Chapter 8 · Chemical Kinetics

8.2 Integrated Rate Laws and Half-Life

A rate law tells you how fast a reaction goes now; integrating it tells you how much is left after any time. For zero- and first-order reactions this gives straight-line plots, half-lives and the famous $k=\tfrac{2.303}{t}\log\tfrac{[\mathrm{A}]_{0}}{[\mathrm{A}]}$ — the tools for every JEE kinetics numerical.

A pharmacist wants to know when a bottle of eye drops will have lost 10% of its active ingredient. A doctor needs to know how long a dose of a drug stays above the effective level in the blood. An environmental agency must estimate how long a pesticide lingers in soil. None of these questions asks for a rate; each asks for a time or an amount left. The rate law of Section 8.1, $r=-d[\mathrm{A}]/dt=k[\mathrm{A}]^{n}$, is a differential equation: it tells us how fast $[\mathrm{A}]$ is changing at each moment. To answer "how much after a given time?" we must add up those changes — we must integrate the rate law.

In this section we integrate the two simplest and most important cases: zero-order reactions, whose rate does not depend on concentration, and first-order reactions, whose rate is proportional to it. Each gives a characteristic straight-line graph and a characteristic half-life. We then see how first-order reactions are followed in practice — by the total pressure of a gas, by titration, by optical rotation — meet pseudo-first-order reactions, and learn how the half-life reveals the order. You need the rate law, order and units of $k$ from Section 8.1; the effect of temperature on $k$ comes in Section 8.3.

Mathematics used in this section: $\ln x=2.303\log x$ (log = log to base 10); $\ln2=0.693$, $\log2=0.301$, $\log3=0.477$, $\log5=0.699$; $\int\dfrac{dx}{x}=\ln x+C$. For a reaction $\mathrm{A}\rightarrow\text{products}$ we write the rate law as $-d[\mathrm{A}]/dt=k[\mathrm{A}]^{n}$, so $k$ refers to the disappearance of A. Older books write $a$ for $[\mathrm{A}]_{0}$ and $a-x$ for $[\mathrm{A}]$ after an amount $x$ has reacted.

Zero-order reactions

A zero-order reaction runs at a constant rate, whatever the concentration of the reactant. That sounds strange — surely fewer molecules must react more slowly? — until you see where it happens. When ammonia decomposes on the surface of hot platinum at high pressure, the metal surface is completely covered with ammonia molecules; adding more gas cannot cover it any more, so the number of molecules reacting per second is fixed by the number of surface sites. The decomposition of HI on a gold surface, and enzyme reactions when the enzyme is saturated with substrate, behave in the same way. The reactant is in effect queuing for a limited number of "service counters".

Integration. For $\mathrm{A}\rightarrow\text{products}$ with $n=0$:

$$-\frac{d[\mathrm{A}]}{dt}=k\quad\Rightarrow\quad d[\mathrm{A}]=-k\,dt.$$

Integrating from $t=0$, where $[\mathrm{A}]=[\mathrm{A}]_{0}$, to time $t$:

$$\int_{[\mathrm{A}]_{0}}^{[\mathrm{A}]}d[\mathrm{A}]=-k\int_{0}^{t}dt\ \Rightarrow\ [\mathrm{A}]-[\mathrm{A}]_{0}=-kt.$$
📐 Result 8.5 — Integrated rate law of a zero-order reaction

For a zero-order reaction $\mathrm{A}\rightarrow\text{products}$ with rate constant $k$ (units $\mathrm{mol\,L^{-1}\,s^{-1}}$):

$$[\mathrm{A}]=[\mathrm{A}]_{0}-kt,\qquad k=\frac{[\mathrm{A}]_{0}-[\mathrm{A}]}{t}.$$
  • A graph of $[\mathrm{A}]$ against $t$ is a straight line of slope $-k$ and intercept $[\mathrm{A}]_{0}$; the rate–$[\mathrm{A}]$ graph is a horizontal line.
  • The equation holds only while A remains: the reaction is complete at $t=[\mathrm{A}]_{0}/k$, and stops abruptly there (in reality the order changes as the surface stops being saturated near the end).
  • Half-life: $t_{1/2}=\dfrac{[\mathrm{A}]_{0}}{2k}$ — proportional to the initial concentration.
📘 Definition 8.6 — Half-life

The half-life $t_{1/2}$ of a reaction is the time in which the concentration of a reactant falls to half its initial value, $[\mathrm{A}]=\tfrac12[\mathrm{A}]_{0}$. More generally, $t_{x\%}$ (for example $t_{75\%}$) is the time in which $x\%$ of the reactant has reacted.

Putting $[\mathrm{A}]=\tfrac12[\mathrm{A}]_{0}$ into Result 8.5 gives $\tfrac12[\mathrm{A}]_{0}=kt_{1/2}$, hence $t_{1/2}=[\mathrm{A}]_{0}/2k$. Because the amount removed per minute is fixed, each successive half-life is half as long as the one before: the second half-life (from $\tfrac12[\mathrm{A}]_{0}$ to $\tfrac14[\mathrm{A}]_{0}$) takes $[\mathrm{A}]_{0}/4k$.

✏️ Example 1 — Ammonia on a hot platinum wire
At high pressure, $\mathrm{2NH_{3}(g)\rightarrow N_{2}(g)+3H_{2}(g)}$ on a hot platinum surface is zero order, with $[\mathrm{NH_{3}}]$ falling at a constant $2.5\times10^{-4}\ \mathrm{mol\,L^{-1}\,s^{-1}}$. The initial concentration is $0.050\ \mathrm{mol\,L^{-1}}$. (a) Find $[\mathrm{NH_{3}}]$ after $60\ \mathrm{s}$. (b) Find the half-life and the time for complete decomposition (assuming the zero-order behaviour lasts). (c) What would the half-life be if the initial concentration were doubled? (d) Find $[\mathrm{H_{2}}]$ at $60\ \mathrm{s}$.
(a) $[\mathrm{NH_{3}}]=0.050-(2.5\times10^{-4})(60)=0.050-0.015=0.035\ \mathrm{mol\,L^{-1}}$.
(b) $t_{1/2}=\dfrac{0.050}{2(2.5\times10^{-4})}=100\ \mathrm{s}$; complete at $\dfrac{0.050}{2.5\times10^{-4}}=200\ \mathrm{s}$ — exactly two half-lives, because the first half-life takes 100 s and the "second" (to a quarter) only 50 s, and so on: $100+50+25+\dots=200$.
(c) $t_{1/2}\propto[\mathrm{A}]_{0}$: $200\ \mathrm{s}$.
(d) $0.015\ \mathrm{mol\,L^{-1}}$ of $\mathrm{NH_{3}}$ has reacted, giving $\tfrac32\times0.015=0.0225\ \mathrm{mol\,L^{-1}}$ of $\mathrm{H_{2}}$.

A zero-order reaction has a half-life of $20$ min when $[\mathrm{A}]_{0}=0.40\ \mathrm{mol\,L^{-1}}$. How long does it take for A to be used up completely?

First-order reactions

Most simple decompositions and isomerisations are first order: the decomposition of $\mathrm{N_{2}O_{5}}$, of $\mathrm{H_{2}O_{2}}$, of $\mathrm{SO_{2}Cl_{2}}$, the isomerisation of cyclopropane to propene. (The decay of radioactive nuclei follows the same law.) In a first-order reaction each molecule has the same, fixed chance of reacting in the next second, independent of how many others there are — so the number reacting per second is proportional to the number present.

Integration. With $n=1$:

$$-\frac{d[\mathrm{A}]}{dt}=k[\mathrm{A}]\quad\Rightarrow\quad\frac{d[\mathrm{A}]}{[\mathrm{A}]}=-k\,dt.$$

Integrating from $([\mathrm{A}]_{0},\,0)$ to $([\mathrm{A}],\,t)$:

$$\ln[\mathrm{A}]-\ln[\mathrm{A}]_{0}=-kt\ \Rightarrow\ \ln\frac{[\mathrm{A}]_{0}}{[\mathrm{A}]}=kt.$$
📐 Result 8.6 — Integrated rate law of a first-order reaction

For a first-order reaction $\mathrm{A}\rightarrow\text{products}$ with rate constant $k$ (units $\mathrm{s^{-1}}$, $\mathrm{min^{-1}}$, …):

$$k=\frac{1}{t}\ln\frac{[\mathrm{A}]_{0}}{[\mathrm{A}]}=\frac{2.303}{t}\log\frac{[\mathrm{A}]_{0}}{[\mathrm{A}]},$$ $$[\mathrm{A}]=[\mathrm{A}]_{0}\,e^{-kt}.$$

Between any two times, $k=\dfrac{2.303}{t_{2}-t_{1}}\log\dfrac{[\mathrm{A}]_{1}}{[\mathrm{A}]_{2}}$. Graphs: $[\mathrm{A}]$ against $t$ is an exponential decay that never quite reaches zero; $\ln[\mathrm{A}]$ against $t$ is a straight line of slope $-k$ and intercept $\ln[\mathrm{A}]_{0}$; $\log[\mathrm{A}]$ against $t$ has slope $-k/2.303$; $\log\dfrac{[\mathrm{A}]_{0}}{[\mathrm{A}]}$ against $t$ is a line through the origin of slope $k/2.303$; and the rate–$[\mathrm{A}]$ graph is a line through the origin of slope $k$.

Because only the ratio $[\mathrm{A}]_{0}/[\mathrm{A}]$ appears, any quantity proportional to the concentration can be used instead — moles, mass, partial pressure, a titre, an absorbance. This is the great practical convenience of first-order kinetics, and it is why $k$ has no concentration unit.

zero order first order [A] vs tslope −k rate vs [A]rate = k [A] vs t ln[A] vs tslope −k t½ vs [A]₀∝ [A]₀ t½ vs [A]₀constant rate vs [A]slope k ([A]₀ − [A]) vs tslope k
The graphs that identify zero-order (red) and first-order (blue) kinetics. The half-life graphs (dashed) are drawn against the initial concentration.

Half-life of a first-order reaction. Put $[\mathrm{A}]=\tfrac12[\mathrm{A}]_{0}$ into Result 8.6: $kt_{1/2}=\ln2$, so

$$t_{1/2}=\frac{\ln2}{k}=\frac{0.693}{k}.$$

The initial concentration has dropped out. Whether you start with a litre of $1\ \mathrm{mol\,L^{-1}}$ solution or a trace, half of it is gone after the same time; after $n$ half-lives a fraction $\left(\tfrac12\right)^{n}$ remains. The same logic gives every "fractional life":

📐 Result 8.7 — Half-life and fractional lives of a first-order reaction
$$t_{1/2}=\frac{0.693}{k},\quad\text{independent of }[\mathrm{A}]_{0};$$ $$\frac{[\mathrm{A}]}{[\mathrm{A}]_{0}}=\left(\frac12\right)^{t/t_{1/2}};$$ $$t_{x\%}=\frac{2.303}{k}\log\frac{100}{100-x}.$$
  • $t_{75\%}=\dfrac{2.303}{k}\log4=2\,t_{1/2}$, $\ t_{87.5\%}=3\,t_{1/2}$, $\ t_{93.75\%}=4\,t_{1/2}$.
  • $t_{90\%}=\dfrac{2.303}{k}$, $\ t_{99\%}=2\,t_{90\%}$, $\ t_{99.9\%}=3\,t_{90\%}\approx10\,t_{1/2}$ (exactly $9.97\,t_{1/2}$).
  • A first-order reaction is never complete in a finite time; "practically complete" usually means $99.9\%$, about ten half-lives.
✏️ Example 2 — Decomposition of dinitrogen pentoxide
In carbon tetrachloride solution at $318\ \mathrm{K}$, $\mathrm{N_{2}O_{5}}$ decomposes by first-order kinetics with $k=6.2\times10^{-4}\ \mathrm{s^{-1}}$. The initial concentration is $0.80\ \mathrm{mol\,L^{-1}}$. (a) Find the half-life. (b) Find $[\mathrm{N_{2}O_{5}}]$ after 30 minutes. (c) How long does it take for the concentration to fall to $0.10\ \mathrm{mol\,L^{-1}}$? (d) What is the rate of decomposition at the start and after 30 minutes?
Find $[\mathrm{N_{2}O_{5}}]$ after 30 minutes first:
(a) $t_{1/2}=\dfrac{0.693}{6.2\times10^{-4}}=1.12\times10^{3}\ \mathrm{s}$ (about 18.6 min).
(b) $t=1800\ \mathrm{s}$, $kt=1.116$: $\log\dfrac{[\mathrm{A}]_{0}}{[\mathrm{A}]}=\dfrac{1.116}{2.303}=0.4846$, so $\dfrac{[\mathrm{A}]_{0}}{[\mathrm{A}]}=3.05$ and $[\mathrm{N_{2}O_{5}}]=\dfrac{0.80}{3.05}=0.262\ \mathrm{mol\,L^{-1}}$.
(c) $0.80\to0.10$ is a factor of 8 $=2^{3}$: three half-lives, $3\times1118=3.35\times10^{3}\ \mathrm{s}$ (56 min). By formula: $t=\dfrac{2.303}{6.2\times10^{-4}}\log8=3.35\times10^{3}\ \mathrm{s}$ ✓.
(d) $r=k[\mathrm{A}]$: at the start $6.2\times10^{-4}\times0.80=5.0\times10^{-4}\ \mathrm{mol\,L^{-1}\,s^{-1}}$; after 30 min $6.2\times10^{-4}\times0.262=1.6\times10^{-4}\ \mathrm{mol\,L^{-1}\,s^{-1}}$ — the rate falls in proportion to the concentration.
✏️ Example 3 — From one data point to every fractional life
A first-order reaction is $20\%$ complete in $10$ min. Find (a) the rate constant, (b) the half-life, (c) the time for $75\%$ completion and (d) the time for $99.9\%$ completion. (e) What fraction is left after one hour?
(a) $20\%$ complete means $80\%$ left: $\dfrac{[\mathrm{A}]_{0}}{[\mathrm{A}]}=\dfrac{100}{80}=1.25$. $k=\dfrac{2.303}{10}\log1.25=\dfrac{2.303\times0.0969}{10}=2.23\times10^{-2}\ \mathrm{min^{-1}}$.
(b) $t_{1/2}=\dfrac{0.693}{0.0223}=31.1$ min.
(c) $t_{75\%}=2t_{1/2}=62.1$ min.
(d) $t_{99.9\%}=\dfrac{2.303}{k}\log1000=\dfrac{3\times2.303}{0.0223}=310$ min, i.e. $9.97\,t_{1/2}$ — about ten half-lives.
(e) $60$ min $=1.93\,t_{1/2}$: fraction left $=0.80^{6}=0.262$ (six 10-minute steps, each leaving 80%), i.e. about $26\%$.
⏱ Shortcut In equal time intervals a first-order reaction always removes the same fraction. Part (e) needs no logarithms at all.

In the concentration–time lab, choose first order with $k=0.035\ \mathrm{min^{-1}}$ and $[\mathrm{A}]_{0}=0.80\ \mathrm{mol\,L^{-1}}$, and note the half-life. Now halve $[\mathrm{A}]_{0}$ to $0.40$. What happens to the half-life?

First order, $k=0.035$: the readout shows $t_{1/2}=19.8$ min for $[\mathrm{A}]_{0}=0.80$ and still $19.8$ min for $0.40$, because $t_{1/2}=0.693/k$ contains no concentration. The half-life markers on the left graph are equally spaced, and the right-hand graph ($\ln[\mathrm{A}]$ against $t$) is a straight line of slope $-0.035$. Now switch to zero order with $k=0.010\ \mathrm{mol\,L^{-1}\,min^{-1}}$: $t_{1/2}=40.0$ min at $[\mathrm{A}]_{0}=0.80$ but $20.0$ min at $0.40$, the half-life markers crowd together, the $[\mathrm{A}]$–$t$ graph becomes the straight one and the $\ln[\mathrm{A}]$ graph curves down.
Interactive 1 — Concentration–Time Lab: Zero and First Order

Choose the order, the initial concentration and the rate constant. Left: $[\mathrm{A}]$ against $t$, with successive half-lives marked (dashed). Right: $\ln[\mathrm{A}]$ against $t$. Only one of the two graphs is straight — that is how the order is recognised from data. Press Play to run the clock; the readouts follow the moving point.

0.80 M0.035 min⁻¹
$[\mathrm{A}]$ at the moving point—
fraction remaining—
$t_{1/2}$ at this $[\mathrm{A}]_{0}$—
straight-line plot—

A first-order reaction has a half-life of $15$ min. What percentage of the reactant has reacted after $45$ min?

Following first-order reactions in the laboratory; pseudo-first-order reactions

To use Result 8.6 we need a measurable quantity that is proportional to $[\mathrm{A}]$, or a combination of measurements from which $[\mathrm{A}]$ can be worked out. Three methods are common in JEE problems.

1. Gas-phase decomposition followed by total pressure. Consider $\mathrm{A(g)}\rightarrow\mathrm{B(g)}+\mathrm{C(g)}$ in a closed vessel at constant volume and temperature. Only the total pressure $p_{t}$ is read on the gauge. Let the initial pressure (pure A) be $p_{0}$, and let A's partial pressure fall by $x$ at time $t$:

$\mathrm{A(g)}$$\rightarrow$$\mathrm{B(g)}$$+$$\mathrm{C(g)}$total
$t=0$$p_{0}$$0$$0$$p_{0}$
time $t$$p_{0}-x$$x$$x$$p_{t}=p_{0}+x$

So $x=p_{t}-p_{0}$ and $p_{\mathrm{A}}=p_{0}-x=2p_{0}-p_{t}$. Since partial pressure is proportional to concentration at constant $T$ and $V$,

$$k=\frac{2.303}{t}\log\frac{p_{0}}{2p_{0}-p_{t}}.$$
📐 Result 8.8 — First-order kinetics followed by pressure, titre or rotation

Gas, constant $V$ and $T$: if one molecule of A gives $n$ gas molecules in all ($\mathrm{A(g)}\rightarrow$ products, $n\gt1$), then $p_{t}=p_{0}+(n-1)x$ and

$$p_{\mathrm{A}}=\frac{np_{0}-p_{t}}{n-1},\qquad k=\frac{2.303}{t}\log\frac{p_{0}}{p_{\mathrm{A}}}.$$

The final pressure is $p_{\infty}=np_{0}$; then also $p_{\mathrm{A}}\propto p_{\infty}-p_{t}$ and $p_{0}\propto p_{\infty}-p_{0}$, so $k=\dfrac{2.303}{t}\log\dfrac{p_{\infty}-p_{0}}{p_{\infty}-p_{t}}$. ($n=2$ for $\mathrm{SO_{2}Cl_{2}\rightarrow SO_{2}+Cl_{2}}$; $n=2.5$ for $\mathrm{N_{2}O_{5}\rightarrow2NO_{2}+\tfrac12O_{2}}$.)

Titration of the reactant (e.g. $\mathrm{H_{2}O_{2}}$ with $\mathrm{KMnO_{4}}$; titre $V\propto[\mathrm{A}]$): $k=\dfrac{2.303}{t}\log\dfrac{V_{0}}{V_{t}}$.

Titration of a product (e.g. acid formed in ester hydrolysis, titrated with NaOH): $k=\dfrac{2.303}{t}\log\dfrac{V_{\infty}-V_{0}}{V_{\infty}-V_{t}}$.

Optical rotation (inversion of cane sugar): $k=\dfrac{2.303}{t}\log\dfrac{r_{0}-r_{\infty}}{r_{t}-r_{\infty}}$. In every case the expression is "(total change still to come at the start) ÷ (change still to come at $t$)".

✏️ Example 4 — Sulphuryl chloride in a closed flask
Sulphuryl chloride decomposes by first-order kinetics: $\mathrm{SO_{2}Cl_{2}(g)\rightarrow SO_{2}(g)+Cl_{2}(g)}$. Pure $\mathrm{SO_{2}Cl_{2}}$ is placed in a sealed flask at constant temperature at $0.50\ \mathrm{atm}$; after $100\ \mathrm{s}$ the total pressure is $0.60\ \mathrm{atm}$. (a) Find the rate constant. (b) Find the half-life. (c) What will the total pressure be after $300\ \mathrm{s}$, and after a very long time?
Find the rate constant before you open the solution:
Pressures $p_{t}=p_{0}+x$: $x=0.10\ \mathrm{atm}$, so $p_{\mathrm{SO_{2}Cl_{2}}}=0.50-0.10=0.40\ \mathrm{atm}$ ($=2p_{0}-p_{t}$).
(a) $k=\dfrac{2.303}{100}\log\dfrac{0.50}{0.40}=\dfrac{2.303\times0.0969}{100}=2.23\times10^{-3}\ \mathrm{s^{-1}}$.
(b) $t_{1/2}=\dfrac{0.693}{2.23\times10^{-3}}=311\ \mathrm{s}$.
(c) After $300\ \mathrm{s}$ the 100-s factor $0.80$ has acted three times: $p_{\mathrm{SO_{2}Cl_{2}}}=0.50\times0.80^{3}=0.256\ \mathrm{atm}$, so $p_{t}=2p_{0}-p_{\mathrm{A}}=1.00-0.256=0.744\ \mathrm{atm}$. After a very long time $p_{\infty}=2p_{0}=1.00\ \mathrm{atm}$.
Check Using the total pressure directly as if it were $[\mathrm{A}]$ ($\log\tfrac{0.60}{0.50}$) gives a wrong, negative-looking result — always convert $p_{t}$ to $p_{\mathrm{A}}$ first.

2. Pseudo-first-order reactions. Many reactions with two reactants behave as first-order reactions because one reactant is present in huge excess. In the acid-catalysed hydrolysis of ethyl acetate,

$$\mathrm{CH_{3}COOC_{2}H_{5}+H_{2}O\xrightarrow{H^{+}}}$$ $$\mathrm{CH_{3}COOH+C_{2}H_{5}OH},$$

the rate law is $r=k'[\mathrm{CH_{3}COOC_{2}H_{5}}][\mathrm{H_{2}O}]$. But the reaction is carried out in water: $[\mathrm{H_{2}O}]$ is about $55\ \mathrm{mol\,L^{-1}}$ and hardly changes while a $0.1\ \mathrm{mol\,L^{-1}}$ ester is hydrolysed. So $k'[\mathrm{H_{2}O}]$ is practically constant and $r=k[\mathrm{ester}]$ with $k=k'[\mathrm{H_{2}O}]$.

📘 Definition 8.7 — Pseudo-first-order reaction

A pseudo-first-order reaction is a reaction of higher order whose rate behaves as first order because every reactant except one is present in such large excess (or is held constant, like a catalyst) that its concentration does not change appreciably. The observed first-order constant contains the constant concentrations: $k_{\text{obs}}=k'[\mathrm{B}]$. The "order" seen therefore depends on the conditions — use comparable amounts of the reactants and the true second order reappears.

The second classic example is the inversion of cane sugar:

$$\mathrm{C_{12}H_{22}O_{11}+H_{2}O\xrightarrow{H^{+}}}$$ $$\mathrm{C_{6}H_{12}O_{6}\,(glucose)+C_{6}H_{12}O_{6}\,(fructose)}.$$

Sucrose solution rotates plane-polarised light to the right; the equimolar mixture of glucose and fructose rotates it to the left, because fructose is the stronger laevorotatory sugar. So the rotation falls from a positive value $r_{0}$ through zero to a negative final value $r_{\infty}$, and the "inverted" sign gives the reaction its name.

✏️ Example 5 — Hydrolysis of an ester followed by titration
A solution of methyl acetate in dilute hydrochloric acid is kept at $298\ \mathrm{K}$. Equal portions are titrated with the same NaOH solution: $19.3\ \mathrm{mL}$ at $t=0$, $24.3\ \mathrm{mL}$ at $t=20$ min, and $39.3\ \mathrm{mL}$ after the reaction is complete. (a) Explain what each titre measures. (b) Find the pseudo-first-order rate constant and the half-life. (c) Predict the titre at $t=60$ min. (d) Why is the reaction first order although water is a reactant?
Find the rate constant (in $\mathrm{min^{-1}}$) first:
(a) $V_{0}$ neutralises the HCl catalyst only. Each later titre also neutralises the acetic acid formed, so $V_{t}-V_{0}\propto$ ester hydrolysed. $V_{\infty}-V_{0}=20.0\ \mathrm{mL}\propto[\mathrm{ester}]_{0}$ and $V_{\infty}-V_{t}\propto[\mathrm{ester}]$ at time $t$.
(b) $k=\dfrac{2.303}{20}\log\dfrac{39.3-19.3}{39.3-24.3}=\dfrac{2.303}{20}\log\dfrac{20.0}{15.0}=\dfrac{2.303\times0.1249}{20}=1.44\times10^{-2}\ \mathrm{min^{-1}}$; $t_{1/2}=\dfrac{0.693}{0.0144}=48.2$ min.
(c) In 60 min (three 20-min intervals) the ester left falls to $20.0\times0.75^{3}=8.44\ \mathrm{mL}$-equivalents, so $V_{60}=39.3-8.4=30.9\ \mathrm{mL}$.
(d) Water is the solvent, about $55\ \mathrm{mol\,L^{-1}}$, and is used up only to the extent of the dilute ester; $[\mathrm{H_{2}O}]$ (and the catalyst $[\mathrm{H^{+}}]$) stay constant and are absorbed into $k$: a pseudo-first-order reaction.

In the pressure-gauge lab choose $\mathrm{SO_{2}Cl_{2}}$ with $p_{0}=0.50\ \mathrm{atm}$ and $k=2.0\times10^{-3}\ \mathrm{s^{-1}}$. What total pressure does the gauge show at the moment half of the $\mathrm{SO_{2}Cl_{2}}$ has decomposed?

Set $\mathrm{SO_{2}Cl_{2}}$, $p_{0}=0.50$, $k=2.0$: the readout shows $t_{1/2}=347\ \mathrm{s}$ and $p_{t}$ at $t_{1/2}$ $=0.750\ \mathrm{atm}$. At that moment $p_{\mathrm{SO_{2}Cl_{2}}}=0.25$, and $0.25\ \mathrm{atm}$ each of $\mathrm{SO_{2}}$ and $\mathrm{Cl_{2}}$ have formed: $0.25+0.25+0.25=0.75$. The final pressure is $p_{\infty}=1.00\ \mathrm{atm}$. Watch the "k from the gauge" readout while the clock runs: computed from $p_{0}$ and $p_{t}$ alone it stays at $2.00\times10^{-3}\ \mathrm{s^{-1}}$ at every moment — the signature of first-order kinetics. Switch to $\mathrm{N_{2}O_{5}}$ ($n=2.5$): at $t_{1/2}$ the gauge reads $0.875\ \mathrm{atm}$.
Interactive 2 — Pressure-Gauge Lab: A Gas Decomposing in a Sealed Flask

A pure gas A decomposes by first-order kinetics in a sealed flask at constant temperature; only the total pressure $p_{t}$ can be read. Choose the reaction — $\mathrm{SO_{2}Cl_{2}\rightarrow SO_{2}+Cl_{2}}$, $\mathrm{N_{2}O_{5}\rightarrow2NO_{2}+\tfrac12O_{2}}$, or di-tert-butyl peroxide $\rightarrow$ 2 propanone + ethane (each molecule of A gives $n$ gas molecules), the initial pressure and $k$. The flask shows A (red) turning into products (blue); the graph shows $p_{\mathrm{A}}$, the product pressure and the gauge reading $p_{t}$. The readouts recover $p_{\mathrm{A}}=\dfrac{np_{0}-p_{t}}{n-1}$ and $k$ from the gauge alone. Press Play to run the clock.

0.50 atm2.0 × 10⁻³ s⁻¹
gauge $p_{t}$ at time $t$—
$p_{\mathrm{A}}=(np_{0}-p_{t})/(n-1)$—
$k$ from the gauge—
$t_{1/2}$; $p_{t}$ at $t_{1/2}$; $p_{\infty}$—

For the first-order gas reaction $\mathrm{A(g)\rightarrow2B(g)+C(g)}$ at constant volume and temperature, the initial pressure of pure A is $p_{0}$ and the total pressure at time $t$ is $p_{t}$. The partial pressure of A at time $t$ is

Half-life and the order of a reaction

We now have two half-life formulas: $t_{1/2}=[\mathrm{A}]_{0}/2k$ for zero order (proportional to $[\mathrm{A}]_{0}$) and $t_{1/2}=0.693/k$ for first order (independent of $[\mathrm{A}]_{0}$). The pattern continues to higher orders. For a reaction of order $n$, a larger initial concentration makes the reaction faster by a factor $[\mathrm{A}]_{0}^{n}$ while there is $[\mathrm{A}]_{0}$ times more to get through, so the time to use up a fixed fraction scales as $[\mathrm{A}]_{0}/[\mathrm{A}]_{0}^{n}$:

📐 Result 8.9 — Dependence of half-life on initial concentration

For a reaction $\mathrm{A}\rightarrow\text{products}$ of order $n$ (one reactant, or all reactants at the same initial concentration):

$$t_{1/2}\propto\frac{1}{[\mathrm{A}]_{0}^{\,n-1}}=[\mathrm{A}]_{0}^{\,1-n}.$$
Order0123
$t_{1/2}$ varies as$[\mathrm{A}]_{0}$independent$1/[\mathrm{A}]_{0}$$1/[\mathrm{A}]_{0}^{2}$

Half-life method for the order: measure $t_{1/2}$ at two initial concentrations; then

$$\frac{(t_{1/2})_{1}}{(t_{1/2})_{2}}=\left(\frac{[\mathrm{A}]_{0,2}}{[\mathrm{A}]_{0,1}}\right)^{n-1},$$ $$n=1+\frac{\log\left[(t_{1/2})_{1}/(t_{1/2})_{2}\right]}{\log\left([\mathrm{A}]_{0,2}/[\mathrm{A}]_{0,1}\right)}.$$
🧭 Problem-solving strategy — Which order? Three tests on concentration–time data
  1. Constant differences in equal time intervals ($[\mathrm{A}]$ falls by the same amount each interval) → zero order; $[\mathrm{A}]$–$t$ is straight.
  2. Constant ratios in equal time intervals ($[\mathrm{A}]$ falls by the same fraction each interval) → first order; $\ln[\mathrm{A}]$–$t$ is straight, $k=\dfrac{2.303}{\Delta t}\log(\text{ratio})$.
  3. Half-lives: growing with $[\mathrm{A}]_{0}$ → zero; constant → first; shrinking as $1/[\mathrm{A}]_{0}$ → second (Result 8.9).
  4. Then use the right formula: Result 8.5 or 8.6. Convert "x% complete" into "(100 − x)% left", and keep $k$ and $t$ in the same time unit.
✏️ Example 6 — The order from half-lives
(a) For the decomposition of a gas on a metal surface, the half-life is $80$ min when the initial concentration is $0.40\ \mathrm{mol\,L^{-1}}$ and $40$ min when it is $0.20\ \mathrm{mol\,L^{-1}}$. Find the order, the rate constant and the time for complete decomposition starting from $0.40\ \mathrm{mol\,L^{-1}}$. (b) For another reaction $\mathrm{2A\rightarrow P}$, the half-life is $50\ \mathrm{s}$ at $[\mathrm{A}]_{0}=0.10$ and $25\ \mathrm{s}$ at $[\mathrm{A}]_{0}=0.20\ \mathrm{mol\,L^{-1}}$. Find the order and predict the half-life at $[\mathrm{A}]_{0}=0.050\ \mathrm{mol\,L^{-1}}$. (c) For a third reaction the half-life is the same at both concentrations. What does this tell you?
(a) Order Halving $[\mathrm{A}]_{0}$ halves $t_{1/2}$: $t_{1/2}\propto[\mathrm{A}]_{0}$, so $1-n=1$ and $n=0$.
(a) k $k=\dfrac{[\mathrm{A}]_{0}}{2t_{1/2}}=\dfrac{0.40}{2\times80}=2.5\times10^{-3}\ \mathrm{mol\,L^{-1}\,min^{-1}}$ (the same from the second run: $0.20/80$ ✓). Complete at $[\mathrm{A}]_{0}/k=160$ min.
(b) Doubling $[\mathrm{A}]_{0}$ halves $t_{1/2}$: $n=1+\dfrac{\log(50/25)}{\log(0.20/0.10)}=1+1=2$. At $0.050$ (half of $0.10$): $t_{1/2}=2\times50=100\ \mathrm{s}$.
(c) A half-life independent of $[\mathrm{A}]_{0}$ means first order (or pseudo-first order under the conditions used).
Note In (b) the coefficient 2 of A has nothing to do with the order; it only matters when converting between $-d[\mathrm{A}]/dt$ and the rate of reaction.
🚀 Beyond JEE Main: the integrated second-order law

Not in the JEE Main 2026 list, which names only the integrated forms of zero- and first-order reactions; the half-life trend of Result 8.9 is all you need for the exam. For interest: integrating $-d[\mathrm{A}]/dt=k[\mathrm{A}]^{2}$ gives $\dfrac{1}{[\mathrm{A}]}-\dfrac{1}{[\mathrm{A}]_{0}}=kt$, so a graph of $1/[\mathrm{A}]$ against $t$ is a straight line of slope $k$, and $t_{1/2}=\dfrac{1}{k[\mathrm{A}]_{0}}$ — the $1/[\mathrm{A}]_{0}$ dependence of the table above.

⚠️ JEE Main traps

1. ln versus log. $k=\dfrac{1}{t}\ln\dfrac{[\mathrm{A}]_{0}}{[\mathrm{A}]}=\dfrac{2.303}{t}\log\dfrac{[\mathrm{A}]_{0}}{[\mathrm{A}]}$. Mixing the two (for example $\dfrac{1}{t}\log$) gives an answer 2.303 times too small. The slope of $\log[\mathrm{A}]$ against $t$ is $-k/2.303$, not $-k$.

2. "Completed" versus "left". "$x\%$ complete" leaves $(100-x)\%$; the ratio in the formula is $\dfrac{100}{100-x}$, not $\dfrac{100}{x}$.

3. Half-life formula for the wrong order. $t_{1/2}=0.693/k$ is for first order only. A zero-order half-life depends on $[\mathrm{A}]_{0}$ ($[\mathrm{A}]_{0}/2k$), and a zero-order reaction finishes in $2t_{1/2}$.

4. Total pressure is not $p_{\mathrm{A}}$. Convert first: $p_{\mathrm{A}}=\dfrac{np_{0}-p_{t}}{n-1}$ ($2p_{0}-p_{t}$ for $\mathrm{A\rightarrow B+C}$). Also check the stoichiometry: $\mathrm{2N_{2}O_{5}\rightarrow4NO_{2}+O_{2}}$ gives $n=2.5$ per $\mathrm{N_{2}O_{5}}$.

5. Units of time. If $k$ is in $\mathrm{min^{-1}}$, $t$ must be in minutes. Zero-order $k$ carries concentration units; first-order $k$ does not, so first-order problems may give amounts in grams, moles or mL.

For a reaction $\mathrm{A}\rightarrow\text{products}$, the half-life halves when the initial concentration of A is doubled. The order of the reaction is

Exercises

Take $\ln2=0.693$ and $\ln x=2.303\log x$. "First order" means first order in the reactant named; gas reactions take place at constant volume and temperature.

I
Zero-order reactions.
  • 1 A zero-order reaction has $k=1.5\times10^{-3}\ \mathrm{mol\,L^{-1}\,s^{-1}}$ and $[\mathrm{A}]_{0}=0.30\ \mathrm{mol\,L^{-1}}$. Find $[\mathrm{A}]$ after $120\ \mathrm{s}$.
  • 2 For the reaction in part 1, find the half-life.
  • 3 For the reaction in part 1, find the time for complete reaction.
  • 4 A graph of $[\mathrm{A}]$ (in $\mathrm{mol\,L^{-1}}$) against $t$ (in min) is a straight line with slope $-4.0\times10^{-3}$ and intercept $0.60$. State the order and find $k$ and $t_{1/2}$.
  • 5 Explain, in terms of a metal surface, why the decomposition of a gas on the surface can be zero order at high pressure and first order at low pressure.
  • 6 HI decomposes on a gold surface by zero-order kinetics; $[\mathrm{HI}]$ falls from $0.40$ to $0.25\ \mathrm{mol\,L^{-1}}$ in $50$ min. How much longer will it take to fall to $0.10\ \mathrm{mol\,L^{-1}}$?
  • 7 A zero-order reaction has $t_{1/2}=40$ min when $[\mathrm{A}]_{0}=0.20\ \mathrm{mol\,L^{-1}}$. Find $t_{1/2}$ when $[\mathrm{A}]_{0}=0.50\ \mathrm{mol\,L^{-1}}$.
  • 8 What fraction of the reactant remains in a zero-order reaction at three-quarters of the time needed for complete reaction? Compare with a first-order reaction at three half-lives.
1 $[\mathrm{A}]=0.30-(1.5\times10^{-3})(120)=0.30-0.18=0.12\ \mathrm{mol\,L^{-1}}$.
2 $t_{1/2}=\dfrac{0.30}{2(1.5\times10^{-3})}=100\ \mathrm{s}$.
3 $\dfrac{[\mathrm{A}]_{0}}{k}=200\ \mathrm{s}$.
4 Straight $[\mathrm{A}]$–$t$: zero order; $k=4.0\times10^{-3}\ \mathrm{mol\,L^{-1}\,min^{-1}}$; $t_{1/2}=\dfrac{0.60}{2(4.0\times10^{-3})}=75$ min.
5 At high pressure every surface site is occupied, so the rate is fixed by the number of sites: zero order. At low pressure only a fraction of the sites is covered, and that fraction is proportional to the gas pressure, so the rate is proportional to the concentration: first order.
6 $k=\dfrac{0.15}{50}=3.0\times10^{-3}\ \mathrm{mol\,L^{-1}\,min^{-1}}$. From $0.25$ to $0.10$: $\dfrac{0.15}{3.0\times10^{-3}}=50$ min more.
7 $t_{1/2}\propto[\mathrm{A}]_{0}$: $40\times\dfrac{0.50}{0.20}=100$ min.
8 Zero order: $[\mathrm{A}]=[\mathrm{A}]_{0}(1-0.75)$, so $0.25$ (one quarter) remains. First order after three half-lives: $\tfrac18=0.125$ remains.
II
First-order reactions: rate constant, half-life, fractional lives.
  • 1 Find the half-life of a first-order reaction with $k=5.0\times10^{-3}\ \mathrm{s^{-1}}$.
  • 2 A first-order reaction has $t_{1/2}=30$ min. Find $k$.
  • 3 What percentage of a first-order reactant remains after five half-lives?
  • 4 For a first-order reaction with $k=0.0693\ \mathrm{min^{-1}}$, find the time for $90\%$ completion.
  • 5 A first-order reaction is $40\%$ complete in $50$ min. Find $k$ and $t_{1/2}$.
  • 6 How long does a first-order reaction with $t_{1/2}=12$ min take to be $87.5\%$ complete?
  • 7 Show that for a first-order reaction $t_{99\%}=2\,t_{90\%}$.
  • 8 In a first-order reaction $[\mathrm{A}]$ falls from $0.80$ to $0.20\ \mathrm{mol\,L^{-1}}$ in $40$ min. How long does it take to fall from $0.40$ to $0.10\ \mathrm{mol\,L^{-1}}$? What is $t_{1/2}$?
  • 9 For a first-order reaction with $k=2.0\times10^{-2}\ \mathrm{s^{-1}}$, find $[\mathrm{A}]/[\mathrm{A}]_{0}$ after $100\ \mathrm{s}$.
1 $t_{1/2}=\dfrac{0.693}{5.0\times10^{-3}}=138.6\ \mathrm{s}$.
2 $k=\dfrac{0.693}{30}=2.31\times10^{-2}\ \mathrm{min^{-1}}$.
3 $\left(\tfrac12\right)^{5}=\tfrac1{32}=3.125\%$.
4 $t=\dfrac{2.303}{0.0693}\log10=33.2$ min (that is $3.32\,t_{1/2}$, with $t_{1/2}=10$ min).
5 $60\%$ left: $k=\dfrac{2.303}{50}\log\dfrac{100}{60}=\dfrac{2.303\times0.2218}{50}=1.02\times10^{-2}\ \mathrm{min^{-1}}$; $t_{1/2}=\dfrac{0.693}{0.0102}=67.8$ min.
6 $87.5\%$ complete $=\tfrac18$ left $=3$ half-lives: $36$ min.
7 $t_{99\%}=\dfrac{2.303}{k}\log100=2\times\dfrac{2.303}{k}$ and $t_{90\%}=\dfrac{2.303}{k}\log10=\dfrac{2.303}{k}$, so the ratio is 2.
8 $0.80\to0.20$ is two half-lives, so $t_{1/2}=20$ min. $0.40\to0.10$ is also a factor of 4: again $40$ min (independent of the starting value).
9 $kt=2.0$: $\dfrac{[\mathrm{A}]}{[\mathrm{A}]_{0}}=e^{-2.0}=0.135$.
III
Following reactions: pressure, titration, rotation; pseudo-first-order reactions.
  • 1 $\mathrm{2N_{2}O_{5}(g)\rightarrow4NO_{2}(g)+O_{2}(g)}$ is first order. Pure $\mathrm{N_{2}O_{5}}$ at $0.40\ \mathrm{atm}$ gives a total pressure of $0.55\ \mathrm{atm}$ after $20$ min. Find $p_{\mathrm{N_{2}O_{5}}}$ at that time and $k$.
  • 2 In part 1, what is the total pressure when the reaction is complete?
  • 3 For the first-order reaction $\mathrm{A(g)\rightarrow2B(g)+C(g)}$, $p_{0}=0.40\ \mathrm{atm}$ and the total pressure after $10$ min is $0.48\ \mathrm{atm}$. After how long will the total pressure be $0.80\ \mathrm{atm}$?
  • 4 Equal portions of a decomposing $\mathrm{H_{2}O_{2}}$ solution need $25.0\ \mathrm{mL}$ of $\mathrm{KMnO_{4}}$ at $t=0$ and $15.0\ \mathrm{mL}$ at $t=20$ min. What volume will be needed at $t=40$ min?
  • 5 In the acid hydrolysis of an ester, titres of NaOH are $V_{0}=20.0\ \mathrm{mL}$, $V_{30\ \text{min}}=30.0\ \mathrm{mL}$ and $V_{\infty}=50.0\ \mathrm{mL}$. Find the rate constant and the half-life.
  • 6 During the inversion of cane sugar the rotation is $+24.0^{\circ}$ at the start, $+8.0^{\circ}$ after $60$ min and $-8.0^{\circ}$ at the end. Find the rate constant.
  • 7 The acid hydrolysis of a dilute ester is first order in ester, yet the true rate law is $r=k'[\mathrm{ester}][\mathrm{H_{2}O}]$. What would you observe if the ester and water were both $1\ \mathrm{mol\,L^{-1}}$ in an inert solvent? By what factor does the initial rate change if the ester concentration is doubled in water?
  • 8 State the conditions under which the total-pressure method of part 1 is valid.
1 Per $\mathrm{N_{2}O_{5}}$, $n=2.5$: $p_{\mathrm{A}}=\dfrac{2.5(0.40)-0.55}{1.5}=0.30\ \mathrm{atm}$. $k=\dfrac{2.303}{20}\log\dfrac{0.40}{0.30}=1.44\times10^{-2}\ \mathrm{min^{-1}}$.
2 $p_{\infty}=2.5\times0.40=1.00\ \mathrm{atm}$.
3 $n=3$: at 10 min $p_{\mathrm{A}}=\dfrac{1.20-0.48}{2}=0.36$, so $k=\dfrac{2.303}{10}\log\dfrac{0.40}{0.36}=1.054\times10^{-2}\ \mathrm{min^{-1}}$. $p_{t}=0.80$ gives $p_{\mathrm{A}}=\dfrac{1.20-0.80}{2}=0.20=\tfrac12p_{0}$: $t=t_{1/2}=\dfrac{0.693}{0.01054}=65.8$ min.
4 In each 20 min the titre is multiplied by $0.60$: $25.0\times0.60^{2}=9.0\ \mathrm{mL}$.
5 $k=\dfrac{2.303}{30}\log\dfrac{50.0-20.0}{50.0-30.0}=\dfrac{2.303}{30}\log1.5=1.35\times10^{-2}\ \mathrm{min^{-1}}$; $t_{1/2}=51.3$ min.
6 $\dfrac{r_{0}-r_{\infty}}{r_{t}-r_{\infty}}=\dfrac{32.0}{16.0}=2$: exactly one half-life in 60 min, $k=\dfrac{0.693}{60}=1.155\times10^{-2}\ \mathrm{min^{-1}}$.
7 With comparable amounts both concentrations fall, and the reaction shows its true second-order behaviour. In water, doubling the ester doubles the rate (factor 2): pseudo-first order.
8 Constant volume and temperature; the reactant and all products are gases behaving ideally; only the one reaction takes place (no side reactions), and the stoichiometry is known; the vessel initially contains only A (or the initial pressure of A is known).
IV
Finding the order; harder problems.
  • 1 For $\mathrm{A}\rightarrow$ products, $t_{1/2}=200\ \mathrm{s}$ at $[\mathrm{A}]_{0}=0.10$ and $100\ \mathrm{s}$ at $[\mathrm{A}]_{0}=0.20\ \mathrm{mol\,L^{-1}}$. Find the order.
  • 2 For another reaction $t_{1/2}=60$ min at $[\mathrm{A}]_{0}=0.50$ and $30$ min at $0.25\ \mathrm{mol\,L^{-1}}$. Find the order and $k$.
  • 3 Data: $t$ = 0, 10, 20, 30 min; $[\mathrm{A}]$ = 0.400, 0.300, 0.225, 0.169 $\mathrm{mol\,L^{-1}}$. Find the order and $k$.
  • 4 Data: $t$ = 0, 10, 20 min; $[\mathrm{A}]$ = 0.400, 0.340, 0.280 $\mathrm{mol\,L^{-1}}$. Find the order and $k$, and predict $[\mathrm{A}]$ at 50 min.
  • 5 Two first-order reactions with half-lives of 10 min and 20 min start with the same concentration. Find the ratio of their remaining concentrations after 60 min.
  • 6 Show that for a first-order reaction the time for the concentration to fall to $\tfrac1m$ of its initial value is $t_{1/2}\,\dfrac{\log m}{\log2}$, and use it to find the time for $99.9\%$ completion when $t_{1/2}=5.0$ min.
  • 7 A first-order reaction has $k=0.10\ \mathrm{min^{-1}}$. After how long has its rate fallen to one tenth of the initial rate?
  • 8 For the first-order reaction $\mathrm{A(g)\rightarrow B(g)+C(g)}$ with $k=2.31\times10^{-2}\ \mathrm{min^{-1}}$, after how long is the total pressure $1.5$ times the initial pressure?
1 Doubling $[\mathrm{A}]_{0}$ halves $t_{1/2}$: $n=1+\dfrac{\log2}{\log2}=2$.
2 $t_{1/2}\propto[\mathrm{A}]_{0}$: zero order; $k=\dfrac{0.50}{2\times60}=4.2\times10^{-3}\ \mathrm{mol\,L^{-1}\,min^{-1}}$.
3 Ratios $0.300/0.400=0.225/0.300=0.169/0.225=0.75$ — constant: first order. $k=\dfrac{2.303}{10}\log\dfrac43=2.88\times10^{-2}\ \mathrm{min^{-1}}$.
4 Equal differences ($0.060$ per 10 min): zero order, $k=6.0\times10^{-3}\ \mathrm{mol\,L^{-1}\,min^{-1}}$; at 50 min $[\mathrm{A}]=0.400-0.300=0.100\ \mathrm{mol\,L^{-1}}$.
5 After 60 min: $\left(\tfrac12\right)^{6}=\tfrac1{64}$ and $\left(\tfrac12\right)^{3}=\tfrac18$; ratio $\tfrac{1}{64}\div\tfrac18=0.125$.
6 $t=\dfrac{2.303}{k}\log m$ and $k=\dfrac{0.693}{t_{1/2}}=\dfrac{2.303\log2}{t_{1/2}}$, so $t=t_{1/2}\dfrac{\log m}{\log2}$. For $99.9\%$, $m=1000$: $t=5.0\times\dfrac{3}{0.301}=49.8$ min.
7 Rate $\propto[\mathrm{A}]$, so the rate falls to $\tfrac1{10}$ when $[\mathrm{A}]$ does: $t=\dfrac{2.303}{0.10}\log10=23.0$ min.
8 $p_{t}=1.5p_{0}$ gives $p_{\mathrm{A}}=2p_{0}-1.5p_{0}=0.5p_{0}$: one half-life, $t=\dfrac{0.693}{0.0231}=30$ min.
🎯 Exam corner JEE Main · MCQJEE Main · Numerical

E1. JEE Main · MCQ The half-life of a first-order reaction is $69.3\ \mathrm{s}$. The time required for $75\%$ of the reactant to be consumed is (A) $69.3\ \mathrm{s}$ (B) $138.6\ \mathrm{s}$ (C) $207.9\ \mathrm{s}$ (D) $103.9\ \mathrm{s}$

Idea $75\%$ consumed leaves $\tfrac14=\left(\tfrac12\right)^{2}$: two half-lives.
Value $2\times69.3=138.6\ \mathrm{s}$. (C) is three half-lives ($87.5\%$); (D) is $1.5\,t_{1/2}$, a linear (zero-order style) guess.
Answer (B).

E2. JEE Main · Numerical A first-order reaction is $50\%$ complete in $30$ min at a given temperature. How many minutes will it take to be $87.5\%$ complete at the same temperature? Give the answer to the nearest integer.

Half-life $t_{1/2}=30$ min, independent of concentration.
Count $87.5\%$ complete leaves $12.5\%=\tfrac18$: three half-lives, $90$ min.
Answer $90$.
⏱ Shortcut Learn the ladder: $50\%\to1$, $75\%\to2$, $87.5\%\to3$, $93.75\%\to4$ half-lives.

E3. JEE Main · MCQ For a zero-order reaction $\mathrm{A}\rightarrow$ products with rate constant $k$, which statement is correct? (A) Its half-life is independent of $[\mathrm{A}]_{0}$. (B) A graph of $\ln[\mathrm{A}]$ against $t$ is a straight line. (C) The units of $k$ are $\mathrm{s^{-1}}$. (D) The reaction is complete at $t=[\mathrm{A}]_{0}/k$.

Check (A), (B) and (C) describe a first-order reaction. For zero order $t_{1/2}=[\mathrm{A}]_{0}/2k$, $[\mathrm{A}]$–$t$ is straight, and $k$ is in $\mathrm{mol\,L^{-1}\,s^{-1}}$.
(D) $[\mathrm{A}]=[\mathrm{A}]_{0}-kt=0$ at $t=[\mathrm{A}]_{0}/k$ ✓.
Answer (D).

E4. JEE Main · Numerical The first-order decomposition $\mathrm{SO_{2}Cl_{2}(g)\rightarrow SO_{2}(g)+Cl_{2}(g)}$ is studied in a sealed vessel at constant temperature, starting from pure $\mathrm{SO_{2}Cl_{2}}$ at $0.40\ \mathrm{atm}$. After $60$ min the total pressure is $0.70\ \mathrm{atm}$. The rate constant is $x\times10^{-3}\ \mathrm{min^{-1}}$. Find $x$. Give the answer to the nearest integer.

Pressure $p_{\mathrm{SO_{2}Cl_{2}}}=2p_{0}-p_{t}=0.80-0.70=0.10\ \mathrm{atm}=\tfrac14p_{0}$.
k Two half-lives in 60 min: $t_{1/2}=30$ min, $k=\dfrac{0.693}{30}=2.31\times10^{-2}\ \mathrm{min^{-1}}=23.1\times10^{-3}$.
Answer $23$.
⏱ Shortcut Look for powers of 2 in $p_{0}/p_{\mathrm{A}}$ before reaching for logarithms.

E5. JEE Main · MCQ For a reaction $\mathrm{A}\rightarrow$ products, the half-life is found to vary as $[\mathrm{A}]_{0}^{-1/2}$. The order of the reaction is (A) $\tfrac12$ (B) $1$ (C) $\tfrac32$ (D) $2$

Rule $t_{1/2}\propto[\mathrm{A}]_{0}^{1-n}$: $1-n=-\tfrac12$.
Solve $n=\tfrac32$.
Answer (C).

E6. JEE Main · Numerical The rate constant of a first-order reaction is $4.606\times10^{-3}\ \mathrm{s^{-1}}$. How many seconds are needed to reduce $2.0\ \mathrm{g}$ of the reactant to $0.20\ \mathrm{g}$? Give the answer to the nearest integer.

Idea First order: only the ratio matters, so masses can be used directly: $\dfrac{[\mathrm{A}]_{0}}{[\mathrm{A}]}=\dfrac{2.0}{0.20}=10$.
Value $t=\dfrac{2.303}{4.606\times10^{-3}}\log10=500\ \mathrm{s}$.
Answer $500$.
⏱ Shortcut $t_{90\%}=2.303/k$: here $2.303/(4.606\times10^{-3})=500$ — no logarithm needed.
🔬 Research–Teaching NexusResearch-tutored · optional, about 60 minutes

Research question. Does the fading of a dye in alkaline solution follow first-order (pseudo-first-order) kinetics, and how does its half-life change with the concentration of the alkali?

Why it matters. Medicine regulators in every country require a shelf life for each drug, usually the time for 10% of the active ingredient to decompose, $t_{90}$ (for first-order loss $t_{90}=0.105/k$). Water-treatment engineers model the decay of chlorine and of pollutants with the same first-order laws, and food scientists use them for vitamin loss during storage. Measuring a rate constant from colour is the cheapest version of these industrial stability studies.

What to do.

  1. Under supervision, mix a very dilute solution of a violet dye such as crystal violet with dilute sodium hydroxide in large excess (so that $[\mathrm{OH^{-}}]$ stays constant — a pseudo-first-order reaction). The violet colour fades as the dye reacts.
  2. Place the cuvette or a small glass vial in front of a white phone screen or sheet and photograph it every 30 s; a free colour-picker or "colorimeter" app gives the intensity of the colour, which is proportional to the dye concentration over a modest range (calibrate with two or three dilutions of the dye).
  3. Plot $\ln(\text{intensity})$ against time. Is it a straight line? Find $k_{\text{obs}}$ from its slope and the half-life $0.693/k_{\text{obs}}$.
  4. Repeat with the alkali concentration halved and doubled. Plot $k_{\text{obs}}$ against $[\mathrm{OH^{-}}]$: a straight line through the origin means $k_{\text{obs}}=k'[\mathrm{OH^{-}}]$, i.e. the true rate law is first order in each reactant.
  5. Predict the time for 90% fading at one alkali concentration and check it.

Tools: Phone camera with a colour-picker app (or a cheap colorimeter), glass vials, measuring cylinders, stopwatch, spreadsheet for the log plots.

Hand in: Calibration data, the $\ln(\text{intensity})$–$t$ graphs, a table of $k_{\text{obs}}$ and $t_{1/2}$ at each alkali concentration, the deduced true rate law, and a paragraph on why the reaction looks first order.

Going further. Repeat at a warmer temperature (a water bath) and estimate how much $k$ increases — the subject of Section 8.3.

Instructor note: crystal violet in $0.01$–$0.05\ \mathrm{mol\,L^{-1}}$ NaOH fades over a few minutes at room temperature and gives clean pseudo-first-order plots; the dye stains and NaOH is corrosive, so gloves and goggles are needed and waste must be collected. Phone-camera intensities are roughly linear in concentration when the solution is pale; students who use very strong colours see curved plots and should dilute.

🧪 Self-check quiz

0/5 correct

Q1. For a first-order reaction, a graph of $\log[\mathrm{A}]$ against time has a slope of

Q2. The half-life of a zero-order reaction with initial concentration $[\mathrm{A}]_{0}$ and rate constant $k$ is

Q3. Which of these is a pseudo-first-order reaction?

Q4. What percentage of a first-order reactant remains after four half-lives?

Q5. For $\mathrm{A(g)\rightarrow B(g)+C(g)}$ (first order, constant $V$ and $T$), the initial pressure is $p_{0}$ and the total pressure at time $t$ is $p_{t}$. The rate constant is