19.2 Amino Acids, Proteins and Enzymes
Twenty α-amino acids, joined head to tail by peptide bonds, make every protein in your body. The order of the amino acids fixes how the chain coils, folds and packs — and that shape decides whether the protein carries oxygen, builds hair or works as an enzyme that speeds a reaction a billion-fold.
Hair, nails, silk and the tendons of your heel are proteins; so are the antibodies that fight an infection, the haemoglobin that carries oxygen in your blood, the insulin that controls blood sugar, and the enzymes in your saliva that start breaking down starch while you chew. Proteins make up about half of the dry mass of a cell. Dal, eggs, milk, fish and meat are eaten largely for their protein, which the body breaks down into its building blocks — the α-amino acids — and rebuilds into its own proteins.
In this section we look at amino acids as acids and bases (the zwitterion and the isoelectric point), join them through the peptide bond and learn to count peptide bonds, molar masses and possible sequences, then follow a protein chain through its four levels of structure, see what denaturation destroys, and end with enzymes — proteins that act as catalysts. You will use chirality from Section 14.2, amines from Section 18.1, acid–base equilibria and $\mathrm{p}K_{a}$ from Section 6.3, and activation energy from Section 8.3.
α-Amino acids
An amino acid contains both an amino group and a carboxyl group. In the amino acids that build proteins the amino group is on the carbon next to the carboxyl group — the α-carbon — so they are α-amino acids. They differ only in the side chain R on the α-carbon: hydrogen in glycine, methyl in alanine, a benzyl group in phenylalanine, a second carboxyl group in aspartic acid, an extra amino group in lysine.
An α-amino acid has the general formula $\mathrm{H_{2}N{-}CH(R){-}COOH}$: an amino group and a side chain R on the carbon α to the carboxyl group. About twenty of them are the building blocks of proteins. Except glycine ($\mathrm{R=H}$), the α-carbon carries four different groups and is chiral; the amino acids of proteins all have the L-configuration (NH₂ on the left in a Fischer projection with COOH at the top).
Amino acids that the human body can make are non-essential; those it cannot make, and which must be supplied in the diet, are essential amino acids. Ten are usually listed as essential: valine, leucine, isoleucine, phenylalanine, threonine, tryptophan, methionine, lysine, arginine and histidine (the last two are needed in the diet mainly during growth).
Amino acids are also classed by the groups they carry. Neutral amino acids have one amino and one carboxyl group (glycine, alanine, valine, serine); acidic amino acids have an extra carboxyl group (aspartic acid, glutamic acid); basic amino acids have an extra basic group (lysine, arginine, histidine). Each has a three-letter code and a one-letter code used to write protein sequences.
| Amino acid | Codes | Side chain R | Type | $M/\mathrm{g\,mol^{-1}}$ |
|---|---|---|---|---|
| glycine | Gly, G | –H | neutral | 75 |
| alanine | Ala, A | –CH₃ | neutral | 89 |
| valine* | Val, V | –CH(CH₃)₂ | neutral | 117 |
| leucine* | Leu, L | –CH₂CH(CH₃)₂ | neutral | 131 |
| isoleucine* | Ile, I | –CH(CH₃)CH₂CH₃ | neutral | 131 |
| phenylalanine* | Phe, F | –CH₂C₆H₅ | neutral | 165 |
| tryptophan* | Trp, W | –CH₂(indol-3-yl) | neutral | 204 |
| serine | Ser, S | –CH₂OH | neutral | 105 |
| threonine* | Thr, T | –CH(OH)CH₃ | neutral | 119 |
| cysteine | Cys, C | –CH₂SH | neutral | 121 |
| methionine* | Met, M | –CH₂CH₂SCH₃ | neutral | 149 |
| tyrosine | Tyr, Y | –CH₂C₆H₄OH | neutral | 181 |
| aspartic acid | Asp, D | –CH₂COOH | acidic | 133 |
| glutamic acid | Glu, E | –CH₂CH₂COOH | acidic | 147 |
| lysine* | Lys, K | –(CH₂)₄NH₂ | basic | 146 |
| arginine* | Arg, R | –(CH₂)₃NHC(=NH)NH₂ | basic | 174 |
| histidine* | His, H | –CH₂(imidazol-4-yl) | basic | 155 |
* essential amino acids. Molar masses with H 1, C 12, N 14, O 16, S 32.
Amino acids are salts inside. Amino acids are colourless crystalline solids that dissolve in water, hardly dissolve in non-polar solvents, and melt only with decomposition, typically above $200\ ^\circ\mathrm{C}$ — properties of an ionic compound, not of a small organic molecule with a carboxylic acid and an amine. The reason is an internal acid–base reaction: the acidic –COOH gives its proton to the basic –NH₂ of the same molecule.
A zwitterion (dipolar ion) is a species that carries both a positive and a negative charge but is electrically neutral overall: for an amino acid, $\mathrm{H_{3}N^{+}{-}CH(R){-}COO^{-}}$. It is the main form of an amino acid in the solid and in water near neutral pH.
The isoelectric point (pI) is the pH at which an amino acid (or a protein) carries no net charge — it exists mainly as the zwitterion — and does not move in an electric field. At this pH its solubility in water is lowest.
The zwitterion is amphoteric: its $\mathrm{{-}COO^{-}}$ can accept a proton (base) and its $\mathrm{{-}NH_{3}^{+}}$ can give one (acid). Add acid and the carboxylate is protonated, giving a cation; add base and the ammonium group loses its proton, giving an anion.
- pH below pI: net charge positive; the amino acid moves towards the cathode (negative electrode).
- pH = pI: net charge zero (zwitterion); no migration.
- pH above pI: net charge negative; it moves towards the anode.
Neutral amino acids have pI near 6 (glycine 6.0, alanine 6.0); acidic amino acids, with an extra –COOH to lose, have low pI (aspartic acid 2.8, glutamic acid 3.2); basic amino acids, with an extra group to protonate, have high pI (lysine 9.7, arginine 10.8). Separating amino acids by their migration at a chosen pH is called electrophoresis.
In the electrophoresis lab choose glycine and set pH $=2.0$. What net charge does the readout show, and which way does the spot move?
In a strongly acidic solution (pH 1), glycine exists mainly as
The peptide bond and polypeptides
The carboxyl group of one amino acid and the amino group of another can condense, with loss of water, to give an amide. In protein chemistry this amide link, $\mathrm{{-}CO{-}NH{-}}$, is called the peptide bond.
A peptide bond is the amide linkage $\mathrm{{-}CO{-}NH{-}}$ formed between the –COOH group of one α-amino acid and the –NH₂ group of another with elimination of a molecule of water. The product of two amino acids is a dipeptide, of three a tripeptide, and so on; each amino acid in the chain is called a residue. A chain of more than about ten residues is a polypeptide; a polypeptide of more than about a hundred residues (molar mass above roughly $10\,000\ \mathrm{g\,mol^{-1}}$) is called a protein.
A peptide is written from the residue with the free $\mathrm{{-}NH_{2}}$ group (the N-terminal, on the left) to the residue with the free –COOH group (the C-terminal, on the right): Gly-Ala means glycylalanine, $\mathrm{H_{2}NCH_{2}CO{-}NHCH(CH_{3})COOH}$.
Gly-Ala and Ala-Gly are different compounds — structural isomers with the same composition — because the free amino group sits on a different residue. The peptide bond itself is planar: the lone pair on nitrogen is delocalised into the C=O group, so the C–N bond has partial double-bond character (132 pm, between C–N 147 pm and C=N 127 pm), there is no free rotation about it, and the C=O, N–H and the two α-carbons lie in one plane. These rigid planar units, linked through the α-carbons where rotation is possible, are what the chain coils and folds.
For a linear (open-chain) peptide of $n$ residues:
$$\text{peptide bonds}=n-1,\qquad \text{water released (or needed to hydrolyse)}=n-1,$$ $$M_\text{peptide}=\sum M_\text{amino acids}-18\,(n-1)\ \mathrm{g\,mol^{-1}}.$$Number of possible sequences (each order is a different peptide):
- $n$ different amino acids, each used once: $n!$ (three → 6 tripeptides);
- a composition with repeats, $n_1$ of one kind, $n_2$ of another, …: $\dfrac{n!}{n_1!\,n_2!\cdots}$ (Gly₂Ala → 3);
- chains of length $n$ built from $k$ kinds with any number of repeats: $k^{n}$ (dipeptides from 20 amino acids: $400$).
- Composition: complete hydrolysis gives the amino acids and their ratio (and the length $n$).
- Ends: the N-terminal residue is the one with the free $\mathrm{{-}NH_{2}}$ (it can be tagged chemically); the C-terminal has the free –COOH.
- Overlap: partial hydrolysis gives short fragments; line them up so that the overlapping residues match, like pieces of a jigsaw.
- Check: the sequence must contain every fragment and the right composition.
In the peptide builder set the five slots to Gly, Ala, Val, —, —. What molar mass and how many sequences with the same composition does it report? Then change the second slot to Gly.
How many different dipeptides can be formed from glycine and alanine if each amino acid may be used more than once?
Structure of proteins and denaturation
Classification by shape. In fibrous proteins the polypeptide chains run parallel to one another and are held together by hydrogen bonds and disulphide links into long fibres; they are generally insoluble in water and do structural jobs — keratin in hair, wool and nails, collagen in tendons and skin, myosin in muscle, fibroin in silk. In globular proteins the chains coil and fold into a compact, roughly spherical shape; they are usually soluble in water and do the chemical work of the body — insulin, the albumins of egg white and blood, haemoglobin and almost all enzymes.
Four levels of structure. A protein's biological activity depends on its exact three-dimensional shape, which is described at four levels.
- Primary structure — the sequence of amino acids in each chain, fixed by covalent peptide bonds. Any change in it gives a different protein: replacing glutamic acid by valine at position 6 of each β-chain of haemoglobin causes sickle-cell anaemia.
- Secondary structure — the regular shape of short stretches of the chain, held by hydrogen bonds between peptide groups (N–H···O=C): the α-helix and the β-pleated sheet.
- Tertiary structure — the overall folding of the whole chain into fibres or a globule, held by interactions between side chains: hydrogen bonds, disulphide bridges (–S–S– between cysteine residues), ionic attractions (–COO⁻ ··· ⁺H₃N–), van der Waals forces and hydrophobic interactions (non-polar side chains packed inside, away from water).
- Quaternary structure — the arrangement of two or more folded chains (subunits) in a protein that has several, e.g. haemoglobin, made of four subunits (two α and two β chains).
The α-helix. The chain twists into a right-handed spiral. The C=O of each residue is hydrogen-bonded to the N–H of the residue four places further along, so every peptide group is H-bonded, and the H bonds run roughly parallel to the axis. There are 3.6 residues per turn and each turn rises 0.54 nm (0.15 nm per residue). The side chains point outwards. Keratin of hair and wool and many stretches of globular proteins are α-helical.
The β-pleated sheet. The chains are almost fully stretched and lie side by side; each is hydrogen-bonded to its neighbours, giving a sheet that is folded like a pleated paper fan, with side chains above and below the sheet. Neighbouring strands may run in the same or opposite directions. Silk fibroin is mostly β-sheet, which is why silk is strong but not stretchy.
Denaturation is the loss of the natural (native) shape of a protein caused by a physical or chemical change — heating, a change of pH, organic solvents, heavy-metal ions, strong agitation. The hydrogen bonds and other weak interactions that hold the secondary, tertiary and quaternary structure are broken, the chains unfold and often clump together (coagulate), and the protein loses its biological activity. The primary structure is unchanged: no peptide bond is broken.
Boiling an egg turns the clear, soluble albumin into a white solid — denaturation by heat, which cannot be undone. Milk curdles when bacteria turn lactose into lactic acid: the fall in pH denatures the protein casein. Cooking meat, sterilising instruments with heat and the stinging of alcohol on a wound all rely on denaturing proteins. A few small proteins, unfolded gently, fold back by themselves when the conditions are restored — evidence that the primary structure alone contains the instructions for the shape. Hydrolysis is a different process: acid, base or enzymes break the peptide bonds themselves and destroy even the primary structure, giving back amino acids.
When egg white is boiled and becomes solid, which level of protein structure survives?
Enzymes
Almost every reaction in a living cell — digesting food, copying DNA, contracting a muscle — would be far too slow at body temperature and neutral pH without a catalyst. The catalysts are enzymes, and nearly all of them are globular proteins.
An enzyme is a biological catalyst, almost always a globular protein, that speeds up a particular reaction in a living system without being used up. The molecule it acts on is its substrate; the substrate binds at a small region of the enzyme called the active site. Enzymes are usually named after the substrate or the reaction, with the ending -ase: maltase (hydrolyses maltose), invertase (sucrose), lactase (lactose), urease (urea), oxidoreductases (redox reactions).
- They lower the activation energy: the substrate binds in the active site, where groups of the enzyme hold it in the right orientation, strain the bonds that must break and stabilise the transition state. Like every catalyst an enzyme speeds the forward and backward reactions equally, so it does not change $\Delta G$, $\Delta H$ or the equilibrium constant.
- High specificity: the active site fits the shape and charges of one substrate (or a small family), like a key in a lock; the site can also adjust its shape slightly as the substrate binds (induced fit). Maltase hydrolyses maltose but not sucrose or lactose.
- High efficiency: rates are increased typically by factors of $10^{6}$–$10^{12}$ or more, and one enzyme molecule can turn over thousands of substrate molecules per second.
- Mild conditions and an optimum: activity is greatest at an optimum temperature (about $310\ \mathrm{K}$ for human enzymes) and an optimum pH. Above the optimum temperature, or far from the optimum pH, the enzyme is denatured and stops working.
| Enzyme | Reaction catalysed |
|---|---|
| invertase | $\mathrm{C_{12}H_{22}O_{11}\,(sucrose)+H_{2}O\rightarrow C_{6}H_{12}O_{6}\,(glucose)+C_{6}H_{12}O_{6}\,(fructose)}$ |
| maltase | $\mathrm{C_{12}H_{22}O_{11}\,(maltose)+H_{2}O\rightarrow 2\,C_{6}H_{12}O_{6}\,(glucose)}$ |
| diastase (amylase) | $\mathrm{2\,(C_{6}H_{10}O_{5})_{n}+n\,H_{2}O\rightarrow n\,C_{12}H_{22}O_{11}\,(maltose)}$ |
| zymase (yeast) | $\mathrm{C_{6}H_{12}O_{6}\rightarrow 2\,C_{2}H_{5}OH+2\,CO_{2}}$ |
| urease | $\mathrm{NH_{2}CONH_{2}+H_{2}O\rightarrow 2\,NH_{3}+CO_{2}}$ |
| pepsin (stomach, pH ≈ 2), trypsin (intestine, pH ≈ 8) | proteins → smaller peptides (hydrolysis of peptide bonds) |
The numbers behind "efficiency" come straight from the Arrhenius equation (Section 8.3). The acid-catalysed hydrolysis of sucrose has $E_a\approx107\ \mathrm{kJ\,mol^{-1}}$; with invertase it falls to about $36\ \mathrm{kJ\,mol^{-1}}$. If the pre-exponential factor stayed the same, the rate would rise by the factor $e^{\Delta E_a/RT}$.
1. Glycine is the exception. It is the only common α-amino acid without a chiral centre; all the others in proteins are L. Threonine and isoleucine have two chiral centres.
2. Direction of migration. Below the pI the amino acid is positive and moves to the cathode; above the pI it is negative and moves to the anode. Acidic amino acids have low pI, basic ones high pI.
3. Subtract water once per bond. $n$ residues, $n-1$ peptide bonds: $M=\sum M_i-18(n-1)$, not $-18n$. A protein of two chains has (total residues − 2) peptide bonds.
4. Order matters. Gly-Ala and Ala-Gly are different peptides; the N-terminal residue is written first. With repeats, divide $n!$ by the factorials of the repeat counts.
5. Denaturation is not hydrolysis. Denaturation breaks H bonds and other weak forces and destroys the secondary, tertiary and quaternary structure; the peptide bonds (primary structure) survive. Enzymes change rates, never $K$ or $\Delta G$.
Which statement about enzymes is correct?
Exercises
Molar masses ($\mathrm{g\,mol^{-1}}$): H 1, C 12, N 14, O 16, S 32; amino acids as in the table above. α-Helix: 3.6 residues per turn, 0.54 nm per turn.
- 1 Write the zwitterion of glycine and use it to explain why glycine melts with decomposition above $500\ \mathrm{K}$ and dissolves in water but not in benzene.
- 2 Classify as neutral, acidic or basic: glycine, aspartic acid, lysine, alanine, glutamic acid, serine.
- 3 How many chiral centres does threonine, $\mathrm{CH_{3}CH(OH)CH(NH_{2})COOH}$, have?
- 4 What is the net charge of glycine at pH 12?
- 5 Find the molar mass of lysine, $\mathrm{C_{6}H_{14}N_{2}O_{2}}$.
- 6 Towards which electrode does aspartic acid move at pH 7? Explain using its pI.
- 7 How many of these are essential amino acids: valine, glycine, leucine, alanine, lysine, serine, phenylalanine, glutamic acid?
- 8 Show with equations that alanine is amphoteric.
- 1 How many peptide bonds does a linear decapeptide contain?
- 2 Find the molar mass of Gly-Gly.
- 3 Find the molar mass of Ala-Ser-Lys.
- 4 Write the structures of Gly-Ala and Ala-Gly and mark the N-terminal residue of each. Are they the same compound?
- 5 How many tripeptides can be made from glycine, alanine and valine if each may be used any number of times?
- 6 How many different pentapeptides have the composition Gly₃Ala₂?
- 7 How many molecules of water are needed to hydrolyse completely a single polypeptide chain of 150 residues?
- 8 A polypeptide made only of glycine has molar mass $588\ \mathrm{g\,mol^{-1}}$. How many residues does it contain?
- 9 A tripeptide gives on partial hydrolysis Phe-Gly and Gly-Ser. Write its sequence and its full name.
- 1 Classify as fibrous or globular: keratin, insulin, myosin, albumin, haemoglobin, collagen.
- 2 Which interactions hold (a) the α-helix, (b) the β-pleated sheet, (c) the tertiary structure?
- 3 How many turns does an α-helix of 54 residues make?
- 4 How long (in nm) is the helix of part 3?
- 5 How many intrachain hydrogen bonds hold the helix of part 3?
- 6 How many polypeptide chains make up one molecule of haemoglobin, and which level of structure describes their arrangement?
- 7 In sickle-cell haemoglobin, glutamic acid (147) at position 6 of each β-chain is replaced by valine (117). By how much does the molar mass of the haemoglobin molecule change?
- 8 Explain why milk curdles when it turns sour, and what happens to the peptide bonds of the milk protein.
- 1 Define an enzyme and state three ways in which enzymes differ from ordinary inorganic catalysts.
- 2 Name the enzyme that catalyses: (a) sucrose → glucose + fructose, (b) maltose → glucose, (c) urea → ammonia + carbon dioxide, (d) glucose → ethanol + carbon dioxide.
- 3 Urease hydrolyses $6.0\ \mathrm{g}$ of urea completely. What volume of ammonia (in L at STP, $22.4\ \mathrm{L\,mol^{-1}}$) forms?
- 4 An enzyme lowers the activation energy of a reaction from $75\ \mathrm{kJ\,mol^{-1}}$ to $25\ \mathrm{kJ\,mol^{-1}}$. Find $\log_{10}$ of the factor by which the rate increases at $310\ \mathrm{K}$ (same pre-exponential factor).
- 5 Why does the activity of a human enzyme fall sharply above about $320\ \mathrm{K}$ and in strongly acidic or basic solution?
- 6 Explain, using the idea of the active site, why maltase does not hydrolyse lactose although both are disaccharides of the same formula.
- 7 What mass of ethanol is obtained when $90\ \mathrm{g}$ of glucose is fermented completely by zymase?
- 8 Pepsin works best at pH ≈ 2 and trypsin at pH ≈ 8. Suggest why each is suited to where it works.
E1. JEE Main · MCQ Which statement about α-amino acids is correct? (A) All naturally occurring α-amino acids are optically active. (B) In strongly basic solution they exist mainly as cations. (C) At the isoelectric point they move towards the cathode. (D) In the solid state they exist mainly as dipolar ions.
E2. JEE Main · Numerical Find the molar mass (in $\mathrm{g\,mol^{-1}}$) of the tripeptide Gly-Ala-Phe. (Molar masses: glycine 75, alanine 89, phenylalanine 165.) Give the answer to the nearest integer.
E3. JEE Main · MCQ When a globular protein is denatured by heat, (A) its peptide bonds are hydrolysed (B) its amino-acid sequence changes (C) its secondary and tertiary structures are lost while the primary structure is retained (D) only its quaternary structure is lost
E4. JEE Main · Numerical How many different linear tetrapeptides can be formed from glycine, alanine, valine and leucine if each amino acid is used exactly once in each tetrapeptide? Give the answer to the nearest integer.
E5. JEE Main · MCQ The α-helix of a protein is stabilised mainly by (A) hydrogen bonds between the C=O of one residue and the N–H of the fourth residue along the same chain (B) disulphide bridges between cysteine residues of neighbouring chains (C) hydrogen bonds between side chains of neighbouring chains (D) peptide bonds between side chains
E6. JEE Main · Numerical A linear polypeptide made only of glycine ($M=75$) and alanine ($M=89$) has molar mass $1583\ \mathrm{g\,mol^{-1}}$. On complete hydrolysis one molecule gives 15 molecules of glycine. How many alanine residues does it contain? Give the answer to the nearest integer.
Research question. At what temperature and pH does the enzyme catalase from a potato work fastest, and at what temperature is it destroyed?
Why it matters. Enzymes are now everyday industrial tools: in biological washing powders (which work at 30–40 °C, not in boiling water), in making cheese, fruit juice and high-fructose syrup, in paper and textile processing, and in medical diagnostics such as blood-glucose strips. Each process is run near the enzyme's optimum, and engineers search for enzymes from heat-loving microbes that survive higher temperatures. Catalase itself protects every cell by destroying hydrogen peroxide: $\mathrm{2H_{2}O_{2}(aq)\rightarrow2H_{2}O(l)+O_{2}(g)}$.
What to do.
- Cut equal discs (same mass) of raw potato. Place one in a boiling tube with 5 mL of 3% hydrogen peroxide and collect the oxygen over water in an inverted measuring cylinder (or a syringe) for 2 minutes.
- Repeat with the tube and peroxide pre-equilibrated in water baths at about 10, 20, 30, 40, 50, 60 and 70 °C. Plot the volume of oxygen against temperature.
- At room temperature, repeat with peroxide made up in buffers (or with a few drops of dilute acid or alkaline solution) at pH about 3, 5, 7, 9 and 11. Plot oxygen volume against pH.
- Boil a disc for 5 minutes, cool it and test it again. Explain the result with the idea of denaturation.
- Use the rising part of the temperature curve (10–30 °C) to estimate an activation energy with the Arrhenius equation, taking the initial rate as proportional to $k$.
Tools: potato, 3% hydrogen peroxide (pharmacy grade), boiling tubes, delivery tube, measuring cylinder or syringe, water baths and thermometer, pH paper, stopwatch.
Hand in: Two graphs (rate against temperature and against pH) with the optima marked; your activation-energy estimate; a paragraph explaining the shape of each curve in terms of collision theory and protein structure.
Going further. Fresh pineapple contains the protein-digesting enzyme bromelain. Make two bowls of gelatin (a protein) dessert, one with fresh and one with tinned (heated) pineapple, and explain why only one of them sets.
🧪 Self-check quiz
Q1. Which α-amino acid is optically inactive?
Q2. The peptide bond is
Q3. Which of these is a globular protein?
Q4. The number of peptide bonds in a linear tetrapeptide is
Q5. An amino acid with isoelectric point 9.7 is placed in a buffer of pH 6 between two electrodes. It