10.2 Groups 16, 17 and 18: Trends and the First Element
The last three columns of the p-block hold the most electronegative elements and the least reactive ones. Their trends are steady down each group — until you reach the first member: oxygen and fluorine break almost every rule, chlorine beats fluorine for electron gain, and xenon, a 'noble' gas, turns out to make compounds.
Oxygen is a colourless gas made of $\mathrm{O_{2}}$ molecules; sulphur, directly below it, is a yellow solid made of crown-shaped $\mathrm{S_{8}}$ rings. Water boils at $373\ \mathrm{K}$, while hydrogen sulphide — a heavier molecule — boils at $213\ \mathrm{K}$. Fluorine attacks almost everything, even glass and water, although its atoms release less energy on gaining an electron than chlorine atoms do. Helium cannot be frozen at all at ordinary pressure, yet xenon, five rows further down the same group, burns in fluorine to give stable white crystals. Every one of these facts comes from the same few ideas: size, electronegativity, the availability of $d$ orbitals, and the special position of the first element of each group.
In Section 10.1 we met the general p-block ideas — configurations, the group oxidation state, the inert-pair effect (Rule 10.1) and the reasons for the unique behaviour of the first element (Principle 10.2) — and applied them to groups 13, 14 and 15. Here we complete the p-block with groups 16, 17 and 18, following the JEE Main list exactly: electronic configuration, trends in physical and chemical properties down the groups and across the periods, and the unique behaviour of oxygen, fluorine and helium. Hydrides, oxides, halides and oxoacids appear only to illustrate trends — acid strength, thermal stability, bond angles, boiling points, oxidising power — and we finish by looking across the whole p-block at multiple bonding and covalency.
Group 16: oxygen to polonium
The group 16 elements O, S, Se, Te, Po (and synthetic Lv) are the chalcogens ("ore-formers": many metal ores are oxides and sulphides); valence configuration $ns^{2}np^{4}$.
The group 17 elements F, Cl, Br, I, At (and synthetic Ts) are the halogens ("salt-formers"); valence configuration $ns^{2}np^{5}$.
The group 18 elements He, Ne, Ar, Kr, Xe, Rn (and synthetic Og) are the noble gases; valence configuration $ns^{2}np^{6}$, except helium, $1s^{2}$. Polonium, astatine and radon are radioactive.
| Property | O | S | Se | Te | Po |
|---|---|---|---|---|---|
| Configuration | $[\mathrm{He}]2s^{2}2p^{4}$ | $[\mathrm{Ne}]3s^{2}3p^{4}$ | $[\mathrm{Ar}]3d^{10}4s^{2}4p^{4}$ | $[\mathrm{Kr}]4d^{10}5s^{2}5p^{4}$ | $[\mathrm{Xe}]4f^{14}5d^{10}6s^{2}6p^{4}$ |
| Covalent radius / pm | 66 | 104 | 117 | 137 | 146 |
| $\Delta_{i}H_{1}$ / $\mathrm{kJ\,mol^{-1}}$ | 1314 | 1000 | 941 | 869 | 813 |
| $\Delta_{eg}H$ / $\mathrm{kJ\,mol^{-1}}$ | −141 | −200 | −195 | −190 | −174 |
| Electronegativity | 3.5 | 2.44 | 2.48 | 2.01 | 1.76 |
| Boiling point / K | 90 | 718 | 958 | 1260 | 1235 |
Radius, ionisation enthalpy, electronegativity. Down the group the radius increases and $\Delta_{i}H_{1}$ decreases steadily. Note that in periods 2 and 3 the group 16 element has a lower first ionisation enthalpy than the group 15 element before it (O 1314 < N 1402; S 1000 < P 1012): removing one electron from $np^{4}$ relieves the repulsion of the one paired-up p electron and leaves the stable half-filled $np^{3}$. Electronegativity falls from O (3.5, second only to F) to Po, with a small rise from S (2.44) to Se (2.48) caused by the $3d^{10}$ subshell.
Electron gain enthalpy is large and negative, but the most negative value belongs to sulphur, not oxygen. The oxygen atom is so small that an incoming electron meets strong repulsion from the six electrons already crowded in its compact $2p$ subshell, so less energy is released. Beyond sulphur, $\Delta_{eg}H$ becomes less negative down the group as the atoms grow.
Metallic character increases down the group: oxygen and sulphur are non-metals, selenium and tellurium are metalloids, polonium is a metal. Melting and boiling points rise from O to Te with growing atomic size; oxygen is far below the rest because it is made of small $\mathrm{O_{2}}$ molecules, while S, Se and Te are solids of rings or chains.
Oxidation states. The elements need two electrons to complete an octet, so $-2$ is common; but only oxygen keeps to negative states almost entirely ($-2$; $-1$ in peroxides, $-\tfrac12$ in superoxides). Oxygen shows a positive state only when bonded to the one element more electronegative than itself: $+2$ in $\mathrm{OF_{2}}$ and $+1$ in $\mathrm{O_{2}F_{2}}$. S, Se and Te show $+2$, $+4$ and $+6$; down the group the $+4$ state becomes more stable than $+6$ (the inert-pair effect), and polonium is mostly $+2$ and $+4$. Oxygen's covalency is normally 2 (at most 4, as in some oxides and ions); sulphur, with $3d$ orbitals available, reaches covalency 6 in $\mathrm{SF_{6}}$.
From $\mathrm{H_{2}O}$ to $\mathrm{H_{2}Te}$, as E becomes larger and less electronegative:
- H–E bond enthalpy and thermal stability decrease: $463,\ 347,\ 276,\ 238\ \mathrm{kJ\,mol^{-1}}$; $\mathrm{H_{2}O\gt H_{2}S\gt H_{2}Se\gt H_{2}Te}$ in stability. So reducing character increases ($\mathrm{H_{2}Te}$ strongest; water is not a reducing agent in this sense).
- Acid strength increases: $\mathrm{H_{2}O\lt H_{2}S\lt H_{2}Se\lt H_{2}Te}$ ($\mathrm{p}K_{a1}\approx15.7,\ 6.9,\ 3.9,\ 2.6$). The weaker H–E bond releases $\mathrm{H^{+}}$ more easily, and the larger $\mathrm{HE^{-}}$ ion spreads its charge better. Bond strength wins over electronegativity down a group.
- Bond angle decreases: $104.5^\circ$, $92^\circ$, $91^\circ$, $90^\circ$. As in group 15, the bond pairs of the small, electronegative O are close to the central atom and repel strongly; in the heavier hydrides the angle approaches the $90^\circ$ between pure $p$ orbitals.
- Boiling point: $\mathrm{H_{2}S\ (213\ K)\lt H_{2}Se\ (232\ K)\lt H_{2}Te\ (269\ K)\lt H_{2}O\ (373\ K)}$. Water is far out of line because of extensive hydrogen bonding (two O–H bonds and two lone pairs per molecule).
Oxides and halides as illustrations. The oxides $\mathrm{EO_{2}}$ and $\mathrm{EO_{3}}$ of S, Se and Te are acidic, and as always the oxide in the higher oxidation state is the more acidic ($\mathrm{SO_{3}\gt SO_{2}}$). Among the halides, all of S, Se and Te form hexafluorides $\mathrm{EF_{6}}$ (octahedral, covalency 6); $\mathrm{SF_{6}}$ is remarkably unreactive because its six fluorines shield the sulphur from attack. Oxygen forms no hexafluoride — it has no $d$ orbitals — and its only fluorides are $\mathrm{OF_{2}}$ and $\mathrm{O_{2}F_{2}}$.
Catenation and multiple bonding. Oxygen forms a strong $p\pi$–$p\pi$ double bond, so the element is the diatomic molecule $\mathrm{O{=}O}$ (and ozone, $\mathrm{O_{3}}$); the O–O single bond is weak (lone-pair repulsion in a short bond, as for N–N), so oxygen chains longer than two atoms are unknown. Sulphur forms poor $\pi$ bonds with itself but a stronger S–S single bond, so it catenates: $\mathrm{S_{8}}$ rings, long chains in plastic sulphur, polysulphide ions $\mathrm{S_{n}^{2-}}$. With oxygen, sulphur does form multiple bonds, but of the $d\pi$–$p\pi$ type (as in $\mathrm{SO_{3}}$ and $\mathrm{SO_{4}^{2-}}$).
Oxygen differs from S, Se, Te and Po because of its small size, high electronegativity and lack of $d$ orbitals (Principle 10.2): it is a diatomic gas with a $p\pi$–$p\pi$ double bond; its hydride is hydrogen-bonded, so water is a liquid with the highest boiling point in the series; its covalency is limited (no $\mathrm{OF_{6}}$, while $\mathrm{SF_{6}}$ exists); it shows mainly the $-2$ state and a positive state only with fluorine; its electron gain enthalpy is less negative than sulphur's; and it catenates very little.
In the trend explorer below choose group 16 and electron gain enthalpy. Which element has the most negative value?
Which order of acid strength is correct?
Group 17: fluorine to astatine
| Property | F | Cl | Br | I |
|---|---|---|---|---|
| Configuration | $[\mathrm{He}]2s^{2}2p^{5}$ | $[\mathrm{Ne}]3s^{2}3p^{5}$ | $[\mathrm{Ar}]3d^{10}4s^{2}4p^{5}$ | $[\mathrm{Kr}]4d^{10}5s^{2}5p^{5}$ |
| Covalent radius / pm | 64 | 99 | 114 | 133 |
| Ionic radius $\mathrm{X^{-}}$ / pm | 133 | 184 | 196 | 220 |
| $\Delta_{i}H_{1}$ / $\mathrm{kJ\,mol^{-1}}$ | 1681 | 1256 | 1142 | 1008 |
| $\Delta_{eg}H$ / $\mathrm{kJ\,mol^{-1}}$ | −333 | −349 | −325 | −296 |
| Electronegativity | 4.0 | 3.2 | 3.0 | 2.7 |
| X–X bond enthalpy / $\mathrm{kJ\,mol^{-1}}$ | 158.8 | 242.6 | 192.8 | 151.1 |
| Hydration enthalpy of $\mathrm{X^{-}}$ / $\mathrm{kJ\,mol^{-1}}$ | −515 | −381 | −347 | −305 |
| $E^\circ(\mathrm{X_{2}/X^{-}})$ / V | 2.87 | 1.36 | 1.09 | 0.54 |
| Melting / boiling point / K | 54.4 / 84.9 | 172.0 / 239.0 | 265.8 / 332.5 | 386.6 / 458.2 |
Physical trends. Each halogen has the smallest radius and the highest ionisation enthalpy and electronegativity in its period (apart from the noble gas). Down the group the radius increases, $\Delta_{i}H_{1}$ and electronegativity decrease, and the elements change from gases ($\mathrm{F_{2}}$, $\mathrm{Cl_{2}}$) to a liquid ($\mathrm{Br_{2}}$) to a solid ($\mathrm{I_{2}}$) as dispersion forces between the larger $\mathrm{X_{2}}$ molecules grow. The colour deepens — pale yellow $\mathrm{F_{2}}$, greenish-yellow $\mathrm{Cl_{2}}$, red-brown $\mathrm{Br_{2}}$, violet iodine vapour — because the energy gap for exciting an outer electron shrinks down the group, so the absorbed light moves from violet towards yellow-green. Iodine shows the first hints of metallic character (a lustrous solid); astatine is radioactive and scarce.
Two anomalies of fluorine. (i) Electron gain enthalpy: $\mathrm{Cl\ (-349)}$ is more negative than $\mathrm{F\ (-333)}$, for the same reason as $\mathrm{S}$ versus $\mathrm{O}$ — the small $2p$ subshell of F is crowded, and the incoming electron is repelled. The order is $\mathrm{Cl\gt F\gt Br\gt I}$ (by magnitude). (ii) Bond dissociation enthalpy: the F–F bond ($158.8\ \mathrm{kJ\,mol^{-1}}$) is much weaker than Cl–Cl ($242.6$), and the order is $\mathrm{Cl_{2}\gt Br_{2}\gt F_{2}\gt I_{2}}$. In the very short F–F bond the lone pairs on the two atoms repel each other strongly, exactly as for N–N and O–O.
Oxidation states. With seven valence electrons, every halogen completes its octet by gaining one electron: $-1$. Fluorine, the most electronegative element, shows only $-1$ in its compounds (and has no $d$ orbitals to expand its octet). Chlorine, bromine and iodine also show $+1$, $+3$, $+5$ and $+7$ when bonded to more electronegative oxygen or fluorine (Cl and Br also $+4$, $+6$ in some oxides). The odd positive states arise because each step unpairs one more pair of $np$ or $ns$ electrons into vacant $nd$ orbitals. The interhalogen compounds illustrate this trend: the larger halogen is central and positive, and the number of fluorines it can hold grows with its size — $\mathrm{ClF}$, $\mathrm{ClF_{3}}$, $\mathrm{BrF_{5}}$, $\mathrm{IF_{7}}$ ($+1$, $+3$, $+5$, $+7$).
The halogens are strong oxidising agents, and their oxidising power in aqueous solution decreases down the group:
$$\mathrm{F_{2}\gt Cl_{2}\gt Br_{2}\gt I_{2}}\qquad E^\circ(\mathrm{X_{2}/X^{-}}) = 2.87,\ 1.36,\ 1.09,\ 0.54\ \mathrm{V}.$$A halogen therefore oxidises the halide ions below it: $\mathrm{Cl_{2}(g)+2Br^{-}(aq)\rightarrow 2Cl^{-}(aq)+Br_{2}(aq)}$, but $\mathrm{Br_{2}}$ cannot oxidise $\mathrm{Cl^{-}}$. Oxidising power is decided by the whole process $\tfrac12\mathrm{X_{2}}\rightarrow\mathrm{X}\rightarrow\mathrm{X^{-}(g)}\rightarrow\mathrm{X^{-}(aq)}$: bond dissociation, electron gain and hydration. Fluorine wins because its weak F–F bond costs little and the tiny $\mathrm{F^{-}}$ ion is very strongly hydrated — which more than makes up for its less negative electron gain enthalpy.
- H–X bond enthalpy and thermal stability: $\mathrm{HF\ (574)\gt HCl\ (432)\gt HBr\ (363)\gt HI\ (295\ kJ\,mol^{-1})}$; so reducing power increases, $\mathrm{HI}$ strongest.
- Acid strength in water: $\mathrm{HF\lt HCl\lt HBr\lt HI}$. HF is a weak acid ($\mathrm{p}K_{a}\approx3.2$); the others are strong. Bond strength again wins over electronegativity.
- Boiling point: $\mathrm{HCl\ (189)\lt HBr\ (206)\lt HI\ (238)\lt HF\ (293\ K)}$; HF is hydrogen-bonded (zig-zag chains), the rest follow molar mass.
- Dipole moment: $\mathrm{HF\gt HCl\gt HBr\gt HI}$, following the electronegativity difference.
- Oxoacids: for one halogen, acid strength rises with the number of oxygen atoms (the higher oxidation state spreads the negative charge of the anion over more O atoms): $\mathrm{HOCl\lt HClO_{2}\lt HClO_{3}\lt HClO_{4}}$. For one formula type it falls down the group as the halogen becomes less electronegative: $\mathrm{HOCl\gt HOBr\gt HOI}$.
In the hydride lab choose group 17. Which hydrogen halide has the highest boiling point, and which is the strongest acid?
Fluorine differs from Cl, Br and I because of its very small size, the highest electronegativity of all elements and the lack of $d$ orbitals: it shows only the $-1$ state; its electron gain enthalpy is less negative than chlorine's; its X–X bond is weak ($\mathrm{F_{2}}$ dissociates easily); it is nevertheless the strongest oxidising agent; it cannot expand its octet (no $\mathrm{FCl_{3}}$-type compounds with F central); and HF is hydrogen-bonded — a weak acid with an unusually high boiling point. Its compounds with metals are more ionic than the other halides, because F is so electronegative.
The correct order of X–X bond dissociation enthalpy is
Group 18: the noble gases, and why xenon forms compounds
| Property | He | Ne | Ar | Kr | Xe | Rn |
|---|---|---|---|---|---|---|
| Configuration | $1s^{2}$ | $[\mathrm{He}]2s^{2}2p^{6}$ | $[\mathrm{Ne}]3s^{2}3p^{6}$ | $[\mathrm{Ar}]3d^{10}4s^{2}4p^{6}$ | $[\mathrm{Kr}]4d^{10}5s^{2}5p^{6}$ | $[\mathrm{Xe}]4f^{14}5d^{10}6s^{2}6p^{6}$ |
| Atomic (van der Waals) radius / pm | 120 | 160 | 190 | 200 | 220 | — |
| $\Delta_{i}H_{1}$ / $\mathrm{kJ\,mol^{-1}}$ | 2372 | 2080 | 1520 | 1351 | 1170 | 1037 |
| $\Delta_{eg}H$ / $\mathrm{kJ\,mol^{-1}}$ (approx.) | +48 | +116 | +96 | +96 | +77 | +68 |
| Boiling point / K | 4.2 | 27.1 | 87.2 | 119.7 | 165.0 | 211 |
Configuration and stability. Every noble gas has a completely filled valence shell: $ns^{2}np^{6}$, or $1s^{2}$ for helium. Helium has the $s^{2}$ configuration of the s-block but is placed in group 18 because its shell ($n=1$) is complete, and its properties are those of a noble gas. A closed shell means: the highest ionisation enthalpy in each period (helium's, $2372\ \mathrm{kJ\,mol^{-1}}$, is the highest of any element), a positive electron gain enthalpy (an added electron would have to enter the next shell), and no unpaired electrons to share. The atoms therefore exist singly — the noble gases are monatomic — and for a long time they were thought to form no compounds at all.
Physical trends. Down the group the atomic radius increases and $\Delta_{i}H_{1}$ decreases. The only forces between the atoms are weak dispersion forces, which grow as the atoms get larger and their electron clouds more easily distorted (more polarisable). So melting and boiling points are very low and rise steadily down the group, from $4.2\ \mathrm{K}$ for helium — the lowest boiling point of any substance; helium does not even solidify at 1 bar — to $211\ \mathrm{K}$ for radon. Note that the radii in the table are van der Waals radii (the atoms are not bonded), so they cannot be compared directly with the covalent radii of the halogens.
In 1962 Neil Bartlett noticed that $\mathrm{PtF_{6}}$ oxidises molecular oxygen to $\mathrm{O_{2}^{+}[PtF_{6}]^{-}}$, and that the first ionisation enthalpy of $\mathrm{O_{2}}$ ($1175\ \mathrm{kJ\,mol^{-1}}$) is almost the same as that of xenon ($1170\ \mathrm{kJ\,mol^{-1}}$). Mixing Xe with $\mathrm{PtF_{6}}$ gave the first noble-gas compound. The trend behind it:
- Ionisation enthalpy falls down group 18. Xe (1170) and Rn (1037) lose or share electrons far more easily than He (2372), Ne (2080) or Ar (1520). Krypton (1351) is borderline and forms only $\mathrm{KrF_{2}}$.
- Only the most electronegative partners succeed: fluorine and oxygen. Known xenon compounds include $\mathrm{XeF_{2}}$, $\mathrm{XeF_{4}}$, $\mathrm{XeF_{6}}$, $\mathrm{XeO_{3}}$, $\mathrm{XeO_{4}}$, $\mathrm{XeOF_{4}}$ and $\mathrm{XeO_{2}F_{2}}$, with xenon in the states $+2$, $+4$, $+6$ and $+8$ (even numbers, because electrons are unpaired two at a time into vacant $5d$ orbitals).
- He, Ne and Ar form no stable compounds under normal conditions: their electrons are held too tightly, and (for He and Ne) there are no low-lying vacant orbitals in the valence shell. Radon is chemically similar to xenon, but its radioactivity makes its chemistry hard to study.
The shapes follow VSEPR theory (Section 3.2): lone pairs on Xe $=\tfrac12(8-\text{number of bonds to F, counting each Xe=O as 2})$.
The main reason that xenon, but not neon, forms compounds with fluorine is that
Across the p-block: periods, the first element and multiple bonding
We can now look at the whole p-block at once. Moving across a period from group 13 to group 17, the nuclear charge rises while electrons enter the same shell, so atomic radius decreases and ionisation enthalpy and electronegativity increase; metallic character disappears. Ionisation enthalpy does not rise smoothly, however:
$$\text{period 2: }\ \mathrm{B\ 801\lt C\ 1086\lt N\ 1402\gt O\ 1314\lt F\ 1681\lt Ne\ 2080},$$ $$\text{period 3: }\ \mathrm{Al\ 577\lt Si\ 786\lt P\ 1012\gt S\ 1000\lt Cl\ 1256\lt Ar\ 1520}\quad(\mathrm{kJ\,mol^{-1}}).$$The dip from group 15 to group 16 is the half-filled $np^{3}$ effect described above (and boron, aluminium sit below beryllium and magnesium because an $np$ electron is easier to remove than an $ns$ electron).
Oxides. Across a period the oxides change from basic through amphoteric to acidic, and the acidity rises with the oxidation state of the element: period 3, $\mathrm{Na_{2}O,\ MgO}$ (basic) → $\mathrm{Al_{2}O_{3}}$ (amphoteric) → $\mathrm{SiO_{2}}$ (weakly acidic) → $\mathrm{P_{4}O_{10}}$ → $\mathrm{SO_{3}}$ → $\mathrm{Cl_{2}O_{7}}$ (increasingly strongly acidic). Down a group the oxides become more basic.
Hydrides. Across a period the hydrides of the p-block become more acidic as E becomes more electronegative: $\mathrm{CH_{4}}$ (neutral) → $\mathrm{NH_{3}}$ (basic) → $\mathrm{H_{2}O}$ (amphoteric) → $\mathrm{HF}$ (acidic). Down a group they become more acidic too (Results 10.4, 10.6), because the H–E bond weakens. So the strongest acid of all the simple hydrides is at the bottom right: $\mathrm{HI}$.
The first element, group by group. In every p-block group the period-2 element is the odd one out, for the reasons of Principle 10.2. The table collects the evidence from both sections of this chapter.
| Feature | First element (period 2) | Heavier members |
|---|---|---|
| Maximum covalency | 4: $\mathrm{[BF_{4}]^{-}}$, $\mathrm{CH_{4}}$, $\mathrm{NH_{4}^{+}}$; O and F lower still | 6 or more: $\mathrm{[AlF_{6}]^{3-}}$, $\mathrm{[SiF_{6}]^{2-}}$, $\mathrm{PCl_{5}}$, $\mathrm{SF_{6}}$, $\mathrm{IF_{7}}$ |
| Multiple bonds | $p\pi$–$p\pi$: $\mathrm{C{=}C}$, $\mathrm{N{\equiv}N}$, $\mathrm{O{=}O}$, $\mathrm{C{=}O}$ | poor $p\pi$–$p\pi$; $d\pi$–$p\pi$ with O: $\mathrm{P{=}O}$, $\mathrm{S{=}O}$ |
| Form of the element | $\mathrm{N_{2}}$, $\mathrm{O_{2}}$, $\mathrm{F_{2}}$: small molecules (gases) | $\mathrm{P_{4}}$, $\mathrm{S_{8}}$, networks, metals (solids) |
| E–E single bond | N–N, O–O, F–F weak (lone-pair repulsion) | P–P, S–S, Cl–Cl stronger |
| Electron gain enthalpy | O, F less negative than S, Cl | S, Cl most negative in their groups |
| Hydrides | $\mathrm{NH_{3}}$, $\mathrm{H_{2}O}$, $\mathrm{HF}$ hydrogen-bonded | no hydrogen bonding |
The pattern behind the "multiple bonding" row deserves one more sentence. A $\pi$ bond needs sideways overlap of two $p$ orbitals, which falls off quickly as the atoms (and bond lengths) grow; period-2 atoms are small enough for strong $p\pi$–$p\pi$ bonds, and heavier atoms are not. So the light elements build small multiply bonded molecules ($\mathrm{CO_{2}}$, $\mathrm{N_{2}}$, $\mathrm{O_{2}}$), and their heavier congeners build singly bonded chains, rings and networks ($\mathrm{SiO_{2}}$, $\mathrm{P_{4}}$, $\mathrm{S_{8}}$).
1. Most negative electron gain enthalpy. In group 17 it is Cl ($-349$), not F ($-333$); in group 16 it is S ($-200$), not O ($-141$). Order for halogens: $\mathrm{Cl\gt F\gt Br\gt I}$.
2. Bond enthalpy of the halogens. $\mathrm{Cl_{2}\gt Br_{2}\gt F_{2}\gt I_{2}}$ — F₂ is third, not first.
3. Oxidising power versus electron gain enthalpy. $\mathrm{F_{2}}$ is the strongest oxidant even though F has a less negative $\Delta_{eg}H$ than Cl: weak F–F bond plus very large hydration enthalpy of $\mathrm{F^{-}}$.
4. HF and $\mathrm{H_{2}O}$ are at both ends. They are the weakest acids of their groups but have the highest boiling points (hydrogen bonding). Down a group acid strength follows bond weakness, not electronegativity.
5. "Noble gases form no compounds". Xe (and Kr, Rn) do, with F and O; He, Ne and Ar do not. Xenon's oxidation states are even: $+2$, $+4$, $+6$, $+8$. And remember $\mathrm{XeF_{2}}$ is linear with three lone pairs.
Which statement about the first members of groups 15–17 is incorrect?
Exercises
Use the data tables in this section where numerical values are needed. Answers that are counts are whole numbers.
- 1 Write the electronic configuration of tellurium in full. How many electrons in a Te atom are in p orbitals?
- 2 What is the oxidation state of sulphur in $\mathrm{SF_{6}}$? Why does oxygen not form $\mathrm{OF_{6}}$?
- 3 Arrange $\mathrm{H_{2}O}$, $\mathrm{H_{2}S}$, $\mathrm{H_{2}Se}$, $\mathrm{H_{2}Te}$ in increasing acid strength and in decreasing thermal stability.
- 4 Arrange the same four hydrides in decreasing bond angle. By how many degrees does the angle in $\mathrm{H_{2}O}$ exceed that in $\mathrm{H_{2}S}$?
- 5 How many of $\mathrm{H_{2}O}$, $\mathrm{H_{2}S}$, $\mathrm{H_{2}Se}$, $\mathrm{H_{2}Te}$ have boiling points below $273\ \mathrm{K}$? Why is water so different?
- 6 Explain why the electron gain enthalpy of oxygen is less negative than that of sulphur.
- 7 Find the average oxidation state of sulphur in the tetrathionate ion, $\mathrm{S_{4}O_{6}^{2-}}$.
- 8 Explain why oxygen is a diatomic gas while sulphur is a solid made of $\mathrm{S_{8}}$ rings.
- 1 Arrange F, Cl, Br, I in decreasing order of (a) electronegativity, (b) magnitude of electron gain enthalpy, (c) atomic radius.
- 2 Arrange $\mathrm{F_{2}}$, $\mathrm{Cl_{2}}$, $\mathrm{Br_{2}}$, $\mathrm{I_{2}}$ in decreasing bond dissociation enthalpy and explain the position of $\mathrm{F_{2}}$.
- 3 By how many volts does $E^\circ(\mathrm{F_{2}/F^{-}})$ exceed $E^\circ(\mathrm{I_{2}/I^{-}})$? Which halide ions can $\mathrm{Br_{2}}$ oxidise?
- 4 How many of HF, HBr and HI have a higher boiling point than HCl? Arrange all four in increasing acid strength.
- 5 Why does fluorine show only the $-1$ oxidation state, while chlorine shows states up to $+7$?
- 6 Find the oxidation state of chlorine in $\mathrm{ClO_{2}}$ and in $\mathrm{Cl_{2}O_{7}}$.
- 7 Arrange $\mathrm{HOCl}$, $\mathrm{HClO_{2}}$, $\mathrm{HClO_{3}}$, $\mathrm{HClO_{4}}$ in increasing acid strength, and $\mathrm{HOCl}$, $\mathrm{HOBr}$, $\mathrm{HOI}$ in decreasing acid strength. Give the reason for each order.
- 8 Describe how the colour of the halogens changes down the group and give the reason.
- 9 How many lone pairs are on the chlorine atom in $\mathrm{ClF_{3}}$? Name the shape.
- 1 Write the valence configurations of He, Ne and Kr. Why is helium placed in group 18 although it has an $s^{2}$ configuration?
- 2 Explain why the boiling points of the noble gases increase down the group. By how many kelvin does the boiling point of xenon exceed that of argon?
- 3 Why are the electron gain enthalpies of the noble gases positive?
- 4 Explain, with data, why xenon forms compounds with fluorine while helium and neon do not.
- 5 Give the shapes of $\mathrm{XeF_{2}}$ and $\mathrm{XeF_{4}}$ and the total number of lone pairs on xenon in the two molecules together.
- 6 Find the sum of the oxidation states of xenon in $\mathrm{XeO_{3}}$, $\mathrm{XeOF_{4}}$ and $\mathrm{XeO_{4}}$.
- 7 What is the steric number of xenon in $\mathrm{XeF_{6}}$, and why is the molecule a distorted octahedron?
- 1 Going from B to Ne along period 2, how many times does the first ionisation enthalpy decrease from one element to the next? Explain the decrease.
- 2 Arrange $\mathrm{Na_{2}O}$, $\mathrm{Al_{2}O_{3}}$, $\mathrm{P_{4}O_{10}}$, $\mathrm{Cl_{2}O_{7}}$ in increasing acidic character.
- 3 Arrange $\mathrm{CH_{4}}$, $\mathrm{NH_{3}}$, $\mathrm{H_{2}O}$, $\mathrm{HF}$ in increasing acid strength.
- 4 Which has the highest boiling point among $\mathrm{NH_{3}}$, $\mathrm{H_{2}O}$ and $\mathrm{HF}$? Why does it beat HF, whose hydrogen bonds are individually stronger?
- 5 Explain, in terms of $\pi$ bonding, the contrast between each pair: $\mathrm{N_{2}}$/$\mathrm{P_{4}}$, $\mathrm{O_{2}}$/$\mathrm{S_{8}}$, $\mathrm{CO_{2}}$/$\mathrm{SiO_{2}}$.
- 6 How many of these cannot exist: $\mathrm{NF_{5}}$, $\mathrm{PF_{5}}$, $\mathrm{OF_{4}}$, $\mathrm{SF_{4}}$, $\mathrm{[BF_{6}]^{3-}}$, $\mathrm{[AlF_{6}]^{3-}}$, $\mathrm{ClF_{3}}$, $\mathrm{FCl_{3}}$?
- 7 In how many of $\mathrm{OF_{2}}$, $\mathrm{O_{2}F_{2}}$, $\mathrm{H_{2}O_{2}}$, $\mathrm{KO_{2}}$, $\mathrm{H_{2}O}$ is oxygen in a negative oxidation state?
- 8 Selenium (2.48) is slightly more electronegative than sulphur (2.44). Suggest a reason.
- 9 Explain why the most acidic simple hydride of the p-block is found at the bottom right (HI), although the most electronegative element is at the top right.
E1. JEE Main · MCQ The correct order of the magnitude of electron gain enthalpy of the halogens is (A) $\mathrm{F\gt Cl\gt Br\gt I}$ (B) $\mathrm{Cl\gt F\gt Br\gt I}$ (C) $\mathrm{Cl\gt Br\gt F\gt I}$ (D) $\mathrm{F\gt Cl\gt I\gt Br}$
E2. JEE Main · Numerical Find the total number of lone pairs on the xenon atoms in one molecule each of $\mathrm{XeF_{2}}$, $\mathrm{XeF_{4}}$, $\mathrm{XeF_{6}}$, $\mathrm{XeO_{3}}$ and $\mathrm{XeOF_{4}}$. Give the answer to the nearest integer.
E3. JEE Main · MCQ Which statement about the hydrides of group 16 is incorrect? (A) $\mathrm{H_{2}Te}$ is the strongest acid (B) $\mathrm{H_{2}O}$ has the largest bond angle (C) $\mathrm{H_{2}S}$ has the lowest boiling point (D) $\mathrm{H_{2}Te}$ is the most stable to heat
E4. JEE Main · Numerical How many of the following are known, stable compounds: $\mathrm{OF_{6}}$, $\mathrm{SF_{6}}$, $\mathrm{OF_{2}}$, $\mathrm{ClF_{3}}$, $\mathrm{FCl_{3}}$, $\mathrm{XeF_{4}}$, $\mathrm{HeF_{2}}$, $\mathrm{NeF_{2}}$, $\mathrm{KrF_{2}}$, $\mathrm{SCl_{6}}$? Give the answer to the nearest integer.
E5. JEE Main · MCQ Which of the following orders is correct? (A) Bond dissociation enthalpy: $\mathrm{F_{2}\gt Cl_{2}\gt Br_{2}\gt I_{2}}$ (B) Acid strength: $\mathrm{HF\gt HCl\gt HBr\gt HI}$ (C) Oxidising power: $\mathrm{F_{2}\gt Cl_{2}\gt Br_{2}\gt I_{2}}$ (D) Boiling point: $\mathrm{HI\gt HBr\gt HF\gt HCl}$
E6. JEE Main · Numerical Find the sum of the oxidation states of chlorine in $\mathrm{HOCl}$, $\mathrm{HClO_{2}}$, $\mathrm{HClO_{3}}$ and $\mathrm{HClO_{4}}$. Give the answer to the nearest integer.
Research question. Why is helium irreplaceable for cooling MRI scanners — and what does the group 18 boiling-point trend say about possible substitutes?
Why it matters. Hospitals worldwide keep the superconducting magnets of MRI scanners at about 4 K in liquid helium. Helium is extracted from natural gas in only a few countries, and supply shortages have pushed hospitals in Europe, North America and Asia towards helium-recycling and "low-helium" magnet designs. The choice of coolant is a direct application of how dispersion forces vary down a group.
What to do.
- Plot the boiling points of He, Ne, Ar, Kr, Xe and Rn (from this section) against atomic number, and against the van der Waals radius. Describe the trend and explain it in terms of polarisability.
- Look up the temperature below which a typical MRI superconductor (niobium–titanium) must be kept. Which noble gases are liquid at that temperature at 1 bar?
- Find, from open sources, the boiling points of liquid hydrogen and liquid nitrogen and compare them with helium and neon. Why is hydrogen a poor choice despite its low boiling point?
- Read one news or review article on helium recycling in hospitals and summarise the main approach in three sentences.
Tools: Spreadsheet or graph paper, the data table in this section, open-access articles and public data on helium supply.
Hand in: Your graph, a short explanation of the trend, your answer to "which coolants could work?", and the recycling summary.
Going further. Newer "high-temperature" superconductors work at around 20–77 K. Which coolants from groups 15 and 18 would then become possible, and why would that ease the helium problem?
🧪 Self-check quiz
Q1. The element with the most negative electron gain enthalpy is
Q2. The strongest oxidising agent among the halogens is $\mathrm{F_{2}}$ mainly because
Q3. HF is a weaker acid than HCl because
Q4. The shape of $\mathrm{XeF_{4}}$ and the number of lone pairs on Xe are
Q5. Which oxide is the most acidic?