Cut at $\mathrm{C{=}C}$: $\mathrm{CH_{3}CHO}$ (ethanal) + $\mathrm{O{=}C(CH_{3})CH_{2}CH_{3}}$ (butan-2-one, $\mathrm{C_{4}H_{8}O}$, $M=72\ \mathrm{g\,mol^{-1}}$).
3 Join $\mathrm{CH_{2}{=}}$ and $\mathrm{{=}CHCH(CH_{3})_{2}}$: $\mathrm{CH_{2}{=}CHCH(CH_{3})_{2}}$, 3-methylbut-1-ene.
4 $\mathrm{C_{6}H_{5}COCl+H_{2}\xrightarrow{Pd{-}BaSO_{4}}C_{6}H_{5}CHO+HCl}$. Unpoisoned palladium would go on to reduce the aldehyde to phenylmethanol; sulphur or quinoline lowers its activity so that only the $\mathrm{C{-}Cl}$ bond is reduced.
5 $\mathrm{SnCl_{2}/HCl}$, then $\mathrm{H_{3}O^{+}}$. $n(\mathrm{CH_{3}CN})=4.1/41=0.10\ \mathrm{mol}$; ethanal $=0.10\times0.80\times44=3.52\ \mathrm{g}$.
6 $\mathrm{C_{6}H_{5}CN\rightarrow C_{6}H_{5}C(C_{2}H_{5}){=}NMgBr\rightarrow C_{6}H_{5}COC_{2}H_{5}}$, 1-phenylpropan-1-one, $\mathrm{C_{9}H_{10}O}$: $108+10+16=134\ \mathrm{g\,mol^{-1}}$.
7 $n=9.2/92=0.10\ \mathrm{mol}$; benzaldehyde $=0.10\times0.75\times106=7.95\ \mathrm{g}$.
8 $\mathrm{C_{6}H_{6}+C_{6}H_{5}COCl\xrightarrow{\text{anhyd. AlCl}_3}C_{6}H_{5}COC_{6}H_{5}+HCl}$. The $\mathrm{C{=}O}$ group withdraws electrons from the ring it is attached to, and it also binds $\mathrm{AlCl_{3}}$, so the product is far less reactive than benzene.
9 Water adds by Markovnikov's rule: in propyne the OH goes to C-2, giving the enol $\mathrm{CH_{3}C(OH){=}CH_{2}}$, which tautomerises to the ketone. In ethyne both carbons are equivalent and the enol $\mathrm{CH_{2}{=}CHOH}$ gives ethanal.
III
Mechanism and reactivity.
  • 1 Arrange in decreasing reactivity towards HCN: propanal, butan-2-one, methanal, 1-phenylethan-1-one.
  • 2 Arrange in decreasing reactivity towards nucleophilic addition: 4-chlorobenzaldehyde, 4-nitrobenzaldehyde, 4-methoxybenzaldehyde, benzaldehyde.
  • 3 Arrange in decreasing reactivity: $\mathrm{CH_{3}CHO}$, $\mathrm{Cl_{3}CCHO}$, $\mathrm{ClCH_{2}CHO}$, $\mathrm{Cl_{2}CHCHO}$.
  • 4 By how many degrees (approximately) does each bond angle at the carbonyl carbon close when it becomes tetrahedral in the addition product?
  • 5 Ethanal reacts with HCN. How many stereoisomers are formed, and in what ratio? How many stereoisomers form from propanone?
  • 6 $K_{\text{hyd}}$ of ethanal is $1.06$. Calculate the percentage of ethanal present as its hydrate at equilibrium.
  • 7 A ketone has $K_{\text{hyd}}=4.0\times10^{-3}$. What percentage is hydrated at equilibrium?
  • 8 Explain (a) why a trace of base speeds up the addition of HCN, and (b) why a trace of acid speeds up the addition of alcohols.
1 methanal $\gt$ propanal $\gt$ butan-2-one $\gt$ 1-phenylethan-1-one (no alkyl group; one; two; and in the last one group is a conjugating ring).
2 4-nitro $\gt$ 4-chloro $\gt$ benzaldehyde $\gt$ 4-methoxy. Cl is $-I$ (stronger than its $+R$); $\mathrm{OCH_{3}}$ is strongly $+R$.
3 $\mathrm{Cl_{3}CCHO\gt Cl_{2}CHCHO\gt ClCH_{2}CHO\gt CH_{3}CHO}$: each chlorine adds $-I$ withdrawal.
4 From $120^\circ$ to about $109.5^\circ$: by about $10.5^\circ$. The groups are pushed closer together — the origin of the steric effect.
5 $\mathrm{CH_{3}CH(OH)CN}$ has a stereocentre; attack on the two faces is equally likely, so 2 enantiomers form in a 1 : 1 ratio (racemic). Propanone cyanohydrin, $\mathrm{(CH_{3})_{2}C(OH)CN}$, has two identical methyls: no stereocentre, 1 product.
6 $\dfrac{100\times1.06}{2.06}=51.5\ \%$.
7 $\dfrac{100\times0.0040}{1.0040}=0.40\ \%$.
8 (a) Base converts HCN into $\mathrm{CN^{-}}$, a far stronger nucleophile, for the slow first step. (b) Acid protonates the carbonyl oxygen, so the carbon becomes much more positive and a weak neutral nucleophile can attack it.
IV
HCN, NaHSO₃, alcohols, Grignard reagents and ammonia derivatives.
  • 1 Ethanal is treated with excess methanol and dry HCl. Give the hemiacetal and the acetal, and the molar mass of the acetal.
  • 2 Propanone is protected with ethane-1,2-diol (dry HCl). Give the product and its molar mass. How is the protecting group removed?
  • 3 Give the product and its class after hydrolysis: (a) $\mathrm{C_{2}H_{5}MgBr}$ + methanal; (b) $\mathrm{CH_{3}MgBr}$ + benzaldehyde; (c) $\mathrm{C_{6}H_{5}MgBr}$ + propanone; (d) $\mathrm{CH_{3}MgBr}$ + ethanenitrile.
  • 4 In how many ways (carbonyl compound + Grignard reagent) can 3-methylpentan-3-ol, $\mathrm{(C_{2}H_{5})_{2}C(OH)CH_{3}}$, be made?
  • 5 $5.8\ \mathrm{g}$ of propanone is treated with excess $\mathrm{CH_{3}MgBr}$ and the product hydrolysed (80 % yield). Find the mass of 2-methylpropan-2-ol obtained.
  • 6 Give the structure and the molar mass of the semicarbazone of propanone.
  • 7 What is the molar mass of the 2,4-dinitrophenylhydrazone of methanal?
  • 8 Why is the reaction of propanone with hydroxylamine slow both at pH 1 and at pH 12, but fast near pH 4.5?
  • 9 How many moles of methanal are needed per mole of urotropine, $\mathrm{(CH_{2})_{6}N_{4}}$? What mass of urotropine can be made from $9.0\ \mathrm{g}$ of methanal and excess ammonia?
1 Hemiacetal $\mathrm{CH_{3}CH(OH)OCH_{3}}$ (1-methoxyethan-1-ol); acetal $\mathrm{CH_{3}CH(OCH_{3})_{2}}$ (1,1-dimethoxyethane), $\mathrm{C_{4}H_{10}O_{2}}$: $48+10+32=90\ \mathrm{g\,mol^{-1}}$.
2 The cyclic ketal $\mathrm{(CH_{3})_{2}C(OCH_{2})_{2}}$ (2,2-dimethyl-1,3-dioxolane), $\mathrm{C_{5}H_{10}O_{2}}$, $M=102\ \mathrm{g\,mol^{-1}}$. Warming with dilute aqueous acid hydrolyses it back to propanone and the diol.
3 (a) propan-1-ol, $1^{\circ}$; (b) 1-phenylethan-1-ol, $2^{\circ}$; (c) 2-phenylpropan-2-ol, $3^{\circ}$; (d) propanone — a ketone, not an alcohol (the imine salt is hydrolysed).
4 The carbinol carbon has $\mathrm{C_{2}H_{5}}$, $\mathrm{C_{2}H_{5}}$, $\mathrm{CH_{3}}$: butan-2-one + $\mathrm{C_{2}H_{5}MgBr}$, or pentan-3-one + $\mathrm{CH_{3}MgBr}$ — 2 ways.
5 $n=5.8/58=0.10\ \mathrm{mol}$; $0.10\times0.80\times74=5.92\ \mathrm{g}$.
6 $\mathrm{(CH_{3})_{2}C{=}N{-}NH{-}CO{-}NH_{2}}$, $\mathrm{C_{4}H_{9}N_{3}O}$: $58+75-18=115\ \mathrm{g\,mol^{-1}}$.
7 $30+198-18=210\ \mathrm{g\,mol^{-1}}$ ($\mathrm{C_{7}H_{6}N_{4}O_{4}}$: $84+6+56+64=210$ ✓).
8 At pH 1 almost all the hydroxylamine is protonated, $\mathrm{H_{3}N^{+}OH}$, and has no free lone pair. At pH 12 there is no acid to protonate the carbonyl oxygen or the $\mathrm{{-}OH}$ of the carbinolamine, so water cannot leave. Near pH 4.5 enough free nucleophile and enough acid are both present.
9 $6\mathrm{HCHO}+4\mathrm{NH_{3}}\rightarrow\mathrm{(CH_{2})_{6}N_{4}}+6\mathrm{H_{2}O}$: 6 mol per mol. $n(\mathrm{HCHO})=9.0/30=0.30\ \mathrm{mol}$ → $0.050\ \mathrm{mol}$ of $\mathrm{C_{6}H_{12}N_{4}}$ ($M=140$) $=7.0\ \mathrm{g}$.
🎯 Exam corner JEE Main · MCQJEE Main · Numerical

E1. JEE Main · MCQ The correct order of reactivity towards nucleophilic addition is (A) $\mathrm{C_{6}H_{5}CHO\gt CH_{3}CHO\gt HCHO\gt CH_{3}COCH_{3}}$ (B) $\mathrm{HCHO\gt CH_{3}CHO\gt C_{6}H_{5}CHO\gt CH_{3}COCH_{3}}$ (C) $\mathrm{HCHO\gt C_{6}H_{5}CHO\gt CH_{3}CHO\gt CH_{3}COCH_{3}}$ (D) $\mathrm{CH_{3}COCH_{3}\gt C_{6}H_{5}CHO\gt CH_{3}CHO\gt HCHO}$

Idea Fewer electron-releasing groups and less crowding mean a more reactive carbonyl carbon. Methanal (none) $\gt$ ethanal (one $+I$) $\gt$ benzaldehyde (ring $+R$) $\gt$ propanone (two $+I$, more crowded).
Answer (B).
⏱ Shortcut (C) is the usual trap — "aromatic ring = electron-withdrawing". For the CHO group, conjugation with the ring releases electrons by resonance.

E2. JEE Main · Numerical Propanone reacts with 2,4-dinitrophenylhydrazine to give an orange precipitate. What is the molar mass of the product in $\mathrm{g\,mol^{-1}}$? ($\mathrm{C}=12$, $\mathrm{H}=1$, $\mathrm{N}=14$, $\mathrm{O}=16$.) Give the answer to the nearest integer.

Reaction $\mathrm{(CH_{3})_{2}C{=}O+H_{2}NNHC_{6}H_{3}(NO_{2})_{2}\rightarrow(CH_{3})_{2}C{=}NNHC_{6}H_{3}(NO_{2})_{2}+H_{2}O}$.
Mass 2,4-DNP is $\mathrm{C_{6}H_{6}N_{4}O_{4}}$, $M=198$. Product: $58+198-18=238$ ($\mathrm{C_{9}H_{10}N_{4}O_{4}}$: $108+10+56+64=238$ ✓).
Answer $238$.

E3. JEE Main · MCQ Which combination, followed by hydrolysis with dilute acid, will not give 2-phenylbutan-2-ol, $\mathrm{C_{6}H_{5}C(OH)(CH_{3})CH_{2}CH_{3}}$? (A) $\mathrm{C_{6}H_{5}MgBr}$ + butan-2-one (B) $\mathrm{C_{2}H_{5}MgBr}$ + 1-phenylethan-1-one (C) $\mathrm{CH_{3}MgBr}$ + 1-phenylpropan-1-one (D) $\mathrm{CH_{3}MgBr}$ + 1-phenylpropan-2-one

Idea The carbinol carbon of the target carries $\mathrm{C_{6}H_{5}}$, $\mathrm{CH_{3}}$, $\mathrm{C_{2}H_{5}}$. Any one may come from $\mathrm{RMgBr}$, the other two from the ketone: (A), (B), (C) all work.
Check (D) 1-Phenylpropan-2-one is $\mathrm{C_{6}H_{5}CH_{2}COCH_{3}}$; with $\mathrm{CH_{3}MgBr}$ it gives $\mathrm{C_{6}H_{5}CH_{2}C(OH)(CH_{3})_{2}}$, 2-methyl-1-phenylpropan-2-ol — the phenyl is on the wrong carbon.
Answer (D).

E4. JEE Main · Numerical Each of the following is followed by hydrolysis with dilute acid: (i) $\mathrm{CH_{3}MgBr}$ + HCHO; (ii) $\mathrm{CH_{3}MgBr}$ + $\mathrm{CH_{3}COCH_{3}}$; (iii) $\mathrm{C_{2}H_{5}MgBr}$ + $\mathrm{CH_{3}CHO}$; (iv) $\mathrm{C_{6}H_{5}MgBr}$ + $\mathrm{C_{6}H_{5}COCH_{3}}$; (v) $\mathrm{CH_{3}MgBr}$ + $\mathrm{CH_{3}CN}$; (vi) $\mathrm{C_{2}H_{5}MgBr}$ + cyclohexanone; (vii) $\mathrm{CH_{3}MgBr}$ + $\mathrm{C_{6}H_{5}CHO}$. How many of them give a tertiary alcohol? Give the answer to the nearest integer.

Sort Ketones give $3^{\circ}$: (ii) 2-methylpropan-2-ol, (iv) 1,1-diphenylethan-1-ol, (vi) 1-ethylcyclohexan-1-ol. Methanal gives $1^{\circ}$ (i); other aldehydes give $2^{\circ}$ (iii), (vii); the nitrile (v) gives a ketone.
Answer $3$.

E5. JEE Main · MCQ Which conversion is not correctly matched with its reagents? (A) $\mathrm{C_{6}H_{6}\rightarrow C_{6}H_{5}CHO}$: $\mathrm{CH_{3}COCl}$, anhydrous $\mathrm{AlCl_{3}}$ (B) $\mathrm{C_{6}H_{5}COCl\rightarrow C_{6}H_{5}CHO}$: $\mathrm{H_{2}}$, $\mathrm{Pd{-}BaSO_{4}}$ (C) $\mathrm{CH_{3}CN\rightarrow CH_{3}CHO}$: $\mathrm{SnCl_{2}/HCl}$, then $\mathrm{H_{3}O^{+}}$ (D) $\mathrm{C_{6}H_{5}CH_{3}\rightarrow C_{6}H_{5}CHO}$: $\mathrm{CrO_{2}Cl_{2}}$ in $\mathrm{CS_{2}}$, then $\mathrm{H_{3}O^{+}}$

Check (B) Rosenmund, (C) Stephen, (D) Etard — all correct. Friedel–Crafts acylation with ethanoyl chloride puts on $\mathrm{COCH_{3}}$, giving 1-phenylethan-1-one, not benzaldehyde (that needs CO + HCl, Gattermann–Koch).
Answer (A).

E6. JEE Main · Numerical One mole of 4-hydroxybutan-2-one, $\mathrm{HOCH_{2}CH_{2}COCH_{3}}$, is treated with excess $\mathrm{CH_{3}MgBr}$ in dry ether, and the mixture is then hydrolysed. How many moles of $\mathrm{CH_{3}MgBr}$ are consumed? Give the answer to the nearest integer.

Acidic H The O–H proton destroys one mole: $\mathrm{ROH+CH_{3}MgBr\rightarrow ROMgBr+CH_{4}}$ (1 mol methane evolved).
Carbonyl The ketone group adds a second mole; after hydrolysis the product is $\mathrm{(CH_{3})_{2}C(OH)CH_{2}CH_{2}OH}$, 3-methylbutane-1,3-diol.
Answer $2$.
⏱ Shortcut Moles of $\mathrm{RMgX}$ used = (number of acidic H: O–H, N–H, ≡C–H) + (number of aldehyde/ketone groups).
🔬 Research–Teaching NexusResearch-tutored · optional, about 45 minutes

Research question. Can two simple ideas — electron release by the groups on carbon and crowding around it — predict how far water adds to any aldehyde or ketone?

Why it matters. Reversible addition to a carbonyl group is everywhere: formaldehyde-based fixatives cross-link proteins in pathology labs and vaccine production; sugars exist mainly as cyclic hemiacetals; and several modern drugs carry an "activated" ketone that a nucleophile in the target enzyme adds to reversibly. Medicinal chemists tune that reactivity with exactly the effects of Rule 17.15.

What to do.

  1. Collect published hydration constants $K_{\text{hyd}}$ at about $298\ \mathrm{K}$ for 10–12 aldehydes and ketones (data handbooks and review articles list them), including the six in this section.
  2. Give each compound a simple score: $-1$ for each alkyl group on the carbonyl carbon, $-1.5$ for a conjugated aryl group, $+1$ for each halogen on the α-carbon.
  3. Plot $\log_{10}K_{\text{hyd}}$ against your score. Is the trend straight? Fit a line.
  4. Use the line to predict two compounds you left out, then compare with their measured values.
  5. Identify the outliers and explain them (look especially at small-ring ketones).

Tools: A spreadsheet or plotting tool; a chemistry data handbook or an open chemical database.

Hand in: Your table, the graph with its fitted line, the two predictions, and one paragraph on which effect (electronic or steric) your data suggest matters more.

Going further. Repeat the analysis with equilibrium constants for cyanohydrin formation. Are the two series correlated? Why might the larger nucleophile be more sensitive to crowding?

Instructor note: $\log_{10}K_{\text{hyd}}$ runs from about $+4.4$ (trichloroethanal) to about $-2.9$ (propanone), and a crude group count captures most of the spread. Cyclopropanone and cyclobutanone are strong positive outliers: their ring angles are already far below $120^\circ$, so becoming tetrahedral relieves strain. Benzaldehyde falls below simple aliphatic aldehydes because conjugation is lost on addition.

🧪 Self-check quiz

0/5 correct

Q1. During nucleophilic addition to a carbonyl group, the hybridisation of the carbonyl carbon changes from

Q2. Benzoyl chloride is converted into benzaldehyde by

Q3. Which compound gives a tertiary alcohol with $\mathrm{C_{2}H_{5}MgBr}$ followed by dilute acid?

Q4. The product of ethanal with hydroxylamine (pH ≈ 4.5) is

Q5. Sodium hydrogensulphite addition is mainly used to