16.2 Substitution Mechanisms, Reactions and Environmental Effects
A nucleophile can replace the halogen of a haloalkane in one concerted step from the back (SN2, with inversion) or after the halide has left as a carbocation (SN1, with racemisation). This section shows which path wins and why, how elimination competes, what metals do to the C–X bond, how haloarenes react — and what chloroform, iodoform, freons and DDT have done for us and to us.
Shake 2-bromo-2-methylpropane with water and it turns into an alcohol within minutes; bromomethane under the same conditions barely changes, yet with hydroxide ions it is the faster of the two. Treat 2-bromobutane with aqueous potassium hydroxide and you get an alcohol; use alcoholic potassium hydroxide instead and you get mostly but-2-ene. Shine light on chloroform and it slowly turns into the war gas phosgene. Every one of these facts follows from the polar $\mathrm{C{-}X}$ bond of Section 16.1 and from the two ways in which a nucleophile can replace the halogen.
We first meet nucleophilic substitution and the one-step SN2 mechanism, then the two-step SN1 mechanism and the four factors that decide between them. Then come the reactions that compete with or extend substitution — elimination (Saytzeff's rule) and the reactions with sodium (Wurtz) and magnesium (Grignard reagents). Last, we see why haloarenes need electron-withdrawing groups before they undergo substitution, why a halogen on a ring directs to ortho and para positions although it deactivates the ring, and what the common polyhalogen compounds are used for and do to the environment. You will need carbocation stability and the electronic effects from Section 14.3 and chirality from Section 14.2.
Nucleophilic substitution and the SN2 mechanism
In a nucleophilic substitution an electron-rich species (the nucleophile, $\mathrm{Nu^{-}}$ or a neutral $\mathrm{Nu{:}}$) uses a lone pair to bond to the $\delta+$ carbon of $\mathrm{R{-}X}$ while the halogen departs with the bonding pair as a halide ion:
$$\mathrm{Nu^{-}+R{-}X\rightarrow R{-}Nu+X^{-}}$$The group that departs with the electron pair is the leaving group. A good leaving group is a weak base that is stable on its own: $\mathrm{I^{-}\gt Br^{-}\gt Cl^{-}\gg F^{-}}$ — the conjugate bases of the strongest acids leave most easily.
By changing the nucleophile, one alkyl halide becomes almost any functional group. The table collects the reactions JEE Main uses.
| Reagent | Nucleophile | Product | Class |
|---|---|---|---|
| $\mathrm{NaOH}$ or $\mathrm{KOH}$ (aq) | $\mathrm{HO^{-}}$ | $\mathrm{R{-}OH}$ | alcohol |
| $\mathrm{H_{2}O}$ | $\mathrm{H_{2}O}$ | $\mathrm{R{-}OH}$ | alcohol |
| $\mathrm{NaOR'}$ | $\mathrm{R'O^{-}}$ | $\mathrm{R{-}O{-}R'}$ | ether (Williamson synthesis) |
| $\mathrm{NaI}$ (acetone) | $\mathrm{I^{-}}$ | $\mathrm{R{-}I}$ | alkyl iodide |
| $\mathrm{NH_{3}}$ (excess) | $\mathrm{NH_{3}}$ | $\mathrm{R{-}NH_{2}}$ | primary amine |
| $\mathrm{KCN}$ | $\mathrm{{:}C{\equiv}N^{-}}$ (via C) | $\mathrm{R{-}C{\equiv}N}$ | nitrile (one more carbon) |
| $\mathrm{AgCN}$ | $\mathrm{Ag{-}C{\equiv}N{:}}$ (via N) | $\mathrm{R{-}N{\equiv}C}$ | isocyanide |
| $\mathrm{KNO_{2}}$ | $\mathrm{{}^{-}O{-}N{=}O}$ (via O) | $\mathrm{R{-}O{-}N{=}O}$ | alkyl nitrite |
| $\mathrm{AgNO_{2}}$ | $\mathrm{Ag{-}O{-}N{=}O}$ (via N) | $\mathrm{R{-}NO_{2}}$ | nitroalkane |
| $\mathrm{R'COOAg}$ | $\mathrm{R'COO^{-}}$ | $\mathrm{R'COOR}$ | ester |
| $\mathrm{LiAlH_{4}}$ | $\mathrm{H^{-}}$ | $\mathrm{R{-}H}$ | alkane |
| $\mathrm{R'C{\equiv}C^{-}Na^{+}}$ | $\mathrm{R'C{\equiv}C^{-}}$ | $\mathrm{R{-}C{\equiv}C{-}R'}$ | alkyne |
An ambident nucleophile has two different atoms that can donate an electron pair. Cyanide can attack through carbon or nitrogen ($\mathrm{{}^{-}{:}C{\equiv}N{:}\leftrightarrow{:}C{=}N{:}^{-}}$); nitrite through nitrogen or oxygen.
Which end attacks depends on the reagent. KCN and $\mathrm{KNO_{2}}$ are ionic: the free anion attacks with its more nucleophilic end — carbon for cyanide (a C–C bond is stronger than C–N), oxygen for nitrite (where the negative charge is concentrated) — giving the nitrile and the alkyl nitrite. AgCN and $\mathrm{AgNO_{2}}$ are largely covalent: carbon (or nitrogen) is tied up in the bond to silver, so the free lone pair on nitrogen attacks, giving the isocyanide and the nitroalkane.
How does the substitution actually happen? For bromomethane and hydroxide, doubling either concentration doubles the rate: the rate is first order in each reactant and second order overall. Both species must be present in the slow step — and that step is the only step.
SN2 = Substitution, Nucleophilic, bimolecular. The nucleophile attacks the carbon from the side opposite to the leaving group (backside attack) while the C–X bond breaks, in a single step through one transition state in which carbon is partly bonded to both Nu and X and its other three groups lie in one plane.
$$\text{rate}=k\,[\mathrm{R{-}X}]\,[\mathrm{Nu^{-}}]\qquad(\text{second order};\ k\text{ in }\mathrm{L\,mol^{-1}\,s^{-1}})$$The three groups flip over like an umbrella in the wind: the product has the inverted configuration (Walden inversion). Starting from one enantiomer of a chiral halide you get one enantiomer of the product, with the new group on the opposite side.
Because the nucleophile must reach the back of the carbon, bulky groups slow SN2 down (steric hindrance):
$$\mathrm{CH_{3}X}\gt1^{\circ}\gt2^{\circ}\gg3^{\circ}$$Approximate relative rates (ethyl = 1): methyl $30$, ethyl $1$, isopropyl $0.02$, tert-butyl too slow to measure. Branching on the next carbon also hinders: neopentyl bromide $\mathrm{(CH_{3})_{3}CCH_{2}Br}$, although primary, reacts about $10^{5}$ times more slowly than ethyl bromide.
For a given alkyl group: $\mathrm{R{-}I\gt R{-}Br\gt R{-}Cl\gg R{-}F}$ (leaving-group ability). SN2 is favoured by a strong, usually anionic nucleophile at high concentration and by a polar aprotic solvent (acetone, DMF, DMSO), which does not cage the anion with hydrogen bonds.
An optically active 2-bromooctane reacts with $\mathrm{NaOH}$ in aqueous acetone by the SN2 mechanism. The octan-2-ol formed is
The SN1 mechanism and what decides the path
2-Bromo-2-methylpropane reacts with water at a rate that does not change when hydroxide is added: the rate depends on the halide alone. The slow step must involve only the halide.
SN1 = Substitution, Nucleophilic, unimolecular. It takes two steps: (1) slow heterolysis of the C–X bond to a carbocation and a halide ion; (2) fast attack of the nucleophile on the carbocation (followed, with water or an alcohol, by loss of $\mathrm{H^{+}}$).
$$\text{rate}=k\,[\mathrm{R{-}X}]\qquad(\text{first order};\ k\text{ in }\mathrm{s^{-1}})$$The carbocation is $sp^{2}$ and planar, so the nucleophile can attack either face. A single enantiomer of a chiral halide gives an (almost) racemic product — racemisation. In practice a slight excess of the inverted product is usually found, because the departing halide briefly shields the front face.
The rate is set by the stability of the carbocation (inductive effect and hyperconjugation of alkyl groups; resonance for allyl and benzyl):
$$3^{\circ}\gt2^{\circ}\gt1^{\circ}\gt\mathrm{CH_{3}X}$$Relative rates of solvolysis of alkyl bromides in methanoic acid (methyl $=1$): ethyl $1.7$, isopropyl $45$, tert-butyl about $10^{8}$. Allylic and benzylic halides react quickly by SN1 because their cations are resonance-stabilised ($\mathrm{CH_{2}{=}CH{-}CH_{2}^{+}\leftrightarrow{}^{+}CH_{2}{-}CH{=}CH_{2}}$); being primary, they react quickly by SN2 too. Benzylic stability rises with further aryl groups: $\mathrm{(C_{6}H_{5})_{3}C^{+}\gt(C_{6}H_{5})_{2}CH^{+}\gt C_{6}H_{5}CH_{2}^{+}}$. Vinylic and aryl halides react by neither path.
| Factor | Favours SN2 | Favours SN1 |
|---|---|---|
| substrate | $\mathrm{CH_{3}X}$, $1^{\circ}$ (little crowding) | $3^{\circ}$, allylic, benzylic (stable cation) |
| nucleophile | strong, anionic, concentrated ($\mathrm{HO^{-}}$, $\mathrm{RO^{-}}$, $\mathrm{CN^{-}}$, $\mathrm{I^{-}}$) | weak, neutral ($\mathrm{H_{2}O}$, $\mathrm{ROH}$) — solvolysis |
| solvent | polar aprotic (acetone, DMF, DMSO) | polar protic (water, alcohols, methanoic acid) — solvates both ions |
| leaving group | a better leaving group ($\mathrm{I^{-}\gt Br^{-}\gt Cl^{-}}$) speeds up both mechanisms | |
$2^{\circ}$ halides sit on the border: strong nucleophile in an aprotic solvent → SN2; water or alcohol as solvent and nucleophile → SN1.
- Look at the carbon carrying X. $sp^{2}$ (vinyl, aryl)? No ordinary substitution. Methyl or $1^{\circ}$ (not allylic/benzylic)? SN2. $3^{\circ}$? SN1 (or elimination with a strong base).
- For $2^{\circ}$, allylic and benzylic halides read the conditions: anionic nucleophile + aprotic solvent → SN2; neutral nucleophile that is also the solvent → SN1.
- Stereochemistry follows the path: SN2 → inversion; SN1 → racemisation.
- Rate law follows the path: SN2 depends on [Nu]; SN1 does not.
In the animator choose SN2. If the substrate is changed from bromomethane to 2-bromopropane, by roughly what factor does the SN2 rate fall?
Which change speeds up the SN1 hydrolysis of 2-bromo-2-methylpropane?
Elimination and reactions with metals
A hydroxide or alkoxide ion is both a nucleophile and a strong base. Instead of attacking carbon it may pull off a proton from the carbon next to the C–X carbon, and the halide leaves at the same time: an alkene forms.
Heating a haloalkane with a strong base in alcohol (alcoholic KOH, sodium ethoxide) removes HX from two adjacent carbons: X from the α-carbon (the one carrying X) and H from a β-carbon (a carbon bonded to it):
$$\mathrm{R{-}CH_{2}{-}CH_{2}{-}X+KOH\xrightarrow[\Delta]{\text{alcohol}}R{-}CH{=}CH_{2}+KX+H_{2}O}$$Ease of elimination: $3^{\circ}\gt2^{\circ}\gt1^{\circ}$ and $\mathrm{R{-}I\gt R{-}Br\gt R{-}Cl}$.
When a haloalkane has more than one kind of β-hydrogen, the major product is the more substituted alkene — the one with more alkyl groups on the doubly bonded carbons. Equivalently, the hydrogen is lost preferentially from the β-carbon that has fewer hydrogens. More alkyl groups mean more hyperconjugation and a more stable alkene; where E/Z isomers exist, the trans (E) form usually predominates.
$$\mathrm{CH_{3}CH_{2}CH(Br)CH_{3}\xrightarrow[\Delta]{\text{alc. KOH}}\underset{\text{major, about }80\,\%}{\mathrm{CH_{3}CH{=}CHCH_{3}}}+\underset{\text{minor}}{\mathrm{CH_{3}CH_{2}CH{=}CH_{2}}}}$$Substitution or elimination? Both happen together; conditions tip the balance. Elimination is favoured by a strong, concentrated base in alcohol, high temperature and a crowded ($3^{\circ}$) halide — a $3^{\circ}$ halide with alcoholic KOH gives almost only alkene. Substitution is favoured by aqueous solution, lower temperature, a good nucleophile that is a weak base ($\mathrm{I^{-}}$, $\mathrm{CN^{-}}$) and a $1^{\circ}$ halide. The memory line: aqueous KOH substitutes, alcoholic KOH eliminates.
Choose 2-bromo-3-methylbutane, $\mathrm{CH_{3}CH(Br)CH(CH_{3})_{2}}$. With alcoholic KOH, which alkene will the widget mark as the Saytzeff product?
Reactions with metals. Electropositive metals reverse the polarity of the carbon: they hand it electrons.
- Wurtz reaction. Two alkyl halides couple when heated with sodium in dry ether: $\mathrm{2R{-}X+2Na\xrightarrow{\text{dry ether}}R{-}R+2NaX}$. It makes symmetrical alkanes with an even number of carbons ($\mathrm{2CH_{3}CH_{2}Br\rightarrow}$ butane). A mixture of two different halides gives three alkanes ($\mathrm{R{-}R}$, $\mathrm{R'{-}R'}$, $\mathrm{R{-}R'}$), which is why it is not used for unsymmetrical alkanes.
- Wurtz–Fittig and Fittig reactions. An aryl halide and an alkyl halide with sodium in dry ether give an alkylarene: $\mathrm{C_{6}H_{5}Cl+CH_{3}Cl+2Na}$ $\rightarrow$ $\mathrm{C_{6}H_{5}CH_{3}+2NaCl}$ (Wurtz–Fittig). Two aryl halides give a biaryl: $\mathrm{2C_{6}H_{5}Cl+2Na}$ $\rightarrow$ $\mathrm{C_{6}H_{5}{-}C_{6}H_{5}+2NaCl}$ (Fittig).
An alkyl or aryl halide reacts with magnesium turnings in dry ether to give an alkyl- (or aryl-)magnesium halide, $\mathrm{R{-}MgX}$, a Grignard reagent: $\mathrm{R{-}X+Mg\xrightarrow{\text{dry ether}}R{-}MgX}$. Reactivity of the halide: $\mathrm{I\gt Br\gt Cl}$. The ether solvates and stabilises the magnesium.
In $\mathrm{C{-}Mg}$ the carbon is the negative end ($\delta-$C–Mg$\delta+$): the carbon behaves as a carbanion — a very strong base and a good nucleophile. Any compound with a hydrogen on O, N, S or a terminal alkyne carbon ("active hydrogen") destroys it, releasing the alkane: $\mathrm{RMgX+H_{2}O\rightarrow RH+Mg(OH)X}$. That is why apparatus and reagents must be dry. Its uses in making alcohols are met in Section 17.3.
2-Bromobutane is heated with alcoholic KOH. The major product is
Reactions of haloarenes; uses and effects of polyhalogen compounds
Nucleophilic substitution in haloarenes. Rule 16.2 explained why chlorobenzene shrugs off hydroxide under ordinary conditions. It can be forced: with aqueous NaOH at about $623\ \mathrm{K}$ and $300\ \mathrm{atm}$ it gives sodium phenoxide, which acidification turns into phenol. The reaction becomes easy when an electron-withdrawing group such as $\mathrm{{-}NO_{2}}$ sits ortho or para to the halogen.
Nucleophilic substitution goes by addition of the nucleophile (giving a carbanion in which the ring has lost its aromaticity) followed by loss of $\mathrm{X^{-}}$. Electron-withdrawing groups ortho/para to X stabilise the carbanion by resonance and lower the temperature needed; each extra nitro group helps further. Hydrolysis to the phenol: chlorobenzene about $623\ \mathrm{K}$ (high pressure); 1-chloro-4-nitrobenzene about $443\ \mathrm{K}$; 1-chloro-2,4-dinitrobenzene about $368\ \mathrm{K}$; 2-chloro-1,3,5-trinitrobenzene with warm water. A meta nitro group cannot take the charge and helps only slightly (by its $-I$ effect).
Electrophilic substitution: the halogen is deactivating yet ortho/para-directing. Its $-I$ effect withdraws electron density from the whole ring (slower than benzene); its $+R$ effect (the resonance of Section 16.1) puts extra density on the ortho and para carbons and stabilises the cations formed by attack there. $-I$ wins for the rate, $+R$ decides the orientation; the para product usually predominates (less crowding).
The usual electrophilic reactions of chlorobenzene therefore give mainly 1,4- with some 1,2-products:
$$\mathrm{C_{6}H_{5}Cl\xrightarrow[\text{anhyd. }FeCl_{3}]{Cl_{2}}}\ \text{1,4- (major) and 1,2-dichlorobenzene}\qquad\mathrm{C_{6}H_{5}Cl\xrightarrow{conc.\ HNO_{3}/H_{2}SO_{4}}}\ \text{1-chloro-4-nitrobenzene (major)}$$ $$\mathrm{C_{6}H_{5}Cl\xrightarrow{conc.\ H_{2}SO_{4}}}\ \text{4-chlorobenzenesulphonic acid}\qquad\mathrm{C_{6}H_{5}Cl\xrightarrow[\text{anhyd. }AlCl_{3}]{CH_{3}COCl}}\ \text{1-(4-chlorophenyl)ethan-1-one (major)}$$Friedel–Crafts methylation with $\mathrm{CH_{3}Cl}$/anhydrous $\mathrm{AlCl_{3}}$ gives 1-chloro-4-methylbenzene (major) and 1-chloro-2-methylbenzene.
Polyhalogen compounds: uses and environmental effects.
- Dichloromethane $\mathrm{CH_{2}Cl_{2}}$: solvent for paint stripping, degreasing and drug manufacture, aerosol propellant. High exposure affects the central nervous system (dizziness, impaired hearing and vision) and burns the skin.
- Trichloromethane (chloroform) $\mathrm{CHCl_{3}}$: solvent for fats, alkaloids, iodine; used to make the refrigerant $\mathrm{CHClF_{2}}$ (R-22). Once a general anaesthetic, abandoned because it damages the liver and heart. In light and air it is slowly oxidised to the very poisonous phosgene (carbonyl chloride): $\mathrm{2CHCl_{3}+O_{2}\xrightarrow{\text{light}}2COCl_{2}+2HCl}$. It is therefore stored in closed, dark-coloured bottles filled to the brim; about 1 % ethanol is added, which converts any phosgene into harmless diethyl carbonate.
- Triiodomethane (iodoform) $\mathrm{CHI_{3}}$: a yellow solid once used as an antiseptic on wounds. The antiseptic action comes from the iodine it releases, not from iodoform itself; its strong, unpleasant smell led to its replacement by other iodine preparations. (Its formation is the iodoform test, met with carbonyl compounds.)
- Tetrachloromethane $\mathrm{CCl_{4}}$: formerly a cleaning fluid, fire-extinguisher fluid and feedstock for refrigerants. Causes liver damage, nervous-system effects and possibly cancer; released into air it reaches the stratosphere and depletes ozone.
- Freons — chlorofluorocarbons (CFCs) such as $\mathrm{CCl_{2}F_{2}}$ (freon-12), made from $\mathrm{CCl_{4}}$ by the Swarts reaction: non-toxic, non-flammable, non-corrosive and very stable, hence used in refrigerators, air-conditioners and aerosol cans. Their stability is the problem: they survive long enough to diffuse into the stratosphere, where ultraviolet light breaks the C–Cl bond, and the chlorine atoms destroy ozone in a chain: $\mathrm{Cl^{\bullet}+O_{3}\rightarrow ClO^{\bullet}+O_{2}}$, $\ \mathrm{ClO^{\bullet}+O\rightarrow Cl^{\bullet}+O_{2}}$. The chlorine atom is regenerated, so one atom can destroy many thousands of ozone molecules. They have been phased out under the Montreal Protocol (1987).
- DDT (p,p′-dichlorodiphenyltrichloroethane): the first chlorinated insecticide, very effective against the mosquitoes that spread malaria and the lice that carry typhus (Nobel Prize to Paul Müller, 1948). Insects became resistant; and DDT is not biodegradable and is fat-soluble, so it is stored in fatty tissue and its concentration rises at each step of a food chain (biomagnification), harming fish-eating birds. It was banned in many countries from the 1970s; limited use against malaria mosquitoes continues where no alternative exists.
1. Silver versus potassium salts. KCN → nitrile R–CN, AgCN → isocyanide R–NC; $\mathrm{KNO_{2}}$ → alkyl nitrite R–ONO, $\mathrm{AgNO_{2}}$ → nitroalkane R–NO₂.
2. Rate laws. SN1: rate $=k[\mathrm{RX}]$ — changing [Nu] changes nothing. SN2: rate $=k[\mathrm{RX}][\mathrm{Nu}]$. Do not multiply in the nucleophile factor for a $3^{\circ}$ halide.
3. Aqueous vs alcoholic KOH. Aqueous → alcohol (substitution); alcoholic, heat → alkene (elimination, Saytzeff product). A $3^{\circ}$ halide with a strong base gives mainly alkene.
4. Applying Saytzeff backwards. The major alkene has more alkyl groups on C=C; H leaves the β-carbon with fewer H. Count E/Z isomers only when a question says "including stereoisomers".
5. Haloarenes. Chlorobenzene needs 623 K for hydrolysis; only o/p-nitro groups help much. A halogen deactivates the ring yet directs o/p. Grignard reagents need dry ether, and any O–H/N–H in the same molecule kills them.
Chloroform is stored in dark bottles completely filled, with a little ethanol added, because
Exercises
Atomic masses: H 1, C 12, N 14, O 16, Na 23, Cl 35.5, Br 80, I 127.
- 1 Write the product of bromoethane with aqueous KOH and with sodium methoxide; name both.
- 2 Write the product of bromoethane with KCN. What is its molar mass?
- 3 Bromoethane gives different products with KCN and with AgCN. Explain using the idea of an ambident nucleophile.
- 4 Give the products of 2-bromopropane with $\mathrm{AgNO_{2}}$ and with $\mathrm{KNO_{2}}$, and name them.
- 5 Draw the transition state for the SN2 reaction of iodide ion with chloromethane, showing partial bonds and partial charges.
- 6 For an SN2 reaction, rate $=4.0\times10^{-5}\ \mathrm{mol\,L^{-1}\,s^{-1}}$ when $[\mathrm{RX}]=0.020$ and $[\mathrm{OH^{-}}]=0.050\ \mathrm{mol\,L^{-1}}$. Find $k$ in $\mathrm{L\,mol^{-1}\,s^{-1}}$.
- 7 In the reaction of part 6, $[\mathrm{RX}]$ is halved and $[\mathrm{OH^{-}}]$ is made four times larger. By what factor does the rate change?
- 8 Bromoethane is heated with ammonia, the halide being in excess. How many different nitrogen-containing products (amines and the quaternary salt) can form?
- 1 For the SN1 hydrolysis of 2-chloro-2-methylpropane, by what factor does the rate change if $[\mathrm{RCl}]$ is doubled and the concentration of the nucleophile is tripled?
- 2 Label (1) $\mathrm{CH_{3}CH_{2}Br}$, (2) $\mathrm{(CH_{3})_{3}CBr}$, (3) $\mathrm{(CH_{3})_{2}CHBr}$, (4) $\mathrm{CH_{3}Br}$. Give the order of SN1 reactivity (fastest first) as a four-digit code.
- 3 Label (1) $\mathrm{(CH_{3})_{3}CCH_{2}Br}$, (2) $\mathrm{CH_{3}CH_{2}CH_{2}Br}$, (3) $\mathrm{CH_{3}Br}$, (4) $\mathrm{(CH_{3})_{2}CHBr}$. Give the order of SN2 reactivity (fastest first) as a code.
- 4 Which reacts faster with NaI in acetone, 1-chlorobutane or 1-bromobutane? Why?
- 5 Explain why SN2 reactions of anions are faster in acetone or DMSO than in water, while SN1 reactions are faster in water.
- 6 Optically active 2-bromobutane reacts with NaOH in acetone by SN2. Is the butan-2-ol optically active? Describe its configuration.
- 7 An SN1 hydrolysis of an optically pure tertiary halide gives an alcohol whose rotation is $30\,\%$ of that of the pure inverted alcohol. What percentage of the product is the inverted enantiomer?
- 8 Explain why 3-chloropropene undergoes SN1 hydrolysis much faster than 1-chloropropane.
- 9 How many stereoisomeric alcohols are formed in the SN1 hydrolysis of one enantiomer of 3-bromo-3-methylhexane?
- 1 Give the major and minor products of 2-bromobutane with alcoholic KOH and explain the choice.
- 2 How many structurally different alkenes can 2-bromo-3-methylbutane give on dehydrobromination?
- 3 How many alkenes, counting geometrical isomers separately, can 2-bromopentane give?
- 4 Which of 1-bromobutane, 2-bromo-2-methylpropane and 2-bromobutane gives a single alkene (no isomers of any kind)?
- 5 A mixture of 1-bromopropane and bromomethane is heated with sodium in dry ether. How many alkanes form? Name them.
- 6 What mass of sodium is needed to convert $10.9\ \mathrm{g}$ of bromoethane completely into butane by the Wurtz reaction?
- 7 How many moles of methane are evolved when $0.20\ \mathrm{mol}$ of ethane-1,2-diol reacts with excess $\mathrm{CH_{3}MgI}$?
- 8 Why must a Grignard reagent be prepared in dry ether, and what happens to $\mathrm{C_{2}H_{5}MgBr}$ in moist air?
- 1 Label (1) chlorobenzene, (2) 1-chloro-2,4-dinitrobenzene, (3) 1-chloro-4-nitrobenzene, (4) 1-chloro-3-nitrobenzene. Give the order of reactivity towards aqueous NaOH (fastest first) as a code.
- 2 Give the products of nitration of chlorobenzene and say which is major and why.
- 3 Explain why chlorine is deactivating yet ortho/para-directing in electrophilic substitution.
- 4 Chlorobenzene reacts with ethanoyl chloride and anhydrous $\mathrm{AlCl_{3}}$. Name the major product and find its molar mass.
- 5 What mass of phosgene could form if $23.9\ \mathrm{g}$ of chloroform were completely oxidised by air in light?
- 6 Calculate the percentage by mass of iodine in iodoform, and explain where its antiseptic action comes from.
- 7 Write the two chain steps by which chlorine atoms from freons destroy ozone, and explain why the effect is so large.
- 8 Find the molar mass of DDT, $\mathrm{C_{14}H_{9}Cl_{5}}$, and give two reasons for its persistence in food chains.
E1. JEE Main · MCQ Bromoethane is warmed with silver cyanide in ethanol. The major organic product is (A) $\mathrm{CH_{3}CH_{2}CN}$ (B) $\mathrm{CH_{3}CH_{2}NC}$ (C) $\mathrm{CH_{3}CH_{2}OH}$ (D) $\mathrm{CH_{3}CH_{2}CH_{2}NH_{2}}$
E2. JEE Main · Numerical One mole of $\mathrm{HC{\equiv}C{-}CH_{2}{-}CH(OH){-}CH_{2}{-}NH_{2}}$ is treated with excess methylmagnesium bromide. How many moles of methane are evolved? Give the answer to the nearest integer.
E3. JEE Main · MCQ Which compound reacts fastest with sodium iodide in dry acetone? (A) $\mathrm{CH_{3}CH_{2}CH_{2}Br}$ (B) $\mathrm{(CH_{3})_{2}CHBr}$ (C) $\mathrm{(CH_{3})_{3}CCH_{2}Br}$ (D) $\mathrm{CH_{3}CH_{2}CH_{2}Cl}$
E4. JEE Main · Numerical 3-Bromo-3-methylpentane is heated with alcoholic KOH. How many alkenes, counting geometrical isomers separately, can be formed? Give the answer to the nearest integer.
E5. JEE Main · MCQ Which statement is correct? (A) Freons are dangerous mainly because they are toxic and flammable at ground level. (B) DDT is water-soluble and is quickly excreted by animals. (C) The antiseptic action of iodoform is due to iodoform itself. (D) Chloroform is kept in dark bottles filled to the brim because air and light convert it into phosgene.
E6. JEE Main · Numerical An optically pure tertiary alkyl chloride undergoes SN1 hydrolysis. The alcohol obtained has an optical rotation one-fifth of that of the optically pure alcohol with inverted configuration (and of the same sign). What percentage of the substrate reacted with racemisation? Give the answer to the nearest integer.
Research question. How strongly does the polarity of the solvent control the rate of an SN1 reaction?
Why it matters. Pharmaceutical and fine-chemical plants choose solvents to speed up the step they want and slow down the side reactions; green-chemistry programmes now try to replace chlorinated solvents with water-rich mixtures. The hydrolysis of 2-chloro-2-methylpropane is the classic test case used to build solvent-polarity scales.
What to do.
- Prepare propanone–water mixtures with 50, 60 and 70 % propanone by volume, each containing a few drops of bromothymol blue and a fixed small amount of dilute NaOH (enough to neutralise about 10 % of the halide).
- Add a fixed amount of 2-chloro-2-methylpropane and time how long the colour takes to change from blue to yellow, as HCl formed by $\mathrm{(CH_{3})_{3}CCl+H_{2}O\rightarrow(CH_{3})_{3}COH+HCl}$ uses up the NaOH.
- Repeat each mixture twice. Since the same fraction reacts each time, $k\propto1/t$.
- Plot $\ln(1/t)$ against the percentage of water. Repeat one mixture with double the NaOH-free halide concentration and show that the time for the same fraction of reaction does not change (first order).
Tools: Burettes or graduated pipettes, a stopwatch, bromothymol blue, propanone, a fume cupboard, a spreadsheet.
Hand in: Your table of times, the plot, the factor by which $k$ changes per 10 % more water, and a paragraph linking it to the solvation of the carbocation and chloride ion.
Going further. Does adding sodium hydroxide at higher concentration change the rate? Does warming by 10 K change it more or less than adding 10 % water? What would you expect for 1-chlorobutane under the same conditions?
🧪 Self-check quiz
Q1. Which feature belongs to the SN2 mechanism?
Q2. For the hydrolysis of 2-bromo-2-methylpropane in water, the rate law is
Q3. 2-Bromo-2-methylbutane heated with alcoholic KOH gives mainly
Q4. Which reagent converts 1-bromopropane into 1-nitropropane?
Q5. Chlorine in chlorobenzene is ortho/para-directing in electrophilic substitution because