Chapter 15 · Hydrocarbons

15.1 Alkanes

The saturated hydrocarbons $\mathrm{C_{n}H_{2n+2}}$: how to name them and count their isomers, five ways to make them, why branching lowers the boiling point, how ethane twists between staggered and eclipsed shapes, and how a free-radical chain mechanism decides the ratio of halogenation products.

The gas in a kitchen cylinder, the CNG in a city bus, the petrol in a scooter, the wax of a candle and the bitumen on a road are all mixtures of alkanes — molecules made of nothing but carbon and hydrogen joined by single bonds. The old name paraffins (Latin parum affinis, "little affinity") records how unreactive they are: acids, alkalis and most oxidising agents leave them untouched at room temperature. Yet alkanes are the fuels of the modern world, because two reactions do work on them — burning in oxygen, and attack by halogen atoms in light. Both run through free radicals, and the second one is a favourite JEE Main source of product-ratio questions.

In this section we classify hydrocarbons, name alkanes and count their isomers, list the general methods of making them (each one changes the carbon skeleton in a predictable way), explain their physical properties from intermolecular forces, and look at the shapes ethane takes as it rotates about its C–C bond — the conformations drawn as sawhorse and Newman projections. The last part is the mechanism of free-radical halogenation, with the rule that turns "relative reactivity of 1°, 2° and 3° hydrogens" into percentages of products. Section 15.2 moves on to alkenes.

Hydrocarbons, alkanes and their IUPAC names

A compound that contains only carbon and hydrogen is a hydrocarbon. Because carbon forms four bonds and links to itself in chains and rings, there are millions of them, and we sort them first by the shape of the skeleton and then by the kinds of carbon–carbon bonds present.

📘 Definition 15.1 — Hydrocarbons and their classification

A hydrocarbon is a compound of carbon and hydrogen only. It is saturated if every carbon–carbon bond is a single bond, and unsaturated if it has at least one C=C or C≡C bond.

  • Acyclic (open-chain, aliphatic) hydrocarbons: alkanes $\mathrm{C_{n}H_{2n+2}}$ (all single bonds), alkenes $\mathrm{C_{n}H_{2n}}$ (one C=C), alkynes $\mathrm{C_{n}H_{2n-2}}$ (one C≡C).
  • Cyclic hydrocarbons: alicyclic ones, whose rings behave like open chains (cyclohexane $\mathrm{C_{6}H_{12}}$, a cycloalkane $\mathrm{C_{n}H_{2n}}$), and aromatic ones built on the benzene ring ($\mathrm{C_{6}H_{6}}$), which have a special stability (Section 15.4).
📘 Definition 15.2 — Alkanes; primary, secondary, tertiary and quaternary carbons

Alkanes are acyclic saturated hydrocarbons, general formula $\mathrm{C_{n}H_{2n+2}}$; consecutive members of the series differ by $\mathrm{CH_{2}}$ (14 g mol⁻¹). Every carbon is $sp^{3}$ hybridised and tetrahedral, with bond angles close to $109.5^{\circ}$ and C–C bonds about $154\ \mathrm{pm}$ long; the carbon chains are therefore zig-zag, not straight.

A carbon bonded to one, two, three or four other carbons is called primary (1°), secondary (2°), tertiary (3°) or quaternary (4°). Hydrogens take the name of the carbon that carries them: a $\mathrm{CH_{3}}$ group at a chain end has three 1° hydrogens, a $\mathrm{CH_{2}}$ inside a chain has two 2° hydrogens, a $\mathrm{CH}$ at a branch point has one 3° hydrogen; a quaternary carbon has none.

From butane onwards the same molecular formula fits more than one skeleton. $\mathrm{C_{4}H_{10}}$ can be a straight chain (butane) or a three-carbon chain with a methyl branch (2-methylpropane, "isobutane"). These are chain isomers, a kind of structural isomerism: the atoms are joined in a different order, so the compounds have different physical and chemical properties. The number of alkane isomers grows rapidly: $\mathrm{C_{4}}$ 2, $\mathrm{C_{5}}$ 3, $\mathrm{C_{6}}$ 5, $\mathrm{C_{7}}$ 9, $\mathrm{C_{8}}$ 18, $\mathrm{C_{9}}$ 35, $\mathrm{C_{10}}$ 75. To talk about them without ambiguity we need systematic names.

📐 Rule 15.1 — IUPAC names of alkanes
  1. Parent chain. Find the longest continuous chain of carbons (it need not be drawn in a straight line). Its length gives the root: meth-, eth-, prop-, but-, pent-, hex-, hept-, oct-, non-, dec- + -ane. If two chains are equally long, choose the one carrying more substituents.
  2. Numbering. Number the chain from the end that gives the substituents the lowest set of locants, compared term by term at the first point of difference (2,2,4 beats 2,4,4).
  3. Substituents. Name the alkyl branches (methyl, ethyl, propyl, isopropyl, tert-butyl …), give each its locant, and use di-, tri-, tetra- for repeats, with one locant per group (2,2-dimethyl, never 2-dimethyl).
  4. Order. Write the substituents in alphabetical order, ignoring the multiplying prefixes di-, tri- and the italic prefixes sec-, tert-, but counting iso- and neo-. If the two directions of numbering still tie, the group cited first alphabetically gets the lower number.
  5. Punctuation. Commas between numbers, hyphens between numbers and words, the whole name written as one word: 3-ethyl-2-methylhexane.
✏️ Example 1 — The five hexanes
Draw all the structural isomers of $\mathrm{C_{6}H_{14}}$, give their IUPAC names, and for each count the 1°, 2°, 3° and 4° carbons. How many of the isomers contain at least one tertiary carbon?
How many hexane isomers contain at least one 3° carbon?
Six in a row $\mathrm{CH_{3}CH_{2}CH_{2}CH_{2}CH_{2}CH_{3}}$, hexane: 2 primary, 4 secondary carbons.
Five + one A methyl on a pentane chain can sit on C2 or C3 (C1 would just lengthen the chain; C4 is C2 counted from the other end). $\mathrm{(CH_{3})_{2}CH{-}CH_{2}CH_{2}CH_{3}}$ is 2-methylpentane (3 × 1°, 2 × 2°, 1 × 3°); $\mathrm{CH_{3}CH_{2}{-}CH(CH_{3}){-}CH_{2}CH_{3}}$ is 3-methylpentane (3 × 1°, 2 × 2°, 1 × 3°). An ethyl branch on C3 of a pentane chain would make a six-carbon chain, so it is not a new isomer.
Four + two Two methyls on a butane chain: both on C2 gives $\mathrm{(CH_{3})_{3}C{-}CH_{2}CH_{3}}$, 2,2-dimethylbutane (4 × 1°, 1 × 2°, 1 × 4°); one each on C2 and C3 gives $\mathrm{(CH_{3})_{2}CH{-}CH(CH_{3})_{2}}$, 2,3-dimethylbutane (4 × 1°, 2 × 3°).
Count Five isomers in all; a tertiary carbon appears in 2-methylpentane, 3-methylpentane and 2,3-dimethylbutane — three isomers.
Check In every isomer the counts satisfy $n_{1°}+n_{2°}+n_{3°}+n_{4°}=6$ and the hydrogens add up to 14: e.g. 2,2-dimethylbutane has $4\times3+1\times2+0+0=14$ ✓. Branching leaves the formula unchanged but alters the mix of carbon types — which is what controls halogenation ratios later in this section.

The IUPAC name of $\mathrm{(CH_{3})_{2}CH{-}CH_{2}{-}C(CH_{3})_{3}}$ ("isooctane", the 100-point standard of petrol octane ratings) is

Preparation and physical properties of alkanes

Alkanes are obtained on a large scale from natural gas and petroleum. In the laboratory, and in exam questions, they are made from compounds that already have the right carbon skeleton or one that can be built up or cut down. The key question for each method is: what happens to the number of carbon atoms?

📐 Result 15.2 — General methods of preparing alkanes

(a) Hydrogenation of alkenes and alkynes (same carbon skeleton). Hydrogen adds across the multiple bond on the surface of a finely divided metal: platinum or palladium at room temperature, or nickel at about 523–573 K.

$$\mathrm{CH_{3}CH{=}CH_{2} + H_{2} \xrightarrow{\text{Pt / Pd / Ni}} CH_{3}CH_{2}CH_{3}}$$ $$\mathrm{HC{\equiv}CH + 2\,H_{2} \xrightarrow{\text{Pt / Pd / Ni}} CH_{3}CH_{3}}$$

(b) Reduction of haloalkanes (same skeleton). Zinc and dilute hydrochloric acid replace the halogen by hydrogen: $\mathrm{CH_{3}CH_{2}CH_{2}Cl + H_{2} \xrightarrow{\mathrm{Zn,\ H^{+}}} CH_{3}CH_{2}CH_{3} + HCl}$.

(c) Wurtz reaction (carbon number doubles). Sodium metal in dry ether joins two alkyl groups of a haloalkane:

$$\mathrm{2\,R{-}X + 2\,Na \xrightarrow{\text{dry ether}} R{-}R + 2\,NaX}$$

It gives symmetrical alkanes with an even number of carbons, works best with primary halides, and cannot make methane. A mixture of two different halides gives all three possible products $\mathrm{R{-}R}$, $\mathrm{R'{-}R'}$ and $\mathrm{R{-}R'}$.

(d) Decarboxylation (one carbon fewer). The sodium salt of a carboxylic acid heated with soda lime (NaOH + CaO) loses $\mathrm{CO_{2}}$ as sodium carbonate:

$$\mathrm{R{-}COONa + NaOH \xrightarrow[\Delta]{\text{CaO}} R{-}H + Na_{2}CO_{3}}$$

(e) Kolbe electrolysis (two alkyl groups joined). An aqueous solution of the sodium or potassium salt is electrolysed. At the anode the carboxylate ion is oxidised to a radical that loses $\mathrm{CO_{2}}$, and two alkyl radicals pair up; at the cathode water is reduced:

$$\mathrm{anode:\ \ 2\,RCOO^{-} \rightarrow 2\,RCOO^{\bullet} + 2\,e^{-};\quad 2\,RCOO^{\bullet} \rightarrow 2\,R^{\bullet} + 2\,CO_{2};\quad 2\,R^{\bullet} \rightarrow R{-}R}$$ $$\mathrm{cathode:\ \ 2\,H_{2}O + 2\,e^{-} \rightarrow H_{2} + 2\,OH^{-}}$$ $$\mathrm{overall:\ \ 2\,RCOONa + 2\,H_{2}O \rightarrow R{-}R + 2\,CO_{2} + H_{2} + 2\,NaOH}$$

An acid with $m+1$ carbons gives an alkane with $2m$ carbons; methane cannot be made this way either.

The two "doubling" reactions are easy to confuse with the "cutting" one. Decarboxylation simply snips off the carboxyl carbon: sodium ethanoate gives methane, sodium propanoate gives ethane. Kolbe electrolysis snips off the carboxyl carbon and joins the two remaining fragments: sodium ethanoate gives ethane, sodium propanoate gives butane. Wurtz joins two alkyl groups taken from halides.

✏️ Example 2 — Planning a Wurtz synthesis
(a) A student heats a mixture of bromomethane and bromoethane with sodium in dry ether. Name every alkane formed and say why the method is a poor way to make propane. (b) Which haloalkane should be used to make 2,2,5,5-tetramethylhexane by the Wurtz reaction? (c) Can 2-methylbutane be made by a Wurtz reaction from a single haloalkane?
(a) The alkyl groups pair in every possible way: $\mathrm{CH_{3}{-}CH_{3}}$ (ethane), $\mathrm{CH_{3}{-}CH_{2}CH_{3}}$ (propane) and $\mathrm{CH_{3}CH_{2}{-}CH_{2}CH_{3}}$ (butane). Propane is only one of three products, and the gases (boiling points about 185 K, 231 K and 273 K) then have to be separated — so the yield of the wanted alkane is low.
(b) Cut the target in the middle of its symmetry: $\mathrm{(CH_{3})_{3}C{-}CH_{2}\,|\,CH_{2}{-}C(CH_{3})_{3}}$. Each half is a 2,2-dimethylpropyl group, so use 1-bromo-2,2-dimethylpropane: $\mathrm{2\,(CH_{3})_{3}CCH_{2}Br + 2\,Na \rightarrow (CH_{3})_{3}CCH_{2}CH_{2}C(CH_{3})_{3} + 2\,NaBr}$.
(c) No. A single halide gives a symmetrical alkane $\mathrm{R{-}R}$ with an even number of carbons; 2-methylbutane, $\mathrm{C_{5}H_{12}}$, is neither. It would need a mixed Wurtz (e.g. 2-bromopropane + bromoethane), which again gives three products.
Check Carbon count: $2\times5=10$ carbons in (b), and 2,2,5,5-tetramethylhexane is $\mathrm{C_{10}H_{22}}$ ✓.
✏️ Example 3 — Sodium propanoate: soda lime versus electrolysis
$19.2\ \mathrm{g}$ of sodium propanoate, $\mathrm{CH_{3}CH_{2}COONa}$, is (a) heated with soda lime, or (b) dissolved in water and electrolysed until it is used up. For each, name the organic product and find its amount. In (b), how many moles of gas are given off at the anode, and what forms at the cathode? (C = 12, H = 1, O = 16, Na = 23.)
Find the total moles of gas collected at the anode in (b):
Moles $M(\mathrm{C_{2}H_{5}COONa})=3(12)+5(1)+2(16)+23=96\ \mathrm{g\,mol^{-1}}$, so $n=19.2/96=0.200\ \mathrm{mol}$.
(a) $\mathrm{C_{2}H_{5}COONa + NaOH \rightarrow C_{2}H_{6} + Na_{2}CO_{3}}$: ethane, $0.200\ \mathrm{mol}$ ($6.0\ \mathrm{g}$) — one carbon fewer than the acid.
(b) $\mathrm{2\,C_{2}H_{5}COONa + 2\,H_{2}O \rightarrow C_{4}H_{10} + 2\,CO_{2} + H_{2} + 2\,NaOH}$: butane, $0.100\ \mathrm{mol}$. At the anode $0.100\ \mathrm{mol}$ butane $+\ 0.200\ \mathrm{mol}$ $\mathrm{CO_{2}}$ $=0.300\ \mathrm{mol}$ of gas. At the cathode $0.100\ \mathrm{mol}$ $\mathrm{H_{2}}$, and the solution near it becomes alkaline ($0.200\ \mathrm{mol}$ NaOH).
Check Atoms in the overall equation: C $6=4+2$, H $10+4=10+2+2$, O $4+2=4+2$, Na $2=2$ ✓. (In practice some of the $\mathrm{CO_{2}}$ dissolves in the alkaline solution; the stoichiometry is what JEE asks.)

Alkanes are non-polar: the C–C bond is perfectly non-polar and the C–H bond only very slightly polar, and in any case the tetrahedral geometry cancels the small bond dipoles. The only forces between their molecules are weak London dispersion forces, which grow with the number of electrons and with the area over which two molecules can touch.

📐 Result 15.3 — Physical properties of alkanes
  • State. $\mathrm{C_{1}}$–$\mathrm{C_{4}}$ are gases, $\mathrm{C_{5}}$–$\mathrm{C_{17}}$ liquids and higher members waxy solids at 298 K.
  • Boiling point rises with chain length (more electrons, larger contact area): methane 112 K, ethane 185 K, propane 231 K, butane 273 K, pentane 309 K, hexane 342 K.
  • Branching lowers the boiling point among isomers: a branched molecule is more compact (closer to a sphere), so it touches its neighbours over a smaller area. Pentane 309 K, 2-methylbutane 301 K, 2,2-dimethylpropane 283 K.
  • Melting point depends also on how well the molecules pack in the crystal. Highly symmetrical molecules pack well, so 2,2-dimethylpropane melts at 257 K, far above pentane (143 K) and 2-methylbutane (113 K).
  • Solubility and density. "Like dissolves like": alkanes are insoluble in water but mix with non-polar solvents (benzene, tetrachloromethane, ether). They are less dense than water, so they float on it.

Which alkane cannot be prepared by the Wurtz reaction?

Conformations of ethane

A σ bond is cylindrically symmetrical about the line joining the two nuclei, so one end of the molecule can rotate about a C–C single bond without breaking the bond. In ethane, as one $\mathrm{CH_{3}}$ group turns relative to the other, the six hydrogens take up an infinite number of different arrangements in space. These are not different compounds — they turn into each other millions of times a second — but they do differ slightly in energy.

📘 Definition 15.3 — Conformations; sawhorse and Newman projections

The different spatial arrangements of a molecule that arise by rotation about single bonds are its conformations (conformers, rotamers). For ethane they are described by the dihedral angle $\varphi$: looking along the C–C bond, the angle between a C–H bond on the front carbon and a C–H bond on the rear carbon.

  • Eclipsed ($\varphi=0^{\circ},120^{\circ},240^{\circ}$): each rear C–H bond lies directly behind a front C–H bond.
  • Staggered ($\varphi=60^{\circ},180^{\circ},300^{\circ}$): each rear C–H bond sits midway between two front ones.
  • Skew (gauche-type): any angle in between.

Sawhorse projection: the C–C bond is drawn as a long diagonal line seen obliquely, the front carbon at the lower left and the rear carbon at the upper right, each with its three bonds. Newman projection: the molecule is viewed straight down the C–C bond; the front carbon is a point where three bonds meet, the rear carbon a circle from whose edge its three bonds emerge.

(In the eclipsed Newman drawing the rear bonds are turned by a few degrees only so that they can be seen; in the real eclipsed conformation they are exactly hidden.) Why should the eclipsed form be higher in energy? In it, each pair of bonding electron clouds — a front C–H bond and the rear C–H bond behind it — are as close as they can get, and they repel. In the staggered form the bond pairs are as far apart as possible. A second, smaller contribution is that in the staggered form each filled C–H σ orbital lines up with an empty C–H σ* orbital on the neighbouring carbon, a stabilising interaction of the hyperconjugation type. The extra energy of a conformation caused by eclipsing of bonds is called torsional strain.

📐 Result 15.4 — Torsional strain in ethane
  • The staggered conformation has the lowest energy and the eclipsed conformation the highest; the difference, the rotational barrier, is about $12.5\ \mathrm{kJ\,mol^{-1}}$ — roughly $4.2\ \mathrm{kJ\,mol^{-1}}$ for each of the three eclipsed H/H pairs.
  • The energy varies smoothly with the dihedral angle, rising and falling three times per full turn; a good approximation is $$E(\varphi)=\tfrac12E_{0}\,(1+\cos3\varphi),\qquad E_{0}=12.5\ \mathrm{kJ\,mol^{-1}},$$ with $\varphi=0^{\circ}$ eclipsed.
  • Bond lengths and bond angles are (to a very good approximation) the same in every conformation; only the dihedral angle changes.
  • The barrier is small compared with the thermal energy available at room temperature ($RT\approx2.5\ \mathrm{kJ\,mol^{-1}}$ at 298 K, with a spread of molecular energies well above that), so rotation is practically free: the conformations interconvert so fast that they cannot be isolated. At any instant most molecules are near a staggered arrangement.
✏️ Example 4 — Reading the torsional energy curve
Using $E(\varphi)=6.25\,(1+\cos3\varphi)\ \mathrm{kJ\,mol^{-1}}$ for ethane: (a) list the dihedral angles between $0^{\circ}$ and $360^{\circ}$ at which the energy is greatest and least; (b) find $E$ at $\varphi=30^{\circ}$ and at $\varphi=40^{\circ}$; (c) the relative number of molecules in two arrangements differing in energy by $\Delta E$ is about $e^{-\Delta E/RT}$. Estimate how many times more molecules are near the staggered than near the eclipsed arrangement at 298 K ($R=8.314\ \mathrm{J\,mol^{-1}\,K^{-1}}$).
(a) $\cos3\varphi=1$ (maximum, eclipsed) at $\varphi=0^{\circ},120^{\circ},240^{\circ}$ (and $360^{\circ}$, the same as $0^{\circ}$); $\cos3\varphi=-1$ (minimum, staggered) at $60^{\circ},180^{\circ},300^{\circ}$. Three of each per turn — the threefold symmetry of a $\mathrm{CH_{3}}$ group.
(b) $\varphi=30^{\circ}$: $\cos90^{\circ}=0$, $E=6.25\ \mathrm{kJ\,mol^{-1}}$ — exactly half the barrier, halfway between the extremes. $\varphi=40^{\circ}$: $\cos120^{\circ}=-\tfrac12$, $E=6.25\times0.5=3.13\ \mathrm{kJ\,mol^{-1}}$.
(c) $\dfrac{N_{\text{stag}}}{N_{\text{ecl}}}=e^{\Delta E/RT}=\exp\!\left(\dfrac{12\,500}{8.314\times298}\right)=e^{5.05}\approx155$.
Meaning Only about 1 molecule in 150 is near an eclipsed arrangement at any instant, yet all of them pass through it: the barrier is only about $5RT$, so each molecule turns over it extremely often. That is why the "isomers" cannot be separated.

Start from the eclipsed conformation ($\varphi=0^{\circ}$, energy $12.5\ \mathrm{kJ\,mol^{-1}}$) and turn the rear carbon by $20^{\circ}$ — one third of the way to staggered. How much of the torsional strain is left?

Set the slider to $\varphi=20^{\circ}$: the energy readout shows 9.38 kJ/mol (75% of barrier), because $6.25(1+\cos60^{\circ})=9.375$. The energy curve is flat at its top, so a small twist away from eclipsed relieves only a little strain; the steepest change is around $\varphi=30^{\circ}$, where the readout is $6.25\ \mathrm{kJ\,mol^{-1}}$ (50%). The energy is not linear in the angle.
Interactive 1 — Ethane Rotor: Newman Projection and Energy Curve

The Newman projection on the left looks down the C–C bond of ethane: black bonds belong to the front carbon, blue ones to the rear carbon. Drag the slider (or press Play) to turn the rear carbon. The red H on each carbon marks the pair whose dihedral angle $\varphi$ is measured. On the right the dot runs along the torsional energy curve $E=6.25(1+\cos3\varphi)\ \mathrm{kJ\,mol^{-1}}$.

0°
dihedral angle—
torsional energy—
conformation—
relative population $e^{-E/RT}$, 298 K—

In the Newman projection of staggered ethane, the dihedral angle between a front C–H bond and the nearest rear C–H bond is

Free-radical halogenation, combustion and cracking

Because their C–C and C–H bonds are strong and almost non-polar, alkanes do not attract electrophiles or nucleophiles. They do react with species that have an unpaired electron. In diffused sunlight or ultraviolet light, or at about 520–670 K in the dark, chlorine replaces the hydrogens of methane one after another: $\mathrm{CH_{3}Cl}$, $\mathrm{CH_{2}Cl_{2}}$, $\mathrm{CHCl_{3}}$ and finally $\mathrm{CCl_{4}}$. The reaction is a chain reaction: a single photon can lead to thousands of molecules of product.

📐 Principle 15.5 — Mechanism of free-radical halogenation

Initiation. Light (or heat) breaks the weakest bond present, the Cl–Cl bond (about $242\ \mathrm{kJ\,mol^{-1}}$), homolytically — each atom keeps one electron of the bonding pair: $\mathrm{Cl{-}Cl \xrightarrow{h\nu} 2\,Cl^{\bullet}}$.

Propagation (two steps that repeat in a cycle, each consuming one radical and producing another):

$$\mathrm{(i)\ \ Cl^{\bullet} + H{-}CH_{3} \rightarrow H{-}Cl + {}^{\bullet}CH_{3}}$$ $$\mathrm{(ii)\ \ {}^{\bullet}CH_{3} + Cl{-}Cl \rightarrow CH_{3}{-}Cl + Cl^{\bullet}}$$

Termination. Two radicals meet and pair their electrons, removing radicals from the chain: $\mathrm{Cl^{\bullet}+{}^{\bullet}Cl \rightarrow Cl_{2}}$, $\mathrm{{}^{\bullet}CH_{3}+{}^{\bullet}CH_{3} \rightarrow CH_{3}{-}CH_{3}}$, $\mathrm{{}^{\bullet}CH_{3}+{}^{\bullet}Cl \rightarrow CH_{3}Cl}$.

The small amount of ethane found among the products is evidence for the methyl radical. A radical inhibitor (e.g. a trace of $\mathrm{O_{2}}$) slows the reaction, and the chlorinated products can be attacked again, so a large excess of the alkane is used when the monohalo compound is wanted.

A single-barbed ("fish-hook") arrow shows the movement of one electron; a full arrowhead (used for polar mechanisms in Section 15.2) shows an electron pair. Every propagation step above has one fish-hook from each of the two electrons that form the new bond, and one to the atom that keeps the leftover electron.

Reactivity of the halogens. The order is $\mathrm{F_{2}\gt Cl_{2}\gt Br_{2}\gt I_{2}}$. Fluorination is explosive and breaks C–C bonds too, so it is not used directly. Iodination is reversible, because the HI formed reduces the iodoalkane back to the alkane; it succeeds only if an oxidising agent such as iodic acid or nitric acid destroys the HI ($\mathrm{5\,HI + HIO_{3} \rightarrow 3\,I_{2} + 3\,H_{2}O}$). Chlorination and bromination are the useful ones — and they behave very differently towards different kinds of hydrogen.

Which hydrogen is removed? In an alkane such as propane there are two kinds of hydrogen, and step (i) decides which product forms: removing a 1° hydrogen gives the 1° radical $\mathrm{CH_{3}CH_{2}CH_{2}^{\bullet}}$ (and 1-chloropropane), removing a 2° hydrogen gives the 2° radical $\mathrm{CH_{3}\dot{C}HCH_{3}}$ (and 2-chloropropane). Alkyl radicals are stabilised by hyperconjugation, so their stability is $3^{\circ}\gt2^{\circ}\gt1^{\circ}\gt\mathrm{CH_{3}^{\bullet}}$, and a C–H bond is easier to break the more stable the radical it leaves behind. Each 3° hydrogen is therefore removed faster than each 2° one, and each 2° faster than each 1°.

📐 Rule 15.6 — Product ratio in free-radical halogenation

For monohalogenation of an alkane, the amount of each product is proportional to

$$(\text{number of equivalent H atoms that give it})\times(\text{relative reactivity per H}),$$

so the percentage of product $i$ is $\ \%_{i}=\dfrac{n_{i}\,r_{i}}{\sum_{j}n_{j}\,r_{j}}\times100$.

Typical relative reactivities per hydrogen, $1^{\circ}:2^{\circ}:3^{\circ}$: chlorination at 298 K: $1:3.8:5$; bromination (about 400 K): $1:82:1600$. These values hold for monohalogenation with the alkane in excess, so that polyhalogenation can be ignored.

Why is bromine so much more selective? Compare step (i) for the two halogens. With chlorine it is roughly thermoneutral (C–H about $435\ \mathrm{kJ\,mol^{-1}}$ broken, H–Cl $431\ \mathrm{kJ\,mol^{-1}}$ formed), so the transition state comes early and looks like the reactants: the radical is hardly formed yet, and its stability matters little. With bromine the step is clearly endothermic (H–Br is only $366\ \mathrm{kJ\,mol^{-1}}$), so the transition state comes late and resembles the alkyl radical; differences in radical stability then show up almost fully in the activation energies. The more reactive reagent is the less selective one — the reactivity–selectivity principle.

🧭 Problem-solving strategy — Monohalogenation products and their ratio
  1. Draw the skeleton and sort the carbons that carry hydrogen into sets of equivalent carbons (related by the symmetry of the molecule). Each set gives one structural product: number of monohalo structural isomers = number of sets. A quaternary carbon gives nothing.
  2. For each set, count its hydrogens $n_{i}$ and note whether they are 1°, 2° or 3°.
  3. Multiply by the relative reactivity, add, and convert to percentages (Rule 15.6).
  4. If the question asks for "all isomers including stereoisomers", check every product for a chiral carbon (four different groups) — each such product counts twice (a pair of enantiomers).
  5. Name each product by IUPAC rules — the chain may need renumbering once the halogen is in.
✏️ Example 5 — Chlorinating 2-methylbutane
2-Methylbutane, $\mathrm{(CH_{3})_{2}CH{-}CH_{2}{-}CH_{3}}$, is chlorinated in light at 298 K with the alkane in excess. (a) How many structurally different monochloro products form, and what are their names? (b) Using $1^{\circ}:2^{\circ}:3^{\circ}=1:3.8:5$, find the percentage of each. (c) How many monochloro products are there if stereoisomers are counted separately?
Find the percentage of 2-chloro-3-methylbutane before you open the solution:
Sets of H C1 and the methyl on C2 are equivalent: 6 primary H. C2: 1 tertiary H. C3: 2 secondary H. C4: 3 primary H. Four sets, so four structural products.
Names $\mathrm{ClCH_{2}CH(CH_{3})CH_{2}CH_{3}}$, 1-chloro-2-methylbutane; $\mathrm{(CH_{3})_{2}CClCH_{2}CH_{3}}$, 2-chloro-2-methylbutane; $\mathrm{(CH_{3})_{2}CHCHClCH_{3}}$, 2-chloro-3-methylbutane; $\mathrm{(CH_{3})_{2}CHCH_{2}CH_{2}Cl}$, 1-chloro-3-methylbutane.
(b) Weights $n\times r$: $6\times1=6$; $\ 1\times5=5$; $\ 2\times3.8=7.6$; $\ 3\times1=3$; sum $21.6$. Percentages: $27.8\%$, $23.1\%$, $35.2\%$, $13.9\%$. The major product comes from the 2° hydrogens — neither the most numerous (1°) nor the most reactive (3°) set wins on its own.
(c) 1-Chloro-2-methylbutane has a chiral C2 (H, $\mathrm{CH_{3}}$, $\mathrm{C_{2}H_{5}}$, $\mathrm{CH_{2}Cl}$) and 2-chloro-3-methylbutane a chiral C2 (H, $\mathrm{CH_{3}}$, Cl, $\mathrm{CH(CH_{3})_{2}}$); each exists as two enantiomers. Total $2+1+2+1=6$.
Check $27.8+23.1+35.2+13.9=100.0$ ✓. Interactive 2 below reproduces these numbers.
✏️ Example 6 — Chlorine or bromine?
(a) Monochlorination of propane at 298 K gives 1-chloropropane and 2-chloropropane in the ratio $45:55$. Find the reactivity of a secondary hydrogen relative to a primary one. (b) Taking the bromination reactivities $1:82:1600$, find the percentage of 2-bromopropane from propane and of 2-bromo-2-methylpropane from 2-methylpropane. (c) A chemist wants to convert 2-methylpropane into a single tert-butyl halide. Which halogen should she use, and why?
(a) Propane has 6 primary and 2 secondary H. Reactivity per H is (amount of product) ÷ (number of H): $\dfrac{r_{2^{\circ}}}{r_{1^{\circ}}}=\dfrac{55/2}{45/6}=\dfrac{27.5}{7.5}=3.7$.
(b) propane $\dfrac{2\times82}{2\times82+6\times1}=\dfrac{164}{170}=96.5\%$ 2-bromopropane.
(b) isobutane 9 primary H and 1 tertiary H: $\dfrac{1\times1600}{1600+9}=\dfrac{1600}{1609}=99.4\%$ 2-bromo-2-methylpropane. (Chlorination gives only $\dfrac{5}{5+9}=35.7\%$ of the tertiary chloride.)
(c) Bromine: its H-abstraction step is endothermic, the transition state is late and radical-like, and the large stability gap between the 3° and 1° radicals translates into a 1600-fold rate difference per H. Chlorine's early transition state "sees" little of that difference.
⏱ Shortcut For a ratio question with two kinds of H, write $\dfrac{\text{product A}}{\text{product B}}=\dfrac{n_{A}r_{A}}{n_{B}r_{B}}$ and solve for whichever quantity is missing.

2-Methylpropane has nine 1° hydrogens and one 3° hydrogen. With chlorine at 298 K ($1:3.8:5$), which monochloro product is the major one?

Choose 2-methylpropane with $\mathrm{Cl_{2}}$: the bars read 1-chloro-2-methylpropane 64.3% and 2-chloro-2-methylpropane 35.7% ($9\times1:1\times5=9:5$). The single 3° hydrogen is five times more reactive, but it is outnumbered nine to one. Now switch to $\mathrm{Br_{2}}$: the tertiary bromide jumps to 99.4% — bromination is selective. A rearranged skeleton (2-chlorobutane) never forms: radicals keep their carbon skeleton.
Interactive 2 — Halogenation Product Ratios

Choose an alkane and a halogen. On the left, carbons of the same colour carry equivalent hydrogens (grey: no H). On the right, each bar is one monohalo product, with its weight (number of H) × (relative reactivity per H) and its percentage. Press Play to step through the sets of hydrogens one at a time.

structural monohalo products—
major product—
major product share—
highlighted set—

Alkanes take part in a few other reactions that JEE Main expects you to recognise.

📐 Result 15.7 — Combustion, controlled oxidation, isomerisation, aromatisation and cracking
  • Complete combustion gives carbon dioxide and water and releases a large amount of heat: $$\mathrm{C_{n}H_{2n+2} + \tfrac{3n+1}{2}\,O_{2} \rightarrow n\,CO_{2} + (n+1)\,H_{2}O},$$ e.g. $\mathrm{CH_{4}(g) + 2\,O_{2}(g) \rightarrow CO_{2}(g) + 2\,H_{2}O(l)}$, $\Delta_{c}H^{\circ}=-890\ \mathrm{kJ\,mol^{-1}}$. In too little air, carbon monoxide and soot (carbon black) form.
  • Controlled oxidation with catalysts: $\mathrm{2\,CH_{4}+O_{2}\xrightarrow{\text{Cu, 523 K, 100 atm}}2\,CH_{3}OH}$; $\mathrm{CH_{4}+O_{2}\xrightarrow{\mathrm{Mo_{2}O_{3}},\ \Delta}HCHO+H_{2}O}$; $\mathrm{2\,CH_{3}CH_{3}+3\,O_{2}\xrightarrow{\mathrm{(CH_{3}COO)_{2}Mn},\ \Delta}2\,CH_{3}COOH+2\,H_{2}O}$. A tertiary C–H is oxidised by $\mathrm{KMnO_{4}}$ to an alcohol: $\mathrm{(CH_{3})_{3}CH \rightarrow (CH_{3})_{3}COH}$.
  • Isomerisation: n-alkanes heated with anhydrous $\mathrm{AlCl_{3}}$ and HCl give branched isomers (hexane → 2-methylpentane + 3-methylpentane) — branched alkanes burn more smoothly in engines.
  • Aromatisation: alkanes with six or more carbons, over $\mathrm{Cr_{2}O_{3}}$, $\mathrm{V_{2}O_{5}}$ or $\mathrm{Mo_{2}O_{3}}$ on alumina at about 773 K and 10–20 atm, cyclise and lose hydrogen: $\mathrm{C_{6}H_{14}\rightarrow C_{6}H_{6}+4\,H_{2}}$.
  • Reaction with steam: $\mathrm{CH_{4}+H_{2}O\xrightarrow{\text{Ni, 1273 K}}CO+3\,H_{2}}$ (an industrial source of hydrogen).
  • Pyrolysis (cracking): heated to about 773 K in the absence of air, higher alkanes break into smaller alkanes, alkenes and hydrogen by a free-radical process, e.g. $\mathrm{C_{6}H_{14}\rightarrow C_{4}H_{8}+C_{2}H_{6}}$ or $\mathrm{C_{3}H_{6}+C_{2}H_{4}+CH_{4}}$. This is how heavy oil fractions are turned into petrol and how ethene and propene are made.
⚠️ JEE Main traps

1. Counting products from atoms instead of sets. 2,3-Dimethylbutane has 14 hydrogens but only two sets of equivalent H, so only two monochloro products. Look for the molecule's symmetry before counting; and read whether stereoisomers are to be included.

2. Using only the number of H, or only the reactivity. The ratio is $n\times r$. 2-Methylpropane gives mostly the primary chloride (9 × 1 beats 1 × 5) but almost only the tertiary bromide (1 × 1600 beats 9 × 1).

3. Carbon arithmetic of the preparations. Decarboxylation removes one carbon; Kolbe electrolysis of $\mathrm{RCOONa}$ gives $\mathrm{R{-}R}$ (sodium ethanoate → ethane, not methane); Wurtz with two different halides gives three alkanes; neither Wurtz nor Kolbe can make methane.

4. Branching and melting point. Branching lowers the boiling point, but a compact, symmetrical isomer may have the highest melting point (2,2-dimethylpropane).

5. Conformations are not isolable isomers. Staggered and eclipsed ethane differ only by rotation; the barrier ($\approx12.5\ \mathrm{kJ\,mol^{-1}}$) is far too low to keep them apart at room temperature, and bond lengths and angles do not change between them.

Free-radical bromination is far more selective than chlorination because

Exercises

Use the relative reactivities of Rule 15.6 where needed, and C = 12, H = 1, O = 16, Na = 23, Cl = 35.5, Br = 80 (g mol⁻¹).

I
Classification, isomerism and IUPAC names.
  • 1 Which of $\mathrm{C_{7}H_{16}}$, $\mathrm{C_{5}H_{10}}$, $\mathrm{C_{6}H_{14}}$, $\mathrm{C_{8}H_{16}}$, $\mathrm{C_{9}H_{20}}$ can be alkanes? How many is that? Say what the others could be.
  • 2 How many structural isomers does heptane, $\mathrm{C_{7}H_{16}}$, have? Name the ones with a five-carbon parent chain.
  • 3 Give IUPAC names: (a) $\mathrm{(CH_{3})_{2}CHCH_{2}CH(CH_{3})_{2}}$; (b) $\mathrm{CH_{3}CH_{2}C(CH_{3})_{2}CH_{2}CH_{3}}$; (c) $\mathrm{(CH_{3})_{3}C{-}CH(CH_{3}){-}CH_{2}CH_{3}}$.
  • 4 Each name is wrong. Draw the structure it describes and give the correct name: (a) 2-ethylbutane; (b) 3-methylbutane; (c) 2,3,3-trimethylbutane; (d) 1,1-dimethylpropane.
  • 5 In 2,2,4-trimethylpentane, how many carbons are 1°, 2°, 3° and 4°? How many primary hydrogens does it have?
  • 6 Name the isomer of $\mathrm{C_{5}H_{12}}$ that has (a) only 1° and 2° carbons; (b) one quaternary carbon; (c) exactly one tertiary carbon.
  • 7 An alkane has molar mass $86\ \mathrm{g\,mol^{-1}}$. Find the number of carbon atoms, and name its isomer that has two tertiary carbons.
  • 8 Which $\mathrm{C_{6}H_{14}}$ isomer gives the smallest number of structurally different monochloro derivatives? How many?
1 $\mathrm{C_{n}H_{2n+2}}$ fits $\mathrm{C_{7}H_{16}}$, $\mathrm{C_{6}H_{14}}$ and $\mathrm{C_{9}H_{20}}$: 3. $\mathrm{C_{5}H_{10}}$ and $\mathrm{C_{8}H_{16}}$ are $\mathrm{C_{n}H_{2n}}$: an alkene or a cycloalkane.
2 9. Five-carbon parent chains: 2,2-dimethylpentane, 2,3-dimethylpentane, 2,4-dimethylpentane, 3,3-dimethylpentane and 3-ethylpentane. (The others: heptane, 2-methylhexane, 3-methylhexane, 2,2,3-trimethylbutane.)
3 (a) 2,4-dimethylpentane; (b) 3,3-dimethylpentane; (c) 2,2,3-trimethylpentane (locants {2,2,3}, not {3,4,4}).
4 (a) $\mathrm{CH_{3}CH(C_{2}H_{5})CH_{2}CH_{3}}$: longest chain 5 → 3-methylpentane. (b) Number from the other end: 2-methylbutane. (c) Lowest locants {2,2,3}: 2,2,3-trimethylbutane. (d) $\mathrm{(CH_{3})_{2}CHCH_{2}CH_{3}}$: the longest chain has 4 C → 2-methylbutane.
5 $\mathrm{(CH_{3})_{3}C{-}CH_{2}{-}CH(CH_{3})_{2}}$: five $\mathrm{CH_{3}}$ (1°), one $\mathrm{CH_{2}}$ (2°), one CH (3°), one C (4°). Primary H $=5\times3=$ 15.
6 (a) pentane; (b) 2,2-dimethylpropane; (c) 2-methylbutane.
7 $14n+2=86$, $n=$ 6 ($\mathrm{C_{6}H_{14}}$). Two 3° carbons: 2,3-dimethylbutane.
8 2,3-Dimethylbutane: its four methyls are equivalent and so are its two CH groups — only 2 monochloro derivatives (the other isomers give 3, 4, 5 and 3).
II
Preparation and physical properties.
  • 1 Write the equation for the reaction of bromoethane with sodium in dry ether and name the product. Why must the ether be dry?
  • 2 A mixture of iodomethane and 1-iodopropane is treated with sodium in dry ether. How many different alkanes can form? Name them.
  • 3 Which haloalkane gives 2,3-dimethylbutane as the only alkane in a Wurtz reaction?
  • 4 $11.0\ \mathrm{g}$ of sodium butanoate is heated with soda lime. Name the alkane and find its mass, assuming complete reaction.
  • 5 Potassium 2-methylpropanoate, $\mathrm{(CH_{3})_{2}CHCOOK}$, is electrolysed in aqueous solution. Name the alkane formed, and find the total number of moles of gas (at both electrodes together) produced per 2 mol of salt.
  • 6 Arrange in increasing order of boiling point, with a reason: hexane, 2,2-dimethylbutane, pentane, 2-methylpentane.
  • 7 2,2-Dimethylpropane boils lower than pentane but melts more than 100 K higher. Explain both facts.
  • 8 How many different alkenes of formula $\mathrm{C_{5}H_{10}}$ give 2-methylbutane on catalytic hydrogenation? Name them.
1 $\mathrm{2\,C_{2}H_{5}Br + 2\,Na \rightarrow C_{4}H_{10} + 2\,NaBr}$: butane. Water would react with sodium (giving $\mathrm{H_{2}}$ and NaOH) and destroy the reactive intermediates.
2 3: ethane ($\mathrm{CH_{3}{-}CH_{3}}$), butane ($\mathrm{CH_{3}{-}C_{3}H_{7}}$) and hexane ($\mathrm{C_{3}H_{7}{-}C_{3}H_{7}}$).
3 2-Bromopropane (or 2-iodopropane): isopropyl + isopropyl $=\mathrm{(CH_{3})_{2}CH{-}CH(CH_{3})_{2}}$.
4 $M(\mathrm{C_{3}H_{7}COONa})=4(12)+7+32+23=110\ \mathrm{g\,mol^{-1}}$; $n=0.100\ \mathrm{mol}$ of propane, $\mathrm{C_{3}H_{8}}$ ($44\ \mathrm{g\,mol^{-1}}$): 4.4 g.
5 $\mathrm{R=(CH_{3})_{2}CH}$, so R–R is 2,3-dimethylbutane. Per 2 mol salt: anode 1 mol alkane + 2 mol $\mathrm{CO_{2}}$, cathode 1 mol $\mathrm{H_{2}}$: 4 mol of gas (2,3-dimethylbutane boils at 331 K, so in a warm cell it leaves as vapour; JEE counts it among the anode products).
6 pentane (309 K) < 2,2-dimethylbutane (323 K) < 2-methylpentane (333 K) < hexane (342 K). More carbons raise the boiling point; among the $\mathrm{C_{6}}$ isomers, more branching means a smaller contact area and weaker dispersion forces.
7 Boiling: the near-spherical molecule touches its neighbours over a small area, so dispersion forces in the liquid are weaker. Melting: the compact, highly symmetrical molecules pack very efficiently in the crystal, so more energy is needed to break the lattice.
8 3: 2-methylbut-1-ene, 2-methylbut-2-ene and 3-methylbut-1-ene — all have the 2-methylbutane skeleton.
III
Conformations of ethane. Use $E(\varphi)=6.25\,(1+\cos3\varphi)\ \mathrm{kJ\,mol^{-1}}$ where a value is needed.
  • 1 How many staggered conformations does ethane pass through in one full turn ($0^{\circ}\le\varphi\lt360^{\circ}$) of one methyl group? At which angles?
  • 2 Find the torsional energy at $\varphi=40^{\circ}$.
  • 3 Assuming the barrier is shared equally among the eclipsed H/H pairs, find the energy cost of one H/H eclipsing interaction.
  • 4 Using $N_{1}/N_{2}=e^{\Delta E/RT}$, estimate the ratio of molecules near the staggered and near the eclipsed arrangement at 298 K ($R=8.314\ \mathrm{J\,mol^{-1}\,K^{-1}}$).
  • 5 Explain why the staggered and eclipsed forms of ethane cannot be separated at room temperature, although they differ in energy.
  • 6 Draw Newman projections of the staggered and eclipsed forms. In the staggered form, how many front/rear H pairs are anti (dihedral angle $180^{\circ}$)?
  • 7 Is the dipole moment of ethane zero in all its conformations? Do its C–C bond length and H–C–H angles change on rotation?
1 3, at $60^{\circ}$, $180^{\circ}$ and $300^{\circ}$ (and 3 eclipsed ones at $0^{\circ}$, $120^{\circ}$, $240^{\circ}$).
2 $6.25(1+\cos120^{\circ})=6.25\times0.5=$ 3.13 kJ mol⁻¹.
3 $12.5/3=$ 4.17 kJ mol⁻¹ per pair.
4 $\exp\!\left(\dfrac{12\,500}{8.314\times298}\right)=e^{5.05}\approx$ 155.
5 The barrier ($\approx12.5\ \mathrm{kJ\,mol^{-1}}$, about $5RT$) is crossed by collisions billions of times a second, so any separated sample would re-equilibrate at once. Isolable isomers need barriers of roughly $80\ \mathrm{kJ\,mol^{-1}}$ or more.
6 Staggered: each front H has one rear H directly opposite it, so there are 3 anti pairs (and 6 pairs at $60^{\circ}$). Eclipsed: 3 pairs at $0^{\circ}$, 6 at $120^{\circ}$.
7 Yes — every conformation of ethane is symmetrical enough (a threefold axis along C–C plus symmetry across it) for the small C–H bond dipoles to cancel. Bond lengths and angles stay essentially constant; only the dihedral angle changes.
IV
Halogenation, combustion and cracking.
  • 1 How many structurally different monochloro products does 2-methylpentane give? Name them.
  • 2 Find the percentage of 2-chloro-2-methylpropane formed on monochlorination of 2-methylpropane at 298 K.
  • 3 Find the percentage of 2-bromobutane formed on monobromination of butane.
  • 4 Why is direct fluorination of alkanes not used, and why must an oxidising agent be present for iodination? Balance the reaction of HI with iodic acid.
  • 5 Name the isomer of $\mathrm{C_{5}H_{12}}$, and the isomer of $\mathrm{C_{8}H_{18}}$, that gives only one monochloro derivative.
  • 6 How many moles of $\mathrm{O_{2}}$ are needed to burn 1 mol of pentane completely? Write the balanced equation.
  • 7 How much heat is released when $8.0\ \mathrm{g}$ of methane burns completely ($\Delta_{c}H^{\circ}=-890\ \mathrm{kJ\,mol^{-1}}$)?
  • 8 Write the termination steps for the chlorination of ethane and explain why a little butane is found among the products.
  • 9 Cracking of decane, $\mathrm{C_{10}H_{22}}$, gives octane and one other product. Identify it and balance the equation. What does aromatisation of hexane give?
1 5: 1-chloro-2-methylpentane, 2-chloro-2-methylpentane, 3-chloro-2-methylpentane, 2-chloro-4-methylpentane, 1-chloro-4-methylpentane (H sets: 6 × 1°, 1 × 3°, 2 × 2°, 2 × 2°, 3 × 1°).
2 $\dfrac{1\times5}{1\times5+9\times1}=\dfrac{5}{14}=$ 35.7%.
3 $\dfrac{4\times82}{4\times82+6\times1}=\dfrac{328}{334}=$ 98.2%.
4 Fluorine reacts explosively and breaks C–C bonds as well. Iodination is reversible: $\mathrm{CH_{4}+I_{2}\rightleftharpoons CH_{3}I+HI}$, and HI reduces $\mathrm{CH_{3}I}$ back; removing HI drives the reaction: $\mathrm{5\,HI+HIO_{3}\rightarrow3\,I_{2}+3\,H_{2}O}$.
5 2,2-Dimethylpropane (all 12 H equivalent) and 2,2,3,3-tetramethylbutane (all 18 H equivalent).
6 $\mathrm{C_{5}H_{12}+8\,O_{2}\rightarrow5\,CO_{2}+6\,H_{2}O}$: $\tfrac{3(5)+1}{2}=$ 8 mol.
7 $8.0/16=0.50\ \mathrm{mol}$; heat $=0.50\times890=$ 445 kJ.
8 $\mathrm{Cl^{\bullet}+{}^{\bullet}Cl\rightarrow Cl_{2}}$; $\mathrm{C_{2}H_{5}^{\bullet}+{}^{\bullet}Cl\rightarrow C_{2}H_{5}Cl}$; $\mathrm{C_{2}H_{5}^{\bullet}+{}^{\bullet}C_{2}H_{5}\rightarrow C_{4}H_{10}}$. Butane comes from two ethyl radicals combining — evidence that ethyl radicals are intermediates.
9 $\mathrm{C_{10}H_{22}\rightarrow C_{8}H_{18}+C_{2}H_{4}}$ (ethene). Aromatisation: $\mathrm{C_{6}H_{14}\rightarrow C_{6}H_{6}+4\,H_{2}}$, benzene.
🎯 Exam corner JEE Main · MCQJEE Main · Numerical

E1. JEE Main · MCQ The IUPAC name of $\mathrm{(CH_{3})_{3}C{-}CH_{2}{-}CH(CH_{3}){-}CH_{2}{-}CH_{3}}$ is (A) 3,5,5-trimethylhexane (B) 2,2,4-trimethylhexane (C) 1,1,1,3-tetramethylpentane (D) 2-tert-butyl-butane

Chain The longest chain runs from one methyl of the tert-butyl group to the ethyl end: 6 carbons, so the parent is hexane.
Locants From the tert-butyl end the methyls are at {2,2,4}; from the other end at {3,5,5}. First point of difference: 2 < 3.
Answer (B) 2,2,4-trimethylhexane.
⏱ Shortcut (C) and (D) both use a chain that is not the longest; a methyl at C1 is never allowed — it simply extends the chain.

E2. JEE Main · Numerical 2,2,4-Trimethylpentane is monochlorinated in light. What is the total number of monochloro products, counting stereoisomers separately? Give the answer to the nearest integer.

Sets $\mathrm{(CH_{3})_{3}C{-}CH_{2}{-}CH(CH_{3})_{2}}$: the three tert-butyl methyls (9 H), the $\mathrm{CH_{2}}$ (2 H), the CH (1 H), the two isopropyl methyls (6 H) — four structural products; the quaternary carbon has no H.
Chirality $\mathrm{ClCH_{2}C(CH_{3})_{2}CH_{2}CH(CH_{3})_{2}}$: achiral (1). $\mathrm{(CH_{3})_{3}CCHClCH(CH_{3})_{2}}$: C3 bears H, Cl, tert-butyl, isopropyl — chiral (2). $\mathrm{(CH_{3})_{3}CCH_{2}CCl(CH_{3})_{2}}$: achiral (1). $\mathrm{(CH_{3})_{3}CCH_{2}CH(CH_{3})CH_{2}Cl}$: C bears H, $\mathrm{CH_{3}}$, $\mathrm{CH_{2}Cl}$, neopentyl — chiral (2).
Answer $1+2+1+2=6$.

E3. JEE Main · MCQ Which statement about the conformations of ethane is correct? (A) The staggered and eclipsed forms can be separated by fractional distillation at room temperature. (B) The C–C bond is longer in the staggered form. (C) The eclipsed form has a dihedral angle of $0^{\circ}$ and lies about $12.5\ \mathrm{kJ\,mol^{-1}}$ above the staggered form because of torsional strain. (D) The staggered form has the higher energy because its hydrogens are farther apart.

Check each (A) No — the barrier is far too low; they interconvert rapidly. (B) No — rotation leaves bond lengths unchanged. (D) Reversed — the staggered form, with bond pairs farthest apart, is the more stable.
Answer (C).

E4. JEE Main · Numerical Propane is monochlorinated at 298 K. The relative reactivity of a 2° hydrogen to a 1° hydrogen is $3.8:1$. What percentage of the monochloro product is 2-chloropropane? Give the answer to the nearest integer.

Weights 2° H: $2\times3.8=7.6$; 1° H: $6\times1=6$; total $13.6$.
Percentage $\dfrac{7.6}{13.6}\times100=55.9\%$.
Answer $56$.
⏱ Shortcut Forgetting the number of H gives $3.8/4.8=79\%$; forgetting the reactivity gives $2/8=25\%$ — both are the classic wrong answers.

E5. JEE Main · MCQ An aqueous solution containing both sodium ethanoate and sodium propanoate is electrolysed using inert electrodes. The hydrocarbons formed at the anode are (A) methane and ethane only (B) ethane and butane only (C) propane only (D) ethane, propane and butane

Radicals Kolbe electrolysis turns $\mathrm{CH_{3}COO^{-}}$ into $\mathrm{CH_{3}^{\bullet}}$ and $\mathrm{C_{2}H_{5}COO^{-}}$ into $\mathrm{C_{2}H_{5}^{\bullet}}$ (each with loss of $\mathrm{CO_{2}}$).
Pairing $\mathrm{CH_{3}{-}CH_{3}}$, $\mathrm{CH_{3}{-}C_{2}H_{5}}$ and $\mathrm{C_{2}H_{5}{-}C_{2}H_{5}}$: ethane, propane and butane.
Answer (D).
⏱ Shortcut Two different radicals always give three coupling products — the same logic as a mixed Wurtz reaction.

E6. JEE Main · Numerical How many moles of oxygen are required for the complete combustion of 2 mol of octane, $\mathrm{C_{8}H_{18}}$? Give the answer to the nearest integer.

Equation $\mathrm{2\,C_{8}H_{18}+25\,O_{2}\rightarrow16\,CO_{2}+18\,H_{2}O}$.
Check O: $50=32+18$ ✓; per mole $\tfrac{3(8)+1}{2}=12.5$.
Answer $25$.
🔬 Research–Teaching NexusResearch-tutored · optional, about 60 minutes

Research question. Can a single number that describes the shape of an alkane skeleton predict its boiling point?

Why it matters. Refineries, fuel designers and environmental modellers need properties (boiling point, volatility, octane rating) of thousands of hydrocarbons that have never been measured. "Topological indices" — numbers computed from the bond graph of a molecule — were among the first tools of what is now called cheminformatics, and they still underlie models used to predict how fuels evaporate and how pollutants spread.

What to do.

  1. Collect the boiling points of all alkanes from $\mathrm{C_{4}}$ to $\mathrm{C_{7}}$ (19 compounds) from an open chemical database.
  2. For each, draw the carbon skeleton and compute the Wiener index $W$: the sum, over every pair of carbon atoms, of the number of bonds on the shortest path between them (e.g. butane: $W=10$; 2-methylpropane: $W=9$).
  3. Plot boiling point against $W$, and separately against the number of carbons. Within each group of isomers, does a smaller $W$ (more branched, more compact) mean a lower boiling point?
  4. Fit a model such as $T_{b}=a+b\,n+c\,W$ by least squares in a spreadsheet and report how far the worst prediction is from the measured value.

Tools: An open chemical database, paper or a short script for the path counts, a spreadsheet with a regression function.

Hand in: A table of $n$, $W$ and $T_{b}$, the two plots, your fitted equation, and a paragraph linking the trend to dispersion forces and contact area.

Going further. Try melting points instead. Why does the model fail badly for 2,2-dimethylpropane and 2,2,3,3-tetramethylbutane? What extra property of a molecule would you need to describe?

Instructor note: within each set of isomers $T_{b}$ falls with $W$ almost without exception; a two-variable fit in $n$ and $W$ typically predicts boiling points of $\mathrm{C_{4}}$–$\mathrm{C_{7}}$ alkanes to within a few kelvin. Melting points depend on crystal packing and symmetry and are poorly described by $W$ — a good discussion point about which properties are "molecular" and which are "solid-state".

🧪 Self-check quiz

0/5 correct

Q1. Sodium ethanoate is (i) heated with soda lime and (ii) electrolysed in aqueous solution (Kolbe). The organic products are

Q2. The number of structurally different monochloro derivatives of 3-methylpentane is

Q3. Among the isomers of $\mathrm{C_{5}H_{12}}$, the one with the lowest boiling point is

Q4. Which step is a propagation step in the chlorination of methane?

Q5. In the torsional energy curve of ethane, as the dihedral angle goes from $0^{\circ}$ to $360^{\circ}$ the energy passes through