8.1 Rate of Reaction, Rate Law, Order and Molecularity
Thermodynamics tells us whether a reaction can go; kinetics tells us how fast it goes. Here we define the rate of a reaction precisely, write it as a rate law $r=k[\mathrm{A}]^{x}[\mathrm{B}]^{y}$, learn to read the order and the units of $k$, find the law from experiments, and see how a mechanism of elementary steps explains it.
A diamond is thermodynamically unstable: at room temperature and pressure it "should" turn into graphite, and the Gibbs energy change for the conversion is negative. Yet diamonds last for millions of years. A mixture of hydrogen and oxygen can sit in a balloon for weeks without any sign of water — and then explode in a fraction of a second when a spark is applied. Iron rusts over months, milk turns sour in a day or two, the precipitate of silver chloride appears the moment the two solutions are mixed. Whether a change can happen is decided by $\Delta G$ (Section 4.3); how fast it happens is a separate question, and the branch of chemistry that answers it is chemical kinetics.
Kinetics matters wherever time matters. A drug company must know how long a tablet keeps its strength; a fertiliser plant must make ammonia fast enough to pay for the plant; an atmospheric chemist must know how quickly a pollutant is destroyed; a cook relies on the fact that a pressure cooker speeds up the reactions that soften food. In this section we define the rate of a reaction exactly, list the factors that change it, express the dependence on concentration as a rate law with a rate constant and an order, find the rate law from experiments, and finally look inside the reaction: the sequence of elementary steps (the mechanism) and the slow step that controls the overall rate. Section 8.2 integrates the rate laws to give concentration as a function of time, and Section 8.3 deals with temperature. You need molar concentration from Section 5.1 and balanced equations from Section 1.3.
Notation: $[\mathrm{X}]$ is the molar concentration of X in $\mathrm{mol\,L^{-1}}$ at the time considered; $[\mathrm{X}]_{0}$ is its initial value. For gases, partial pressures (bar or atm) may be used instead of concentrations. Rates are in $\mathrm{mol\,L^{-1}\,s^{-1}}$ (or per minute, per hour) unless stated.
Rate of a reaction
For a simple change $\mathrm{R}\rightarrow\mathrm{P}$, the natural measure of speed is how quickly the reactant is used up, or how quickly the product appears. Because the volume of the vessel would otherwise enter the answer, we measure amounts as concentrations. If the concentration of R falls from $[\mathrm{R}]_{1}$ at time $t_{1}$ to $[\mathrm{R}]_{2}$ at $t_{2}$, the change $\Delta[\mathrm{R}]=[\mathrm{R}]_{2}-[\mathrm{R}]_{1}$ is negative, so a minus sign is put in front to make the rate a positive number:
$$\text{rate of disappearance of R}=-\frac{\Delta[\mathrm{R}]}{\Delta t},$$ $$\text{rate of appearance of P}=+\frac{\Delta[\mathrm{P}]}{\Delta t}.$$The rate is almost never constant. As the reactant is consumed, its molecules meet less often and the reaction slows down; a plot of $[\mathrm{R}]$ against $t$ is a curve that becomes flatter and flatter, while $[\mathrm{P}]$ rises steeply at first and then levels off. A ratio $\Delta[\mathrm{R}]/\Delta t$ over a finite interval therefore gives only an average over that interval. To describe the rate at one instant we shrink the interval to zero, exactly as speed at an instant is found from distance and time.
For $\mathrm{R}\rightarrow\mathrm{P}$, the average rate over the interval from $t$ to $t+\Delta t$ is
$$r_{\text{av}}=-\frac{\Delta[\mathrm{R}]}{\Delta t}=\frac{\Delta[\mathrm{P}]}{\Delta t},$$minus the slope of the secant joining two points of the $[\mathrm{R}]$–$t$ curve. The instantaneous rate at time $t$ is the limit of the average rate as $\Delta t\to0$:
$$r=-\frac{d[\mathrm{R}]}{dt}=\frac{d[\mathrm{P}]}{dt},$$minus the slope of the tangent to the $[\mathrm{R}]$–$t$ curve at $t$ (or the slope of the tangent to the $[\mathrm{P}]$–$t$ curve). The rate at $t=0$ is the initial rate. Units: concentration per unit time, $\mathrm{mol\,L^{-1}\,s^{-1}}$ (or $\mathrm{mol\,L^{-1}\,min^{-1}}$); for gases followed by pressure, $\mathrm{bar\,s^{-1}}$ or $\mathrm{atm\,s^{-1}}$.
Several species, one rate. In $\mathrm{N_{2}(g)+3H_{2}(g)\rightarrow2NH_{3}(g)}$ hydrogen is used up three times as fast as nitrogen, and ammonia appears twice as fast as nitrogen disappears. Each of these three "rates" is correct for its own species, but they differ. To get a single number that belongs to the reaction, divide each rate by the stoichiometric coefficient of that species:
For a reaction $a\mathrm{A}+b\mathrm{B}\rightarrow c\mathrm{C}+d\mathrm{D}$ taking place at constant volume, the rate of reaction is
$$r=-\frac{1}{a}\frac{d[\mathrm{A}]}{dt}=-\frac{1}{b}\frac{d[\mathrm{B}]}{dt}$$ $$\phantom{r}=+\frac{1}{c}\frac{d[\mathrm{C}]}{dt}=+\frac{1}{d}\frac{d[\mathrm{D}]}{dt}.$$Minus signs for reactants (their concentrations fall), plus signs for products. The rate of reaction depends on how the equation is written: doubling all coefficients halves $r$, although no rate of change of any concentration is altered. So always quote the equation together with the rate. The same relations hold for average rates.
The rule follows directly from stoichiometry: while the reaction advances by $x\ \mathrm{mol\,L^{-1}}$ (one "equation's worth" per litre, scaled by $x$), A falls by $ax$, B by $bx$, C rises by $cx$ and D by $dx$. Dividing each change by its coefficient gives the same number $x$ for every species, and so the same rate $dx/dt$.
Gases followed by pressure. At constant temperature and volume the partial pressure of a gas is proportional to its concentration ($p=[\mathrm{X}]RT$), so the rate can be written as $-\dfrac{1}{a}\dfrac{dp_{\mathrm{A}}}{dt}$ in $\mathrm{bar\,s^{-1}}$. If the number of gas molecules changes, the total pressure changes too, and its rate of change is fixed by $\Delta n_{g}$ of the equation: for $2\mathrm{N_{2}O_{5}(g)}\rightarrow4\mathrm{NO_{2}(g)}+\mathrm{O_{2}(g)}$, every $2$ molecules consumed give $5$, so $\dfrac{dp_{\text{total}}}{dt}=\dfrac{3}{2}\left(-\dfrac{dp_{\mathrm{N_{2}O_{5}}}}{dt}\right)$.
| $t$ / min | 0 | 10 | 20 | 30 | 40 |
|---|---|---|---|---|---|
| $[\mathrm{H_{2}O_{2}}]$ / $\mathrm{mol\,L^{-1}}$ | 0.800 | 0.566 | 0.400 | 0.283 | 0.200 |
In the rate explorer keep the instant at $t=20$ min and let the interval $\Delta t$ shrink from $20$ min to $1$ min. What happens to the average rate (the secant)?
For $\mathrm{N_{2}(g)+3H_{2}(g)\rightarrow2NH_{3}(g)}$, hydrogen is consumed at $0.030\ \mathrm{mol\,L^{-1}\,s^{-1}}$. Ammonia is formed at
What the rate depends on: the rate law
Before we write any equation, it helps to list what experiments show changes the rate of a given reaction. Behind all of them lies one picture: molecules must collide, and only collisions with enough energy and the right orientation lead to products (Section 8.3).
- Nature of the reactants. Reactions of ions in solution that only need oppositely charged ions to meet ($\mathrm{Ag^{+}(aq)+Cl^{-}(aq)\rightarrow AgCl(s)}$) are almost instantaneous; reactions that must break strong covalent bonds (the rusting of iron, the burning of a candle at room temperature) are slow.
- Concentration. More molecules per litre means more collisions per second, so in most reactions the rate rises with the concentration of the reactants. How strongly it rises is described by the rate law below.
- Pressure (gaseous reactions). Compressing a gas mixture at constant temperature raises every concentration in the same proportion ($[\mathrm{X}]=p_{\mathrm{X}}/RT$), so it speeds up a gaseous reaction for exactly the same reason. Pressure has almost no effect on reactions in solution.
- Temperature. For many reactions near room temperature the rate roughly doubles for a $10\ \mathrm{K}$ rise — far more than the small rise in collision frequency, because a larger fraction of collisions now has enough energy. This is treated quantitatively (Arrhenius equation) in Section 8.3.
- Catalyst. A catalyst is a substance that increases the rate of a reaction without itself being used up; it opens a different pathway with a lower energy barrier. It takes part in the steps but is regenerated, so it appears unchanged at the end. It speeds up the forward and backward reactions equally, so it does not change $\Delta G$, the equilibrium constant or the position of equilibrium — the equilibrium is only reached sooner.
- Surface area and radiation. A powdered solid reacts faster than a lump (more surface exposed); some reactions are started or accelerated by light (photochemical reactions such as $\mathrm{H_{2}+Cl_{2}}$ in sunlight).
Of these, the effect of concentration is the one we can write as a simple law. Experiment shows that, at a fixed temperature, the rate is usually proportional to the concentrations of the reactants raised to small powers. These powers are found by experiment and need not be the stoichiometric coefficients.
For a reaction $a\mathrm{A}+b\mathrm{B}\rightarrow\text{products}$, the rate law (rate equation) is the experimentally determined expression
$$r=k\,[\mathrm{A}]^{x}\,[\mathrm{B}]^{y},$$which gives the rate in terms of the concentrations. The proportionality constant $k$ is the rate constant (specific reaction rate): it equals the rate when every concentration in the rate law is $1\ \mathrm{mol\,L^{-1}}$. For a given reaction $k$ depends on the temperature and on the presence of a catalyst, but not on the concentrations. The exponents $x$ and $y$ are found by experiment; in general $x\ne a$ and $y\ne b$.
In the rate law $r=k[\mathrm{A}]^{x}[\mathrm{B}]^{y}$, the exponent $x$ is the order with respect to A and $y$ the order with respect to B. The overall order of the reaction is the sum $n=x+y$.
Orders are experimental quantities. They may be $0,\ 1,\ 2,\ 3$, fractional ($\tfrac12,\ \tfrac32$) or even negative (a product or another substance that slows the reaction). A reaction whose rate does not obey a simple power law has no defined order.
Some real rate laws show how little the balanced equation tells you:
| Reaction | Experimental rate law | Order |
|---|---|---|
| $\mathrm{2N_{2}O_{5}(g)\rightarrow4NO_{2}(g)+O_{2}(g)}$ | $k[\mathrm{N_{2}O_{5}}]$ | 1 |
| $\mathrm{2NO(g)+O_{2}(g)\rightarrow2NO_{2}(g)}$ | $k[\mathrm{NO}]^{2}[\mathrm{O_{2}}]$ | 3 |
| $\mathrm{CHCl_{3}(g)+Cl_{2}(g)\rightarrow CCl_{4}(g)+HCl(g)}$ | $k[\mathrm{CHCl_{3}}][\mathrm{Cl_{2}}]^{1/2}$ | $\tfrac32$ |
| $\mathrm{CH_{3}CHO(g)\rightarrow CH_{4}(g)+CO(g)}$ | $k[\mathrm{CH_{3}CHO}]^{3/2}$ | $\tfrac32$ |
| $\mathrm{2NH_{3}(g)\xrightarrow{\text{hot Pt, high }p}N_{2}(g)+3H_{2}(g)}$ | $k$ | 0 |
| $\mathrm{NO_{2}(g)+CO(g)\rightarrow NO(g)+CO_{2}(g)}$ (below 500 K) | $k[\mathrm{NO_{2}}]^{2}$ | 2 |
In the last reaction carbon monoxide is a reactant, yet its concentration does not appear in the rate law at all — the order with respect to CO is zero. In the decomposition of $\mathrm{N_{2}O_{5}}$ the coefficient is 2 but the order is 1. Section "Elementary and complex reactions" below explains why.
Units of the rate constant. The rate always has units of $\mathrm{mol\,L^{-1}\,s^{-1}}$, so the units of $k$ must make up the difference left by $n$ factors of concentration:
| Order $n$ | 0 | 1 | 2 | 3 | $\tfrac32$ |
|---|---|---|---|---|---|
| Units of $k$ | $\mathrm{mol\,L^{-1}\,s^{-1}}$ | $\mathrm{s^{-1}}$ | $\mathrm{L\,mol^{-1}\,s^{-1}}$ | $\mathrm{L^{2}\,mol^{-2}\,s^{-1}}$ | $\mathrm{L^{1/2}\,mol^{-1/2}\,s^{-1}}$ |
For gas reactions written with pressures, replace $\mathrm{mol\,L^{-1}}$ by $\mathrm{bar}$ (or atm): units $\mathrm{bar^{1-n}\,s^{-1}}$. Only for a first-order reaction are the units of $k$ independent of the concentration unit — a fact we use in Section 8.2.
The units therefore reveal the order: given "$k=2.3\times10^{-5}\ \mathrm{L\,mol^{-1}\,s^{-1}}$" you know at once that the reaction is second order overall.
The rate constant of a reaction is $5.0\times10^{-3}\ \mathrm{L\,mol^{-1}\,s^{-1}}$. The overall order of the reaction is
Finding the rate law: the initial-rates method
Because the orders cannot be read from the equation, they must be measured. The most direct way compares the initial rates of several runs that start with different concentrations. Using the initial rate has two advantages: the concentrations are known exactly (they are the ones you made up), and no products are yet present to interfere or to run the reaction backwards.
- Choose two runs in which only one concentration differs, say $[\mathrm{A}]$, while all others are equal.
- Divide the two rate laws: everything except $[\mathrm{A}]$ cancels, $\dfrac{r_{2}}{r_{1}}=\left(\dfrac{[\mathrm{A}]_{2}}{[\mathrm{A}]_{1}}\right)^{x}$. Read off $x$ (if the ratios are not simple, $x=\dfrac{\log(r_{2}/r_{1})}{\log([\mathrm{A}]_{2}/[\mathrm{A}]_{1})}$).
- Repeat with another pair for each other reactant.
- Find $k$ by substituting any one run into $r=k[\mathrm{A}]^{x}[\mathrm{B}]^{y}$, with its units from Result 8.2. Check with a second run.
- Watch which rate is tabulated: rate of reaction, rate of disappearance of a reactant, or rate of formation of a product — they differ by stoichiometric factors and change $k$, not the orders.
A quick dictionary for doubling: if doubling a concentration leaves the rate unchanged the order in it is 0; doubles it, 1; quadruples it, 2; multiplies it by 8, 3; multiplies it by $\sqrt2=1.41$, $\tfrac12$. In general, multiplying a concentration by $f$ multiplies the rate by $f^{x}$.
| Run | $[\mathrm{A}]_{0}$ / $\mathrm{mol\,L^{-1}}$ | $[\mathrm{B}]_{0}$ / $\mathrm{mol\,L^{-1}}$ | initial rate / $\mathrm{mol\,L^{-1}\,s^{-1}}$ |
|---|---|---|---|
| 1 | 0.10 | 0.10 | $2.0\times10^{-4}$ |
| 2 | 0.30 | 0.10 | $6.0\times10^{-4}$ |
| 3 | 0.30 | 0.20 | $2.4\times10^{-3}$ |
| 4 | 0.20 | 0.40 | ? |
Rate law from a clock. In many laboratory experiments (for example the iodide–hydrogen peroxide reaction, in which a little thiosulphate and starch make the solution turn suddenly blue once a fixed small amount of iodine has formed) one measures the time $t$ for a fixed small amount of reaction. Then the initial rate is proportional to $1/t$: if doubling $[\mathrm{I^{-}}]$ halves the clock time, the rate has doubled and the order in iodide is 1.
In the initial-rates lab choose Reaction Z. With $[\mathrm{B}]_{0}=0.10\ \mathrm{mol\,L^{-1}}$, raise $[\mathrm{A}]_{0}$ from $0.10$ to $0.20\ \mathrm{mol\,L^{-1}}$. The initial rate in the reference run is $5.00\times10^{-3}\ \mathrm{mol\,L^{-1}\,s^{-1}}$. What do you expect if Z is second order in A?
For $\mathrm{A+B\rightarrow P}$, tripling $[\mathrm{A}]$ at constant $[\mathrm{B}]$ makes the initial rate 9 times larger, and doubling $[\mathrm{B}]$ at constant $[\mathrm{A}]$ leaves it unchanged. The rate law is
Elementary and complex reactions; molecularity and mechanism
Why do the orders differ from the coefficients? Because most balanced equations are only a summary of what happens. The reaction $\mathrm{2NO(g)+O_{2}(g)\rightarrow2NO_{2}(g)}$ does not need two NO molecules and one $\mathrm{O_{2}}$ molecule to meet at the same instant; the reaction between permanganate and oxalate in acid solution, with 2 + 5 + 16 = 23 ions on the left, certainly cannot happen in one collision. Real reactions proceed through a series of simple steps, each of which is a single molecular event.
An elementary reaction (elementary step) takes place in a single step, exactly as written: the species on the left come together in one encounter and turn directly into the species on the right. A complex reaction is one that takes place through two or more elementary steps. The sequence of elementary steps that adds up to the overall equation is the mechanism of the reaction.
A species formed in one step and consumed in a later step, so that it does not appear in the overall equation, is a reaction intermediate. A catalyst is the opposite: it is consumed in one step and regenerated in a later one.
The molecularity of an elementary reaction is the number of reacting species (molecules, atoms or ions) that must collide simultaneously in that step. A step is unimolecular (one species, e.g. $\mathrm{O_{3}\rightarrow O_{2}+O}$), bimolecular (two, e.g. $\mathrm{NO+O_{3}\rightarrow NO_{2}+O_{2}}$) or termolecular (three, e.g. $\mathrm{2NO+O_{2}\rightarrow2NO_{2}}$ if it is elementary).
Molecularity is a whole number, $1$, $2$ or $3$ — never zero, never fractional. It is defined for an elementary step only; for a complex reaction it has no meaning (one may speak of the molecularity of its slowest step). Molecularity above 3 is practically unknown, because a simultaneous collision of four particles with the right energy and orientation is far too improbable.
For an elementary step — and only for one — the rate law can be written from the equation, because the rate is simply proportional to how often the reacting particles meet, and that is proportional to the product of their concentrations (the law of mass action applied to one step):
For an elementary step $a\mathrm{A}+b\mathrm{B}\rightarrow\text{products}$ (with $a+b\le3$),
$$r=k[\mathrm{A}]^{a}[\mathrm{B}]^{b},$$so its order equals its molecularity: unimolecular steps are first order, bimolecular second order, termolecular third order. The converse is false: a reaction whose rate law happens to match its coefficients may still be complex (Example 4 is an instance).
| Order | Molecularity | |
|---|---|---|
| Defined for | any reaction with a power-law rate (overall or step) | an elementary step only |
| Found by | experiment | the proposed mechanism (theory) |
| Possible values | $0$, whole numbers, fractions, negative | $1$, $2$, $3$ only |
| Can change with conditions? | yes (e.g. pressure, excess of a reagent) | no — fixed for the step |
The rate-determining step. In a sequence of steps, the products can come out no faster than the slowest step lets them through — like cars passing through a toll gate with a single booth on an otherwise wide motorway. The slowest step is the rate-determining step (rate-limiting step), and the rate law of the overall reaction is the rate law of that step, expressed in terms of species that appear in the overall equation.
- Slow first step. The overall rate equals the rate of the first step; its rate law is written from its own equation (Law 8.3). Fast later steps do not affect the rate, so species that enter only after the slow step do not appear in the rate law (zero order in them).
- Fast reversible step, then slow step (pre-equilibrium). If the slow step involves an intermediate I formed in an earlier fast, reversible step $\mathrm{A+B\rightleftharpoons I}$, that step stays essentially at equilibrium: $[\mathrm{I}]=K[\mathrm{A}][\mathrm{B}]$, with $K=k_{1}/k_{-1}$. Substituting into the rate law of the slow step removes the intermediate. The observed rate constant is a product such as $k=Kk_{2}$.
- The steps must add up to the overall equation, and the final rate law must contain only species that appear in the overall reaction (reactants, products, catalyst) — never an intermediate.
A mechanism that reproduces the experimental rate law is consistent with it, not proved: several mechanisms can give the same rate law, but one that gives the wrong rate law is certainly wrong.
1. Taking orders from the balanced equation. The orders are experimental. For $\mathrm{2N_{2}O_{5}\rightarrow4NO_{2}+O_{2}}$ the order is 1, not 2; for $\mathrm{NO_{2}+CO}$ the order in CO is 0. Only for an elementary step do exponents equal coefficients.
2. Forgetting the coefficient (or the sign) in the rate. "Rate of reaction" means $-\tfrac{1}{a}\,d[\mathrm{A}]/dt$. Rates of disappearance and formation differ from it by the stoichiometric factors; check which one a question gives and which it asks for.
3. Units of $k$. $(\mathrm{mol\,L^{-1}})^{1-n}\,\mathrm{s^{-1}}$: zero order $\mathrm{mol\,L^{-1}\,s^{-1}}$, first $\mathrm{s^{-1}}$, second $\mathrm{L\,mol^{-1}\,s^{-1}}$. Work backwards from units to order in "identify the order" questions.
4. Confusing order with molecularity. Molecularity belongs to an elementary step and is 1, 2 or 3; order can be zero or fractional and belongs to the experimental rate law. A bimolecular slow step can still give a third-order reaction (Example 5).
5. Leaving an intermediate in the rate law. If the slow step contains an intermediate, replace its concentration using the fast pre-equilibrium before you state the order. Also remember: $k$ changes with temperature and catalyst, never with concentration.
Which statement about order and molecularity is correct?
Exercises
Concentrations are in $\mathrm{mol\,L^{-1}}$; all reactions take place at constant volume and temperature unless stated.
- 1 For $\mathrm{N_{2}(g)+3H_{2}(g)\rightarrow2NH_{3}(g)}$, $-d[\mathrm{H_{2}}]/dt=0.045\ \mathrm{mol\,L^{-1}\,s^{-1}}$. Find $d[\mathrm{NH_{3}}]/dt$, $-d[\mathrm{N_{2}}]/dt$ and the rate of reaction.
- 2 For $\mathrm{4NH_{3}(g)+5O_{2}(g)\rightarrow4NO(g)+6H_{2}O(g)}$, water vapour forms at $3.6\times10^{-3}\ \mathrm{mol\,L^{-1}\,s^{-1}}$. Find the rates of consumption of $\mathrm{O_{2}}$ and $\mathrm{NH_{3}}$ and the rate of reaction.
- 3 In acid solution, $\mathrm{5Br^{-}(aq)+BrO_{3}^{-}(aq)+6H^{+}(aq)\rightarrow3Br_{2}(aq)+3H_{2}O(l)}$. Bromine appears at $0.024\ \mathrm{mol\,L^{-1}\,min^{-1}}$. How fast is bromide used up?
- 4 For $\mathrm{2A\rightarrow B}$, $[\mathrm{A}]$ falls from $0.50$ to $0.38\ \mathrm{mol\,L^{-1}}$ in $10$ minutes. Find the average rate of reaction in $\mathrm{mol\,L^{-1}\,s^{-1}}$.
- 5 In a $2.0\ \mathrm{L}$ flask, $\mathrm{2N_{2}O_{5}(g)\rightarrow4NO_{2}(g)+O_{2}(g)}$ produces $0.12\ \mathrm{mol}$ of $\mathrm{NO_{2}}$ in the first $30\ \mathrm{s}$. Find the average rates of formation of $\mathrm{NO_{2}}$ and of disappearance of $\mathrm{N_{2}O_{5}}$.
- 6 For $\mathrm{2HI(g)\rightarrow H_{2}(g)+I_{2}(g)}$ in a closed vessel, the partial pressure of HI falls from $0.600$ to $0.520\ \mathrm{bar}$ in $40\ \mathrm{s}$. Find the average rate of reaction in $\mathrm{bar\,s^{-1}}$ and the partial pressure of $\mathrm{H_{2}}$ at $40\ \mathrm{s}$ (none at the start).
- 7 For $\mathrm{A\rightarrow2P}$, the tangent to the $[\mathrm{P}]$–$t$ curve at $t=30\ \mathrm{s}$ passes through $(0\ \mathrm{s},\ 0.10)$ and $(60\ \mathrm{s},\ 0.40\ \mathrm{mol\,L^{-1}})$. Find $d[\mathrm{P}]/dt$, $-d[\mathrm{A}]/dt$ and the rate of reaction at $30\ \mathrm{s}$.
- 8 For a reactant whose concentration–time curve is concave upwards, explain why the average rate over $0\to t$ is larger than the instantaneous rate at $t$, but smaller than the initial rate.
- 1 For $r=k[\mathrm{A}]^{1/2}[\mathrm{B}]^{2}$ give the overall order and the units of $k$.
- 2 State the overall order of reactions with rate constants (i) $3.4\times10^{-5}\ \mathrm{s^{-1}}$, (ii) $6.2\times10^{-4}\ \mathrm{mol\,L^{-1}\,min^{-1}}$, (iii) $1.8\ \mathrm{L^{2}\,mol^{-2}\,s^{-1}}$.
- 3 For $r=k[\mathrm{A}]^{2}[\mathrm{B}]$, $[\mathrm{A}]$ is doubled and $[\mathrm{B}]$ is halved. By what factor does the rate change?
- 4 For $r=k[\mathrm{X}]^{2}$, by what factor must $[\mathrm{X}]$ be increased to make the rate 9 times larger?
- 5 For $r=k[\mathrm{A}]^{n}$, increasing $[\mathrm{A}]$ four-fold increases the rate eight-fold. Find $n$.
- 6 For $\mathrm{2NO(g)+O_{2}(g)\rightarrow2NO_{2}(g)}$, $r=k[\mathrm{NO}]^{2}[\mathrm{O_{2}}]$. The volume of the vessel is suddenly halved at constant temperature. By what factor does the rate change?
- 7 For $\mathrm{A+2B\rightarrow products}$, $r=k[\mathrm{A}][\mathrm{B}]$ with $k=2.5\times10^{-2}\ \mathrm{L\,mol^{-1}\,s^{-1}}$. Find the rate of reaction and the rate of consumption of B when $[\mathrm{A}]=0.20$ and $[\mathrm{B}]=0.40\ \mathrm{mol\,L^{-1}}$.
- 8 The decomposition of ammonia on a hot platinum surface at high pressure is zero order with rate $2.0\times10^{-3}\ \mathrm{mol\,L^{-1}\,s^{-1}}$ when $[\mathrm{NH_{3}}]=0.10\ \mathrm{mol\,L^{-1}}$. Find the rate when $[\mathrm{NH_{3}}]=0.05\ \mathrm{mol\,L^{-1}}$ and explain.
| Run | $[\mathrm{A}]_{0}$ | $[\mathrm{B}]_{0}$ | $r_{0}$ / $\mathrm{mol\,L^{-1}\,s^{-1}}$ | $[\mathrm{X}]_{0}$ | $[\mathrm{Y}]_{0}$ | $r_{0}$ / $\mathrm{mol\,L^{-1}\,s^{-1}}$ | |
|---|---|---|---|---|---|---|---|
| 1 | 0.010 | 0.010 | $3.0\times10^{-5}$ | 0.10 | 0.10 | $4.0\times10^{-3}$ | |
| 2 | 0.020 | 0.010 | $1.2\times10^{-4}$ | 0.20 | 0.10 | $4.0\times10^{-3}$ | |
| 3 | 0.010 | 0.030 | $9.0\times10^{-5}$ | 0.10 | 0.40 | $8.0\times10^{-3}$ |
- 1 Find the order of the first reaction with respect to A.
- 2 Find its order with respect to B, and write the rate law.
- 3 Find $k$ for the first reaction, with units.
- 4 Predict its initial rate when $[\mathrm{A}]_{0}=0.030$ and $[\mathrm{B}]_{0}=0.020\ \mathrm{mol\,L^{-1}}$.
- 5 Find the orders of the second reaction with respect to X and Y.
- 6 Find $k$ for the second reaction, with units.
- 7 Predict the initial rate of the second reaction when $[\mathrm{X}]_{0}=0.50$ and $[\mathrm{Y}]_{0}=0.90\ \mathrm{mol\,L^{-1}}$.
- 8 In an iodine-clock experiment the blue colour appears after $64\ \mathrm{s}$. The reaction is first order in $\mathrm{H_{2}O_{2}}$ and first order in $\mathrm{I^{-}}$. How long does the clock take if both concentrations are doubled (all else the same)?
- 1 Give the molecularity and rate law of each elementary step: (i) $\mathrm{O_{3}(g)\rightarrow O_{2}(g)+O(g)}$; (ii) $\mathrm{NO(g)+O_{3}(g)\rightarrow NO_{2}(g)+O_{2}(g)}$; (iii) $\mathrm{2NO(g)+O_{2}(g)\rightarrow2NO_{2}(g)}$ (assume elementary).
- 2 Explain why elementary steps of molecularity 4 or more are not observed, and why the reaction of $\mathrm{MnO_{4}^{-}}$ with oxalate in acid (23 ions on the left) must be complex.
- 3 Below 500 K, $\mathrm{NO_{2}(g)+CO(g)\rightarrow NO(g)+CO_{2}(g)}$ has $r=k[\mathrm{NO_{2}}]^{2}$. Show that the mechanism $\mathrm{NO_{2}+NO_{2}\rightarrow NO_{3}+NO}$ (slow), $\mathrm{NO_{3}+CO\rightarrow NO_{2}+CO_{2}}$ (fast) is consistent with it, and name the intermediate.
- 4 Ozone decomposes, $\mathrm{2O_{3}(g)\rightarrow3O_{2}(g)}$, by $\mathrm{O_{3}\rightleftharpoons O_{2}+O}$ (fast) followed by $\mathrm{O+O_{3}\rightarrow2O_{2}}$ (slow). Derive the rate law and state the order with respect to $\mathrm{O_{3}}$, to $\mathrm{O_{2}}$, and overall.
- 5 In part 4, by what factor does the rate change if $[\mathrm{O_{3}}]$ and $[\mathrm{O_{2}}]$ are both doubled?
- 6 For $\mathrm{2NO(g)+2H_{2}(g)\rightarrow N_{2}(g)+2H_{2}O(g)}$, $r=k[\mathrm{NO}]^{2}[\mathrm{H_{2}}]$. A suggested mechanism: $\mathrm{2NO\rightleftharpoons N_{2}O_{2}}$ (fast); $\mathrm{N_{2}O_{2}+H_{2}\rightarrow N_{2}O+H_{2}O}$ (slow); $\mathrm{N_{2}O+H_{2}\rightarrow N_{2}+H_{2}O}$ (fast). Show it is consistent, and find the factor by which the rate changes when $[\mathrm{NO}]$ is tripled at constant $[\mathrm{H_{2}}]$.
- 7 The hydrolysis $\mathrm{(CH_{3})_{3}CBr+OH^{-}\rightarrow(CH_{3})_{3}COH+Br^{-}}$ has $r=k[\mathrm{(CH_{3})_{3}CBr}]$. Suggest a two-step mechanism and state the factor by which the rate changes when $[\mathrm{OH^{-}}]$ is doubled.
- 8 For $\mathrm{A+2B\rightarrow C}$, $r=k[\mathrm{A}][\mathrm{B}]$. Can the reaction be elementary? Propose a two-step mechanism consistent with the rate law.
E1. JEE Main · MCQ For the reaction $\mathrm{2A+3B\rightarrow4C}$, C is formed at $3.6\times10^{-2}\ \mathrm{mol\,L^{-1}\,s^{-1}}$ at a certain instant. The rate of consumption of B at that instant is (A) $4.8\times10^{-2}$ (B) $1.8\times10^{-2}$ (C) $2.7\times10^{-2}$ (D) $9.0\times10^{-3}$ $\mathrm{mol\,L^{-1}\,s^{-1}}$
E2. JEE Main · Numerical For $\mathrm{A+B\rightarrow P}$ the initial rates were: $[\mathrm{A}]_{0}=0.10$, $[\mathrm{B}]_{0}=0.10$: $6.0\times10^{-3}$; $[\mathrm{A}]_{0}=0.20$, $[\mathrm{B}]_{0}=0.10$: $2.4\times10^{-2}$; $[\mathrm{A}]_{0}=0.10$, $[\mathrm{B}]_{0}=0.30$: $1.8\times10^{-2}$ (concentrations in $\mathrm{mol\,L^{-1}}$, rates in $\mathrm{mol\,L^{-1}\,s^{-1}}$). The initial rate when $[\mathrm{A}]_{0}=0.30$ and $[\mathrm{B}]_{0}=0.20\ \mathrm{mol\,L^{-1}}$ is $x\times10^{-3}\ \mathrm{mol\,L^{-1}\,s^{-1}}$. Find $x$. Give the answer to the nearest integer.
E3. JEE Main · MCQ The rate law of a reaction is $r=k[\mathrm{A}][\mathrm{B}]^{1/2}$. The units of $k$ are (A) $\mathrm{L^{1/2}\,mol^{-1/2}\,s^{-1}}$ (B) $\mathrm{mol^{1/2}\,L^{-1/2}\,s^{-1}}$ (C) $\mathrm{L\,mol^{-1}\,s^{-1}}$ (D) $\mathrm{s^{-1}}$
E4. JEE Main · Numerical The reaction $\mathrm{2NO(g)+Cl_{2}(g)\rightarrow2NOCl(g)}$ is believed to proceed by $\mathrm{NO+Cl_{2}\rightleftharpoons NOCl_{2}}$ (fast equilibrium) followed by $\mathrm{NOCl_{2}+NO\rightarrow2NOCl}$ (slow). The volume of the reaction vessel is reduced to one third of its value at constant temperature. By what factor does the rate of reaction increase? Give the answer to the nearest integer.
E5. JEE Main · MCQ Which of the following statements is incorrect? (A) The order of a reaction can be zero or fractional. (B) A catalyst does not change the equilibrium constant of a reaction. (C) For an elementary step the order equals the molecularity. (D) The rate constant of a reaction increases when the concentration of a reactant is increased.
E6. JEE Main · Numerical In a closed vessel at constant temperature, $\mathrm{2N_{2}O_{5}(g)\rightarrow4NO_{2}(g)+O_{2}(g)}$. At a certain instant the partial pressure of $\mathrm{N_{2}O_{5}}$ is falling at $0.036\ \mathrm{bar\,min^{-1}}$. The total pressure is rising at $x\times10^{-3}\ \mathrm{bar\,min^{-1}}$. Find $x$. Give the answer to the nearest integer.
Research question. What is the rate law of the reaction between hydrogen peroxide and iodide ions in acid solution at room temperature, $\mathrm{H_{2}O_{2}(aq)+2I^{-}(aq)+2H^{+}(aq)\rightarrow I_{2}(aq)+2H_{2}O(l)}$ — and does the order with respect to iodide really differ from its coefficient?
Why it matters. Clock reactions are how kinetic data were first gathered without instruments, and the same idea — timing how long it takes to reach a fixed small extent of reaction — is still used in quality control, in teaching laboratories worldwide and in "time–temperature indicators" that change colour on food packages when a product has been stored too warm for too long. The peroxide–iodide reaction is also a model for how hydrogen peroxide (a disinfectant and bleach) is destroyed in the environment and in the body.
What to do.
- With your teacher, prepare dilute potassium iodide, dilute sulphuric acid, a little sodium thiosulphate and starch, and dilute hydrogen peroxide. The thiosulphate turns the first iodine formed back into iodide; when it is used up, the next iodine makes the starch turn blue-black suddenly.
- Keep the amount of thiosulphate the same in every run, so the "clock" always measures the time $t$ to make the same small amount of iodine. Then the initial rate $\propto1/t$.
- Run a series in which only the iodide concentration changes (make up the volume with water so the total volume is constant), and a second series in which only the peroxide concentration changes. Record the room temperature: it must not drift.
- Plot $\log(1/t)$ against $\log[\mathrm{I^{-}}]_{0}$ and against $\log[\mathrm{H_{2}O_{2}}]_{0}$. The slopes are the orders.
- Compare the order in iodide with its coefficient (2) and write the rate law. Suggest which step might be rate-determining.
Tools: Burettes or graduated pipettes, beakers, a stopwatch or phone timer, a white tile, a thermometer, spreadsheet software for the log–log plots.
Hand in: A table of concentrations and clock times, the two log–log graphs with their slopes, the rate law with an estimate of the uncertainty in each order, and a short paragraph comparing order and coefficient.
Going further. Repeat one run with a few drops of an iron(III) or molybdate solution added. What does a catalyst do to the clock time, and does the order in iodide change?
🧪 Self-check quiz
Q1. The instantaneous rate of disappearance of a reactant at time $t$ equals
Q2. For $\mathrm{2NO(g)+Br_{2}(g)\rightarrow2NOBr(g)}$, NOBr is formed at $4.0\times10^{-4}\ \mathrm{mol\,L^{-1}\,s^{-1}}$. The rate of consumption of $\mathrm{Br_{2}}$ is
Q3. The rate constant of a reaction has units $\mathrm{mol\,L^{-1}\,s^{-1}}$. If the initial concentration of the reactant is doubled, the initial rate
Q4. A reaction proceeds by $\mathrm{A_{2}\rightleftharpoons2A}$ (fast) and $\mathrm{A+B\rightarrow AB}$ (slow); overall $\mathrm{A_{2}+2B\rightarrow2AB}$. The order with respect to $\mathrm{A_{2}}$ is
Q5. Which change increases the rate constant of a given reaction?